Chemical Engineering Commons^™

Measurement Of Peptoid Concentration Using Uv Spectroscopy, Katie Holland

Chemical Engineering Undergraduate Honors Theses

The goal of this research is to establish a relationship between ultraviolet adsorption and peptiod concentration to be used to determine the concentration of an unknown peptoid sample. This will allow for the measurement of concentration differences of peptoid samples before and after incubation with membrane surfaces. Samples were prepared nine know concentrations and diluted 50 fold. The UV absorbances of each sample was measured using a UV spectrophotometer at wavelengths from 200 to 450 nanometers. This process was repeated, and the maximum absorbance of each replicate was averaged to yield an absorbance value for each concentration of peptoid. …

Comparison Study Between Post-Fermentation Stillage And Pre-Fermentation Mash Utilizing Acidification And Steam Explosion Techniques For Cellulose Saccharification, Daniel Mckee

Master's Theses

Pre-fermentation mash fiber and post-distillation stillage fiber were examined and compared using a variety of preparatory techniques to determine the better source for cellulose fiber saccharification. Once screened, dried, and diluted to a 10% solution, mash fiber and stillage fiber were exposed to increasing temperatures for steam explosion techniques as well as increasing acidification techniques. Both underwent enzymatic saccharification to convert the exposed cellulose to glucose and other sugars. Once the optimum steam explosion technique parameters and acidification parameters were determined to be 2.5% sulfuric acid at 127.8°C for 1 hour, a comparison of the saccharification of pre-fermentation mash fiber …

Self-Generated Absorption Filter Based Optical Densitometry Calculations For Expanded Gamut And Spot Color Printing On Paperboard For Packaging Applications And Proposed Oba Index, Awadhoot Vijaykant Shendye

Dissertations

In the printing industry, process color printing is a very common way of reproduction of color photographic images. As continuous tone reproduction is not possible, images are converted to halftone format. Process control of a halftone image quality is carried out by measuring optical density of solid patches. ISO 5 defines measurement of optical density, formula, filters and requirements. As per ISO document optical density can be calculated only for the 4 colors cyan, magenta, yellow and black, known as process colors. To enhance quality of color reproduction of images, the number of reproducible colors are increased by gamut expansion. …

Artificial Olfactory System For Multi-Component Analysis Of Gas Mixtures., Alexander Aleksandrovich Larin

Electronic Theses and Dissertations

Gas analysis is an important part of our world and gas sensing technology is becoming more essential for various aspects of our life. A novel approach for gas mixture analysis by using portable gas chromatography in combination with an array of highly integrated and selective metal oxide (MOX) sensors has been studied. We developed a system with small size (7 x 13 x 16 inches), low power consumption (~10 W) and absence of special carrier gases designed for portable field analysis (assuming apriori calibration). Low ppb and even sub-ppb level of detection for some VOCs was achieved during the analysis …

Nanoparticle-Based Plasmonic Transduction For Modulation Of Electrically Excitable Cells, Parveen Bazard, Robert D. Frisina, Joseph P. Walton, Venkat R. Bhethanabotla

Chemical and Biochemical Engineering Faculty Research & Creative Works

There is a compelling need for the development of new sensory and neural prosthetic devices which are capable of more precise point stimulation. Current prosthetic devices suffer from the limitation of low spatial resolution due to the non-specific stimulation characteristics of electrical stimulation, i.e., the spread of electric fields generated. We present a visible light stimulation method for modulating the firing patterns of electrically excitable cells using surface plasmon resonance phenomena. In in-vitro studies using gold (Au) nanoparticle-coated nanoelectrodes, we show that this method (substrate coated with nanoparticles) has the potential for incorporating this new technology into neural stimulation prosthetics, …

Synthesis Of Regioselectively Acylated Quercetin Analogues With Improved Antiplatelet Activity, Yu Duan, Na Sun, Min Xue, Xiaolan Wang, Hu Yang

Chemical and Biochemical Engineering Faculty Research & Creative Works

The aim of the present study was to report on a complete synthetic approach, namely benzylation-hydrolysis-acylation-hydrogenation, to the synthesis of regioselectively acylated quercetin analogues using low-cost rutin as a starting material. Three quercetin analogues, quercetin-3-O-propionate (Q-pr), quercetin-3-O-butyrate (Q-bu) and quercetin-3-O-valerate (Q-va), containing 3-, 4- and 5-carbon aliphatic acyl chains, respectively, were synthesized and characterized with ¹H nuclear magnetic resonance (NMR), ¹³C NMR and mass spectrometry. Compared with quercetin, all three analogues exhibited improved lipophilicity. The lipophilicity of the analogue increased with increasing acyl chain length. Q-va exhibited the highest lipophilicity among the three analogues, but a lower water …

A High Quality And Quantity Hybrid Perovskite Quantum Dots (Cspbx3, X= Cl, Br And I) Powders Synthesis Via Ionic Displacement, Yuhang Yin, Weiling Luan, Chengxi Zhang, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Recently, all-inorganic perovskites CsPbX₃ (X= Cl, Br and I) quantum dots (QDs) have drawn great attentions because of their PL spectra tunable over the whole visible spectral region (400-700 nm) and adjustable bandgap, which revealed a promising potential on the field of photoelectronic devices, such as solar cells, LEDs and sensors. In this paper, CsPbX₃ QDs and hybrid QDs, CsPbClxBr3-x and CsPbBrxI3-x were synthesized via one-step and two-step methods comparably. The optical bandgaps of CsPbCl₃, CsPbBr₃, and CsPbI₃, were calculated as 3.08, 2.36, and 1.73eV, respectively, based on the Tauc's equation and …

A Molecular Simulation Study Of Antibody-Antigen Interactions On Surfaces For The Rational Design Of Next-Generation Antibody Microarrays, Derek B. Bush

Theses and Dissertations

Antibody microarrays constitute a next-generation sensing platform that has the potential to revolutionize the way that molecular detection is conducted in many scientific fields. Unfortunately, current technologies have not found mainstream use because of reliability problems that undermine trust in their results. Although several factors are involved, it is believed that undesirable protein interactions with the array surface are a fundamental source of problems where little detail about the molecular-level biophysics are known. A better understanding of antibody stability and antibody-antigen binding on the array surface is needed to improve microarray technology. Despite the availability of many laboratory methods for …

Improving Thermodynamic Consistency Among Vapor Pressure, Heat Of Vaporization, And Liquid And Ideal Gas Heat Capacities, Joseph Wallace Hogge

Theses and Dissertations

Vapor pressure (P_vap), heat of vaporization (ΔH_vap), liquid heat capacity (C_p^l), and ideal gas heat capacity (C_p^ig) are important properties for process design and optimization. This work focuses on improving the thermodynamic consistency and accuracy of the aforementioned properties since these can drastically affect the reliability, safety, and profitability of chemical processes. They can be measured for pure organic compounds from the triple point, through the normal boiling point, and up to the critical point. Additionally, ΔH_vap is proportional to the derivative of vapor …

A Comparison Of Mean Age Theory And Residence Time Distributions In Mixed Systems., Nolan Theaker

Electronic Theses and Dissertations

A comparison between mean age theory and conventional residence time distributions over a range of quantified mixing levels was conducted using computational fluid dynamics (CFD). The system was a stirred tubular reactor. The model was validated by comparing computationally derived RTD curves with experimentally obtained RTD curves, with quantified differences less than 3%. Mixing was quantified using the Tanks-in-Series model. Mixing levels were set by varying flow rate and impeller rpm. Mean age distributions at the outlet, where experimental RTD’s were measured, were very narrow for all levels of mixing studied. RTD’s showed expected characteristics; a wider distribution and long …

Papermaking Factors Affecting Lateral Web Position During Commercial Heat Set Web Offset Printing, George W. Shields

Masters Theses

The interaction of water with paper plays a role in web handling characteristics during commercial heat set web offset printing. Water absorption leads to lower web tension for a given strain.

This research investigates paper properties and their role in preventing lateral web movement from cross machine air flows in the drying section during normal printing operations. Tensile properties of sheets are measured at various moisture contents and then used to determine the equilibrium stress-strain relationship for papers at moisture contents typical of heat set web offset printing. Permeability, fiber orientation and tensile stiffness are evaluated against lateral web movement …

Anodic Catalysts For Anion Exchange Membrane Fuel Cells, Aaron Joseph Roy

Chemical and Biological Engineering ETDs

With a limited availability of energy resources from petroleum and other fossil fuels, as well as growing concerns relating to the environmental implications of fossil fuel emissions, non-carbon fuels which can be utilized in proton and anion exchange membrane fuel cells (PEMFC’s/AEMFC’s), such as hydrogen and hydrazine hydrate (HH), are becoming more attractive as alternative fuels. Historically, platinum and platinum group metal catalysts (PGM) have been used as cathode and anode catalyst materials for both PEMFC’s and AEMFC’s. Although these catalysts are the highest performing catalysts available for the conversion of hydrogen energy in fuel cells, the limited availability and …

Peptoid-Modified Bicelles As Surrogate Cell Membranes For Membrane Protein Sensors And Analytics, Helya Najafi

Graduate Theses and Dissertations

Membrane-affiliated interactions are significant in understanding cell function, detecting biomarkers to diagnose disease, and in testing the efficiency of new therapeutic targets. Model membrane systems have been developed to study membrane proteins, allowing for stable protein structure and maintaining native activity. Bicelles, disc-shaped lipid bilayers created by combining long- and short-chain phospholipids, are the model membrane system of focus in this study. Bicelles are accessible from both sides and have a wide size range, which make them attractive for studying membrane proteins without affecting function. In this work, bicelles were functionalized with two peptoids to alter the edge and face …

Green Chemistry Oxidative Modification Of Peptoids Utilizing Bleach And Tempo, Jesse Leland Roberts

Graduate Theses and Dissertations

Biotherapeutic drugs, derived from biological molecules such as proteins and DNA, are becoming an integral and exceptionally critical aspect of modern medicine. Compared to common pharmaceutical drugs, biotherapeutics are much larger in size and have greater target specificity, allowing them to treat many chronic diseases ranging from cancer to rheumatoid arthritis. The major issue with protein based therapeutics is that they readily undergo proteolysis, or enzymatic degradation, when administered through subcutaneous injections. Traditionally, biotherapeutic modification procedures have centered on the use of PEG derivatives. This process, called PEGylation, is unfavorable due to the increases in molecular weights of the proteins …

Ptfe-Based Microreactor System For The Continuous Synthesis Of Full-Visible-Spectrum Emitting Cesium Lead Halide Perovskite Nanocrystals, Chengxi Zhang, Weiling Luan, Yuhang Yin, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Colloidal perovskite nanocrystals comprised of all inorganic cesium lead halide (CsPbX₃, X = Cl, Br, I or a mixture thereof) have potential as optical gain materials due to their high luminescence efficiency. In this work, cesium lead halide nanocrystals are continuously synthesized via a microreactor system consisting of poly(tetrafluoroethylene) (PTFE) capillaries. The synthesized nanocrystals possess excellent optical properties, including a full width at half maximum of 19–35 nm, high fluorescence quantum yield of 47.8–90.55%, and photoluminescence emission in the range of 450–700 nm. For the same precursor concentrations, the photoluminescence emission peak generally increases with increasing reaction temperature, …

Non-Additive Impacts Of Covalent Cross-Linking On The Viscoelastic Nanomechanics Of Ionic Polyelectrolyte Complexes, B. Han, T. Ma, J. H. Vergara, Giuseppe R. Palmese, J. Yin, D. Le

Henry M. Rowan College of Engineering Departmental Research

This study elucidates the influences of adding covalent cross-linking on the nanomechanical viscoelasticity of ionically cross-linked polyelectrolyte networks. Using layer-by-layer (LbL) assembled PAH/PAA networks, we report how adding covalent amide cross-links changes the degree of swelling, indentation modulus, and force relaxation behaviors with varying solution conditions such as pH and ionic strength, which modulate the ionic cross-link density and fixed charge density. The addition of covalent cross-linking increases both the modulus and degree of elasticity through providing permanent anchorage to the ionically linked networks. Such addition also strongly increases the relaxation times at net neutral, less swollen states. These results …

Effect Of Oxide On Surface Tension Of Molten Metal, Chunkai Li, Yu Shi, Yufen Gu, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Oxides as one of the commonly activating fluxes used in active tungsten inert gas welding (A-TIG welding) can dramatically increase the penetration depth to 2–4 times that of conventional welding. Using the oscillation principle of inviscid fluid, a robust method is developed to measure the average surface tension of molten metal during A-TIG welding for four different oxide activating fluxes of B₂O₃, TiO₂, SiO₂, and MgO. The experimental results suggest that the oxygen released from the decomposition of oxides is the dominant factor contributing to the change of the surface tension, which …

High-Throughput Droplet Barcoding And Automated Image Analysis In Microfluidic Droplet Trapping Array, Manibarathi Vaithiyanathan

LSU Master's Theses

Molecularly-targeted therapeutics and personalized medicine have dramatically increased the median survival rate of patients suffering from cancer. However, cellular heterogeneity and the personalized nature of cancer have resulted in the limited success of single drug treatments which has led to the use of multiple therapeutic combinations. This has required the development of new analytical methods capable of multiplexed high-throughput screening (HTS) technologies necessary to identify is single or multi-agent therapies are effective in ex vivo samples like liquid biopsies. Droplet microfluidic devices have garnered significant interest to facilitate high-throughput, single cell analysis of heterogeneous populations. However, these devices are still …

Mechanistic Modeling Of Nanoparticle-Stabilized Supercritical Co2 Foams And Its Implication In Field-Scale Eor Applications, Doris Patricia Ortiz Maestre

LSU Master's Theses

Previous experimental studies show that nanoparticle-stabilized supercritical CO₂ foams (or, NP CO₂ foams) can be applied as an alternative to surfactant foams, in order to reduce CO₂ mobility in gas injection enhanced oil recovery (EOR). These nanoparticles, if chosen correctly, can be an effective foam stabilizer attached at the fluid interface in a wide range of physicochemical conditions.

By using NP CO₂ foam experiments available in the literature, this study performs two tasks: (i) presenting how a mechanistic foam model can be used to fit experimental data and determine required model parameters, and (ii) investigating the …

Pollution Prevention In The Great Lakes Basin: Working With Pulp & Paper Manufacturers, Eugene Park

Journal of Environmental Sustainability

In response to growing concerns over persistent toxic substances in the Great Lakes, new initiatives are in place to address and mitigate pollutant loadings to these large natural waterbodies. With support from the U.S. Environmental Protection Agency and New York Department of Environmental Conservation, the New York State Pollution Prevention Institute (NYSP2I) worked with pulp & paper companies in the Great Lakes Basin in an effort to find solutions to reduce environmental impacts from this industry sector. Based on currently available EPA toolkits, NYSP2I developed and utilized an assessment tool called Lean, Energy, and Environment (LE2). Five different paper manufacturers …

Microbial Desalination Cells With Efficient Platinum Group Metal-Free Cathode Catalysts, Morteza Rezaei Talarposhti

Chemical and Biological Engineering ETDs

Iron-nitrogen-carbon based catalyst was used at the cathode of a microbial desalination cell (MDC) and compared with platinum (Pt) and activated carbon (AC) cathode. Fe-N-C catalyst was prepared using nicarbazin (NCB) as organic precursor by sacrificial support method (SSM). Rotating ring disk electrode (RRDE) experiments shows that Fe-NCB had higher electrocatalytic activity compared to AC and Pt. The utilization of Fe-NCB into the cathode improved substantially the performance output with initial maximum power density of 49±2 μWcm^-2 in contrast to Pt and AC catalysts which have shown lower values of 34±1 μWcm^-2 and 23.5±1.5 μWcm^-2, respectively. …

The Control Of Water Contaminants Assisted By Natural Materials, Wen Zhao

USF Tampa Graduate Theses and Dissertations

Natural materials can be used to remove water contaminants by applying proper physical, chemical, and biological water treatment processes. This study involves using natural materials, as they are considered to be more environmentally benign and cost-effective than synthetic materials. This dissertation concentrates on monitoring five major water quality parameters—ammonia, fluoride, turbidity, pH, and fecal indicator bacteria (FIB) —in two major applications where clean water is needed. The focus is on meeting the water quality requirements for each contaminant. The overall objective of this study is to control the levels of ammonia in aquaculture wastewater, and adjust fluoride, turbidity, pH, and …

Green Synthesis Of Copper Oxide Nanoparticles In Aqueous Medium As A Potential Efficient Catalyst For Catalysis Applications, Hany A. Elazab Dr

Chemical Engineering

In this research, we have developed a reliable green method for the synthesis of copper oxide nanoparticles as a potential efficient catalyst for several catalysis applications. In our experimental approach, microwave-assisted synthesis technique was used in order to perform chemical reduction of copper salt using hydrazine hydrate as a strong reducing agent. The prepared catalyst was characterized using various techniques showing the formation of well dispersed copper oxide nanoparticles. The synthesized Copper oxide catalyst shows many advantages including the use of environmentally benign solvent systems,

What Happens To Nox Emissions Of Vw Diesel Cars When Water/Methanol Injection Is Used?, Andrew Croxell

ASA Multidisciplinary Research Symposium

Volkswagen has come under fire for their "Clean Diesel" automobiles that were found to emit too much NOx (Oxides of Nitrogen) when driven on the street. Since NOx is created by high temperature combustion events, the addition of a water/methanol injection system was tested on a VW diesel vehicle to identify if it could cool combustion temperatures and thus reduce NOx to an acceptable specification.

Gender And Participation In An Engineering Problem-Based Learning Environment, Laura Hirshfield, Milo D. Koretsky

Interdisciplinary Journal of Problem-Based Learning

The use of problem-based learning (PBL) is gaining attention in the engineering classroom as a way to help students synthesize foundational knowledge and to better prepare students for practice. In this work, we study the discourse interactions between 27 student teams and two instructors in an engineering PBL environment to analyze how participation is distributed among team members, paying particular attention to the differences between male and female students. There were no statistically significant differences between the amount that male and female students spoke; however, stereotypical gender roles and traditional gendered behavior did manifest in the discussion. Also, regardless of …

Life Cycle Analysis For Algae Biofuels-Using Local Situations To Factor In The Cost/Benefit Of High-End Products Along With Nutrient Remediation And Co2 Sequestration, John Korstad, Joe T. Moore

College of Science and Engineering Faculty Research and Scholarship

Algae as a feedstock for commercial biofuels is best suited for sunny and warm areas with abundant fresh, salt, or brackish water. Optimum areas worldwide are in the tropics. Logical areas in North America include the Southeast Gulf coast and perhaps New Mexico. Additional practical areas on smaller scale probably lie in metropolitan locations, especially near international airports. The cost-benefit of these endeavors can be enhanced when factors such as high-end products alongside collaboration with sewage treatment or other waste water remediation, industrial carbon dioxide sequestration, reduced transport distance of fuels, and other aspects of the local economy are taken …

Incorporation Of Catalytic Modalities For Forming Of A Catalytic Cascade, Albert T. Perry Iii

Nanoscience and Microsystems ETDs

This dissertation investigates the novel incorporation of inorganic and enzymatic catalysts. There is little literature on inorganic catalysts operating at biologically relevant pHs and as such a significant amount of this dissertation focuses on determination of catalyst activity. Mn amino-anitpyrene (MnAAPyr), Pt, Pt alloys, Mn-N-C and Pd catalysts on 3D graphene supports(3D-GNS), were explored for activity towards glycerol intermediates: oxalic acid, mesoxalic acid, glyoxalic acid, and formic acid. MnAAPyr was designed to mimic the reaction center of oxalate decarboxylase and oxalate oxidaze, the natural catalyst towards oxalic acid. It showed high activity towards oxalic acid, with onset potentials of 0.714±0.002V …

A Multiscale Modeling Study Of Particle Size Effects On The Tissue Penetration Efficacy Of Drug-Delivery Nanoparticles, Mohammad Aminul Islam, Sutapa Barua, Dipak Barua

Chemical and Biochemical Engineering Faculty Research & Creative Works

Background: Particle size is a key parameter for drug-delivery nanoparticle design. It is believed that the size of a nanoparticle may have important effects on its ability to overcome the transport barriers in biological tissues. Nonetheless, such effects remain poorly understood. Using a multiscale model, this work investigates particle size effects on the tissue distribution and penetration efficacy of drug-delivery nanoparticles.

Results: We have developed a multiscale spatiotemporal model of nanoparticle transport in biological tissues. The model implements a time-adaptive Brownian Dynamics algorithm that links microscale particle-cell interactions and adhesion dynamics to tissue-scale particle dispersion and penetration. The model accounts …

Metabolomic Effects Of Ceo₂, Sio₂ And Cuo Metal Oxide Nanomaterials On Hepg2 Cells, Kirk T. Kitchin, Steve Stirdivant, Brian L. Robinette, Benjamin T. Castellon, Xinhua Liang

Chemical and Biochemical Engineering Faculty Research & Creative Works

Background: To better assess potential hepatotoxicity of nanomaterials, human liver HepG2 cells were exposed for 3 days to five different CeO₂ (either 30 or 100 μg/ml), 3 SiO₂ based (30 μg/ml) or 1 CuO (3 μg/ml) nanomaterials with dry primary particle sizes ranging from 15 to 213 nm. Metabolomic assessment of exposed cells was then performed using four mass spectroscopy dependent platforms (LC and GC), finding 344 biochemicals.

Results: Four CeO₂, 1 SiO₂ and 1 CuO nanomaterials increased hepatocyte concentrations of many lipids, particularly free fatty acids and monoacylglycerols but only CuO elevated lysolipids and …

Modelling And Simulation Of Hydrogen Production Via Membrane Reactor, Aya Abdel-Hamid Smail Mourad

Chemical and Petroleum Engineering Theses

A membrane reactor is a promising device to produce pure hydrogen and enrich CO₂ from syngas. A simulation study of a double tubular catalytic membrane reactor for the water-gas shift reaction (WGS) under steady-state operation is presented in this work. The membrane consists of a dense Pd layer (selective to H₂) deposited on a porous glass cylinder support. The reaction side was filled with a commercial iron-chromium oxide catalyst, designed as Girdler G-3. The mass of the catalyst was 12.1 g and the height of the catalyst bed was 8 cm. The WGS model was carried out …