Chemical Engineering Commons^™

Effect Of Concentration And Temperature Of Tio2-Al2o3 Hybrid Nanofluid On The Corrosion Rate Of Aluminum Radiator, Ratna Monasari, Rizky Maulana Ramadhan, Nike Nur Farida, Ahmad Hanif Firdaus, Supa Kusuma Aji, Yuniarto Agus Winoko, Rizkyansyah Alif Hidayatullah

Journal of Mechanical Engineering Science and Technology (JMEST)

Corrosion of aluminum radiators can reduce cooling system reliability and shorten service life in automotive applications. This study examines the effect of TiO₂-Al₂O₃ hybrid nanofluid concentration and temperature on the corrosion rate of commercially available aluminum radiator material. Hybrid nanoparticles with a TiO₂-Al₂O₃ mass ratio of 50:50 were dispersed in distilled water at concentrations of 0.6 wt.%, 0.8 wt.%, and 1.0 wt.%. Corrosion behavior was evaluated using a 14-day accelerated immersion test at 60°C and 80°C, and the corrosion rate was determined using the gravimetric mass loss method. The results …

Experimental Evaluation Of Membranes In The Recovery Of Hydrogen From Serpentinization, Rafael Dos Santos

LSU Master's Theses

Natural hydrogen generated through serpentinization reactions has emerged as a promising low-carbon energy resource. However, serpentinization-derived gas streams commonly contain methane (CH₄) and carbon dioxide (CO₂), requiring purification before hydrogen can be utilized in industrial applications. Membrane-based gas separation technologies offer a potentially cost-effective solution for hydrogen recovery; however, to the best of the author's knowledge, no previous studies have specifically investigated their application to serpentinization-derived gas streams.

This work evaluates the performance of two commercial polymeric membrane modules (Evonik and Generon) and one palladium-copper (Pd-Cu) membrane module (Okaya) for hydrogen recovery from gas compositions representative of serpentinization environments. An …

Straw As A Potential Vegetable Fibre Insulative Infill In Framed Constructions - Material Testing\Tnotereftnote1, Patrick Daly

Journal of Sustainable Construction Materials and Technologies

The construction sector faces increasing pressure to reduce embodied carbon and adopt circular material strategies, with bio-based materials offering a promising pathway. Straw-based insulation, particularly in loose-fill form, has gained traction in Europe, where several products have achieved certification under EAD 040138-01-1201. This study investigates the potential of Irish-processed straw chip as a bio-based insulative infill for framed construction by evaluating its material properties and thermal conductivity–density performance relative to European ETA-certified reference products. A programme of laboratory testing was undertaken on commercially available Irish straw samples, including material characterisation (moisture content, particle morphology, and dust content) and thermal conductivity …

Development And Characterization Of Mycelium-Based Biocomposites From Ganoderma Lucidum Using Spent Yerba Mate And Residual Sunflower Oil For Sustainable Insulation In Construction, Paula V. Alfieri, Guadalupe Canosa

Journal of Sustainable Construction Materials and Technologies

The construction industry urgently requires sustainable alternatives to petroleum-based insulation materials such as expanded polystyrene (EPS) and mineral wool. Mycelium-based biocomposites offer a promising solution by valorizing agricultural waste while delivering competitive thermal and acoustic performance. In this study, developed and characterized biocomposites using Ganoderma lucidum mycelium combined with spent yerba mate and residual sunflower oil (70 g/30 mL), both commonly generated as waste in Argentine institutions. Two formulations were evaluated: high density (HD: 280 ± 5 kg/m³) and low density (LD: 185 ± 5 kg/m³). Samples were cultivated for 90 days at 28 °C and 65% relative humidity and …

Comparative Life Cycle Assessment Of Hemp Walls In Residential Construction In Morocco, Hicham Kaddouri, Rachida Elbarghmi, Firyal Latrache, Marwane Hammouti, Abderrahim Abidouche, Ismael Driouch

Journal of Sustainable Construction Materials and Technologies

This study analyzes the energy and environmental performance of hemp-based wall solutions applied to Moroccan residential buildings by combining dynamic thermal simulation and life cycle assessment (LCA). A reference building is assessed under four representative Moroccan climates (Al Hoceima, Oujda, Marrakech, and Ouarzazate), comparing a conventional wall retrofitted with hemp plaster and a wall incorporating hemp concrete. The results show that hemp concrete significantly reduces annual heating and cooling energy demands by 20–24% depending on the climate, with heating needs decreasing by up to 40% and cooling needs by approximately 15%, particularly in hot and arid regions. The LCA reveals …

Dual-Waste Integration For Geotechnical Improvement: Silica Fume And Eggshell Ash In Kaolin Soil Stabilization, Ng Jun Shen, Muzamir Hasan, Siti Sarah Eliyun, Md. Ikramul Hoque, Mohamad Afiq Jazrin Mohamad Sidek

Journal of Sustainable Construction Materials and Technologies

This study reveals the potential substitution of silica fume and eggshell ash in the technique of soil stabilization, varying across distinct proportions in the modification of geotechnical parameters. The untreated kaolinitic soil which has low soil bearing capacity in nature is frequently reflected in its mechanical instability, for instance, soil settlement and extreme compressibility. By associating the industrial and agricultural material, it is potentially to resolve the above-mentioned issues with explicit designs. A number of laboratory approaches have been implemented in the assessment of basic geotechnical properties, including grain size distribution, Atterberg limits, specific gravity, proctor properties, and shear strength …

Performance Enhancement And Modeling Of Thermochemical Conversion Of Herbaceous And Hardwood Biomass Via Gasification With Integrated Sustainability Evaluation, Sanal Kumar Ap Mr

Theses and Dissertations

This thesis investigates the thermochemical conversion of three biomass feedstocks, namely Prosopis juliflora (PJ), Oryza sativa rice husk (RH), and Sesamum indicum stalk residue (SR), through experimental, simulation, and environmental analyses to evaluate their suitability for sustainable energy production. Thermogravimetric analysis (TGA) was conducted under inert conditions at multiple heating rates to study the thermal degradation and kinetic behavior of the biomasses.

Activation energy was evaluated using Kissinger, Flynn–Wall–Ozawa (FWO), Kissinger–Akahira–Sunose (KAS), Friedman, and Coats–Redfern methods. The results indicated that SR exhibited the highest thermal stability, followed by RH and PJ. Experimental gasification studies were carried out in a throatless …

Instructional Slides From Molten Salt Electrochemistry Symposium (Moses) 2026, Devin Rappleye, Carlos Mejia, Alex Peroff

Faculty Publications

This instructional slide set was developed for the 2026 Molten Salt Electrochemistry Symposium (MoSES) as an introduction and review of fundamental electrochemical concepts and methods used in molten salt systems. The material is intended for students, researchers, and practitioners seeking to better understand and interpret electrochemical measurements in high-temperature molten salts.

Topics include electrochemical thermodynamics, kinetics, mass transfer, electrode potentials, cyclic voltammetry, chronopotentiometry, chronoamperometry, square-wave voltammetry, electrochemical impedance spectroscopy (EIS), and common approaches for analyzing electrochemical data. Emphasis is placed on building physical intuition, understanding underlying assumptions, recognizing common experimental artifacts, and connecting electrochemical signals to real chemical and transport …

Direct Measurement Of Stem Position For Gas-Lift Valves While Flowing At High Pressure, Paulo E. Reitz

LSU Master's Theses

The present work challenges the idea of estimating the gas lift valves true dynamic stem position by providing an alternative capable of tracking the real stem position during flow tests. This is of interest for the improvement of performance determination tests and procedures that involve critical safety concerns, complex training and considerable investments, both in time and money. This scenario, together with the strong interest of industry for valve optimization and the scarcity of works available in literature, encouraged this study. An apparatus named Vision System was developed for tracking and measuring the stem position during flow tests. The developed …

Upar-Guided Dendrimer Gel Nanoparticles Reprogram Inflammation To Stabilize Atherosclerotic Plaques, Hsin Yin Chuang, Huari Kou, Yue-Wern Huang, Hu Yang

Biological Sciences Faculty Research & Creative Works

Atherosclerosis is characterized by lipid deposition, chronic inflammation, and apoptosis within the arterial wall, leading to plaque progression and instability. Current lipid-lowering therapies fail to fully address residual cardiovascular risk driven by local inflammation and cell death. Here, we report the development of uPA-functionalized, rapamycin-encapsulated dendrimer nanoparticles (G5PM-uPA/RA) that preferentially accumulate in urokinase plasminogen activator receptor (uPAR)-enriched atherosclerotic plaque, including macrophage- and apoptosis-rich lesion microenvironments. G5PM-uPA/RA was constructed by cross-linking reaction-enabled flash nanoprecipitation in a custom-made multi-inlet vortex mixer, followed by thiol-maleimide conjugation of uPA for uPAR-guided targeting. The nanoparticles demonstrated uniform morphology, favorable stability, and efficient rapamycin loading. In …

Vibro-Seismic Approach For Remediation Of Near-Wellbore Damage, Mounira Ahmed Abdallah

Theses and Dissertations

The research highlights the importance of vibro-seismic technology in the oil and gas industry. The primary objective of this study is to demonstrate how the vibro-seismic method enhances formation properties which are porosity, and permeability. Ultimately, this will lead to improved productivity and its application to remove the wellbore damage.

The research discusses whether or not the formation properties will be enhanced by the optimized acoustic vibration formation parameters. The thesis details laboratory experiments on core plugs, and four key findings are presented. The experimental work first showed that the use of the proper and optimum parameters enhanced the porosity …

Purification And Concentration Of Model Viruses Using Single-Pass Tangential Flow Filtration, Luis Alberto Mejía-Manzano, Lynn M. Manchester, Grace Wallis, Kan Wang, Bruce Lee, Michael Betenbaugh, Caryn Heldt

Michigan Tech Publications

The vaccine and viral vector industry is growing at an accelerated rate. To improve harvest and purification processes, the development of continuous membrane-based operations, such as normal flow filtration (NFF) and single pass tangential flow filtration (SPTFF) for concentration were explored. This work was conducted using two model viruses, non-enveloped porcine parvovirus (PPV) and enveloped Suid herpesvirus (SuHV). The viruses are in the same family as the gene therapy vectors adeno associated virus and herpes simplex virus, respectively. SPTFF design started with batch TFF for membrane selection. Hollow fiber membranes with a 100 and 300 kDa molecular weight cut off …

Performance Evaluation And Sustainable Benefits Of Using Metakaolin And Recycled Steel Fibers In Concrete, Lova Raju Surla, Ramprasad Naik Desavathu, Raja Murugadoss Jeyaraju

Journal of Sustainable Construction Materials and Technologies

The rapid accumulation of waste vehicle tires and the increasing demand for cement pose significant environmental challenges through land pollution and CO2 emissions. The combined use of recycled steel fibers (RSFs) recovered from waste tires and supplementary cementitious materials (SCMs) offers a sustainable solution to these issues. This study investigates concrete incorporating 20% fly ash (FA), varying metakaolin (MK) contents (4–16%), and RSF dosages of 0.5–1.5%. Mechanical properties (compressive, split tensile, and flexural strengths) and durability characteristics (sorptivity, water absorption, chloride permeability, and homogeneity) were evaluated at 7, 28, and 90 days. Results showed that the mixture containing 20% FA …

Climate-Responsive Design For Sustainable Construction: Passive Strategies In Domestic Architecture Supporting Sustainability, Nahed Chakouf

Journal of Sustainable Construction Materials and Technologies

This study explores climate-responsive design in domestic architecture, focusing on the application and effectiveness of passive strategies across various climatic regions, including the UK, hot-arid, tropical, and cold climates. A qualitative comparative case study method was used to explore different passive design strategies, integration of sustainability, procurement, the coordination of stakeholders, and compliance with regulations in residential architectural projects under varying climate conditions. Drawing from a combination of historical case studies and original architectural projects, the research evaluates how spatial configuration, material selection, solar orientation, shading, ventilation, and insulation are optimized to achieve thermal comfort and energy efficiency. In temperate …

Cellulose Membrane Performance And Properties With Focus On Dialysis Application, Juliana Marçal

Graduate Theses and Dissertations

Chronic kidney disease affects approximately 35 million individuals in the United States, with nearly 550,000 patients dependent on dialysis for survival. Chronic kidney disease and end stage kidney disease impose substantial burdens on patients and healthcare systems, driving demand for improved dialysis membranes with enhanced flux, selectivity, and biocompatibility. The performance of dialysis membranes plays a critical role in treatment efficiency, governing solute transport, fluid removal, and overall therapeutic outcomes. In hemodialysis, membranes must achieve an optimal balance between high permeability and selective solute rejection while maintaining mechanical stability and long-term biocompatibility. Conventional dialysis membranes are commonly fabricated from polymeric …

Decoration Of Lactic Acid Bacterium By Exploiting In Vitro Sortase A Transpeptidase, Faisal Hamd Alqhtani

Graduate Theses and Dissertations

Attaching a drug module to the surface of lactic acid bacteria was the main aim of this dissertation, and it was achieved. By using the Sortase A mechanism, the drug module (green fluorescent protein fused to the LPETG motif) was anchored to the LAB surface. To reach the final results, this dissertation will describe the process that I undertake to achieve the end goal. Modifying media, producing pure enzymes with less impurity, and reducing the protease activity in E. coli BL21 were all described in this five-chapter dissertation. Keywords: drug delivery, lactic acid bacteria, green fluorescent protein, sortase A, fusion …

Establishing Sustainability As A Material Property In An Introduction To Materials Science And Engineering Course (Poster), Caitlin Adams

Faculty Publications - Chemical Engineering

No abstract provided.

Dimpled Surfaces For Thermal Performance Enhancement In Solar Collectors, Furqan Jamil, Baig, Amna Adil, Aasia Farrukh

Research outputs 2022 to 2026

With escalating environmental concerns, solar energy is a feasible approach to support a sustainable environment, considering the pressing need to move away from fossil fuels. Optimizing solar collector’s efficiency improves energy capture and lowers carbon emissions. One innovative technique is to the surface of solar collectors. The heat transfer is greatly increased by adding such tiny indentations, encouraging turbulence in the incoming working fluid. The article reviews the effect of dimples on the efficiency of various collector applications, including flat plate collector, solar water heaters, solar air collectors, parabolic trough solar collectors, photovoltaic thermal systems, desalination, and many others. The …

Impact Of Capillary Imbibition On Development Of Unconventional Oilfields: A Five-Year Review, Yihang Xiao, You, Yongming He, Han Xu, Lei Wang, Yujie Yuan

Research outputs 2022 to 2026

The imbibition process, which is characterized by the displacement of non-wetting phase by wetting phase in porous media, plays a crucial role in enhancing oil recovery of unconventional reservoirs. However, due to the complex nature of reservoir characteristics and fluid properties, existing research on this phenomenon presents contradictory conclusions and interpretations. This paper aims to fill this knowledge gap by providing a comprehensive review of the fundamental concepts, primary mechanical factors, and critical influences in oil-water imbibition. Primary mechanisms, including capillary, viscous, gravitational, hydrostatic, inertial, capillary back, dead end, and osmotic forces, are analyzed in terms of their key roles …

Pfas Quantification Using Solid Phase Extraction And Low Field Nuclear Magnetic Resonance (Spe-Nmr), Nicholas N.A. Ling, Ghasemi, Ella Shilliday, Masoumeh Zargar, Einar Fridjonsson, Michael L. Johns

Research outputs 2022 to 2026

Per- and polyfluoroalkyl substances (PFAS) are synthetic chemicals that are highly resistant to biodegradation. Due to their bioaccumulation, long-term persistence, and adverse human health effects, they have been classified as organic pollutants. The leaching of PFAS into water sources has resulted in their detection in global drinking water supplies. To mitigate adverse health effects and minimise environmental damage, regulations regarding maximum allowable PFAS concentrations in water have been imposed. Traditional PFAS in water quantification methods, such as liquid chromatography–mass spectrometry (LC–MS), gas chromatography–mass spectrometry (GC–MS), and high-performance liquid chromatography (HPLC), have intrinsic limitations that pose challenges in such PFAS analysis. …

Neural Network Technologies In The Automatical Control Systems Of Absorption Process For Pureficating Natural Gas, Abdishukurov Maqsudovich Shavkat Mr, Xuecheng Li Li Xuecheng Mr

Technical science and innovation

Analysis of methods and algorithms for synthesizing adaptive control systems for technological processes based on the neural network approach is carried out in this search. The stages of mathematical modeling of complex technological processes using neural network technology were considered. Additionally, an algorithm for solving the interpolation and extrapolation problem that arises in the training process a neural network to control system was proposed. At the final stage of this article, algorithms based on neural network technology are synthesized for the control system for the parameters of the technological process of natural gas purification by absorption

Comparative Catalytic Pyrolysis Of Wheat Straw For Enhanced Bio-Oil Production, Nourhan H. Khashaba, Noura F. Abdelsalam, Hany A. Elazab, Mamdouh A. Gadalla, Thokozani Majozi, Fatma H. Ashour

Chemical and Biochemical Engineering Faculty Research & Creative Works

Catalytic fast pyrolysis of lignocellulosic biomass is a promising thermochemical route for producing renewable biofuels and value-added chemicals. Many African countries have abundant underutilized agricultural residues whose reuse can improve waste management while reducing reliance on fossil fuels. This study used wheat straw as a representative residue to examine how two catalysts—zinc oxide (ZnO) and cement kiln dust (CKD)—affect bio-oil yield and quality. Bench-scale experiments were performed in a fixed-bed reactor under an inert nitrogen atmosphere at 500–600 °C. Each catalyst was tested separately at loadings from 0 to 7 g per 500 g of biomass to evaluate impacts on …

The Open Wiki Of Electrochemical Methods (Owem): A Community-Driven Educational Resource, Anderson Fuller, Devin Rappleye

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

The traditional resources for learning electrochemical methods—textbooks, academic literature, and university coursework—remain essential but are limited in accessibility, update frequency, and practical usability. This paper introduces the Open Wiki of Electrochemical Methods (OWEM), an open-access, community-driven platform designed to complement these resources. OWEM organizes content into equations, definitions, methods, tutorials, and supplementary articles, with a heavy emphasis on experimental relevance. A case study on cyclic voltammetry demonstrates how OWEM consolidates foundational theory, lesser-known results, and practical guidance within a continuously maintainable framework to benefit the broader electrochemistry community.

Compound Role Of Using Advanced Materials And Design Procedures On Improving The Performance Of Baghdad Buildings Facades, Abeer Qasim Jbur

Al-Esraa University College Journal for Engineering Sciences

The research idea addresses improving the thermal performance of buildings in Baghdad by selecting and employing facade materials to reduce heat gain and energy consumption associated with cooling in a hot-dry climate. The study discusses the pivotal role of facade materials in interacting with solar radiation, heat transfer, and inward thermal transmittance, as well as their capacity to store and release heat in ways that maintain thermal comfort within architectural spaces and reduce reliance on mechanical cooling systems. A range of traditional materials such as stone, earth, and concrete is presented alongside modern materials like high-performance glass and thermal storage …

Current Condition Of The Holy Kadhimiya Shrine Surveying Using A Gpr, Israa Hatem

Al-Esraa University College Journal for Engineering Sciences

This study describes the extensive survey of the Holy Kadhimiya Shrine in Baghdad, Iraq, carried out with the use of a non-invasive geophysical instrument called Ground Penetrating Radar (GPR) to assess the conditions of subsurface and the condition of the infrastructure in the site. The total area of the shrine is 19,575 m² that was systematically studied with the help of internal measures, satellite imagery and radar profiling. The frequency antennas used for the GPR survey were the 250 MHz, 500 MHz, and 800 MHz which have a penetration depth of 1-15 m. Specialized software packages (Ground Vision, Reexplore …

Static Analysis-Based Android Malware Detection (2021–2026): A Systematic Survey And Taxonomy, Ali Hussein Mohammed Ali, Musaab Riyadh Abdulrazzaq

Al-Esraa University College Journal for Engineering Sciences

Android malware is not only increasing in size and sophistication but is also a challenge to be detected on a large scale. Static analysis is popular due to its ability to detect malware without running applications or tracing run-time events. However, features, datasets, labeling methods, and assessment methodology differ, which makes studying performance difficult. This is a systematic study of 78 peer reviewed articles written between 2021 and 2026 regarding the Android malware detection by static analysis. In each of the studies, the current survey cover the following feature source, feature representation and engineering, learning paradigms, datasets and labeling methods, …

Guided Mind Mapping For Enhancing Spatial Thinking In First-Year Architectural Design Studios, Noor Ayad Rashid, Mustafa Kamil Al-Khafaji

Al-Esraa University College Journal for Engineering Sciences

Spatial thinking constitutes a core cognitive ability in early architectural design education, enabling students to interpret, organize, and transform spatial relationships into coherent architectural configurations. Despite its importance, studio practice often indicates that first-year students rely on surface-level representation rather than engaging in structured spatial reasoning, which leads to fragmented compositions and weak spatial coherence. Accordingly, this study investigates the following research question: To what extent can guided mind mapping support the development of spatial thinking in early architectural design studios? A quasi-experimental design was adopted to examine the impact of structured visual–cognitive guidance on students' spatial reasoning. The study …

Multiaxial Stress And Deformation Analysis In Mechanical Structures Under Variable Dynamic Loads, Aqeel Naeem Fareed Al-Khafaji

Al-Esraa University College Journal for Engineering Sciences

Piping supports in gas and process facilities in Iraq are routinely exposed to operational vibration and moderate seismic actions, creating multiaxial, variable dynamic loads that are not fully captured by conventional uniaxial, static design checks. Welded brackets, in particular, are prone to local stress concentration and fatigue at weld toes. This study aims to quantify the multiaxial stress and deformation response of a welded steel pipeline support bracket under variable dynamic loading and to assess the implications for structural integrity and design practice. It was demonstrated by the development and validation of a three-dimensional finite element model of a bracket-pipe …

Real-Time Adaptive Control Of Machining Parameters In Cnc Milling Using An Ensemble Digital Twin And In-Process Vibration Monitoring For Enhanced Surface Integrity, Ali Qasim Abdulwahid

Al-Esraa University College Journal for Engineering Sciences

Achieving consistent surface integrity in CNC milling under varying materials and degraded tool conditions remains a critical challenge because fixed cutting parameters often induce regenerative chatter, accelerate tool wear, and cause surface and subsurface damage. This paper presents an integrated solution that combines an Ensemble Digital Twin (EDT), real-time in-process vibration monitoring, and a hybrid adaptive controller to maintain high surface quality while preserving productivity. The EDT fuses a physics-based milling dynamics model with a recurrent LSTM surrogate through a context-aware meta-learner that weights model outputs by process state (e.g., tool wear, engagement). A compact real-time monitoring pipeline computes a …

Evaluation Of Mimo Antenna Configurations For High Data-Rate Systems, Ammar Abdulimam Abbood

Al-Esraa University College Journal for Engineering Sciences

This paper introduces a new design of cat-shaped antenna in super wideband (SWB) and high data-rate multiple input multiple output (MIMO) systems. The single-element SWB antenna has a wide frequency range of 2.23 GHz up to more than 100 GHz with outstanding bandwidth ratio (BW Ratio = 44.84:1), fractional bandwidth (FBW = 191%), bandwidth dimensional ratio (BDR = 5567) and a peak gain of 9.52 dB. The single antenna was also expanded to 2 × 2 MIMO array to further improve performance on multipath environments. Measurements and simulation show very good results using radiation patterns, isolation, channel capacity loss (CCL), …