Chemical Engineering Commons^™

Chemical Recycling Of Pet Plastic Waste, Charlie Parker, Benjamin Puga, Jake Verschoor

Materials Engineering

The growing accumulation of plastic waste, specifically polyethylene terephthalate (PET), has driven the need for more efficient and scalable chemical recycling methods. This study investigated the methanolysis of PET using zinc oxide (ZnO) nanoparticles as a catalyst and tetrabutylammonium chloride (NBu₄Cl) as an ionic liquid, aiming to reduce methanol consumption while achieving high PET conversion efficiency. ZnO nanoparticles were synthesized via wet chemistry and characterized using Dynamic Light Scattering (DLS), which showed an average particle size of 13.5 nm with a polydispersity index of 0.1556, indicating a moderately-high monodisperse distribution of particles sufficient for reactions. The main conversion product, dimethyl …

Performance Evaluation Of Aminated Multi-Walled Carbon Nanotubes Incorporated With Green Synthesized Iron Nanoparticles For Toxic Dyes Sequestration From Textile Wastewater, Titus Chinedu Egbosiuba, Cynthia Chukwuemeka, Jonah Chukwudi Umeuzuegbu, Nwanneka Chibuzo Mmonwuba, Ugochukwu Ewuzie, Monday Uchenna Okoronkwo, Valentine Chikaodili Anadebe, Saheed Mustapha, Ambali Saka Abdulkareem, Jimoh Oladejo Tijani, Ashish Patel, Virendra Kumar Yadav

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study evaluates the performance of aminated multi-walled carbon nanotubes (AM-MWCNTs) integrated with zerovalent iron nanoparticles (ZVI) synthesized using cashew leaf (Anacardium occidentale) extract (AM-MWCNTs@ZVI) for the removal of Congo Red (CR) and Methylene Blue (MB) dyes from textile industrial wastewater. The nanocomposite was characterized using FTIR, XRD, BET, HRSEM, and HRTEM analyses, confirming its functional groups, crystalline structure, and enhanced surface area of 1050.4 m²/g. The ecological risk degree of the textile pollutants was assessed to determine the percentage concentrations of crystal violet, Congo red, methyl orange, methylene blue and rhodamine B. Batch adsorption experiments identified optimal …

Student-Led Video Podcasting In A Chemical Behavior Of Materials Course, Erick Salvador Vasquez

Chemical and Materials Engineering Faculty Publications

Video podcasts, or vodcasts, are a form of podcasting that combines video and audio to deliver various types of educational content effectively. To our knowledge, very few studies have focused on student-produced podcasting for learning technical engineering concepts. This study explores using student-created technical videos in a course on the chemical behavior of materials through three separate assignments. The first assignment centered on sustainability aspects. Students, divided into groups of three, were tasked to review two influential journal articles on plastic waste input into the ocean and metal recycling. Each group had to prepare and deliver a technical script about …

Effect Of Household Oil Contamination And Agricultural Soil Contamination On Phyllosilicate Nanocatalyst Performance During Pyrolysis Of Polyolefins, Joey Velasquez

Master's Theses

The effect of household oil and agricultural soil contamination on catalyst performance during polyolefin pyrolysis was simulated on mixed virgin plastic pellets by evaluating contamination influence on mixed plastic degradation temperatures. Three phyllosilicate nanocatalysts including Fulcat435, Fulcat22F and Y-Zeolite were evaluated in this work based on a literature review of catalyzed plastic pyrolysis and these catalysts’ ability to lower plastic decomposition temperature by 50 °C – 100 °C. These findings were confirmed in this research through thermogravimetric analysis of a polyolefin mixture and further developed in furnace experiments containing household oil and agricultural contamination. Household oil contamination deactivated each of …

Optimized Electrocoagulation Pre-Treatment For Fouling Reduction During Nanofiltration Of Lake Water Containing Microcystin-Lr, Thomas Mckean, Chidambaram Tharmaraiselvan, Sarah Do, S. Ranil Wickramasinghe

Chemical Engineering Faculty Publications and Presentations

Microcystin-LR (MCLR) is a toxin produced by harmful algal blooms that is emerging as a threat to drinking and recreational water systems worldwide. Nanofiltration (NF) is an effective technique for purifying contaminated water sources; however, membrane fouling caused by coexisting organic matter limits the practicality of the process. This research studies the use of an electrocoagulation (EC) pretreatment to limit fouling during the NF process. Water for this study was taken from Lake Fayetteville, a local body of water where MCLR concentrations have been recorded to be >15 µg/L. EC was performed using polyaluminum chloride as a background electrolyte at …

Investigation Of Retention And Dehydration Of Preformed Particle Gel For Conformance Control In Fractured Carbonates, Abdulaziz A. Almakimi, Abdullah O. Almansour, Junchen Liu, Baojun Bai, Ibnelwaleed A. Hussein

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Preformed particle gel (PPG) treatment has proved to be among the most effective methods to reduce excessive water production in fractured reservoirs. The blocking ability of PPGs to fractures or fracture-like features is highly dependent on injected gel properties and volume. Gel dehydration during extrusion through fracture is common and has a considerable effect on gel properties, transport, and plugging efficiency. As the gel particles propagate through the fracture, continuous dehydration is often associated and causes the gel to concentrate and require high-pressure gradients to move. Dehydration might be desirable to a certain limit because it can help to form …

Investigation And Prediction Of Excessive Water Production In Bottom Water-Drive Naturally Fractured Reservoirs Using Machine And Deep Learning, Sami Abderraouf Belkhir

Theses

Naturally Fractured Reservoirs (NFRs) are characterized by dual-porosity and dual-permeability systems, posing significant challenges in managing water production due to highly conductive fracture networks that facilitate rapid water migration from bottom aquifers, often bypassing oil stored in the matrix, thus resulting in early water breakthrough and water channeling phenomena. The main objective of this thesis is to develop and validate deep learning and machine learning models to predict water production, water breakthrough time (tbt), and ultimate water cut (WCult) in NFRs, thereby enabling more effective reservoir management strategies. This work also aims to evaluate the sensitivity of water behavior to …

Data-Driven Machine Learning Applications For Predictive Modeling Of Petrochemical And Ecofriendly Systems, Noora Saleh Al Mansoori

Theses

Traditional experimental approaches in industrial processes, such as Fourier Transform Infrared Spectroscopy (FTIR) spectroscopy, thermogravimetric analysis (TGA), and well-drilling operations, are often constrained by time, cost, and operational limitations. This research explores the application of data-driven Machine Learning (ML)-based predictive modeling to improve efficiency and reduce dependency on resource-intensive experimentation. The study develops ML models for three distinct processes: FTIR intensity prediction of bitumen thermal cracking products, thermal degradation of Medium-Density Fibreboard (MDF) using TGA data, and Rate of Penetration (ROP) prediction in petrochemical industry. Six algorithms: Linear Regression (LinReg), Partial Least Squares Regression (PLSR), Support Vector Regression (SVR), Gradient …

Experimental Evaluation Of Novel Nano Polymer Hybrid Enhanced Oil Recovery In Carbonate Reservoir, Altamish Ahmed Pakeer

Theses

Innovative enhanced oil recovery (EOR) strategies are needed to unlock additional reserves in heterogeneous, oil-wet carbonate reservoirs. This study evaluates hybrid nano-polymer flooding by integrating silica nanoparticles (SiO₂) and single-walled carbon nanotubes (CNT) with novel HPAM polymers (Sav10 and Sav10 VHM) to optimize wettability alteration, rheological parameters, and recovery mechanisms.

A comprehensive experimental approach was employed, where rheological tests assessed viscosity enhancement under varying shear conditions, and wettability alteration was quantified via contact angle measurements using HPAM-SiO₂, HPAM-CNT, Sav10 VHM-SiO₂, and Sav10 VHM-CNT systems. Core floods were performed in three consecutive phases; waterflooding (baseline), standalone nanoparticle flooding, and hybrid nano-polymer …

Utilizing Date Fruit Pomace As A Corrosion Green Inhibitor For Non Ferrous Alloys, Sardor Rustam Odilov

Theses

This thesis explores a novel green corrosion inhibitor derived from date fruit pomace extract (DFPE) for the protection of aluminum alloy 3003 in highly corrosive environments, specifically hydrochloric acid (HCl) and natural seawater. The central aim is to promote the sustainable reuse of agro-waste as an effective and eco-friendly alternative to conventional toxic inhibitors, aligning with environmental and industrial safety goals.

A comprehensive methodology was employed, including Soxhlet extraction (using both non-polar n-hexane and polar methanol-water solvents), rotary evaporation, and FTIR analysis to identify the active functional groups responsible for inhibition. Corrosion behavior was systematically evaluated using both mechanical (weight …

Interaction Of Liquid Phase Diisopropyl Methyl Phosphonate (Dimp) With Material Surrogates For Components Of Soil And Combustion Products Of Metal Fuels, Khushi Sunil Patel

Theses

Combustion products of three different Al-based materials, Al-CaCO₃, Al-SiO₂, and Al-Fe₂O₃ , have been produced to understand their interaction with liquid diisopropyl methyl phosphonate (DIMP), a surrogate for chemical weapon agents. The purpose of this is to see which materials were more effective at DIMP adsorption and decomposition at different temperatures. Prepared materials were characterized using electron microscopy, x-ray powder diffraction, and nitrogen adsorption. Prepared powders were submerged in DIMP and heated in a thermal analyzer, tracking the mass changes as a function of temperature. Surfaces of the recovered materials were studied using …

Interfacial Phenomena Of Plastics: From Surface Modifications To Environmental Impacts, Kennedy Guillot

LSU Doctoral Dissertations

Plastic is a ubiquitous part of everyday life since its introduction in the previous century. Global production continues to exponentially increase, establishing plastics as one of the most dominant materials in modern manufacturing. Within the scope of academia, plastic is essential due to its low cost and sterility, particularly for minimizing contamination. Beyond the laboratory, plastic use spans numerous industries, and its use and disposal has since raised many environmental concerns. Once valued for its durability, plastics now pollute the environment in landfills and natural ecosystems. In recent decades, the consequences of this pollution have been investigated, yet the full …

Preparation And Modification Of Mxene Composites For Application In Electrochemical Energy Storage, Zhang-Hai You, Ding-Ze Lu, Kiran Kumar Kondamareddy, Wen-Ju Gu, Peng-Fei Cheng, Jing-Xuan Yang, Rui Zheng, Hong-Mei Wang

Journal of Electrochemistry

With the acceleration of advanced industrialization and urbanization, the environment is deteriorating rapidly, and non-renewable energy resources are depleted. The gradual advent of potential clean energy storage technologies is particularly urgent. Electrochemical energy storage technologies have been widely used in multiple fields, especially supercapacitors and rechargeable batteries, as vital elements of storing renewable energy. In recent years, two-dimensional material MXene has shown great potential in energy and multiple application fields thanks to its excellent electrical properties, large specific surface area, and tunability. Based on the layered materials of MXene, researchers have successfully achieved the dual functions of energy storage and …

Three-Dimensional Melamine Carbon Sponge/Nai As Cathode Materials For Sodium-Ion Batteries, Qian-Ying Huang, Yue Liu, Zi-Xin Lin, Shu-Yi Zheng, Ting-Ting Mei, Yu-Ting Tang, Ying-He Zhang, Jun Liu

Journal of Electrochemistry

The sodium-iodine (Na-I) battery exhibits significant potential as an alternative energy storage device to the lithium-ion battery. However, its development is hindered by inadequate electrical and thermal stability, as well as the dissolution and shuttling of polyiodide. In this study, we report a preparation method for melamine carbon sponge (MC) via carbonizing a commercially available kitchen sponge. It was revealed that the as-prepared MC, composed of unique self-growing carbon nanotubes, could provide both physical and chemical adsorption capabilities for intermediate polyiodides to improve the electrochemical performance of NaI. Consequently, the NaI/MC electrode effectively minimized polyiodide dissolution and reduced the electrochemical …

Understanding The Morphology And Mass Transport Resistance Of Mesoporous Carbon-Supported Pemfc Based On Modeling Analysis, Hao Deng, Jia Liu, Zhong-Jun Hou

Journal of Electrochemistry

Mesoporous carbon supports mitigate Pt sulfonic poisoning through nanopore-confined Pt deposition, yet their morphological impacts on oxygen transport remain unclear. This study integrates carbon support morphology simulation with an enhanced agglomerate model to establish a mathematical framework elucidating pore evolution, Pt utilization, and oxygen transport in catalyst layers. Results demonstrate dominant local mass transport resistance governed by three factors: (1) active site density dictating oxygen flux; (2) ionomer film thickness defining shortest transport path; (3) ionomer-to-Pt surface area ratio modulating practical pathway length. At low ionomer-to-carbon (I/C) ratios, limited active sites elevate resistance (Factor 1 dominant). Higher I/C ratios improve …

Theoretical Insights Into The Atomic And Electronic Structures Of Polyperyleneimide: On The Origin Of Photocatalytic Oxygen Evolution Activity, Yi-Qing Wang, Zhi Lin, Ming-Tao Li, Shao-Hua Shen

Journal of Electrochemistry

Polymeric perylene diimide (PDI) has been evidenced as a good candidate for photocatalytic water oxidation, yet the origin of the photocatalytic oxygen evolution activity remains unclear and needs further exploration. Herein, with crystal and atomic structures of the self-assembled PDI revealed from the X-ray diffraction pattern, the electronic structure is theoretically illustrated by the first-principles density functional theory calculations, suggesting the suitable band structure and the direct electronic transition for efficient photocatalytic oxygen evolution over PDI. It is confirmed that the carbonyl O atoms on the conjugation structure serve as the active sites for oxygen evolution reaction by the crystal …

Investigating Structure-Property Relationships Of Bio-Inspired Gel, Mohammad Moinul Hossain

Theses and Dissertations

High-modulus, stretchable, and resilient hydrogels possess a wide array of promising applications across multiple fields, such as the development of sophisticated prosthetic devices, artificial skin, electronic devices, and soft robotics. Elastomeric biopolymers, like resilin, show high stretchability and resilience, facilitating power-amplified movement in various species essential for feeding and defense mechanisms. To mimic the properties of resilin, we developed a hydrogel system of hydrophobic and hydrophilic components. These gels are synthesized by free radical polymerization of acrylic acid (AAc), methacrylamide (MAM), n-tert-beutylacrylamide (BAM) or n-isopropylacrylamide (NIPAM), and poly (propylene glycol) diacrylate (PPGDA). This research aims to compare the large-strain mechanical …

Zn–Assisted Synthesis Of M (Mn/Fe/Co/Ni)-N-C Catalysts For Multifunctional Electrochemical Activity, Kemila A. Chaudhary

Electronic Theses & Dissertations

The design and development of atomically dispersed M-N-C catalysts (metal (M) supported on an nitrogen-carbon (NC) matrix with high multifunctional electrocatalytic performance is desirable but proved to be very challenging. Herein, we synthesized M-N-C catalysts (M = Fe, Co, Mn, and Ni) using Zn-assisted high temperature treatment and characterized using various techniques. The prepared catalysts were tested for their electrocatalytic performance towards oxygen and hydrogen evolution reaction (OER and HER) as well as oxygen reduction reaction (ORR) in alkaline media. The results indicated that Mn-N-C catalyst showed higher performance towards both the ORR (E_1/2 = 0.90 V) and …

Instability-Driven Phase Separation For Quantum Structure Formation In Iii-V Semiconductors, Leonid Miroshnik

Chemical and Biological Engineering ETDs

High temperature phase instability limits the performance of III-V zinc blende semiconductor devices. A technique using an encapsulant and sacrificial layer is developed to reduce thermal degradation by group V sublimation during thermal processing of InGaAs/GaAs structures. This technique is successful in preventing As sublimation and preserving an atomically smooth surface required for surface-sensitive characterization. The degradation of the GaAsSb/InP interface by phase separation is studied. Significant interdiffusion and intermixing occurs due to the formation of a molten InSb at the interface. The intermixing is driven by phase separation and melting of the InSb interfacial layer that enhances atomic mobility. …

Reconfiguration-Driven Assembly Of Inorganic Nanomembranes, Divya Jyoti Prakash

Chemical and Biological Engineering ETDs

This thesis focuses on the guided self-assembly of metastable nanomembranes (NMs) that are either amorphous or polycrystalline. Guided self-assembly of NMs is a robust and scalable method to obtain a variety of three-dimensional structures such as helices, rolled-up tubes, and networks of interconnected channels. These 3D structures have important applications as on-chip actuators, sensors, inductors, transformers, waveguides, and antennas. Furthermore, a large amount of strain and strain gradient can be imparted in NMs by bending them to a nanoscale and microscale radius of curvature, making guided self-assembly on NMs a viable route to extreme strain engineering of amorphous and polycrystalline …

Utilization Of Imidazolium Ionic Liquids For Enhanced Oil Recovery In Harsh Emirati Tight Carbonate Oil Reservoirs, Noran Hussein Mousa

Thesis/ Dissertation Defenses

In response to the increasing global demand for energy and the limitations of traditional chemical oil recovery methods. This study explores the potential of imidazolium-based ionic liquids (ILs) as enhanced oil recovery (EOR) agents for Emirati tight oil reservoirs. Four ILs—C10mimCl, C12mimCl, C12mimBF4, and C16mimBr—were evaluated for their effects on interfacial tension (IFT), wettability, emulsification, and rheological properties under reservoir conditions. Experiments conducted at varying temperatures (up to 110°C), IL concentrations (100–3000 ppm), and salinities demonstrated that longer alkyl chain ILs, particularly C16mimBr, effectively reduced IFT by >99% and improved wettability by lowering contact angles up to 15.37°. Statistical modeling …

In-Silico Investigation Of Claudin-16 Self Assembly In Tight Junctions, Baqi Ozomata Atimah

Theses - ALL

Claudin-16 is a member of the Claudin family of proteins, which play a critical role in establishing paracellular permeability within tight junctions between cells. Claudin-16 exhibits diverse properties related to ion selectivity, tissue development, and barrier function. Depending on the context, claudins create channels that permit the passage of specific ions through the paracellular space or form barriers that restrict ion movement. This study focuses on the self-assembly of the human claudin-16 protein, which is essential for ion reabsorption and the proper functioning of the kidney. Molecular simulations were employed to investigate the interactions within dimerized claudin-16 and to elucidate …

Adaptive Noise Estimation And Denoising With Deep Learning For Nmr Spectroscopy, Naveen Asokan

McKelvey School of Engineering Graduate Student Theses & Dissertations

Nuclear Magnetic Resonance (NMR) spectroscopy is a powerful analytical technique widely used for molecular structure elucidation in chemistry, biology, and medicine. However, spectral accuracy is often degraded by noise—particularly in low acquisition time settings—resulting in reduced resolution and obscured chemical features. While traditional noise reduction techniques such as signal averaging can improve spectral quality, they require longer acquisition times, limiting their utility in real-time and high-throughput applications.

This thesis presents a deep learning-based denoising framework designed to enhance the quality of complex-valued NMR spectra. The proposed model, built upon a U-Net architecture, incorporates both real and imaginary components of the …

Predicting Sorption Of Diverse Organic Compounds In Soil-Water Systems: Meta-Analysis, Machine Learning Modeling, And Global Soil Mapping, Jiachun Sun, Kai Zhang, Huichun Zhang

Faculty Scholarship

In recent decades, the environmental detection of various organic compounds (OCs) has highlighted the limitations of conventional soil-water sorption models, which simplify complex experimental conditions and often overlook OCs with polyfunctional and ionizable structures. To address these shortcomings, we compiled a comprehensive soil-water sorption dataset encompassing 20,945 data points for 419 OCs with various functional groups and 1037 different soils. Meta-analysis of the dataset revealed the trends of soil sorption associated with OC substructures, soil properties, and solution conditions. Machine learning models employing the XGBoost algorithm, in conjunction with MACCS fingerprints and experimental conditions, were developed to cover the entire …

Toxicity And Biodegradability Of Novel Boronium Vs Conventional Ammonium Based Anti Microbial Compounds In Wastewater Treatment Systems, Noor Shalan

Poster Presentations

Quaternary ammonium compounds (QACs) are highly effective as disinfectants, herbicides, and pesticides; thus, overuse causes elevated levels of residual toxicity in domestic and industrial wastewater. QACs can be toxic to essential bacteria breaking down pollutants in wastewater treatment plants (WWTPs) and can remain untreated in effluent, harming the environment, and contributing to antibiotic resistance, posing risks to human health. Novel boronium-based antimicrobial compounds have demonstrated efficacy in eliminating bacteria, fungi, and viruses. If the boronium compounds exhibit lower residual toxicity, they could offer a promising alternative to QACs. Because these compounds are still in development, their potential toxicity to the …

Binary Solid/Liquid Equilibrium Of Mixtures Of Thermally Robust Salts And Molecular Compounds For Use As Heat Transfer Fluids, Jared Ridge Mathews

Poster Presentations

Fossil fuels, contributors to climate change that may bear catastrophic consequences, power the entire world. The human species is almost entirely dependent on fossil fuels for energy, but other sources of renewable and environmentally friendly energy must be developed. Concentrated solar power (CSP) is a promising source of renewable energy with hampered potential—better heat transfer fluids (HTFs) are needed for it to be economically feasible. Currently, the HTFs in industrial use are predominantly either synthetic oils or nitrate-based molten salts. Synthetic oils are only stable up to 400 °C, and molten salts often have high melting temperatures, making them prone …

Assessment Of H2s-Induced Cracking Susceptibility In Steam Line Pipes And Weld Zones During Geothermal Well Construction, Riene Kaelamanda Pragitta, Yudha Pratesa

Journal of Materials Exploration and Findings

The susceptibility of steam line pipes, especially in the HAZ (heat-affected zone) and weldment areas, to hydrogen sulfide in the geothermal industry is crucial to understand from the early stages, particularly during construction. The combination of tensile stress from residual stresses after welding and metallurgical phase transformation makes the joint areas vulnerable to sulfide stress cracking. This condition becomes even more extreme when the equipment operates during the well stimulation phase. This research assesses the severity of H₂S-induced cracking using NACE MR0175 and ISO 15156-1 standards, focusing on the effects of pH and partial pressure of H₂S (p_{H₂S …}

Development And Validation Of A Computational Fluid Dynamics Model Using Wind Tunnel Experiments, Savanah G. Godwin

Chemical Engineering Undergraduate Honors Theses

A gas release computational fluid dynamics model was developed and validated using a previous wind tunnel experiment conducted by Daniel Williams. This simulation was modeled using CHEM software, and based on experimental conditions used in the University of Arkansas’ Chemical Hazard Research Center’s wind tunnel. These include ultra-low wind speeds, working in the atmospheric boundary layer, and using finite release durations with a neutrally buoyant gas. The simulation was developed in two phases: inflow and release. The inflow phase consisted of the development of the atmospheric boundary layer. The data from the simulation aligned well with the wind tunnel data. …

Development Of Translational Microscale Systems To Interrogate How Biophysical And Biochemical Cues Alter The Phenotype Of Hormone Positive Breast Cancer, Braulio Ortega Quesada

All Dissertations

Cancer is a complicated disease and one in every three diagnoses are women with breast cancer. Recent research shows that the progression of cancer depends strongly on interactions with other non-cancerous cells and non-cellular components. Metastasis, the spread of cancer to other parts of the body, is a key step in cancer progression and makes treatment harder, leading to poor response to treatments culminating in death in ~90% of patients. This dissertation focused on creating a series of microdevices as novel pre-clinical models of breast cancer. Two different devices were fabricated to (1) study how exposing cancer cells to the …

Design And Characterization Of Lignin-Based, Thermoresponsive Soft Composites With Improved Mechanical And Transport Properties, Missoury D. Wolff

All Dissertations

In an attempt to reduce reliance on petroleum-based polymers, lignin – an abundant biopolymer – has gained popularity as a sustainable alternative. However, research on lignin-containing soft composites – i.e., hydrogel (bio)composites – has largely been heuristic, providing limited insight into the fundamental structure-processing-property relationships that govern performance improvements in this emerging class of ‘green’ soft composites. As such, this dissertation presents a systematic investigation of how lignin molecular weight (MW), composite composition, and the concentrations of crosslinker and accelerator impact the mechanical and transport characteristics of soft composites composed of lignin, poly(N-isopropylacrylamide) (PNIPAm), and poly(vinyl alcohol) (PVA).

In the …