Chemical Engineering Commons^™

Energy And Resource-Saving Method For Enriching The Waste Water Purified Without Sufficient Purification With Oxygen, Dilobar Khurramova, Mukhtor Khurramov, Sharifa Ganieva, Zulqaynar Nazirov

CHEMISTRY AND CHEMICAL ENGINEERING

In order to implement a reliable and environmentally safe, economically viable method of wastewater enrichment, the goal is to develop an energy- and resource-saving method of oxygen enrichment of wastewater that has not undergone sufficient treatment. Cleaning is carried out in a tank, which is built using rock, which is an algal limestone. Limestone contributes to the improvement of the oxygen regime due to the “conservation” of organic matter in anoxic bottom layers and the acceleration of the process of photosynthesis of unicellular algae. Calcium carbonate is a reagent that provides not only automatic stabilization of water pH at 2/dm …

Kinetics Of Carboxymethylation Reaction Of Cellulose Samples With Different Degree Of Crystallinity, Ilkhom Goyibnazarov, Sherzod Yuldoshov, Abdushukhur Sarimsokov

CHEMISTRY AND CHEMICAL ENGINEERING

No abstract provided.

Mathematical Modeling Of Synthesis 4´,4´´-Di-(1-Methyl-1-Hydroxy-2-Phenylethynyl)-Dibenzo-18-Crown-6, Lyubov Kozinskaya, Dilorom Mirkhamitova

CHEMISTRY AND CHEMICAL ENGINEERING

The main goal of this study is the mathematical modeling of the optimal conditions for the synthesis of 4´,4´´-di-(1-methyl-1-hydroxy-2-phenylethynyl)-dibenzo-18-crown-6 by the least squares method. In the STAT program, iconograms of mathematical modeling of the synthesis and the dependence of the rate of formation of 4´,4´´-di-(1-methyl-1-hydroxy-2-phenylethynyl)-dibenzo-18-crown-6 on temperature and reaction time were obtained, the corresponding analytical dependencies are determined. Mathematical processing of the results of the synthesis of 4´,4´´-di-(1-methyl-1-hydroxy-2-phenylethynyl)-dibenzo-18-crown-6 was carried out, a system of linear equations was compiled using the matrix method. The average reaction rate and the optimum of the mathematical model were determined, and the experimental and calculated …

Optimization Of A Styrene Prodcution And Separation Process, Bryce Little

Honors Theses

A step wise optimization of Unit 500 was completed. Unit 500 is a planned ethylbenzene to styrene production plant that has a annual production goal of 100,000 metric tons of styrene. The cost of styrene on the market is $1,598. The base case of Unit 500 produced styrene at a cost of $2,650. Optimization was completed with an emphasis on parametric changes though material of construction and heat integration were also considered. The optimized Unit 500 design reduced the cost of styrene production to $2,035 per metric ton. While this represents a significant improvement on the base case cost, it …

Probing Myosin Ensemble Mechanics In Actin Filament Bundles Using Optical Tweezers, Omayma Al Azzam, Janie C. Watts, Justin E. Reynolds, Juliana E. Davis, Dana N. Reinemann

Faculty and Student Publications

Myosins are motor proteins that hydrolyze ATP to step along actin filament (AF) tracks and are essential in cellular processes such as motility and muscle contraction. To understand their force-generating mechanisms, myosin II has been investigated both at the single-molecule (SM) level and as teams of motors in vitro using biophysical methods such as optical trapping. These studies showed that myosin force-generating behavior can differ greatly when moving from the single-molecule level in a three-bead arrangement to groups of motors working together on a rigid bead or coverslip surface in a gliding arrangement. However, these assay constructions do not permit …

Optimization Of A Fluidized Bed Reactor For The Production Of Styrene From Ethylbenzene, Gregory Espenan

Honors Theses

In order to optimize Unit 500, a styrene production plant, the Net Present Value (NPV) was used as the objective function to ensure every optimization strategy had a positive economic effect. To optimize a chemical plant, it is important to note efficiency, economics, product specifications, and production requirements. The goal of this project was to make changes to the base case of Unit 500 to minimize the cost to produce styrene for an upstream unit. PRO/II was used to simulate various points in different unit operations throughout the process. The NPV was measured after each unit operation was simulated to …

A Data-Based Framework For Monitoring And Controlling Particulate Systems, Vidhyadhar Manee

LSU Doctoral Dissertations

One of the limitations of conventional monitoring tools in crystallization is the inability to deal with high solids concentration. Image-based monitoring, in which RGB images of the solution are captured and analyzed by an object detection software, has been a promising alternative. The software used in these tools primarily depends on hand-coded heuristics to distinguish between the signal and the noise. With the recent success of supervised deep learning, a newer paradigm has emerged in which the heuristics can be learnt from labeled images. This approach is founded on the idea that it is easier to develop labels for data …

Reactive Thin Film Polymers And Thin Film Composite Membranes For The Rapid Screening Of Uranium Isotopes, Abenazer W. Darge

All Dissertations

Traditional radiochemistry approaches for the detection of trace-level alpha-emitting radioisotopes in water require lengthy offsite sample preparations and do not lend themselves to rapid quantification. Therefore, a novel platform is needed that combines onsite purification, concentration, and isotopic screening with a fieldable detection system. My dissertation research objective was to develop novel reactive thin polymer films and thin film composite membranes for the selective separation of uranium from environmental water followed by direct isotopic analysis by alpha spectroscopy. Chapter 1 reviews progress made on uranium separation from aqueous matrices and discusses methods used for the determination of isotopic composition.

Chapter …

Sanitary Ware Waste As A Source For A Valuable Biodiesel Catalyst, Mai H. Roushdy

Chemical Engineering

Biofuel is a type of fuel that is made from biomass using modern techniques rather than the relatively slow geological processes that lead to the development of fossil fuels. In Europe, biodiesel is the most widely used biofuel. The sanitary ware industry generates a lot of hazardous waste, such as waste gypsum molds. These molds are broken, pulverized, and reacted with NaCO3 to make CaCO3, which is then heated to produce CaO. The resulting CaO catalyzes the reaction between waste frying oil and methanol for biodiesel synthesis. To evaluate the effect of reaction parameters on the production of biodiesel, the …

Isolation And Production Of Tandem Collagen Binding Domain From Clostridial Collagenase Colg And Developments In C1q Reagent Production For Future Molecule Characterization Work, Stephanie Beitle

Chemical Engineering Undergraduate Honors Theses

This thesis covers a two part project: the production methods to create a double collagen binding domain molecule with a growth factor for wound healing applications and the development of a new in-house production method for isolating C1q from bovine blood. The wound healing molecule was created using transformation, sonication, and purification before being tested via electrophoresis SDS page and Western blots to confirm the molecule’s presence. The C1q in-house production method utilizes an ultrafiltration flow cell rather than dialysis at a critical point in the process, allowing for researchers to not only be able to use a single small …

Fate And Transport Of Toxoplasma Gondii Oocysts In Saturated Porous Media: Effects Of Electrolytes And Natural Organic Matter, Christian Pullano

All Theses

Toxoplasma gondii is a pathogenic microorganism that is currently a threat to public health. Understanding the fate and transport of T. gondii through the soil and groundwater is vital in determining the risk it poses to water resources and human health. The physico-chemical interactions between the groundwater and the bio colloid within an aquifer will dictate its mobility and its ability to infect humans. This research examines how various naturally occurring groundwater chemistries containing organic compounds and monovalent and divalent salt solutions will alter the fate and transport of T. gondii. Solutions containing various concentrations of humic acid, fulvic …

Preparation, Cure, And Characterization Of Cyanate Ester-Epoxy Blends, Donald A. Klosterman

Chemical and Materials Engineering Faculty Publications

Cyanate ester resins are often blended with lower cost epoxy monomers in order to modify the cost, toughness, and processing characteristics. There are also several choices of catalysts that can be used to improve processing, namely by reducing the cure temperature. This study was undertaken to illustrate how a designed experiment approach can be used to systematically investigate a wide range of material combinations and illuminate the basic cure behavior of some simple cyanate ester – epoxy blend combinations. Two commercial cyanate ester resin products were obtained. Each was blended with a bisphenol F based epoxy resin at two different …

Erythrocyte Deformability In Response To Glucose Using Liquid Crystals, Jayden Goff

Biomedical Engineering Undergraduate Honors Theses

The worldwide prevalence of diabetes mellitus is rapidly increasing with about 9.3% of the adult population living with the disease. People with diabetes have trouble regulating their blood glucose levels which typically leads to hyperglycemia. Under normal physiological conditions, erythrocytes can undergo deformations in response to shear stress when passing through capillaries with a smaller diameter. Poorly managed hyperglycemia can lead to the glycosylation of erythrocyte membrane proteins and hemoglobin. This glycosylation leads to increased rigidity of the cells along with decreased deformability in response to mechanical stress; therefore, these cells have a higher susceptibility of getting stuck in the …

Engineering Lewis Acidic Materials For Biomass Conversion And Battery Applications., Md Anwar Hossain

Electronic Theses and Dissertations

My long-term goal is to develop catalytic systems to produce renewable energy for a sustainable society. The overall research objective of my dissertation is to advance understanding of Lewis acidic materials for (1) conversion of renewable lignin into phenolics and (2) enhanced cycling stability of lithium metal batteries to safely store renewable electricity from wind and solar, thereby laying the groundwork for our transition to a sustainable society. Petroleum is a conventional feedstock for current transportation fuels (gasoline, diesel, and jet fuels). However, petroleum is a finite resource and produces greenhouse gases (CO₂ and CH₄) upon processing, …

Structural, Charge Transport, Gas Sensing, Magnetic, Pseudocapacitive, And Electrocatalytic Properties Of Perovskite Oxides., Surendra Bahadur Karki

Electronic Theses and Dissertations

Perovskites are functional materials with the general formula ABO₃ (A = alkali, alkaline earth or lanthanoid cations and B = transition metal or main group cations). These materials are marked by a variety of crystal structures and interesting properties such as colossal magnetoresistance, ferroelectricity, multiferroicity, superconductivity, pseudocapacitance, gas sensing, charge transport, and electrocatalytic properties. The formula of perovskite can be written as AA’BB’O₆, when there is ordering between two cations over A and B-sites. Such compounds are called double perovskite oxides. Some amount of oxygen could be lost from crystal structure without decomposition of the phase. Such …

Analyzing The Surface Chemistry Of Ni-Fe Hydroxide Alloy Nanoparticles As Catalysts For The Oxygen Evolution Reaction By X-Ray Photoelectron Spectroscopy Analysis, Lauren B. Shepard

Chemical Engineering Undergraduate Honors Theses

Water electrolysis has been proposed as a renewable source of hydrogen, a possible replacement to harmful fossil fuels. This process can be broken down into two half reactions, the hydrogen evolution reaction and the oxygen evolution reaction. Because the oxygen evolution reaction has slow kinetics and a high overpotential to overcome, a catalyst is needed to speed up the kinetics and ensure faster and more efficient production of molecular hydrogen. The use of Ni-Fe hydroxide alloy nanoparticles as a catalyst has been shown to significantly improve the efficiency of the reaction by decreasing the overpotential, making the process more energy …

Ultrafiltration Membranes Functionalized With Copper Oxide And Zwitterions For Fouling Resistance, Cannon Hackett, Mojtaba Abolhassani, Lauren Greenlee, Audie K. Thompson

Chemical Engineering Faculty Publications and Presentations

Polymeric membrane fouling is a long-standing challenge for water filtration. Metal/metal oxide nanoparticle functionalization of the membrane surface can impart anti-fouling properties through the reactivity of the metal species and the generation of radical species. Copper oxide nanoparticles (CuO NPs) are effective at reducing organic fouling when used in conjunction with hydrogen peroxide, but leaching of copper ions from the membrane has been observed, which can hinder the longevity of the CuO NP activity at the membrane surface. Zwitterions can reduce organic fouling and stabilize NP attachment, suggesting a potential opportunity to combine the two functionalizations. Here, we coated polyethersulfone …

Hydration Of High-Alumina Calcium Aluminate Cements With Carbonate And Sulfate Additives, Jonathan Lapeyre, Sai Akshay Ponduru, Monday Uchenna Okoronkwo, Hongyan Ma, Aditya Kumar

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study investigated the influence of limestone (LS) and calcium sulfate (C$) mineral additives on the hydration kinetics of high-α-Al₂O₃ calcium aluminate cement (CAC) utilizing experimental techniques and thermodynamic simulations. Increasing the replacement level of limestone or calcium sulfate increased the cumulative heat of the hydration reaction. The limestone exhibited limited acceleratory effects to the CAC hydration kinetics due to the coarseness of the powder. The coarse particle size distribution limited any heterogenous nucleation that would have occurred with a finer particle size as well as the intrinsic insolubility kinetically limits the formation of monocarboaluminate phases. Conversely, …

Development Of Upconverting Films Containing Singlet Sink, Blake Mckay

Honors Theses

Upconversion is the conversion of light from a longer wavelength to a shorter wavelength. This technique has a wide range of applications in solar technology, bioimaging, drug delivery, and many other fields.¹ In this study, a three-part upconverting system was developed including a component termed singlet sink in order to increase upconversion efficiency. The components of this system included Palladium (II) Octaethylporphrin (PdOEP), pyrenebutanol, and 9-phenyl-10-(p-tolylethynyl)-anthracene (PTEA). A procedure was developed in order to create and process films containing these three materials dispersed in a poly(methyl methacrylate) (PMMA) matrix. Upconversion was analyzed in both solution and the …

Lithospheric Structure Underneath The Archean Tanzania Craton And Adjacent Regions From A Joint Inversion Of Receiver Functions And Rayleigh-Wave Phase Velocity Dispersion, Tuo Wang, Stephen S. Gao, Qiuyue Yang, Ling Chen, Kelly H. Liu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Lithospheric structure beneath the Archean Tanzania craton and adjacent regions, including segments of the East African rift system (EARS) and the Proterozoic-early Paleozoic orogenic belts between the EARS and the craton, is imaged by a joint inversion of receiver functions and Rayleigh wave dispersion measurements derived from ambient seismic noise for shorter periods and teleseismic data for longer periods. Our resulting crustal thickness, crustal VP= VS measurements and 3D shear-wave velocity model for the upper 120 km show a clear spatial correspondence with major surficial geological features. The new results suggest the presence of a mafic layer in the bottom …

Study Of Gas Holdup Distribution In Cylindrical Split Airlift Reactor By Using Gamma-Ray Densitometry (Grd), Abbas J. Sultan, Laith S. Sabri, Hasan Shakir Majdi, Shadha K. Jebur, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

The local gas holdup details and behaviors in the cylindrical split airlift column by using an unconventional gamma-ray densitometry (GRD) measurement in non-invasive manner technique was investigated for the first time in this work for such kind of airlift column. With different gas velocities, 1, 2, and 3 cm/s, at three various axial planes (different levels) in z = 3, 60, and 110 cm were studied for local distribution in radial gas holdup profiles. The distribution in gas–liquid phases (air-water system) in the entire split reactor column, in the rising and descending sides, including their behavior in the upper and …

Recovery Of Degraded Ni-Rich Nmc811 Particles For Lithium-Ion Batteries, Han Yu, Yan Gao, James Kirtley, Gabriel Borgmeyer, Xiaoqing He, Xinhua Liang

Chemical and Biochemical Engineering Faculty Research & Creative Works

Nickel-rich cathode materials attract a lot of attention due to their high energy density. However, their sensitivity to air and moisture hinders their practical applications. Exposing Ni-rich NMC in the air will produce by-products that are not conducive to lithium-ion transmission. Water washing can be used to remove by-products on the surface, but it can also introduce new problems, such as the generation of NiO on the particle surface, which will reduce the electrochemical performance of the material. In this study, Al₂O₃atomic layer deposition (ALD) was applied on degraded NMC811 particles to recover the electrochemical performance …

Process Evaluation And Kinetic Analysis Of 3d-Printed Monoliths Comprised Of Cao And Cr/H-Zsm-5 In Combined Co2 Capture-C2h6 Oxidative Dehydrogenation To C2h4, Khaled Baamran, Shane Lawson, Ali A. Rownaghi, Fateme Rezaei

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this study, dual-function materials (DFMs) comprised of CaO and Cr/H-ZSM-5 were formulated in 3D-printed monolithic structures and investigated in a combined process for capture and utilization of CO₂ in oxidative dehydrogenation of C₂H₆ to C₂H₄ (CO₂-ODHE). Various formulation strategies were employed to fabricate these DFM structures. Two bed designs were considered: i) a layered-bed in which adsorbent (CaO) and catalyst were printed separately and stacked on top of each other, and ii) a single-layer bed where the adsorbent-catalyst materials were 3D-printed into a singular monolith and loaded into the bed …

Random Trilobe Packing Using Rigid Body Approach And Local Gas-Liquid Hydrodynamics Simulation Through Cfd With Experimental Validation, Binbin Qi, Sebastián Uribe, Omar Farid, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

It is quite difficult to measure the local information of the gas/liquid flow inside random packed extrudate catalyst beds in a large scale. Obtaining the local information through computational fluid dynamic (CFD) simulations in such system is also difficult due to the complexity of random particle packing and two-phase flow simulation. An efficient packing scheme was implemented to randomly pack 2917 trilobe particles (10 cm in height) in a 2-inch column to represent the trickle bed reactor (TBR) based on the rigid body approach. The generated geometry was used to define the computational domain for the two-phase hydrodynamics simulation based …

Liquid And Solids Phase Backmixing In A Bubble And Slurry Bubble Column Using A Virtual Tracer Response Methodology Based On The Trajectory Data Of The Radioactive Particle Tracking (Rpt) Technique, Lu Han, Premkumar Kamalanathan, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Virtual tracer response methodology developed based on the trajectory data of the computer aided radioactive particle tracking (CARPT) technique was demonstrated. The demonstrated virtual tracer technique has advantages of non-invasiveness, near perfect injection/sampling, and flexibility in choosing the sampling/injection boundaries in a specific spatial pattern. With the developed virtual tracer technique, liquid and solids back mixing was investigated at the conditions mimicking Fischer-Tropsch synthesis. Experiments were conducted at different pressure, solids loading, and superficial gas velocity. The axial dispersion model (ADM) and recirculation and cross flow dispersion (RCFD) models were used to model the liquid mixing. Transient sedimentation dispersion model …

Review Of Biomechanical Studies And Finite Element Modeling Of Sternal Closure Using Bio-Active Adhesives, Amatulraheem Al-Abassi, Marcello Papini, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

The most common complication of median sternotomy surgery is sternum re-separation after sternal fixation, which leads to high rates of morbidity and mortality. The adhered sternal fixation technique comprises the wiring fixation technique and the use of bio-adhesives. Adhered sternal fixation techniques have not been extensively studied using finite element analysis, so mechanical testing studies and finite element analysis of sternal fixation will be presented in this review to find the optimum techniques for simulating sternal fixation with adhesives. The optimal wiring technique should enhance bone stability and limit sternal displacement. Bio-adhesives have been proposed to support sternal fixation, as …

A New Look At Landslides Of The Vermilion And Echo Cliffs, Northern Arizona, Conor M. Watkins, J. David Rogers

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The Vermilion and Echo Cliffs form a nearly continuous escarpment more than 160 km long within the Colorado Plateau physiographic province of North America. The cliffs overlie the Marble Platform in northern Arizona and are located along the Colorado River, just upstream of the Grand Canyon. Large rotational block landslides mantle the erosional escarpment along most of its extent. Although these landslides have been noted for over 100 years, their likely origin has never been explained. Landslide failure surfaces appear to be influenced by the Petrified Forest Member of the Triassic Chinle Formation, a shale layer containing smectite clay weathered …

Effects Of Continuous In Situ Low-Dose Ionizing Radiation On Microorganisms, Molly E. Wintenberg

All Dissertations

Precise detection and monitoring of nuclear fuel cycle, enrichment, and weapon development activities are critical for supporting warfighter preparation in chemical, biological, radiological, nuclear, and explosives (CBRNE) operations, clandestine activities, and nuclear compliance. A biological sensing system could serve as an alternative to traditional detection methods by using organic material naturally present in the environment to discreetly detect residual trace nuclear material. Microorganisms provide an optimal platform for an alternative sensing system; however, their response to low levels of ionizing radiation is poorly characterized. Combining the power of next-generation sequencing and transcriptomic analysis, this dissertation takes an approach to obtain …

Drug-Facilitated Sexual Assault At The University Of Arkansas, Barrett Weidman

Chemical Engineering Undergraduate Honors Theses

This work was written to fulfill two main purposes. First, to help survivors of Drug-Facilitated Sexual Assault (DFSA) process their experience by compiling the toxicological, pharmacological, and distribution of the three most used date-rape drugs. Second, to gauge the knowledge and interest of University of Arkansas students regarding drug impairments, sexual assault education, and bystander intervention training. A survey was conducted for the latter and revealed that 91.6% of students believe the University’s existing sexual assault prevention education and bystander intervention training have room for improvement. Also, 37.1% of students who have received this education report that the programming does …

Free Convection Heat Transfer From Plates, Alexa Moreno

Chemical Engineering Undergraduate Honors Theses

The purpose of this honors thesis is to create an experiment for the CHEG Lab I course. This report explains the motivation for creating this heat convection experiment, the results of performing the experiment, and provides recommendations for future work on this experiment. Multiple experiments were performed to assess materials and parameters to be investigated. It was determined that a 0.5” plate has smaller percent error and accommodates for the desired timeframe for a Lab I experiment compared to the first plate used (1.5” thickness). Recommendations for expanding on this project include adding experiments using vertical geometry for heat convection …