Open Access. Powered by Scholars. Published by Universities.®

Chemical Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2022

Discipline
Institution
Keyword
Publication
Publication Type

Articles 241 - 270 of 657

Full-Text Articles in Chemical Engineering

Actuator Cyberattack Handling Using Lyapunov-Based Economic Model Predictive Control, Keshav Kasturi Rangan, Henrique Oyama, Helen Durand Jun 2022

Actuator Cyberattack Handling Using Lyapunov-Based Economic Model Predictive Control, Keshav Kasturi Rangan, Henrique Oyama, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Cybersecurity has gained increasing interest as a consequence of the potential impacts of cyberattacks on profits and safety. While attacks can affect various components of a plant, prior work from our group has focused on the impact of cyberattacks on control components such as process sensors and actuators and the development of detection strategies for cybersecurity derived from control theory. In this work, we provide greater focus on actuator attacks; specifically, we extend a detection and control strategy previously applied for sensor attacks and based on an optimization-based control technique called Lyapunov-based economic model predictive control (LEMPC) to detect attacks …

Go to article

Test Methods For Image-Based Information In Next-Generation Manufacturing, Henrique Oyama, Dominic Messina, Renee O'Neill, Samantha Cherney, Minhazur Rahman, Keshav Kasturi Rangan, Govanni Gjonaj, Helen Durand Jun 2022

Test Methods For Image-Based Information In Next-Generation Manufacturing, Henrique Oyama, Dominic Messina, Renee O'Neill, Samantha Cherney, Minhazur Rahman, Keshav Kasturi Rangan, Govanni Gjonaj, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Typical control designs in the process systems engineering literature have assumed that the primary sensing methodologies are traditional instruments such as thermocouples. Dig- italization is changing the landscape for manufacturing, and data-based sensing modalities (e.g., image-based sensing) are becoming of greater interest for plant control. These considerations require novel test/evaluation solutions. For example, process systems engineering researchers may wish to test image-based sensors in simulation. In this work, we provide preliminary thoughts on how image-based technologies might be evaluated via simulation for process systems.

Go to article

Quantum Computing And Resilient Design Perspectives For Cybersecurity Of Feedback Systems, Keshav Kasturi Rangan, Jihan Abou Halloun, Henrique Oyama, Samantha Cherney, Ilham Azali Assoumani, Nazir Jairazbhoy, Helen Durand, Simon Ka Ng Jun 2022

Quantum Computing And Resilient Design Perspectives For Cybersecurity Of Feedback Systems, Keshav Kasturi Rangan, Jihan Abou Halloun, Henrique Oyama, Samantha Cherney, Ilham Azali Assoumani, Nazir Jairazbhoy, Helen Durand, Simon Ka Ng

Chemical Engineering and Materials Science Faculty Research Publications

Cybersecurity of control systems is an important issue in next-generation manufac- turing that can impact both operational objectives (safety and performance) as well as process designs (via hazard analysis). Cyberattacks differ from faults in that they can be coordinated efforts to exploit system vulnerabilities to create otherwise unlikely hazard scenarios. Because coordination and targeted process manipulation can be characteristics of attacks, some of the tactics previously analyzed in our group from a control system cybersecurity perspective have incorporated randomness to attempt to thwart attacks. The underlying assumption for the generation of this randomness has been that it can be achieved …

Go to article

Challenges And Opportunities For Next-Generation Manufacturing In Space, Kip Nieman, A. F. Leonard, Katie Tyrell, Dominic Messina, Rebecca Lopez, Helen Durand Jun 2022

Challenges And Opportunities For Next-Generation Manufacturing In Space, Kip Nieman, A. F. Leonard, Katie Tyrell, Dominic Messina, Rebecca Lopez, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

With commercial space travel now a reality, the idea that people might spend time on other planets in the future seems to have greater potential. To make this possible, however, there needs to be flexible means for manufacturing in space to enable tooling or resources to be created when needed to handle unexpected situations. Next-generation manufacturing paradigms offer significant potential for the kind of flexibility that might be needed; however, they can result in increases in computation time compared to traditional control methods that could make many of the computing resources already available on earth attractive for use. Furthermore, resilience …

Go to article

Exploring The Metabolic Landscape Of Pancreatic Ductal Adenocarcinoma Cells Using Genome-Scale Metabolic Modeling, Mohammad Mazharul Islam, Andrea Goertzen, Pankaj K. Singh, Rajib Saha Jun 2022

Exploring The Metabolic Landscape Of Pancreatic Ductal Adenocarcinoma Cells Using Genome-Scale Metabolic Modeling, Mohammad Mazharul Islam, Andrea Goertzen, Pankaj K. Singh, Rajib Saha

Department of Chemical and Biomolecular Engineering: Faculty Publications

Pancreatic ductal adenocarcinoma (PDAC) is a major research focus because of its poor therapy response and dismal prognosis. PDAC cells adapt their metabolism to the surrounding environment, often relying on diverse nutrient sources. Because traditional experimental techniques appear exhaustive to find a viable therapeutic strategy, a highly curated and omics-informed PDAC genome-scale metabolic model was reconstructed using patient-specific transcriptomics data. From the model-predictions, several new metabolic functions were explored as potential therapeutic targets in addition to the known metabolic hallmarks of PDAC. Significant downregulation in the peroxisomal beta oxidation pathway, flux modulation in the carnitine shuttle system, and upregulation in …

Go to article

Complex Rupture And Triggered Aseismic Creep During The 14 August 2021 Haiti Earthquake From Satellite Geodesy, Jeremy Maurer, R. Dutta, A. Vernon, S. Vajedian Jun 2022

Complex Rupture And Triggered Aseismic Creep During The 14 August 2021 Haiti Earthquake From Satellite Geodesy, Jeremy Maurer, R. Dutta, A. Vernon, S. Vajedian

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The 2021 August 14 MW 7.2 Nippes, Haiti earthquake occurred 75 km west of the epicenter of the 2010 Leogane earthquake (Haiti) on the transpressive Caribbean - North America plate boundary. We present an updated fault map for Hispaniola and model coseismic and early postseismic fault slip using Interferometric Synthetic Aperture Radar and pixel offsets. We find the earthquake ruptured multiple segments of the Enriquillo-Plantain Garden Fault Zone. Slip occurred in two main sub-events on either side of a restraining bend at Pic Macaya, with ∼2.7 m of peak reverse-slip east of the bend. To the west, slip jumps the …

Go to article

Machine Learning Prediction Of Glass Transition Temperature Of Conjugated Polymers From Chemical Structure, Amirhadi Alesadi, Zhiqiang Cao, Zhaofan Li, Song Zhang, Haoyu Zhao, Xiaodan Gu, Wenjie Xia Jun 2022

Machine Learning Prediction Of Glass Transition Temperature Of Conjugated Polymers From Chemical Structure, Amirhadi Alesadi, Zhiqiang Cao, Zhaofan Li, Song Zhang, Haoyu Zhao, Xiaodan Gu, Wenjie Xia

Faculty Publications

Predicting the glass transition temperature (Tg) is of critical importance as it governs the thermomechanical performance of conjugated polymers (CPs). Here, we report a predictive modeling framework to predict Tg of CPs through the integration of machine learning (ML), molecular dynamics (MD) simulations, and experiments. With 154 Tg data collected, an ML model is developed by taking simplified “geometry” of six chemical building blocks as molecular features, where side-chain fraction, isolated rings, fused rings, and bridged rings features are identified as the dominant ones for Tg. MD simulations further unravel the fundamental roles …

Go to article

Physics-Based Proxy Modeling Of Co2 Sequestration In Deep Saline Aquifers, Aaditya Khanal, Md Fahim Shahriar Jun 2022

Physics-Based Proxy Modeling Of Co2 Sequestration In Deep Saline Aquifers, Aaditya Khanal, Md Fahim Shahriar

Jasper Department of Chemical Engineering Faculty Publications and Presentations

The geological sequestration of CO2 in deep saline aquifers is one of the most effective strategies to reduce greenhouse emissions from the stationary point sources of CO2. However, it is a complex task to quantify the storage capacity of an aquifer as it is a function of various geological characteristics and operational decisions. This study applies physics-based proxy modeling by using multiple machine learning (ML) models to predict the CO2 trapping scenarios in a deep saline aquifer. A compositional reservoir simulator was used to develop a base case proxy model to simulate the CO2 trapping mechanisms (i.e., residual, solubility, and …

Go to article

On-Line Process Physics Tests Via Lyapunov-Based Economic Model Predictive Control And Simulation-Based Testing Of Image-Based Process Control, Henrique Oyama, A. F. Leonard, Minhazur Rahman, Govanni Gjonaj, Michael Williamson, Helen Durand Jun 2022

On-Line Process Physics Tests Via Lyapunov-Based Economic Model Predictive Control And Simulation-Based Testing Of Image-Based Process Control, Henrique Oyama, A. F. Leonard, Minhazur Rahman, Govanni Gjonaj, Michael Williamson, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Next-generation manufacturing involves increasing use of automation and data to enhance process efficiency. An important question for the chemical process industries, as new process systems (e.g., intensified processes) and new data modalities (e.g., images) are integrated with traditional plant automation concepts, will be how to best evaluate alternative strategies for data-driven modeling and synthesizing process data. Two methods which could be used to aid in this are those which aid in testing data-based techniques on-line, and those which enable various data-based techniques to be assessed in simulation. In this work, we discuss two techniques in this domain which can be …

Go to article

Augmented Formic Acid Electro-Oxidation At A Co-Electrodeposited Pd/Au Nanoparticle Catalyst, Yaser M. Asal, Ahmad M. Mohammad, Sayed S. Abd El Rehim, Islam M. Al-Akraa Jun 2022

Augmented Formic Acid Electro-Oxidation At A Co-Electrodeposited Pd/Au Nanoparticle Catalyst, Yaser M. Asal, Ahmad M. Mohammad, Sayed S. Abd El Rehim, Islam M. Al-Akraa

Chemical Engineering

In this study, the formic acid electro-oxidation reaction (FAEOR) was catalyzed on a Pd-Au co-electrodeposited binary catalyst. The kinetics of FAEOR were intensively impacted by changing the Pd2+:Au3+ molar ratio in the deposition medium. The Pd1-Au1 catalyst (for which the Pd2+:Au3+ molar ratio was 1:1) acquired the highest activity with a peak current density for the direct FAEOR (Ip) of 4.14 mA cm−2 (ca. 13- times higher than that (ca. 0.33 mA cm−2) of the pristine Pd1-Au0 catalyst). It also retained the highest stability that was denoted in fulfilling ca. 0.292 mA cm−2 (ca. 19-times higher than 0.015 …

Go to article

Pattern Recognition For Steam Flooding Field Applications Based On Hierarchical Clustering And Principal Component Analysis, Na Zhang, Mingzhen Wei, Baojun Bai, Xiaopeng Wang, Jian Hao, Shun Jia Jun 2022

Pattern Recognition For Steam Flooding Field Applications Based On Hierarchical Clustering And Principal Component Analysis, Na Zhang, Mingzhen Wei, Baojun Bai, Xiaopeng Wang, Jian Hao, Shun Jia

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Steam flooding is a complex process that has been considered as an effective enhanced oil recovery technique in both heavy oil and light oil reservoirs. Many studies have been conducted on different sets of steam flooding projects using the conventional data analysis methods, while the implementation of machine learning algorithms to find the hidden patterns is rarely found. In this study, a hierarchical clustering algorithm (HCA) coupled with principal component analysis is used to analyze the steam flooding projects worldwide. The goal of this research is to group similar steam flooding projects into the same cluster so that valuable operational …

Go to article

Pattern Recognition For Steam Flooding Field Applications Based On Hierarchical Clustering And Principal Component Analysis, Na Zhang, Mingzhen Wei, Baojun Bai, Xiaopeng Wang, Jian Hao, Shun Jia Jun 2022

Pattern Recognition For Steam Flooding Field Applications Based On Hierarchical Clustering And Principal Component Analysis, Na Zhang, Mingzhen Wei, Baojun Bai, Xiaopeng Wang, Jian Hao, Shun Jia

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Steam flooding is a complex process that has been considered as an effective enhanced oil recovery technique in both heavy oil and light oil reservoirs. Many studies have been conducted on different sets of steam flooding projects using the conventional data analysis methods, while the implementation of machine learning algorithms to find the hidden patterns is rarely found. In this study, a hierarchical clustering algorithm (HCA) coupled with principal component analysis is used to analyze the steam flooding projects worldwide. The goal of this research is to group similar steam flooding projects into the same cluster so that valuable operational …

Go to article

Commemorative Issue In Honor Of Professor Gerhard Ertl On The Occasion Of His 85th Birthday, Stanislaw Waclawek, Andrzej Kudelski, Jochen A. Lauterbach, Dionysios D. Dionysiou Jun 2022

Commemorative Issue In Honor Of Professor Gerhard Ertl On The Occasion Of His 85th Birthday, Stanislaw Waclawek, Andrzej Kudelski, Jochen A. Lauterbach, Dionysios D. Dionysiou

Faculty Publications

This Special Issue (SI) is dedicated to Professor Gerhard Ertl on his eighty-fifth birthday. Professor Ertl is a Professor Emeritus at the Fritz-Haber-Institut der Max-Planck-Gesellschaft (Berlin, Germany). He won the Nobel Prize in Chemistry in 2007 for his work on the fundamental understanding of heterogeneously catalyzed reactions. According to the Royal Swedish Academy of Sciences, Professor Ertl’s research laid the groundwork for the current understanding of the chemistry of surfaces that has helped, for example, in understanding how ammonia is synthesized and how fuel cells generate energy. This SI includes articles focused on materials with potential applications as cathodes for …

Go to article

Computational Methods To Simulate Molten Salt Thermophysical Properties, Talmage Porter, Michael M. Vaka, Parker Steenblik, Dennis Della Corte Jun 2022

Computational Methods To Simulate Molten Salt Thermophysical Properties, Talmage Porter, Michael M. Vaka, Parker Steenblik, Dennis Della Corte

Faculty Publications

Molten salts are important thermal conductors used in molten salt reactors and solar applications. To use molten salts safely, accurate knowledge of their thermophysical properties is necessary. However, it is experimentally challenging to measure these properties and a comprehensive evaluation of the full chemical space is unfeasible. Computational methods provide an alternative route to access these properties. Here, we summarize the developments in methods over the last 70 years and cluster them into three relevant eras. We review the main advances and limitations of each era and conclude with an optimistic perspective for the next decade, which will likely be …

Go to article

On-Line Process Physics Tests Via Lyapunov-Based Economic Model Predictive Control And Simulation-Based Testing Of Image-Based Process Control, Henrique Oyama, Akkarakaran Francis Leonard, Minhazur Rahman, Govanni Gjonaj, Michael Williamson, Helen Durand Jun 2022

On-Line Process Physics Tests Via Lyapunov-Based Economic Model Predictive Control And Simulation-Based Testing Of Image-Based Process Control, Henrique Oyama, Akkarakaran Francis Leonard, Minhazur Rahman, Govanni Gjonaj, Michael Williamson, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Next-generation manufacturing involves increas- ing use of automation and data to enhance process efficiency. An important question for the chemical process industries, as new process systems (e.g., intensified processes) and new data modalities (e.g., images) are integrated with traditional plant automation concepts, will be how to best evaluate alternative strategies for data-driven modeling and synthesizing process data. Two methods which could be used to aid in this are those which aid in testing data-based techniques on-line, and those which enable various data-based techniques to be assessed in simulation. In this work, we discuss two techniques in this domain which can …

Go to article

Quantum Computing And Resilient Design Perspectives For Cybersecurity Of Feedback Systems, Keshav Kasturi Rangan, Jihan Abou Halloun, Henrique Oyama, Samantha Cherney, Ilham Azali Assoumani, Nazir Jairazbhoy, Helen Durand, Simon Ka Ng Jun 2022

Quantum Computing And Resilient Design Perspectives For Cybersecurity Of Feedback Systems, Keshav Kasturi Rangan, Jihan Abou Halloun, Henrique Oyama, Samantha Cherney, Ilham Azali Assoumani, Nazir Jairazbhoy, Helen Durand, Simon Ka Ng

Chemical Engineering and Materials Science Faculty Research Publications

Cybersecurity of control systems is an important issue in next-generation manufac- turing that can impact both operational objectives (safety and performance) as well as process designs (via hazard analysis). Cyberattacks differ from faults in that they can be coordinated efforts to exploit system vulnerabilities to create otherwise unlikely hazard scenarios. Because coordination and targeted process manipulation can be characteristics of attacks, some of the tactics previously analyzed in our group from a control system cybersecurity perspective have incorporated randomness to attempt to thwart attacks. The underlying assumption for the generation of this randomness has been that it can be achieved …

Go to article

Comprehensive Review Of Polymer And Polymer Gel Treatments For Natural Gas-Related Conformance Control, Ali Al Brahim, Baojun Bai, Thomas P. Schuman Jun 2022

Comprehensive Review Of Polymer And Polymer Gel Treatments For Natural Gas-Related Conformance Control, Ali Al Brahim, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Conformance problems often exist in natural gas-related activities, resulting in excessive water production from natural gas production wells and/or excessive natural gas production from oil production wells. Several mechanical and chemical solutions were reported in the literature to mitigate the conformance problems. Among the chemical solutions, two classes of materials, namely polymer gels and water-soluble polymers, have been mostly reported. These systems have been mainly reviewed in several studies for their applications as water shutoff treatments for oil production wells. Natural gas production wells exhibit different characteristics and have different properties which could impact the performance of the chemical solutions. …

Go to article

Stagnation And Tearing Of The Subducting Northwest Pacific Slab, Muchen Sun, Youqiang Yu, Stephen S. Gao, Kelly H. Liu Jun 2022

Stagnation And Tearing Of The Subducting Northwest Pacific Slab, Muchen Sun, Youqiang Yu, Stephen S. Gao, Kelly H. Liu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Despite numerous observational and geodynamic modeling studies, the presence of the northwest Pacific slab tear and its influence on mantle dynamics remain controversial. By imaging the mantle transition zone (MTZ) discontinuities beneath the Japan Sea and adjacent areas, we demonstrate an ESE-WNW elongated zone with significant MTZ thinning extending from central Honshu, Japan, to the Korean Peninsula, which provides additional supporting evidence for the existence and distribution of a large-scale slab tear. Our results, when combined with other geophysical and geochemical evidence, indicate that the hot mantle material oceanward of the slab may flow through the slab tear and contribute …

Go to article

Effect Of Arginine And Nano-Hydroxyapatite Application On The Hypersensitivity And Color Change Of Bleached Enamel: A Randomized Controlled Clinical Trial, Lamiaa M. Moharam, Sherif Khadr, Ahmed Abdou, Shaymaa M. Nagi Jun 2022

Effect Of Arginine And Nano-Hydroxyapatite Application On The Hypersensitivity And Color Change Of Bleached Enamel: A Randomized Controlled Clinical Trial, Lamiaa M. Moharam, Sherif Khadr, Ahmed Abdou, Shaymaa M. Nagi

Chemical and Biochemical Engineering Faculty Research & Creative Works

Background: To evaluate the effect of 2.5% Arginine and nano-hydroxyapatite (nHA) application on the post-bleaching hypersensitivity (HS) and color change in a randomized controlled trial. Material and Methods: Sixty-four participants were randomly allocated to four groups (n=16) according to the investigated desensitizing agents (UltraEZ gel, experimental 2.5% Arginine, 2.5% nHA pastes and control (no treatment) groups). An in-office chemical bleaching agent (40% hydrogen peroxide) was used for vital bleaching of the anterior teeth. The desensitizing agents were applied to the assigned groups and left for 30 min then rinsed off the teeth. HS was evaluated using Visual Analogue Scale (VAS) …

Go to article

Porcine Liver Injury Model To Assess Tantalum-Containing Bioactive Glass Powders For Hemostasis, Malvika Nagrath, Danielle Bince, Corwyn Rowsell, Deanna Polintan, Joao Rezende-Neto, Mark R. Towler Jun 2022

Porcine Liver Injury Model To Assess Tantalum-Containing Bioactive Glass Powders For Hemostasis, Malvika Nagrath, Danielle Bince, Corwyn Rowsell, Deanna Polintan, Joao Rezende-Neto, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study evaluates compositions of tantalum-containing mesoporous bioactive glass (Ta-MBG) powders using a porcine fatal liver injury model. The powders based on (80-x)SiO2-15CaO-5P2O5-xTa2O5 compositions with x = 0 (0Ta/Ta-free), 1 (1Ta), and 5 (5Ta) mol% were made using a sol–gel process. A class IV hemorrhage condition was simulated on the animals; hemodynamic data and biochemical analysis confirmed the life-threatening condition. Ta-MBGs were able to stop the bleeding within 10 min of their application while the bleeds in the absence of any intervention or in the presence of a commercial agent, AristaTM …

Go to article

A Novel Numerical Model Of Gelant Inaccessible Pore Volume For In Situ Gel Treatment, Jianqiao Leng, Xindi Sun, Mingzhen Wei, Baojun Bai Jun 2022

A Novel Numerical Model Of Gelant Inaccessible Pore Volume For In Situ Gel Treatment, Jianqiao Leng, Xindi Sun, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Inaccessible pore volume (IAPV) can have an important impact on the placement of gelant during in situ gel treatment for conformance control. Previously, IAPV was considered to be a constant factor in simulators, yet it lacked dynamic characterization. This paper proposes a numerical simulation model of IAPV. The model was derived based on the theoretical hydrodynamic model of gelant molecules. The model considers both static features, such as gelant and formation properties, and dynamic features, such as gelant rheology and retention. To validate our model, we collected IAPV from 64 experiments and the results showed that our model fit moderately …

Go to article

Comprehensive Review Of Polymer And Polymer Gel Treatments For Natural Gas-Related Conformance Control, Ali Al Brahim, Baojun Bai, Thomas P. Schuman Jun 2022

Comprehensive Review Of Polymer And Polymer Gel Treatments For Natural Gas-Related Conformance Control, Ali Al Brahim, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Conformance problems often exist in natural gas-related activities, resulting in excessive water production from natural gas production wells and/or excessive natural gas production from oil production wells. Several mechanical and chemical solutions were reported in the literature to mitigate the conformance problems. Among the chemical solutions, two classes of materials, namely polymer gels and water-soluble polymers, have been mostly reported. These systems have been mainly reviewed in several studies for their applications as water shutoff treatments for oil production wells. Natural gas production wells exhibit different characteristics and have different properties which could impact the performance of the chemical solutions. …

Go to article

Development And Application Of A 1d Compaction Model To Understand 65 Years Of Subsidence In The San Joaquin Valley, Matthew Lees, Rosemary Knight, Ryan G. Smith Jun 2022

Development And Application Of A 1d Compaction Model To Understand 65 Years Of Subsidence In The San Joaquin Valley, Matthew Lees, Rosemary Knight, Ryan G. Smith

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

High rates of land subsidence, caused by groundwater overdraft, are resulting in millions of dollars of infrastructure damage in California's San Joaquin Valley (SJV). In recent years, the use of interferometric synthetic aperture radar (InSAR) has enabled us to substantially improve our understanding of this subsidence. However, only very occasionally have the InSAR data been integrated with a physical model of subsurface compaction. Here, we have used InSAR and other data to parameterize and calibrate a 1D compaction model. We applied our model to a study area in the SJV where we had access to the necessary information on hydraulic …

Go to article

Regularized Ridge Regression Models To Estimate Static Elastic Moduli From Wireline Measurements: Case Study From Southern Iraq, Husam H. Alkinani, Abo Taleb T. Al-Hameedi, Shari Dunn-Norman, Munir Aldin, Deepak Gokaraju, Andreina Guedez, Atheer M. Alattar Jun 2022

Regularized Ridge Regression Models To Estimate Static Elastic Moduli From Wireline Measurements: Case Study From Southern Iraq, Husam H. Alkinani, Abo Taleb T. Al-Hameedi, Shari Dunn-Norman, Munir Aldin, Deepak Gokaraju, Andreina Guedez, Atheer M. Alattar

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Elastic moduli such as Young's modulus (E), Poisson's ratio (v), and bulk modulus (K) are vital to creating geomechanical models for wellbore stability, hydraulic fracturing, sand production, etc. Due to the difficulty of obtaining core samples and performing rock testing, alternatively, wireline measurements can be used to estimate dynamic moduli. However, dynamic moduli are significantly different from elastic moduli due to many factors. In this paper, correlations for three zones (Nahr Umr shale, Zubair shale, and Zubair sandstone) located in southern Iraq were created to estimate static E, K, and ν from dynamic data. Core plugs from the aforementioned three …

Go to article

Effects Of Wettability, Lithology, And Permeability On The Optimum Slug Size Of Low Salinity Water Flooding In Carbonates: An Experimental Approach, Hala Khaled Hasan Alshadafan Jun 2022

Effects Of Wettability, Lithology, And Permeability On The Optimum Slug Size Of Low Salinity Water Flooding In Carbonates: An Experimental Approach, Hala Khaled Hasan Alshadafan

Theses

Low salinity water flooding has attracted academic and industry communities due to its relatively simple and applicable technology. One of the drawbacks of applying the IOR/EOR technique is the lack of the availability of low salinity water in large quantities at the reasonable cost required for a technically and environmentally successful project. To overcome this problem, the industry proposed to use produced water/sea water after dilution, and reverse osmosis filter technology to achieve the required salinity. Both techniques are quite costly and might hinder the project's economic success. Low salinity water as slug size followed by high salinity water was …

Go to article

Fabrication And Characterization Of Graphene Oxide-Based High-Density Polyethylene / Polypropylene Nanocomposites For Biomedical Applications, Albaina Ali Aldhaheri Jun 2022

Fabrication And Characterization Of Graphene Oxide-Based High-Density Polyethylene / Polypropylene Nanocomposites For Biomedical Applications, Albaina Ali Aldhaheri

Theses

Polymeric nanocomposites have recently become one of the most essential sought-after materials for biomedical applications. Among many others, High-Density Polyethylene (HDPE) is being widely used as a bearing material for the artificial hip and knee joints. However, the weak surface properties of HDPE limit the total artificial hip joints’ survival chances. The addition of polypropylene (PP) improves the surface properties of HDPE composites along with their thermal, chemical, and mechanical properties which are crucial in biomedical applications. Moreover, PP can be easily blended with polyethylene (PE) as it has an almost similar chemical resistance to PE. However, PP is more …

Go to article

Functional Carbon Nitride Materials In Photo-Fenton-Like Catalysis For Environmental Remediation, Jingkai Lin, Wenjie Tian, Zheyu Guan, Huayang Zhang, Xiaoguang Duan, Hao Wang, Hongqi Sun, Yanfen Fang, Yingping Huang, Shaobin Wang Jun 2022

Functional Carbon Nitride Materials In Photo-Fenton-Like Catalysis For Environmental Remediation, Jingkai Lin, Wenjie Tian, Zheyu Guan, Huayang Zhang, Xiaoguang Duan, Hao Wang, Hongqi Sun, Yanfen Fang, Yingping Huang, Shaobin Wang

Research outputs 2022 to 2026

Among various advanced oxidation processes, coupled photocatalysis and heterogeneous Fenton-like catalysis (known as photo-Fenton-like catalysis) to generate highly reactive species for environmental remediation has attracted wide interests. As an emerging metal-free photocatalyst, graphitic carbon nitride (g-C3N4, CN) has been recently recognized as a promising candidate to catalyze robustly heterogeneous photo-Fenton-like reactions for wastewater remediation. This review summarizes recent progress in fabricating various types of CN-based catalysts for the photo-Fenton-like reaction process. Innovative engineering strategies on the CN matrix are outlined, ranging from morphology control, defect engineering, nonmetal atom doping, organic molecule doping to modification by metal-containing species. The photo-Fenton-like catalytic …

Go to article

A Novel Numerical Model Of Gelant Inaccessible Pore Volume For In Situ Gel Treatment, Jianqiao Leng, Xindi Sun, Mingzhen Wei, Baojun Bai Jun 2022

A Novel Numerical Model Of Gelant Inaccessible Pore Volume For In Situ Gel Treatment, Jianqiao Leng, Xindi Sun, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Inaccessible pore volume (IAPV) can have an important impact on the placement of gelant during in situ gel treatment for conformance control. Previously, IAPV was considered to be a constant factor in simulators, yet it lacked dynamic characterization. This paper proposes a numerical simulation model of IAPV. The model was derived based on the theoretical hydrodynamic model of gelant molecules. The model considers both static features, such as gelant and formation properties, and dynamic features, such as gelant rheology and retention. To validate our model, we collected IAPV from 64 experiments and the results showed that our model fit moderately …

Go to article

Designing The Electrode Geometry And Electrolyte To Enhance The Product Selectivity And Activity In Carbon Dioxide Electroreduction, Samaneh Sharifi Golru Jun 2022

Designing The Electrode Geometry And Electrolyte To Enhance The Product Selectivity And Activity In Carbon Dioxide Electroreduction, Samaneh Sharifi Golru

Dissertations, Theses, and Capstone Projects

Excessive utilization of the fossil fuels due to the rapid growth of the global population has resulted in a dramatic increase in the carbon dioxide (CO2) level in the atmosphere which is the main reason for global warming and climate change. Therefore, green technologies are in high demand to develop carbon-neutral energy cycles. In this regard, CO2 electroreduction (CO2ER) has been proposed as a promising approach for CO2 utilization. CO2ER can mitigate the CO2 level in the atmosphere as well as produce value-added chemicals and fuels at ambient conditions. Despite the benefits of CO2 …

Go to article

One Factor At A Time Analysis To Modify Potting Technique For Manufacturing Of Bubble-Free High-Voltage Polyester Insulated Automotive Coils, Ahmad Nawaz, Ishaq Ahmad, Waseem Akram, Bilal Islam, Danil Yurievich Pimenov, Khaled Giasin, Muhammad Aamir Jun 2022

One Factor At A Time Analysis To Modify Potting Technique For Manufacturing Of Bubble-Free High-Voltage Polyester Insulated Automotive Coils, Ahmad Nawaz, Ishaq Ahmad, Waseem Akram, Bilal Islam, Danil Yurievich Pimenov, Khaled Giasin, Muhammad Aamir

Research outputs 2022 to 2026

The current study focuses on minimising the bubbles in polyester-insulated ignition coils, which were produced with a defect level of ~21–25% or 210–250 coils per 1000 batch size by using the potting method. This high-level rejection makes a substantial financial impact by increasing waste material, manufacturing, and after-sales costs. Hence, to control the bubbled problem without using expensive and maintenance-heavy techniques, the process parameters in the potting method were alternated and investigated using one factor at a time, which played a vital role in the formation/ reduction of bubbles in the ignition coil insulation. Process parameters, including pre/process heating, the …

Go to article

First Prev Next Last