Chemical Engineering Commons^™

Catalytic Utilization Of Carbon Dioxide As Renewable Feedstock For Production Of Chemicals And Fuels, Abbas Alaa Jawad

Doctoral Dissertations

"The utilization of CO₂ as a renewable feedstock for producing commodity chemicals and fuels is an interesting challenge to explore new concepts and opportunities in catalysis and industrial chemistry. This sustainable approach not only leads to production of useful chemicals, but also has the potential to mitigate anthropogenic CO₂ emissions to the atmosphere. CO₂ itself is a sustainable and inexhaustibly available carbon source, however, it is inextricably linked to its inherent inertness. It is a thermodynamically stable molecule (ΔG_f = -394.01 kJ.mol^-1) with high oxidation state, hence, reactions of CO₂ must be combined …

Continuous-Flow Synthesis Of Fine Chemicals And Pharmaceutical Compounds Over Intelligent Organocatalysts With Bifunctional Reactivity, Abdo-Alslam Alwakwak

Doctoral Dissertations

“Many biological systems that utilize organic active sites to catalyze reactions under mild conditions invoke cooperative catalytic pathways, whereby two or more active sites work together to activate the reactant(s). The use of cooperative (bifunctional) catalysts and continuous flow chemistry (a reaction within the narrow channels of a micro‐ or microfluidic reactor) are commonplace in sustainable chemical transformation and attract a great deal of interest with respect to economic and environmentally-sustainable production of fine chemicals, pharmaceuticals, and agrochemicals, water treatment, as well as upgrading of biomass feedstocks. Although, some methods have been developed for immobilization of bifunctional catalysts for cooperative …

Enhanced Electrochemical Performance Of Li-Ion Battery Cathodes By Atomic Layer Deposition, Yan Gao

Doctoral Dissertations

”Li-ion battery now plays an irreplaceable role in supplying green and convenient energy. In this work, atomic layer deposition (ALD) was used to modify Li-ion battery cathode particles for performance enhancement.

An ultrathin and conductive CeO₂ ALD film was deposited on Li-rich layered cathode particles, of which the specific capacity and cyclic stability were significantly improved. On the same cathode particles, FeO_x ALD and post-annealing resulted in a stable and conductive surface spinel phase to improve the performance.

Synergetic TiN coating and Ti doping were performed on a LiFePO₄ (LFP) cathode and extended its cycle life. The …

Structured Catalysts Designed And Manufactured By 3d-Printing Technique For Functional Integration Of Catalytic Systems, Fatima Magzoub

Doctoral Dissertations

"Microporous zeolites are widely used as heterogeneous catalysts in a wide variety of chemical and petrochemical industries to produce value-added chemicals and fuels, owing to their large surface area, acid-base properties, high thermal stability, and excellent shape-selectivity.

The overall goal of this research was to shape engineer composite zeolites and fine-tune their physiochemical properties to improve the catalytic production of dimethyl ether (DME) and light olefins that are typically used as substitution to diesel fuel and polymer precursors, respectively. Specifically, HZSM-5 and silicalite-1 zeolites were formulated into monolithic contactors using 3D printing technique, followed by subsequent SAPO-34 crystals growth through …

Exploring Wellbore And Reservoir Temperature Profiles In Fluid Circulation And Production Operations, Ahmed Qasim Al Saedi

Doctoral Dissertations

"The wellbore heat flow occurs during different well operations resulting from any temperature differences between the wellbore fluid and the adjacent formation. Understanding the direction and mechanism of heat flow whether it is conduction or convection help to represent this heat exchange mathematically. However, the only available factor used to understand the heat flow behavior is the measured wellbore temperature which can be obtained from the direct measurement while drilling or circulation operations, well logging, well test, or from the production operations. Also, the initial geothermal formation temperature resulting from the geothermal gradient will help to understand the undistributed formation …

Investigating The Factors Impacting The Success Of Immiscible Carbon Dioxide Injection In Unconventional Shale Reservoirs: An Experimental Study, Sherif M. Fakher

Doctoral Dissertations

"Unconventional shale reservoirs are currently gaining significant interest due to the huge hydrocarbon volumes that they bear. Enhanced oil recovery (EOR) techniques have been suggested to increase recovery from shale reservoirs. One of the most promising EOR methods is gas EOR (GEOR), most notably carbon dioxide (CO₂). Not only can CO₂ increase oil recovery by interacting with the oil and the shale, but it has also been shown to adsorb to the shale rock and thus is effective in both EOR applications and also carbon storage purposes. This research aims to experimentally investigate several of the interactions …

Evaluation Of The Performance Of Different Polymer Gel Systems As An In-Depth Gel Treatment Using Numerical Simulation, Tariq K. Khamees

Doctoral Dissertations

"Oil production from heterogeneous and naturally fractured reservoirs are usually hindered due to the presence of high-permeability streaks and natural fractures networks. Oil production could be more lowered if there is a crossflow from the high- to the low-permeability layers and high mobility ratio. These problems are called conformance problems and the treatment is called conformance improvement technologies (CITs). The aims of CIT is to correct the heterogeneity of the reservoir and to lower the unfavorable mobility ratio. These technologies are leading to the diversion of post-treatment water into the low-permeability layers and to increase the viscosity of the displacing …

Experimental And Modeling Studies Using Packed Bed Reactors: Liquid Phase Ethylene Production By Hydrogenation Of Acetylene, Humayun Shariff

Doctoral Dissertations

"Gas-phase catalytic hydrogenation of acetylene to produce ethylene, commonly practiced in industries, has green oil formation, which leads to catalyst deactivation and sometimes reactor runaway risks due to high exothermicity. To overcome these issues as well as to increase the selectivity and conversion, liquid-phase hydrogenation of acetylene was investigated in packed bed reactors (PBR) using a commercial catalyst. The reactor performance of two-phase flow PBRs was assessed experimentally complemented by a validated mathematical model at different scales.

The selective hydrogenation of acetylene in the liquid phase over a commercial 0.5 wt% Pd/Al₂O₃ catalyst was investigated in a …

Polymeric Nanoparticle As A New Platform For High Removal Of Endotoxins From Biopharmaceutical Solutions, Sidharth Razdan

Doctoral Dissertations

"Presently, approximately one-third of all biopharmaceutical drugs are derived from biological sources like gram-negative bacteria. Gram-negative bacteria like E.coli are much cheaper to cultivate and provide higher biotherapeutic yield compared to mammalian cells. On extracting the useful biotherapeutics from the gram-negative bacterial cells (E.coli), endotoxin present in the bacteria is released in the surrounding media thus contaminating the lifesaving biotherapeutics. Application of the endotoxin-contaminated therapeutics to humans or animals can cause serious health issues like septic shock, tissue injury and ultimately death. Hence, thorough purification of biotherapeutics before parenteral application is necessary. Although there are multiple methods for …

Synergistic Effect Of Hydrophilic Nanoparticles And Anionic Surfactant On The Stability And Viscoelastic Properties Of Oil In Water (O/W) Emulations; Application For Enhanced Oil Recovery (Eor), Sarmad Al-Anssari, Zain-Ul-Abedin Arain, Haider A. Shanshool, Alireza Keshavarz, Mohammad Sarmadivaleh

Research outputs 2014 to 2021

With the rapidly increased global energy demand, great attention has been focused on utilizing nanotechnology and particularly nanofluids in enhanced oil recovery (EOR) to produce more oil from low-productivity oil reservoirs. Nanofluid flooding has introduced as one of the promising methods for enhanced oil recovery using environment-friendly nanoparticles (NPs) to be as an innovative-alternative for chemical methods of EOR. This work investigates the synergistic effects of anionic surfactant and hydrophilic silica nanoparticles on the stability and the mechanical behavior of oil in water (O/W) emulsions for their application in EOR. To achieve this, an extensive series of experiments were conducted …

Enhanced Glucose Electrooxidation At Ni-Cu Binary Oxide Nanocatalyst, Islam M. Al-Akraa, Mahmoud M. Abouzaid Eng, Yaser M. Asal Mr, Ahmad M. Mohammad Prof

Chemical Engineering

The aim of this study is to fabricate a nickel (NiOx) and copper (CuOx) oxide nanocatalyst on a glassy carbon (GC) electrode (will be abbreviated as Ni-Cu/GC) for glucose oxidation (GO). A sequential electrodepositon mode was applied to assemble NiOx and CuOx in the fabrication scheme. The optimization of Ni loading on the GC surface (will be abbreviated as Ni/GC electrode) was achieved first to attain the maximum catalytic efficiency in terms of the specific current toward GO. This (409 Ag1)was obtained by applying 15 mC/cm2 in the deposition of Ni. However, unfortunately the NiOx/GC could not support a long-term …

Effect Of The Electrodeposition Potential Of Platinum On The Catalytic Activity Of A Pt/Gc Catalyst Toward Formic Acid Electro−Oxidation, Islam M. Al-Akraa, Bilquis A. Al-Qodami Ms., Ahmad M. Mohammad Prof

Chemical Engineering

The electrocatalytic activity of platinum (Pt)–modified glassy carbon (GC) (referred as Pt/GC) electrodes toward the formic acid electro−oxidation (FAO) was investigated. The Pt deposition on the GC substrate was carried out by a potentiostatic technique at different potentials (from 0.2 V to −0.2 V vs. Hg/Hg2Cl2/KCl (sat.) reference electrode) and the corresponding influence on the catalytic activity toward FAO was monitored. The electrocatalytic inspection revealed a potential role for the Pt deposition potential in boosting the catalytic efficiency of the catalyst toward FAO and further in mitigating the CO poisoning that eventually deactivate the catalyst. Interestingly, the highest activity toward …

Development Of Novel Adsorbent For Industrial Waste Water Treatment, Islam M. Al-Akraa, Hassan M. Shehata Eng, Dalia A. Ali Eng., Hoda A. Elsawy Dr

Chemical Engineering

The main objective of this research project is to perform some experimental procedures to inform the ability of the novel adsorbent used in this project. The chemical modification of the adsorbent is the chemical oxidation of pure powder chitosan using some specific redox pairs which are potassium dichromate and sodium bisulphite. After preparing the modified chitosan, there are some parameters that must be discussed during the adsorption process. The first parameter is the time parameter, showing experimentally the optimum time for adsorption under certain conditions by collecting values of absorbance and concentration of thymol blue adsorbed after the process from …

A Spin-Coated Tiox/Pt Nanolayered Anodic Catalyst For The Direct Formic Acid Fuel Cells, Islam M. Al-Akraa, Ahmad M. Mohammad Prof

Chemical Engineering

The CO poisoning of the platinum anodic catalyst which typically functions the catalytic deterioration of the direct formic acid fuel cells could be minimized with a simple modification for Pt with titanium oxide. The fabrication scheme involved the spin-coating of a Ti precursor onto a Pt thin layer that was physically sputtered onto a Si substrate. The whole assembly was subjected to a post-annealing processing to produce the TiOx layer (60 nm) in a porous structure (mostly Anatase) atop of the Pt surface. The porous nature of the TiOx layer permitted the participation of Pt in the electrocatalysis of the …

Application Of Immobilized Palladium Monolithic Catalysts In Suzuki-Miyaura And Tsuji-Wacker Redox Reactions, Sajjad Ghobadi

Theses and Dissertations

Herein, a wholistic analysis of the viability of monolithic catalysts for redox reactions is presented. The interdisciplinary approach taken in this systematic study included preparation and investigation on Pd-on-carbon monoliths as catalysts in a flow and electrochemical settings.

The Suzuki-Miyaura reaction-focused study led to rational design, preparation, and successful application of Pd⁰-on-graphene oxide (GO) monolithic catalysts in flow conditions. In this study a combination of chemical reduction, freeze-casting, and vapor-phase reduction processes was applied to Pd-GO structures leading to the preparation of these monoliths. The Suzuki flow synthesis reactions revealed that the monolithic structure led to significantly improved …

Synthesis Of Lamno3 & Ceo2-Mnox Nanocrystals For Selective Catalytic Reduction, Joseph Lane

Honors Capstones

No abstract provided.

Process Data Analytics Using Deep Learning Techniques, Majid Moradi Aliabadi

Wayne State University Theses

In chemical manufacturing plants, numerous types of data are accessible, which could be process operational data (historical or real-time), process design and product quality data, economic and environmental (including process safety, waste emission and health impact) data. Effective knowledge extraction from raw data has always been a very challenging task, especially the data needed for a type of study is huge. Other characteristics of process data such as noise, dynamics, and highly correlated process parameters make this more challenging.

In this study, we introduce an attention-based RNN for multi-step-ahead prediction that can have applications in model predictive control, fault diagnosis, …

Energy Conservation And Heat Transfer Enhancement For Mixed Convection On The Vertical Galvanizing Furnace, Dan Mei, Yuzheng Zhu, Xuemei Xu, Futang Xing

Mechanical & Aerospace Engineering Faculty Publications

The alloying temperature is an important parameter that affects the properties of galvanized products. The objective of this study is to explore the mechanism of conjugate mixed convection in the vertical galvanizing furnace and propose a novel energy conservation method to improve the soaking zone temperature based on the flow pattern and heat transfer characteristics. Herein, the present study applied the k-ε two-equation turbulence model to enclose the Navier-Stokes fluid dynamic and energy conservation equations, and the temperature distributions of the steel plate and air-flow field in the furnace were obtained for six Richardson numbers between 1.91 ⋅ 10^{5 …}

Mixing Optimization In Grooved Serpentine Microchannels, Tyler Rhoades, Chandrasekhar R. Kothapalli, Petru S. Fodor

Chemical & Biomedical Engineering Faculty Publications

© 2020 by the authors. Licensee MDPI, Basel, Switzerland. Computational fluid dynamics modeling at Reynolds numbers ranging from 10 to 100 was used to characterize the performance of a new type of micromixer employing a serpentine channel with a grooved surface. The new topology exploits the overlap between the typical Dean flows present in curved channels due to the centrifugal forces experienced by the fluids, and the helical flows induced by slanted groove-ridge patterns with respect to the direction of the flow. The resulting flows are complex, with multiple vortices and saddle points, leading to enhanced mixing across the section …

Role Of The Adhesion Torque On Spiky Particles Deposition, Kailian Davis

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Two-Dimensional Nanomaterials And Their Composites For Electrochemical Detection Of Toxic Mercury Ions In Water, Md Tawabur Rahman

Electronic Theses and Dissertations

The presence of trace amounts of mercury ion (Hg²⁺) in drinking water has a detrimental effect on human health. The development of an electrochemical sensor for Hg²⁺ detection is still challenging to obtain ultra-trace sensitivity, excellent selectivity, wide Linear Detection Ranges (LDRs), and ultra-low detection limit. This work presents an electrochemical sensor based on two-dimensional nanomaterials and their composites for the enhanced sensing of Hg²⁺ in water. Graphene oxide (GO)-silver nanowires (AgNWs) composite and metallic 1T phase tungsten disulfide (WS2) microflowers were utilized for the fabrication of electrochemical sensors using drop-casting. Under the optimized experimental conditions, …

Chemical And Thermal Sintering Of Supported Metals With Emphasis On Cobalt Catalysts During Fischer−Tropsch Synthesis, Mahmood Rahmati, Mohammad-Saeed Safdari, Thomas H. Fletcher, Morris D. Argyle, Calvin H. Bartholomew

Faculty Publications

This comprehensive critical review combines, for the first time, recent advances in nanoscale surface chemistry, surface science, DFT, adsorption calorimetry, and in situ XRD and TEM to provide new insights into catalyst sintering. This work provides qualitative and quantitative estimates of the extent and rate of sintering as functions of nanocrystal (NC) size, temperature, and atmosphere. This review is unique in that besides summarizing important, useful data from previous studies, it also advances the field through addition of (i) improved or new models, (ii) new data summarized in original tables and figures, and (iii) new fundamental perspectives into sintering of …

Computational Fluid Dynamics Of Thermally Double Couple Reactor For Hydrogen Production Through Glycerol Reforming Using Heat From Methanol Production From Carbon Dioxide, Sasinun Thirabunjongcharoen

Chulalongkorn University Theses and Dissertations (Chula ETD)

Thermally double coupled reactor (TDCR) consisted of two concentric channels: 1) an inner tube to which CO₂ and H2 were fed as reactants for exothermic MS with Cu/ZnO/Al2O3 at 220°C and 50 bar, and 2) an outer annulus channel through which glycerol and steam were supplied for endothermic APGR with Pt/Al2O3 at 220˚C and 20 bar. The TDCR could operate without external heat supply when two reactions were coupled. A computational fluid dynamic (CFD) model was established to study this TDCR. Heat transfer from the exothermic channel to the endothermic channel helped increasing glycerol conversion when compared with a single …

Microgel Placement And Plugging Performance In Sand Filled Fracture For Conformance Control, Baihua Lin

Masters Theses

“Preformed particle gels (PPG) has been widely applied for conformance control in heterogeneous reservoirs with fractures and super-K channels. As a plugging agent, PPG could plug the fractures or high permeability streaks and divert the displacing fluid into low permeability matrix. Many studies have been conducted to investigate the potential of PPGs as a water cut reduction and improved oil recovery agent using homogeneous sandpacks or heterogeneous core samples with man-made open fractures. However, no research has been carried out to understand how PPG injection and plugging performance will be changed if the fractures are filled with sands. Herein, the …

Development Of Amine-Functionalized Mesoporous Alumina For Radioiodine Removal From Water, Mansour Mohammed Alsalbokh

Masters Theses

“Radioactive materials have spread due to careless disposal and nuclear disasters. Some radionuclides can exist in an aqueous media, like radioactive iodine. As a result, in this work amine-functionalized mesoporous alumina was developed to adsorb radioactive iodine from the liquid phase. Bismuth was incorporated, using a wet impregnation method, to test it as a possible silver replacement. Amine grafting was used to functionalize the surface of the mesoporous alumina. All materials prepared in this work were characterized by N₂ physisorption, FTIR and TGA to determine the textural properties, surface functionality, and amine loading. The synthesized materials were tested for …

Fabrication, Characterization And Applications Of Highly Conductive Wet-Spun Pedot:Pss Fibers, Ruben Sarabia Riquelme

Theses and Dissertations--Chemical and Materials Engineering

Smart electronic textiles cross conventional uses to include functionalities such as light emission, health monitoring, climate control, sensing, storage and conversion of energy, etc. New fibers and yarns that are electrically conductive and mechanically robust are needed as fundamental building blocks for these next generation textiles.

Conjugated polymers are promising candidates in the field of electronic textiles because they are made of earth-abundant, inexpensive elements, have good mechanical properties and flexibility, and can be processed using low-cost large-scale solution processing methods. Currently, the main method to fabricate electrically conductive fibers or yarns from conjugated polymers is the deposition of the …

Coarse-Grained Dynamically Accurate Simulations Of Ionic Liquids At Vacuum-Interface, Tyler D. Stoffel

Theses and Dissertations--Mechanical and Aerospace Engineering

Ionic liquids, possessing improved properties in many areas of technical application, are excellent candidates as components in development of next-generation technology, including ultra-high energy batteries. If they are thus applied, however, extensive interfacial analysis of any selected ionic configuration will likely be required. Molecular dynamics (MD) provides an advantageous route by which this may be accomplished, but can fall short in observing some phenomena only present at larger time/length scales than it can simulate. Often times this is approached by coarse-graining (CG), with which scope of simulation can be significantly increased. However, coarse-grained MD systems are generally known to produce …

Organophosphorus-Hydrazides As Potential Reactive Flame Retardants For Epoxy, Alexander B. Morgan, Vladimir Benin, Donald A. Klosterman, Abdulhamid Bin Sulayman, Mustafa Mukhtar, Mary L. Galaska

Chemical and Materials Engineering Faculty Publications

For structural composites used in vehicles and aircraft, flame retardant chemistries which enhance char formation and reduce heat release are preferred. Phosphorus-based and phosphorus–nitrogen flame retardants for epoxies have been well studied to date, but phosphorus hydrazides have not been studied for their flame-retardant potential in epoxy. These hydrazides offer some novel structures and they can potentially offer a combination of vapor and condensed phase flame retardant action. A series of eight compounds were systematically investigated in this study as reactive flame retardants in a bisphenol F epoxy/aliphatic amine resin system at a level of 2.5 wt% phosphorus. Results suggest …

Radio Frequency Studies Of Soot Loading And Ammonia Storage On A Diesel Particulate Filter With A Scr Catalyst Coating, Shreyans Sethia

Dissertations, Master's Theses and Master's Reports

The radio frequency (RF) measurement technique has been shown to be a viable method for measurement of the amount of soot loaded onto DPF’s ^[1] and the amount of NH₃ stored on SCR catalysts ^[2]. In one of the configurations, a microwave resonant cavity is formed by the metal can encasing the enclosed catalyst. Two metal probes acting as antennas are placed on either side of the catalyst. Power transmitted between the antennas is monitored as the frequency of the signal is swept. At certain frequencies, resonance is achieved. Measurements of the resonance frequencies, amplitude at resonance, and …

Systems Analysis For Sustainability Assessment Of Biogas And Bio-Ch4 Production From Food Waste And Dairy Manure Mixtures In The Us, Sharath Kumar Ankathi

Dissertations, Master's Theses and Master's Reports

The purpose of the dissertation is to relate systems analysis for bioenergy to identify optimum configurations for improved scenarios and to make better decisions in a systems perspective.

Chapter 1 is a review of the literature to identify the state of the knowledge in terms of systems analysis for anaerobic digestion (AD) bioenergy systems. The key outcomes from this review showed that anaerobic digestion of mixtures of food waste and animal manure has great potential to achieve economic and environmental benefits compared to other treatments of organic waste materials, such as landfilling or conventional manure management.

Chapter 2 focuses on …