Chemical Engineering Commons^™

Reflections On Mathematical Models And Simulation Of Gas-Particle Flows, Sankaran Sundaresan

10th International Conference on Circulating Fluidized Beds and Fluidization Technology - CFB-10

No abstract provided.

Gas Tracer Study In A Non Mechanical L-Valve, Mohammad-Mahdi Yazdanpanah, Ali Hoteit, Ann Forret, Thierry Gauthier, Arnaud Delebarre

10th International Conference on Circulating Fluidized Beds and Fluidization Technology - CFB-10

No abstract provided.

New System For The Continuous Removal Of Bio-Char From Bubbling Bed Pyrolyzers, Craig Mara, Lorenzo Ferrante, Franco Berruti, Cedric Briens

Bioenergy III: Present and New Perspectives on Biorefineries

No abstract provided.

Latest Developments On Application Of Heterogenous Basic Catalysts For An Efficient And Eco Friendly Synthesis Of Biodiesel: A Review, Yogesh C. Sharma, Bhaskar Singh, John Korstad

College of Science and Engineering Faculty Research and Scholarship

Heterogeneous catalysts are now being tried extensively for biodiesel synthesis. These catalysts are poised to play an important role and are perspective catalysts in future for biodiesel production at industrial level. The review deals with a comprehensive list of these heterogeneous catalysts which has been reported recently. The mechanisms of these catalysts in the transesterification reaction have been discussed. The conditions for the reaction and optimized parameters along with preparation of the catalyst, and their leaching aspects are discussed. The heterogeneous basic catalyst discussed in the review includes oxides of magnesium and calcium; hydrotalcite/layered double hydroxide; alumina; and zeolites. Yield …

Electrochemical Investigation Of Chromium Nanocarbide Coated Ti-6al-4v And Co-Cr-Mo Alloy Substrates, Viswanathan Swaminathan, Haitong Zeng, Daniel Lawrynowicz, Zongtao Zhang, Jeremy L. Gilbert

Biomedical and Chemical Engineering - All Scholarship

This study investigated the electrochemical behavior of chromium nano-carbide cermet coating applied on Ti–6Al–4V and Co–Cr–Mo alloys for potential application as wear and corrosion resistant bearing surfaces. The cermet coating consisted of a highly heterogeneous combination of carbides embedded in a metal matrix. The main factors studied were the effect of substrate (Ti–6Al–4V vs. Co–Cr–Mo), solution conditions (physiological vs. 1 M H₂O₂ of pH 2), time of immersion (1 vs. 24 h) and post coating treatments (passivation and gamma sterilization). The coatings were produced with high velocity oxygen fuel (HVOF) thermal spray technique at atmospheric conditions to …

Fluidized Bed Pyrolysis Of Lignin In A Bubbling Bed Reactor, Pietro Palmisano, Valentina Lago, Franco Berruti, Cedric Briens

Bioenergy III: Present and New Perspectives on Biorefineries

No abstract provided.

Meat And Bone Meal Pyrolysis Study In A Laboratory-Scale Bubbling Fluidized Bed Reactor, Federico M. Berruti, Lorenzo Ferrante, Cedric Briens, Franco Berruti

Bioenergy III: Present and New Perspectives on Biorefineries

No abstract provided.

Effects Of Biochar On Products Yields During Biomass Pyrolysis In A Bubbling Bed Reactor, Pietro Palmisano, Franco Berruti, Cedric Briens

Bioenergy III: Present and New Perspectives on Biorefineries

No abstract provided.

Advancements In Solid Acid Catalysts For Ecofriendly And Economically Viable Synthesis Of Biodiesel, Yogesh C. Sharma, Bhaskar Singh, John Korstad

College of Science and Engineering Faculty Research and Scholarship

Solid acid (heterogeneous) catalysts have a unique advantage in esterification and transesterification reactions which enhances the use of high acid value oil to be used as feedstock for synthesis of biodiesel. Various solid acid catalysts such as resins, tungstated and sulfated zirconia, polyaniline sulfate, heteropolyacid, metal complexes, sulfated tin oxide, zeolite, acidic ionic liquid, and others have been explored as potential heterogeneous catalysts. The activity of the catalyst differs slightly resulting in moderate to high conversion and yield. The reuse of the solid catalyst is governed by their deactivation, poisoning, and the extent of leaching in the reaction medium. The …

A Critical Review On Recent Methods Used For Economically Viable And Eco-Friendly Development Of Microalgae As A Potential Feedstock For Synthesis Of Biodiesel, Yogesh C. Sharma, Bhaskar Singh, John Korstad

College of Science and Engineering Faculty Research and Scholarship

Microalgae are being considered as a viable feedstock for large-scale production of biodiesel. However, though it may look simpler to obtain lipids from microalgae, the overall process of choosing an algal strain, cultivation, harvesting, dewatering, and extraction of oil is quite complicated and not economically prudent at this time. A thorough understanding of algae and the overall biodiesel production process discussed in this paper is vital so that focused research might lower the costs involved. Various diverse species of microalgae are currently being used as feedstocks for biofuel. Heterotrophic culture may be preferred over photoautotrophic cultivation. For cultivation, specially fabricated …

Modeling Diverse Physics Of Nanoparticle Self-Assembly In Pulsed Laser-Irradiated Metallic Films, Mikhail Khenner

Mathematics Faculty Publications

Presents physics behind dewetting of thin liquid films and mathematical/computational modeling tools (Educational/Research presentation for senior physics majors).

Stability Of A Strongly Anisotropic Thin Epitaxial Film In A Wetting Interaction With Elastic Substrate, Mikhail Khenner, Wondimu T. Tekalign, Margo S. Levine

Mathematics Faculty Publications

The linear dispersion relation for longwave surface perturbations, as derived by Levine et al. Phys. Rev. B 75, 205312 (2007) is extended to include a smooth surface energy anisotropy function with a variable anisotropy strength (from weak to strong, such that sharp corners and slightly curved facets occur on the corresponding Wulff shape). Through detailed parametric studies it is shown that a combination of a wetting interaction and strong anisotropy, and even a wetting interaction alone results in complicated linear stability characteristics of strained and unstrained films.

Stability Of A Strongly Anisotropic Thin Epitaxial Film In A Wetting Interaction With Elastic Substrate, Mikhail Khenner, Wondimu Tekalign, Margo Levine

Mathematics Faculty Publications

The linear dispersion relation for longwave surface perturbations, as derived by Levine et al. Phys. Rev. B 75, 205312 (2007) is extended to include a smooth surface energy anisotropy function with a variable anisotropy strength (from weak to strong, such that sharp corners and slightly curved facets occur on the corresponding Wulff shape). Through detailed parametric studies it is shown that a combination of a wetting interaction and strong anisotropy, and even a wetting interaction alone results in complicated linear stability characteristics of strained and unstrained films.

Computational Models Of Chemical Systems Inspired By Braess’ Paradox, Dante Lepore, Carl Barratt, Pauline Schwartz

Chemistry and Chemical Engineering Faculty Publications

Systems chemistry is a new discipline which investigates the interactions within a network of chemical reactions. We have studied several computational models of chemical systems inspired by mathematical paradoxes and have found that even simple systems may behave in a counterintuitive, non-linear manner depending upon various conditions. In the present study, we modeled a set of reactions inspired by one such paradox, Braess’ paradox, an interesting phenomenon whereby the introduction of additional capacity (e.g. pathways) in some simple network systems can lead to an unexpected reduction in the overall flow rate of “traffic” through the system. We devised several chemical …

Reinforced Chitosan-Based Heart Valve Scaffold And Utility Of Bone Marrow-Derived Mesenchymal Stem Cells For Cardiovascular Tissue Engineering, Mohammad Z. Albanna

Wayne State University Dissertations

Recent research has demonstrated a strong correlation between the differentiation profile of mesenchymal stem cells (MSCs) and scaffold stiffness. Chitosan is being widely studied for tissue engineering applications due to its biocompatibility and biodegradability. However, its use in load-bearing applications is limited due to moderate to low mechanical properties. In this study, we investigated the effectiveness of a fiber reinforcement method for enhancing the mechanical properties of chitosan scaffolds. Chitosan fibers were fabricated using a solution extrusion and neutralization method and incorporated into porous chitosan scaffolds. The effects of different fiber/scaffold mass ratios, fiber mechanical properties and fiber lengths on …

Methodological Study On Technology Integration For Sustainable Manufacturing In The Surface Finishing Industry, Tamer Girgis

Wayne State University Dissertations

Today, industries explore advanced techniques to enhance their development efforts to meet the goals of sustainability due to various challenges which is caused by industrial globalization, high energy and raw material costs, increased environmental regulations and social pressures, and new technological innovations. In order for an industrial process to become sustainable, it is essential to improve the process inputs efficiency from raw materials and energy while maintaining highest productivity and quality; in addition to, minimizing waste generation and the impact on the environment. Engaging in industrial sustainability requires major efforts from decision makers to implement advanced technologies to satisfy each …

Impact Of Porogens On The Pore Characteristics Of Zirconia Particles Made By Polymer-Induced Colloid Aggregation, Abhinandan Pattanayak, Anuradha Subramanian

Anuradha Subramanian Publications

Zirconia particles were prepared from a 20% colloidal sol (ZrO₂) by the polymer-induced colloid aggregation (PICA) process, both in the presence and absence of porogens. Specifically, porous zirconia particles having varying porosity were prepared by a two-step protocol wherein a porogen was first embedded during the particle synthesis, followed by its removal in a subsequent step. In this research study, the ability of four different types of porogens, viz. fumed silica, micronized high molecular weight polyethylene emulsion ME09730, and microcrystalline waxes ME48040M2 and ME98040M1, to impact the pore size, porosity, and pore area were investigated. Particle morphology and …

Hydration Repulsion Effects Of The Formation Of Supported Lipid Bylayers, Selver Ahmed, Rajesh Raman Madathingal, Stephanie L. Wunder, Yanjing Chen, Geoffrey D. Bothun

Chemical, Biomolecular, and Materials Engineering Faculty Publications

When zwitterionic lipids fuse onto substrates such as silica (SiO₂), the water of hydration between the two approaching surfaces must be removed, giving rise to an effective hydration repulsion. Removal of water around the polar headgroups of the lipid and the silanols (SiOH) of SiO₂ allows supported lipid bilayer (SLB) formation, although an interstitial water layer remains between the lipid and surface. The importance of hydration repulsion in SLB formation is demonstrated by monitoring fusion of zwitterionic lipids onto silica (SiO2) nanoparticles heat treated to control the silanol group (SiOH) density and thus the amount of bound …

Multicomponent Folate-Targeted Magnetoliposomes: Design, Characterization, And Cellular Uptake, Geoffrey D. Bothun, Alline Lelis, Yanjing Chen, Kyle Scully, Linnea E. Anderson, Matthew A. Stoner

Chemical, Biomolecular, and Materials Engineering Faculty Publications

Folate-targeted cationic magnetoliposomes (FTMLs) have been prepared with coencapsulated doxorubicin (DOX) and anionic superparamagnetic iron oxide (SPIO) nanoparticles (NPs) with 5 nm γ-Fe₂O₃ cores and 16 nm hydrodynamic diameters. NP encapsulation (89%) was confirmed by cryogenic transmission electron microscopy (TEM), and the presence of the oppositely charged NPs did not cause liposome aggregation. The FTMLs had an average diameter of 174 ± 53 nm and existed as unilamellar and cup-shaped liposomes, which was attributed to dissimilar lipid packing parameters and the presence of PEG-lipids. A 3-fold increase in DOX release was achieved over 2 hours when the …

A Novel Biodiesel And Glycerol Carbonate Production Plant, Nghi T. Nguyen, Yaşar Demirel

Yaşar Demirel Publications

Crude glycerol is the byproduct of biodiesel production plant and the economic value of glycerol may affect the profitability of the biodiesel production plant. As the production rate of bioglycerol increases, its market values drop considerably. Therefore, conversion of bioglycerol into value-added products can reduce the overall cost, hence, leading to a more economical biodiesel production plant. In a direct carboxylation reaction, CO₂ reacts with glycerol to produce glycerol carbonate and water. This study presents a direct comparison of the economic analysis of the conventional biodiesel production plant and the possible next generation biodiesel-glycerol carbonate production plant. At the …

Using Thermally Coupled Reactive Distillation Columns In Biodiesel Production, Nghi Nguyen, Yaşar Demirel

Yaşar Demirel Publications

Production of ethyl dodecanoate (biodiesel) using lauric acid and methanol with a solid acid catalyst of sulfated zirconia is studied by using two distillation sequences. In the first sequence, the methanol recovery column follows the reactive distillation column. In the second sequence, the reactive distillation and methanol recovery columns are thermally coupled. Thermally coupled distillation sequences may consume less energy by allowing interconnecting vapor and liquid streams between the two columns to elminate reboiler or condenser or both. Here we study the thermally coupled side-stripper reactive distillation and eliminate the condenser of the reactive distillation column. Both the sequences are …

Investigation Of Microbubble/Droplet Formation In Cross-Flow And Co-Flow Micro Devices, Tom J. John

Doctoral Dissertations

The primary goal of the work presented in this dissertation is to generate microbubbles of a diameter of less than 15μm inside micro channels. In order to achieve this detailed understanding, the facts and limitations behind the generation of microbubbles inside a micro channel are determined from existing literature. The major limitations of the current bubble/droplet generators are found to be the bubble confinement effect, the merging of bubbles, the difficulty in determining bubble diameter and the need for smaller channels to generate smaller bubbles. A device eliminating these drawbacks is conceptualized, and its feasibility is studied using COMSOL® and …

The Impact Of Driving Conditions On Phev Battery Performance, Nathan Christensen, John Patten, Steven Srivastava, Gary P. Nola

Green Manufacturing Research Journal

The battery performance of a modified Prius with a 5 kWh plug-in battery was documented for a year to determine the impact of environmental conditions and user attributes on vehicle performance.  Both fuel economy and pure electrical efficiency were compared to ambient temperature.  The fuel economy has a positive relationship with ambient temperature until approximately 70˚F where the efficiency begins to drop.  Electrical performance has a positive linear relationship with ambient temperature.  With the emergence of electric vehicles (EVs) and PHEVs from a variety of automotive manufacturers, information on EV and PHEV performance for consumers will become more important.

Pyrolysis Kinetics Of A Green River Oil Shale Using A Pressurized Tga, James L. Hillier, Thomas H. Fletcher

Faculty Publications

Crushed samples of Green River Oil Shale and its kerogen extract were pyrolyzed at heating rates from 1 to 10 K/min at pressures of 1 and 40 bar and temperatures up to 1000 C. Two to four mass release peaks were observed with the major two corresponding to kerogen pyrolysis and carbonate decomposition. The transient pyrolysis data were fit with a first-order model and a Distributed Activation Energy Model (DAEM). An F-test was used to determine confidence regions and compare the kinetic parameters among the oil shale and demineralized samples, between the two pressure levels, and between the models. The …

Diffuse-Charge Dynamics Of Ionic Liquids In Electrochemical Systems, Hui Zhao

Mechanical Engineering Faculty Research

We employ a continuum theory of solvent-free ionic liquids accounting for both short-range electrostatic correlations and steric effects (finite ion size) [Bazant et al., Phys. Rev. Lett. 106, 046102 (2011)] to study the response of a model microelectrochemical cell to a step voltage. The model problem consists of a 1-1 symmetric ionic liquid between two parallel blocking electrodes, neglecting any transverse transport phenomena. Matched asymptotic expansions in the limit of thin double layers are applied to analyze the resulting one-dimensional equations and study the overall charge-time relation in the weakly nonlinear regime. One important conclusion is that our …

Thermoelectric Properties Of ZnXInYOX+1.5y Films, Otto J. Gregory, Matin Amani

Chemical, Biomolecular, and Materials Engineering Faculty Publications

Ceramic thin film thermocouples are being developed to replace noble metal thermocouples operating within the harsh environments of advanced turbine engines used for power generation and propulsion. Seebeck coefficients as large as 158 V/°C were determined for indium oxide (In₂O₃) at 950°C and 256 V/°C for zinc oxide ZnO at 1250°C relative to platinum reference electrodes. Because these Seebeck coefficients are appreciably larger than those for metallic thermocouples, alloys in the system indium zinc oxide Zn_xIn_yO_x+1.5y were investigated by cosputtering from high purity ZnO and In₂O₃ targets. Thermocouple …

Co2 Adsorption On Solid Sorbents, Bingyu Li

Electronic Theses and Dissertations

Sorbent-based CO2 capture technology is considered as one of the potential scientific techniques for mitigating greenhouse gas emission. Major advantages of sorbent based adsorption are its low regeneration energy coupled with the elimination of corrosion and equipment degradation characteristic of amine based solvent CO2 capture systems which are the preferred industrial methods. Different CO2 capture configurations, processes, and operational parameters for different sorbents were revieand summarized. Efficient industrial applications for CO2 capture require that solid sorbents possess an adsorption capacity between 1000-2000µmol/g or more together with a long-term regeneration capacity. Economical consideration necessitates that the cost of CO2 sequestration be …

Fourier Transform Emission Spectroscopy Of Yh And Yd: Observation Of New A¹Δ And B¹Π Electronic States, R. S. Ram, G. Li, P. F. Bernath

Chemistry & Biochemistry Faculty Publications

The emission spectra of YH and YD molecules have been investigated in the 3600–12 000 cm⁻¹ region using a Fourier transform spectrometer. Molecules were formed in an yttrium hollow cathode lamp operated with a continuous flow of a mixture of Ne and Ar gases, and YH and YD were observed together in the same spectra. A group of bands observed near 1 μm have been identified as 0-0 and 1-1 bands of the A¹Δ-X¹Σ⁺ and B¹Π-X¹Σ⁺ transitions of YH and the 0-0 bands of the same two transitions …

Understanding And Improving Lithium Ion Batteries Through Mathematical Modeling And Experiments, Rutooj D. Deshpande

Theses and Dissertations--Chemical and Materials Engineering

There is an intense, worldwide effort to develop durable lithium ion batteries with high energy and power densities for a wide range of applications, including electric and hybrid electric vehicles. For improvement of battery technology understanding the capacity fading mechanism in batteries is of utmost importance. Novel electrode material and improved electrode designs are needed for high energy- high power batteries with less capacity fading. Furthermore, for applications such as automotive applications, precise cycle-life prediction of batteries is necessary.

One of the critical challenges in advancing lithium ion battery technologies is fracture and decrepitation of the electrodes as a result …

Mathematical Modeling Of Clostridium Thermocellum’S Metabolic Responses To Environmental Perturbation, Bless Adotey

Theses and Dissertations--Biosystems and Agricultural Engineering

Clostridium thermocellum is a thermophilic anaerobe that is capable of producing ethanol directly from lignocellulosic compounds, however this organism suffers from low ethanol tolerance and low ethanol yields. In vivo mathematical modeling studies based on steady state traditional metabolic flux analysis, metabolic control analysis, transient and steady states’ flux spectrum analysis (FSA) were conducted on C. thermocellum’s central metabolism. The models were developed in Matrix Laboratory software ( MATLAB^® (The Language of Technical Computing), R2008b, Version 7.7.0.471)) based on known stoichiometry from C. thermocellum pathway and known physical constraints. Growth on cellobiose from Metabolic flux analysis (MFA) and Metabolic …