Chemical Engineering Commons^™

The Effects Of Corrosive Chemicals On Corrosion Rate Of Steel Reinforcement Bars: Ii. Swamp Sludges, Henki W. Ashadi, Sulistyoweni Widanarko, Irma Gusniani

Makara Journal of Technology

A polluted environment will influence the building age. The objective of this research was to find out the influence of corrosive chemicals within the sludge swamp area with the corrosion rate of steel concrete. Corrosion in steel concrete usually occur in acid area which contain of SO4 2-, Cl- and NO3 -. The research treatment used by emerging ST 37 and ST 60 within 60 days in ‘polluted’ sludge swamp area. Three variation of ‘polluted’ swamp sludge were made by increasing the concentration a corrosive unsure up to 1X, 5X and 10X. The corrosion rate measured by using an Immersion …

The Effect Of Ca Content On Cao-Zeolite On Nitrogen Adsorption Capacity, Mohammad Nasikin, Tania Surya Utami, Agustina Tp Siahaan

Makara Journal of Technology

In industry, Ca zeolite is used as nitrogen selective adsorbent with the use of PSA (Pressure Swing Adsorption)/VSA (Vacuum Swing Adsorption) methods. Natural zeolite modified to be Cao-zeolite by ion exchange process using Ca(OH)2. Adsorption test was done on CaO-zeolite with different Ca concentration to understand how it’s adsorption phenomena on oxygen and nitrogen. Adsorption test has been done for CaO-zeolite with Ca concentration = 0,682%, 0,849% and 1,244% to oxygen and nitrogen with equal concentration seperately. Pressure variation has being done three times (5 minutes long each time) adsorption time to analyze the connection between adsorption time and how …

Cetane Number Booster Additive For Diesel Fuel Synthesized From Coconut Oil, Mohammad Nasikin, Rita Arbianti, Abdul Azis

Makara Journal of Technology

To reduce NOx, SOx, HC, and particulates that produce because of using diesel fuel, can be done by increasing cetane number. One of methods is adding an additive to diesel fuel. 2-Ethyl Hexyl Nitrate (2-EHN) is a commercial additive that an organic nitrate. Making an additive in this research is used palm oil by nitration reaction that used HNO3 and H2SO4. Result of this reaction is methyl ester nitrate that has a structure looks like 2-EHN. IR spectra from research show that methyl ester nitrate is indicated by spectrum NO2 at 1635 cm-1. This result show that methyl ester nitrate …

Analogy Method Development For Cost Estimation Of Software Design, Riyanarto Sarno, Joko Lianto Buliali, Siti Maimunah

Makara Journal of Technology

The important aspect of planning and managing software development project is to estimate the cost of a project. There are several methods for estimating the cost of a software development project, and the Analogy method is a method which gives relatively better estimates. This paper shows that the modified Analogy method selects a closer project reference, estimates more accurate project effort and cost. This study enhances the cost estimate technique by including valid and complete cost parameters, therefore the estimate of a project cost is better than the result of the standard Analogy method.

The Role Of Si3n4 Amorphous Phase In Nc-Tin/A-Si3n4 Nanocomposites In Increases The Hardness And Thermal Stability, Keba Moto

Makara Journal of Technology

The role of Si3N4 amorphous phase in nc-TiN/a-Si3N4 nanocomposites will be shown and compared with polycrystalline ZrN/Ni which has no such amorphous phase (non-composites). The presence of amorphous phase Si3N4 increases the hardness of film as well as the toughness of the bulk nanocomposites under indentation load. It has been observed that nc-TiN/a-Si3N4 nanocomposites films has higher thermal stability than ZrN/Ni polycrystalline films.

Biodiesel's Characteristics Preparation From Palm Oil, Tilani Hamid. S, Rachman Yusuf

Makara Journal of Technology

Biodiesel’s characteristics preparation from palm oil. Using vegetable oils directly as an alternative diesel fuel has presented engine problems. The problems have been attributed to high viscosity of vegetable oil that causes the poor atomization of fuel in the injector system and pruduces uncomplete combustion. Therefore, it is necessary to convert the vegetable oil into ester (metil ester) by tranesterification process to decrease its viscosity. In this research has made biodiesel by reaction of palm oil and methanol using lye (NaOH) as catalyst with operation conditions: constant temperature at 60 oC in atmosferic pressure, palm oil : methanol volume ratio …

Development Of Hardness Measurement Procedure For Nanocomposite Nc-Tin/A-Si3n4, Keba Moto

Makara Journal of Technology

Hardness of nc-TiN/a-Si3N4 nanocomposites which was determined by using two methods of measurements i. e. depth sensing method and remaining plastic indentation area that were magnified by using SEM (Scanning Electron Microscope) lie in the good agreement. The hardness value is not influenced by the biaxial and residual compressive stress. The measurement of the biaxial stress on the substrate shows a very small value of biaxial stress as well as the constant hardness and crystallite size against annealing temperature. Therefore, the reported hardness value here is the intrinsic value that depend on its microstructure properties.

Modeling And Simulation Of The Chemical Etching Process In Niobium Cavities, Qin Xue

UNLV Theses, Dissertations, Professional Papers, and Capstones

Niobium Cavities are important parts of the integrated NC/SC high-power linear accelerator (linac) that can accelerate over 100 mA of protons to several GeV. Surface finish of the niobium cavity plays an important role of achieving the best performance of niobium cavity. The chemical etching techniques have been widely used.

Chemical etching of the inner surface of the cavity is achieved by circulating acid through it. The acid interacts with the surface and eliminates imperfections. During the etching process, a pipe with baffles is inserted within the cavity to direct the flow along the surfaces.

A 2-D, axisymmetric, steady state, …

Design And Analysis For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides, Xiaolong Wu

UNLV Theses, Dissertations, Professional Papers, and Capstones

Fundamental issues related to the selection of a metallic fuel casting furnace design are presented and discussed including heating mechanisms, casting issues, crucible design, and issues related to the mass transport of americium. The process of evaluating all of these different criteria is undertaken to select a concept that would have the greatest chance of success for casting americium in a metallic fuel rod. Based on this evaluation process, a concept for the casting of metallic fuel pins containing high vapor pressure materials is selected and discussed. The important physics of this concept include mass transport of americium from the …

Poly (1-Trimethysilyl-1-Propyne) Membrane Regeneration Process, Andrei G. Fadeev, Michael M. Meagher

Department of Chemical and Biomolecular Engineering: Faculty Publications

A novel process for the regeneration of PTMSP membranes is disclosed. The regeneration process includes washing a fouled PTMSP membrane with a solution containing at least about 50% butanol in water for a time sufficient to increase the flux and/or selectivity of the membrane. This regeneration process with a butanol containing solution significantly improves both the flux and selectivity of the PTMSP membrane and can regenerate the flux of the PTMSP membrane to the level of a previously unused membrane.

Fluoride Release From Model Glass Ionomer Cements, A. Guida, R. G. Hill, Mark R. Towler, S. Eramo

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glass ionomer cements (GICs) are an important class of biomedical material used extensively for color matched mercury free, dental restorations. GICs can release clinically beneficial amounts of fluoride and have acceptable handling properties which make them suitable as dental restoratives. The fluoride release of model GICs produced from specially synthesized fluoro-alumino-silicate glasses was studied. Nine glasses of varying fluoride content based on 4.5SiO₂-3Al₂O₃-1.5P₂O₅-(5-Z)CaO-ZCaF₂ were synthesized, and cement disks were prepared from them. The glass transition temperature reduced with increasing fluorine content of the glass. Fluoride ion release was measured …

A Preliminary Study Of An Aluminum-Free Glass Polyalkenoate Cement, Mark R. Towler, C. M. Crowley, D. Murphy, A. M.C. O'Callaghan

Chemical and Biochemical Engineering Faculty Research & Creative Works

No abstract provided.

Evaluation Of Corrosion Inhibitor On Pre-Corroded Carbon Steel In Co2 Medium By Impedance Spectroscopy, Joseph Buchweishaija

Tanzania Journal of Engineering and Technology (TJET)

The effect of pre-corrosion of carbon steel on the performance of a commercial amine based fatty acid corrosion inhibitor, KI384, was investigated in formation water solutions saturated with CO₂ using electrochemical impedance spectroscopy (EIS) measurements. The investigation was performed at constant partial pressure of CO₂ using an autoclave system with Rotating Cylinder Electrodes (RCE). Carbon steel was pre-corroded for periods up to 7 days at 35 and 80 °C in the test solution prior to inhibitor injection. The results showed that when KI384 was applied on non-corroded carbon steel specimen, high inhibitor performance (99.8 %) was achieved independent of temperature. …

Comparative Analysis Of H₂S Removal Ability Of Different Calcium-Based Absorbents Under Coal Gasification Conditions, Hassan Katalambula

Tanzania Journal of Engineering and Technology (TJET)

Calcium-based sorbents, such as limestone and dolomite are viable candidates for capturing pollutants in an in-situ coal gasification/desulphurisation process. Recently, scallop shell is also used as a Ca-based sorbent. However, the ability in capturing pollutants varies from one type to another and it also depends on the process involved. In this study, two types of limestone, scallop shell and dolomite were characterized and studied for H₂S absorption ability under the coal gasification conditions. The characterizations were done using Scanning Electron Microscope (SEM), X-ray Diffraction (XRD), Thermal analysis and Surface Area analysis. All of the samples showed a porous structure, and …

A Device For Surface Study Of Confined Micron Thin Films In A Total Internal Reflection Geometry, Sergey Mamedov, Alexander D. Schwab, Ali Dhinojwala

College of Polymer Science and Polymer Engineering

A device to probe the molecular structure of materials next to a solid interface in a thin film geometry has been developed. The device can produce controlled thicknesses as small as 1 mum with parallelity better than 0.003degrees. We have shown that the thickness and the parallelity of the film produced between two optical surfaces can be quantified using white light and monochromatic light interferometry, respectively. In addition, this apparatus allows the study of these films in a static state or under shear using spectroscopic techniques involving transmission or reflection measurements. (C) 2002 American Institute of Physics.

Nano-Devices Using Block-Copolymers, Ravi F. Saraf

Department of Chemical and Biomolecular Engineering: Patents

A structure including a substrate. A first electrode and a second electrode are arranged spaced apart from each other on the substrate. A polymer string is positioned on the substrate between the two electrodes, the polymer line has a width of less than about 50 nm.

Remote Magneto-Elastic Analyte, Viscosity And Temperature Sensing Apparatus And Associated Methods Of Sensing, Craig A. Grimes, Plamen G. Stoyanov

Chemical and Materials Engineering Faculty Patents

An analyte, viscosity, or temperature sensing apparatus for operative arrangement within a time-varying magnetic field, including a sensor with an outer surface that is chemically, frictionally, or thermally responsive and adhered to a base magnetostrictive element, and a receiver to measure a first and second value for magneto-elastic emission intensity of the sensor taken at, respectively, a first and second interrogation frequency. A change in mass or a change in material stiffness of the sensor due to the responsiveness, the viscosity and mass density of a fluid therearound, or the temperature, can be identified. The receiver, alternatively, measures a plurality …

Low Salinity Flooding In A Selected Carbonate Reservoir: Experimental Approach, Mohamed Yehia Mohamed Mahmoud

Theses

Low-salinity water flooding LoSal^TM has been used to improve oil recovery for many decades. Historically, the mechanisms behind this improvement in oil recovery were attributed to the pressure maintenance and displacement of oil by injected water, i.e. physical mechanism. Recently, evidence from laboratory and field tests indicated that water flooding also involves chemical processes and that modifying of the injection brine salinity and its ionic composition can significantly impact the oil recovery. Several theories regarding the mechanism of LoSal^TM flooding have been discussed in the literature. These include interfacial tension reduction, wettability alteration (cation exchange), change in pH …

Development Of A Model For Induction Heating, Randy Clarksean, Yitung Chen

Fuels Campaign (TRP)

There are two coupled equations that must be solved in order to determine the power deposition. The numerical solution of these equations is needed in order to apply a source term within the energy equations. These equations have previously solved in FIDAP. That implementation used modified versions of the momentum and energy equations to provide a mechanism for the solution of two coupled equations. Currently, we want to solve for the induction heating field in addition to the flow field and the energy equation. In order to do this, a mechanism has to be defined within FIDAP to solve these …

The Development Of H Homogeneous Nucleation Rate Model For Thermoplastic Foams Based On A Molecular Partition Function And Fickian Diffusion, Ronald G. Gabbard

Dissertations

An improved homogeneous nucleation rate model for thermoplastic foams has been developed. This model does not rely on experimentally determined parameters and only uses pure component physical property data and a binary diffusion coefficient. This model, like those derived from classical nucleation theory, is made up of two parts, one that determines the size of the energy barrier in the nucleation process and one that estimates the forward rate of the process. A statistical-mechanical approach was used to create an energy term that is based on a molecular partition function. In this approach, the bulk phase (polymer and blowing, agent …

Process Control Of A Laboratory Combustor Using Neural Networks, Thana Slanvetpan

Dissertations

Active feedback and feedforward-feedback control systems based on static-trained feedforward multi-layer-perceptron (FMLP) neural networks were designed and demonstrated, by experiment and simulation, for selected species from a laboratory two stage combustor. These virtual controllers functioned through a Visual Basic platform. A proportional neural network controller (PNNC) was developed for a monotonic control problem - the variation of outlet oxygen level with overall equivalence ratio (Φ₀). The FMLP neural network maps the control variable to the manipulated variable. This information is in turn transferred to a proportional controller, through the variable control bias value. The proposed feedback control methodology …

Absorption Of Co2 Through Hollow Fiber Membranes Using Aqueous Solutions Of Various Absorbents, Praveen Babu Kosaraju

Theses

Absorption behavior of CO₂ was studied in different hollow fiber membrane modules fabricated using Celgard (polypropylene) and poly(4-methylpentene-1) microporous hollow fibers. Pure water, aqueous solutions of poly(amidoamine) (PAMAM) dendrimer of generation zero and monoethanolamine (MEA) were used as the absorbent; the absorbent solution flowed through the fiber bore, the gas mixture of C02 and N2 flowed countercurrently on the shell side. The system consisted of absorption in one module and stripping with Helium in another module of the same fibers. The absorption characteristics of the dendrimer solution and the MEA solution were studied in the modules built of Celgard …

Dry Particle Coating And Granulation In Rotating Fluidized Beds, Madhuri Kolli

Theses

The practicability of using rotating fluidized bed as dry particle coater and granulator is investigated in this study. Dry particle coating, in which fine guest particles are coated onto bigger host particles in the absence of binders or solvents, is studied for various systems of host and guest particles. Coating results are explained by considering the collisions between the host and guest particles and among themselves. Balance between collisional energy and adhesion energy is suggested to be the limiting condition for the adhesion and hence the coating of guest particles onto host particles. It is observed that the experimental and …

Magnetoelastic Sensing Apparatus And Method For Remote Pressure Query Of An Environment, Craig A. Grimes, Plamen G. Stoyanov, Dimitris Kouzoudis

Chemical and Materials Engineering Faculty Patents

A pressure sensing apparatus for operative arrangement within an environment, having: a sensor comprising a hermetically-sealed receptacle, at least one side of which has an flexible membrane to which a magnetically hard element is attached. Enclosed within the receptacle is a magnetostrictive element that vibrates in response to a time-varying magnetic field. Also included is a receiver to measure a plurality of successive values for magneto-elastic emission intensity of the sensor taken over an operating range of successive interrogation frequencies to identify a resonant frequency value for the sensor. Additional features include: (a) the magnetically hard element may be adhered …

Electrosynthesis Of Glyoxylic Acid In A Cooled Cathode Reactor, Jin-Hong Fan, Jun Li, Xue-Yun Chen, Wei Li, Hao-Qi Gao

Journal of Electrochemistry

Glyoxylic acid was produced by electroreduction of oxalic acid in a well designed cooled cathode reactor. The cathodic and anodic electrolytes were super-saturated oxalic acid and hydrochloric acid aqueous solutions separated by a super-acid ion-exchange membrane. The current efficiency and time-space yield of glyoxylic acid were studied under different temperatures of cathode and electrolyte, current densities, materials of cathode. With the cooled cathode reactor, the energy consumption was reduced and higher oxalic acid concentration was available in solution, so that current efficiency was improved. The results indicated that the average time-space yield of glyoxylic acid was about 0.032 kg·dm^{-3 …}

Development Of 200～500 W Portable Proton Exchange Membrane Fuel Cell Power System, Li-Qing Hu, Li-Rong Zhou, Zheng Li, Jian-Wei Xia, Ming-Zhu Fu, Xin Wu, Yun Zhu

Journal of Electrochemistry

The Properties of the Portable PEM Fuel Cell Power Source are very unique compared with the common primary or rechargeable electro-chemical battery. This paper describes the In this work, of the 200～500 W portable PEM fuel cell power system, was developed. The system mainly composed of four subsystem: 1)Fuel cell stack; 2)Air delivery; 3)Hydrogen source; 4)Heat dissipation and system control.

Electrocatalytic Oxidation Of Formaldehyde On The Proline Film Modified Electrode, Yu-Rong Ma, Qiu-Xia Yang, Guo-Bao Li, Zheng-Kai Xi, Xue-Lin Wang

Journal of Electrochemistry

The proline film modified electrode and its electrochemical behavior was studied by cyclic voltammetry and spectroelectrochemistry. After incorporation of Ni(Ⅱ), the cyclic voltammograms of the proline Ni(Ⅱ) film electrode exhibited a typical redox peak, which appeared at potential of 0.52 V anodic and 0.44 V cathodic in NaOH. The formal potentials E' were linearly dependent on the pH, and the peak currents ip were linearly dependent on the square root of the scan rates, thus charge transfer in the film was controlled by diffusion. The diffusion coefficient is figured out to be 2×10^_-10 cm²·s^-1. The …

Preparation,Structure And Properties Of Electrochromic Rhodium Oxide Films, Hai-Hong Wang, Tao Wang, Man-Ming Yan, Zhi-Yu Jiang

Journal of Electrochemistry

Electrochromic rhodium oxide films were prepared on ITO substrate by sol-gel method. The films exhibited reversible two-color (bright yellow at reduction and dark green at oxidation) electrochromic behavior in alkaline solution with good cycle stability. In-situ XRD, TGA-DTA, IR, XPS methods were used for studying the structure and chemical process of the films. The diffusion coefficient during the electrochromic process was measured by electrochemical impedance spectra method. It was found that the rhodium oxide films may be suitable for the use in electrochromic devices.

Syntheses And Photoluminescence Of Zinc Oxide Polyaniline Coaxial Nanowires And Their Array, Zhi-Xin Zheng, Yan-Yan Xi, Ping Dong, Huai-Guo Huang, Jian-Zhang Zhou, Lin-Lin Wu, Zhong-Hua Lin

Journal of Electrochemistry

A novel nanomaterial, zinc oxide (ZnO) and polyaniline (PANI) coaxial nanowires and their array in the template, was synthesized using anodic aluminum oxide (AAO) membrane as template. The morphology of these coaxial nanowires was observed with transmission electron microscope (TEM). The experiments on photoluminescence (PL) of coaxial nanowires and their array in AAO membrane show that the visible emission band of ZnO shifts from 530 nm to 400 nm and the luminescence is enhanced for the coaxial nanowires array in AAO membrane,and the visible emission band shifts to a lower wavelergth (385 nm) for coatial nanowires in NaOH solution. Possible …

Electrochemical Properties Of Mixed Metal Oxide Coated Titanium Anodes In Seawater, Ting-Yong Wang, Li-Kun Xu, Guang-Zhang Chen

Journal of Electrochemistry

Mixed metal oxide coated titanium anodes prepared by thermal decomposition were characterized by scanning electron microscopy and electrochemical measurement, while the consumption rate of an anode was also measured in seawater. In order to examine the practical performances of mixed metal oxide-coated anodes, a simulating test on floating dock in seawater has also been carried out. The SEM results indicate that oxide layers exhibited a cracked-mud morphology which endows the anode with good electrocatalytic activity. The electrochemical measurements showed that mixed metal oxide-coated anodes exhibit excellent electrochemical activity and electrochemical stability in seawater. Owing to good corrosion resistance and low …