Chemical Engineering Commons^™

Development Of Nickel Oxide And Manganese Oxide Nanostructured Binary Modified Anodes For Methanol Electro-Oxidation, Ghada El-Nowihy

Chemical Engineering

No abstract provided.

Degradable Nanocomposite Preformed Particle Gel For Chemical Enhanced Oil Recovery Applications, Paul Tongwa

Doctoral Dissertations

”This work presents two new materials that can be potentially used in conformance control to increase ultimate oil recovery from mature oilfields.

The first product is a degradable nanocomposite preformed particle gel for enhanced in-depth mobility control. Three different types of degradable nanocomposite preformed particle gels were synthesized. These three nanocomposite hydrogels were made using Laponite XLG, Calcium Montmorillonite, and Sodium Montmorillonite nanomaterials. It was observed that after degradation, Laponite XLG nanocomposite hydrogels had the highest post-degradation viscosity (4437 cp), followed by sodium nanocomposite hydrogels (129 cp), and lastly calcium nanocomposite hydrogels (75.5 cp). Thus, degradable Laponite XLG nanocomposite hydrogels …

Semantic Model And Updated Screening Criteria For Polymer Flooding, Laila Dao Saleh

Doctoral Dissertations

"Enhanced oil recovery (EOR) processes produce oil that conventional methods leave behind, where interfacial forces, heavy oil viscosity, and reservoir heterogeneity make it difficult to produce. Many EOR methods are available but usually cannot be used at the same time for a candidate reservoir. Therefore, it is important to select the most appropriate EOR process from among the possible techniques. EOR screening criteria have been created using EOR datasets and serve as the first step to compare the suitability of each technique for a specific reservoir. Most of these datasets are based on field data collected from EOR surveys published …

Experimental And Computational Investigation Of Flow Of Pebbles In A Pebble Bed Nuclear Reactor, Vaibhav B. Khane

Doctoral Dissertations

"The Pebble Bed Reactor (PBR) is a 4th generation nuclear reactor which is conceptually similar to moving bed reactors used in the chemical and petrochemical industries. In a PBR core, nuclear fuel in the form of pebbles moves slowly under the influence of gravity. Due to the dynamic nature of the core, a thorough understanding about slow and dense granular flow of pebbles is required from both a reactor safety and performance evaluation point of view.

In this dissertation, a new integrated experimental and computational study of granular flow in a PBR has been performed. Continuous pebble re-circulation experimental set-up, …

Investigating And Modeling Tar-Mats In A Kuwaiti Carbonate Reservoir And Their Role In Understanding Oil Reserves And Recovery Economics, Abdullah Owidah Almansour

Doctoral Dissertations

"Tar-mat columns exist in many carbonate reservoirs in the Middle East. Historically, tar-mats have been thought to impede primary oil extraction, thus necessitating further improved oil recovery (IOR) technology applications. However, this research considers tar-mats as potential sources for unlocking extremely difficult crude oil, less than 5 ⁰API. The main objective of the study was to understand the qualitative physical and chemical properties of extremely viscous tar-mat oil and the quantitative potential of tar-mats to extract difficult oil.

The physical and chemical geneses of the tar-mat oil were analyzed utilizing several experimental geochemical techniques, including rock evaluation pyrolysis, liquid extracts …

A Modified Orthogonal Collocation Method For Reaction Diffusion Problems, Moustafa A. Soliman, Yousef S. Al-Zeghayer, Abdelhamid M. Ajbar

Chemical Engineering

A low-order collocation method is often useful in revealing the main features such as concentration and temperature profiles and the effectiveness factor for porous catalyst particles. Two modifications are introduced in this paper to make the method more efficient. The first modification is to add an extra collocation point at the center of the particle. It is shown that such extra point introduces a single variable non-linear equation to be solved after obtaining the standard collocation method solution. In the second modification, the polynomial solution obtained from the application of the orthogonal collocation method is transformed to a rational function …

Model-Based Energy Analysis Of An Integrated Midrex-Based Iron/Steel Plant, Abdelhamid M. Ajbar, Khalid I. Alhumaizi, Moustafa A. Soliman, Emadadeen Ali

Chemical Engineering

This article presents modeling and simulations of an integrated plant for the production of steel using the direct reduced iron (DRI)=electric arc furnace (EAF) route. In a previous work (Alhumaizi et al., 2012), a comprehensive mathematical model of an iron plant based on MIDREX technology was developed, validated, and simulated. In this article, the model is extended to account for an empirical model of an EAF plant. Numerical simulations were carried out for the effect of different operating parameters of the integrated plant. Useful profiles as well as a summary table were compiled to illustrate the results of the sensitivity …

Low-Dose Chemotherapy Of Hepatocellular Carcinoma Through Triggered-Release From Bilayer-Decorated Magnetoliposomes, Yanjing Chen, Yuan Chen, Da Xiao, Arijit Bose, Ruitang Deng, Geoffrey D. Bothun

Chemical, Biomolecular, and Materials Engineering Faculty Publications

Low-dose (LD) chemotherapy is a promising treatment strategy that may be improved by controlled delivery. Polyethylene glycol-stabilized bilayer-decorated magnetoliposomes (dMLs) have been designed as a stimuli-responsive LD chemotherapy drug delivery system and tested in vitro using Huh-7 hepatocellular carcinoma cell line. The dMLs contained hydrophobic superparamagnetic iron oxide nanoparticles within the lipid bilayer and doxorubicin hydrochloride (DOX, 2 μM) within the aqueous core. Structural analysis by cryogenic transmission electron microscopy and dynamic light scattering showed that the assemblies were approximately 120 nm in diameter. Furthermore, the samples consisted of a mixture of dMLs and bare liposomes (no nanoparticles), which provided …

Optical Properties Of Carbon Microcoils, Muneaki Hikita, Li Cao, Khalid Lafdi

Chemical and Materials Engineering Faculty Publications

Carbon microcoils (CMCs) have emerged as versatile material artifacts for a variety of applications due to their helical and spiral structures. Embedded in matrix, CMCs have already been demonstrated for their potential tactile/proximity sensor application. In this study, CMCs were prepared using a conventional chemical vapor deposition method, and then were functionalized with octadecylamine.

Upon photoexcitation, the functionalized CMCs exhibited photoluminescence in the visible region, which has never been found before. Similar to carbon based nanoparticles, the photoluminescence of CMCs was attributed to electron-hole radiative recombination after surface passivation. The results suggested that this kind of fluorescent functionalized CMCs might …

Design Of Functional Dendrimer Nanocarriers And Their Formulations In Propellant-Based Inhalers For Pulmonary Drug Delivery, Lin Yang

Wayne State University Dissertations

This Dissertation focuses on addressing two of the major challenges in developing pressurized metered dose inhalers for pulmonary drug / gene delivery to and through the lungs. First challenge is to design biocompatible moieties for the steric stabilization of suspension formulations in HFO-based propellants. Using a combination of tools including ab initio calculation, molecular dynamics simulation and high pressure tensiometry, potential fluorocarbon-philic moieties were systematically screened. Surfactants with those chemistries as tail fragments were studied at the HFO|H2O interface for their ability to lower the interfacial tension at HFO|H2O interface. Selected surfactants were further optimized for surfactant balance by altering …

Lab-Scale Fast-Hydropyrolysis And Vapor-Phase Catalytic Hydrodeoxygenation For Producing Liquid Fuel Range Hydrocarbons From Intact Biomass, Vinod Kumar Venkatakrishnan

Open Access Dissertations

Liquid transportation fuels are primarily produced from petroleum-based non-renewable carbon sources. Sustainably available lignocellulosic biomass, as a renewable form of atmospheric carbon, could be utilized to produce hydrocarbon-based fuels with high energy density. One of the process options for this conversion is the H2Bioil process, where biomass is rapidly heated in a hydrogen environment to produce fast-hydropyrolysis vapors that are catalytically upgraded in downstream hydrodeoxygenation (HDO) to produce hydrocarbons. This process has been modeled to have high carbon and energy efficiencies of ~70% and ~75%, respectively.

This dissertation presents the results of a lab-scale experimental proof-of-concept for the H2Bioil process …

Synthesis Of Nano-Sized Materials Using Atomic Layer Deposition, Sara Grace Simpson

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Biofuels Production Via Catalytic Hydrocracking Of Ddgs Corn Oil And Hydrothermal Decarboxylation Of Oleic Acid Over Transition Metal Carbides Supported On Al-Sba-15, Basem A. Al Alwan

Wayne State University Dissertations

The purpose of this research is to minimize the gap between the production of biofuels and the production of petroleum-based fuels by developing catalysts that can utilize renewable non-food based feedstocks (waste vegetable oils, algal oil, brown grease, etc.) and have great performance under low operation conditions. In particular, green diesel has become an attractive biofuel due to its superior properties that are quite similar to petroleum diesel. Therefore, no modifications are required to existing infrastructures. Three distinct experimental phases have been identified in order to achieve the objective of this work as follow:

First, the hydrocracking of distillers dried …

Pretreatment Of Cellulosic Biomass By Iron-Containing Magnetic Ionic Liquid Dissolution, Christopher Roth Riley

Electronic Theses and Dissertations

The focus of this project is to determine the effectiveness in the preprocessing of biomass when magnetic ionic liquids (MIL) (1-butyl-3-methylimidazolium tetrachloroferrate (Bmim[FeCl4]) and 1-ethyl-3-methylimidazolium tetrachloroferrate (Emim[FeCl4])) are used as a green solvent. Lignocellulose is a promising starting material for a plethora of products, ranging from biofuels to custom chemicals; however, lignocellulose is resistant to enzymatic degradation. Various biomass-preprocessing techniques such as microbial, mechanical, and chemical pretreatment are used for enhancing the digestibility of biomass to sugars for ethanol production. Varieties of ionic liquids have demonstrated the ability to fragment lignocellulose. However, after fragmentation, separation of biomass and ionic liquids …

Synthesis And Reactivity Of Hy Zeolite-Supported Rhodium Complexes, Artem D. Vityuk

Theses and Dissertations

The growing interest in the design of heterogeneous analogs of highly active and selective homogeneous catalysts prompted researchers to invest significant efforts in understanding of synthetic pathways, structure, and reactivity of supported single-site metal complexes. Synthesis of catalytically active organometallic species on solid supports with properties resembling those of their homogeneous counterparts could offer the opportunities to perform efficiently the solution organic reactions by utilizing flow instead of batch reactors. In this regard, rhodium carbonyl complexes and their derivatives are viewed as very attractive candidates for heterogenization due to their extensive application as catalysts for variety of industrially important reactions. …

Facile Fabrication Of Mesostructured Zn2sno4 Based Anode Materials For Reversible Lithium Ion Storage, Sai Karthik Karthik Addu

Wayne State University Theses

Increase in all electric and hybrid car sales from Electric drive transportation association show that Lithium-ion batteries stands as a promising option for these vehicles. Hence improving these batteries is the objective of this thesis. We try to improve the electrode material by using unique structures and coating carbon layers on the material.

We chose Zinc tin oxide (ZTO) as it has been shown in literature to be a good oxide for batteries. We tried improving it by making new Rubik-cube like microstructure of it and more interestingly coating a layer of carbon on it. We could show from our …

Electrochemical, Interfacial, And Surface Studies Of The Conversion Of Carbon Dioxide To Liquid Fuels On Tin Electrodes, Jingjie Wu

Theses and Dissertations

The electrochemical reduction of carbon dioxide (CO2) into liquid fuels especially coupling with the intermittent renewable electricity offers a promising means of storing electricity in chemical form, which reduces the dependence on fossil fuels and mitigates the negative impact of anthropogenic CO2 emissions on the planet. Although converting CO2 to fuels is not in itself a new concept, the field has not substantially advanced in the last 30 years primarily because of the challenge of discovery of structural electrocatalysts and the development of membrane architectures for efficient collection of reactants and separation of products. An efficient catalyst for the electrochemical …

Domain Engineering Of Physical Vapor Deposited Two-Dimensional Materials, Tarek Alam, Baoming Wang, Raghu Pulavarthy, M. Amanul Haque, Christopher Muratore, Nicholas R. Glavin, Ajit K. Roy, Andrey A. Voevodin

Chemical and Materials Engineering Faculty Publications

Physical vapor deposited two-dimensional (2D) materials span larger areas compared to exfoliated flakes, but suffer from very small grain or domain sizes. In this letter, we fabricate freestanding molybdenum disulfide (MoS2) and amorphous boron nitride (BN) specimens to expose both surfaces. We performed in situ heating in a transmission electron microscope to observe the domain restructuring in real time. The freestanding MoS2 specimens showed up to 100× increase in domain size, while the amorphous BN transformed in to polycrystalline hexagonal BN (h-BN) at temperatures around 600 °C much lower than the 850–1000 °C range cited in the literature.

Evaluation Of Ceramic Coaxial Cable Sensors For Long-Term In-Situ Monitoring Of Geologic Co₂ Injection And Storage, Yurong Li

Masters Theses

"Monitoring is an essential component of CO₂ injection and storage projects in order to manage the injection process, identify leakage risks, provide early failure warnings, determine the movement of CO₂ plume and provide input into reservoir models. In-situ monitoring provides critical and direct data points that can be used to fulfill the above objectives. However, downhole sensors that can withstand the harsh conditions and run over decades of the project life cycle remain unavailable. A new idea of ceramic coaxial cable temperature, pressure and strain sensor has recently been put forward and the sensors are under development.

A high pressure …

Numerical Simulations For Wellbore Stability And Integrity For Drilling And Completions, Nevan Christopher Himmelberg

Masters Theses

"Conventional wellbore trajectory planning is commonly based on an Andersonian state of stress [SoS] and the optimum well azimuth and inclination for a specific depth can be determined using stereographic projections of the safe mud weight window. In this thesis a new methodology using the complete stress tensor is developed to determine optimal well trajectories for complex in-situ stress scenarios. This study uses a 3D finite element analysis to simulate the SoS based on an integrated 3D MEM. The model yields the complete stress tensor at every location for a planned future well path. Using standard equations to determine the …

An Analytical Pressure Model To Guide Downhole Sensor Placement For Carbon Dioxide Sequestration Monitoring, Yilin Mao

Masters Theses

"Injecting CO₂ into saline aquifers is currently the most viable approach to mitigate global greenhouse gas effect. Various monitoring techniques are required to achieve 99% accuracy in determining the location of the injected CO₂ plume. Sensor locations are critical to the monitoring quality necessary to meet this requirement but have scarcely been discussed. The pressure profile needs to be modeled accurately at the initial stage of CO₂ injection to guide sensor locations. The objective of this thesis was to develop an analytical solution for CO₂ sequestration based on time and distance. This will guide the locations of downhole pressure sensors …

Techno-Economic And Life-Cycle Modeling And Analysis Of Various Energy Storage Technologies Coupled With A Solar Photovoltaic Array, Brian Andrew Peterson

Masters Theses

"Renewable energies, such as wind and solar, are a growing piece of global energy consumption. The chief motivation to develop renewable energy is two-fold: reducing carbon dioxide emissions and reducing dependence on diminishing fossil fuel supplies. Energy storage is critical to the growth of renewable energy because it allows for renewably-generated electricity to be consumed at times when renewable sources are unavailable, and it also enhances power quality (maintaining voltage and frequency) on an electric grid which becomes increasingly unstable as more renewable energy is added. There are numerous means of storing energy with different advantages, but none has emerged …

Investigation Of Cased Wellbore Integrity In The Wabamun Area Sequestration Project, Benjamin Lee Weideman

Masters Theses

"Loss of cased wellbore integrity can cause many significant problems, including lost production, aquifer contamination, blowouts, and other environmental damage. The objective of this study is to conduct an analysis of the Wabamun Area Sequestration Project (WASP) to determine if wells in that area are suitable for CO₂ sequestration. This was done by conducting laboratory experiments on the common cement compositions found in the area, simulating the various conditions possible in a wellbore, and by analyzing three case studies from the WASP. The cases include two existing production wells and a proposed injection well specifically designed for CO₂ sequestration. This …

Data Mining And Statistical Analysis Of Completions In The Canadian Montney Formation, Mustafa Adil Al-Alwani

Masters Theses

"This thesis documents a data-mining study and statistical analysis of well completion methods and their impact on production for more than 3300 horizontal wells in the Canadian Montney resource play.

The statistical software JMP is used to analyze well and production data for both horizontal Montney gas and oil wells, examining production trends with changes in completion parameters, such as the type of completion, fluid volume pumped, proppant load, number of fracture stages and completion costs. The analysis also provides a general understanding of average treatment characteristics, and how completions have changed with time for the Montney play.

Among the …

Influence Of Erosional Unloading On The State Of Stress For Low Amplitude Single-Layer Buckle Folds - Implications For Tensile Fracture Occurrence, Mengke Li

Masters Theses

"The existence of fractures associated to buckle folds is related to the strain distribution of the fold. The erosional unloading process can amplify the remnant strain in the folded layer. Two-dimensional plane strain Finite Element Analysis (FEA) is used to investigate the influence of the erosional unloading step on both the evolution of the state of stress and the associated failure patterns in low amplitude buckle folds. Sensitivity analyses on different input parameters, including viscosity, shortening ratio, and overburden pressure, are performed. Based on the simulation results, tensile stress can be initiated both in the crest and in the limb …

Performance Comparison Of Transverse And Longitudinal Fractured Horizontal Wells Over Varied Reservoir Permeability, Fen Yang

Masters Theses

"Since the first application in the mid-1980's, multiple fractured horizontal wells have proven to be an effective means of extracting hydrocarbons. These wells require careful consideration of wellbore orientation relative to the horizontal principle stress. Wellbore orientation can lead to transverse fractures which are perpendicular to the wellbore, or longitudinal fractures parallel the wellbore. Questions arise regarding whether one fracture orientation is consistently preferred over the other, or if certain conditions affect the choice.

Historical work has examined the impact of horizontal wellbore azimuth in the Barnett and Marcellus Shale where public data was reviewed and statistical well analysis was …

Effects Of Sodium Hydroxide Pretreatment On Structural Components Of Biomass, Alicia A. Modenbach, Sue E. Nokes

Biosystems and Agricultural Engineering Faculty Publications

Pretreatment is a unit operation in the conversion of biomass to valuable products that utilizes various combinations of conditions, including chemicals, heat, pressure, and time, to reduce the recalcitrance of lignocellulose. Many such pretreatments have been developed over the years, as the operating conditions can be adapted so that lignocellulose is modified in ways unique to each pretreatment. By tailoring pretreatment conditions to achieve these modifications, the types of final products produced can be controlled. The purpose of this review is to provide a consolidated source of information for sodium hydroxide effects on lignocellulose. The structural characteristics of lignocellulose and …

Rheological Signatures In Limit Cycle Behaviour Of Dilute, Active, Polar Liquid Crystalline Polymers In Steady Shear, M. Gregory Forest, Panon Phuworawong, Qi Wang, Ruhai Zhou

Mathematics & Statistics Faculty Publications

We consider the dilute regime of active suspensions of liquid crystalline polymers (LCPs), addressing issues motivated by our kinetic model and simulations in Forest et al. (Forest et al. 2013 Soft Matter 9, 5207-5222 (doi:10.1039/c3sm27736d)). In particular, we report unsteady two-dimensional heterogeneous flow-orientation attractors for pusher nanorod swimmers at dilute concentrations where passive LCP equilibria are isotropic. These numerical limit cycles are analogous to longwave (homogeneous) tumbling and kayaking limit cycles and two-dimensional heterogeneous unsteady attractors of passive LCPs in weak imposed shear, yet these states arise exclusively at semi-dilute concentrations where stable equilibria are nematic. The results in Forest …

Self-Healing Catalysts: Co3O4 Nanorods For Fischer-Tropsch Synthesis, Cun Wen, Darrius D. Dunbar, Xin Zhang, Jochen A. Lauterbach, Jason R. Hattrick-Simpers

Faculty Publications

We combine kinetic and spectroscopic data to demonstrate the concept of a self-healing catalyst, which effectively eliminates the need for catalyst regeneration. The observed self-healing is triggered by controlling the crystallographic orientation at the catalyst surface.

Development Of Cementitious Materials For Adhesion Type Applications Comprising Calcium Sulfoaluminate (Csa) Cement And Latex Polymer, Joshua V. Brien

Theses and Dissertations--Civil Engineering

The objective of this research was to develop high performing polymer modified calcium sulfoaluminate (CSA) cement materials for use in applications requiring superior adhesion characteristics. Little information is available describing interactions of CSA cement containing minor phase tri-calcium aluminate (C₃A) with commonly used admixtures. Given the scarcity of information, a basic approach for developing cementitious materials was followed. The basic approach consisted of four tasks: cement design, admixture design, polymer design and testing developed materials. The iterative, time consuming process is necessary for understanding the influence of specific constituent components on overall system behavior. Results from the cement …