Chemical Engineering Commons^™

Dynamic Simulation Of A Solar Powered Hybrid Sulfur Process For Hydrogen Production, Satwick Boddu

Theses and Dissertations

The Hybrid Sulfur process is a thermo-electrochemical cycle used to produce hydrogen from water. The process requires a high temperature energy source for H2SO4 decomposition with temperature reaching 800°C. This step is followed by SO2 - depolarized water electrolysis. Using solar energy as the high temperature energy source allows for efficient environmentally friendly production of hydrogen. This method is an alternative to traditional photovoltaic electrolysis for hydrogen production. Making the process economically competitive is a major challenge. Operating the process with changes in the availability of solar energy also increases process complexity. The dependence of the process on solar energy …

Three-Way Catalysts In Passive Selective Catalytic Reduction Systems, Calvin Thomas

Theses and Dissertations

Conventional gasoline-powered engines operate with a stoichiometric air-fuel ratio (AFR), but greater fuel economy is achieved in lean burn engines by increasing the AFR. The primary drawback to these engines is the nitrogen oxide (NOX) emissions, which cannot be reduced over a conventional three-way catalyst (TWC). Passive selective catalytic reduction (SCR) is a promising approach for the control of NOX emissions in lean burn systems. By periodically decreasing the AFR to fuel-rich levels, ammonia (NH3) can be produced over a TWC and stored on a downstream SCR catalyst for the reduction of NOX during normal lean operation. While passive SCR …

Nox Formation In Syngas/Air Combustion, Nazli Asgari

Theses and Dissertations

Syngas is a reliable energy source derived from the gasification of coal and other solid fuels. The feedstock type and the production process of syngas can affect the composition of syngas. Gas turbines utilizing high hydrogen content (HHC) fuels like syngas for power generation applications need to meet stringent pollutant emission standards, particularly with respect to nitrogen oxides (NOx). For gas turbine conditions, reliable experimental data, especially at high-pressure, is necessary for both generating accurate NOx prediction models and improving reaction pathways regarding the NOx chemistry. In this study, NOx formation in post-flame gases of syngas combustion at different conditions …

Stabilization Of Silicon And Germanium Based High Capacity Anodes For Lithium Ion Batteries, Kuber Mishra

Theses and Dissertations

Lithium-ion batteries (LIBs) have been the driver of the widespread application of portable electronics. As the electronic devices have been more powerful and versatile, the pressing demand for higher energy density batteries have led the extensive explorations of novel materials for high capacity electrodes. Despite several breakthroughs in literature, the current state of art LIBs still uses the battery chemistry developed in early 1990s.The keys challenges for switching to other high capacity electrodes have been high cost, non-linear scalability and poorer electrochemical performance. This dissertation focusses on development of high capacity electrodes in order to increase the energy density of …

Fundamental Aspects Of A Novel Technology For Abatement Of Indoor Allergens, Odell Lendor Glenn Jr.

Theses and Dissertations

The overall goal of this research was to develop a novel approach to reduce the potency of certain asthma triggers, namely, proteins produced by pests or pets in indoor environments. The broad hypothesis of the research was that naturally occurring essential oils will demonstrate enhanced denaturing ability. In any indoor environment, allergens are bound to dry dust particles. In this work, the effectiveness of using dry ice and CO2 with potential for essential oils on dry allergenic proteins through CFD modeling and ELISA methods were evaluated.

There are three objectives central to this work. The first objective was to apply …

Graphene As A Solid-State Ligand For Palladium Catalyzed Cross-Coupling Reactions, Yuan Yang

Theses and Dissertations

Palladium-catalyzed carbon-carbon cross-coupling reactions have emerged a broadly useful, selective and widely applicable method to synthesize pharmaceutical active ingredients. As currently practiced in the pharmaceutical industry, homogeneous Pd catalysts are typically used in cross-coupling reactions. The rational development of heterogeneous catalysts for cross-coupling reactions is critical for overcoming the major drawbacks of homogeneous catalysis including difficulties in the separation, purification, and quality control process in drug production. In order to apply heterogeneous catalysis to flow reactors that may overcome this limitation, the catalyst must be strongly bound to a support, highly stable with respect to leaching, and highly active. While …

The Rational Synthesis Of Bimetallic Catalysts On Oxide Supports, Andrew Phillip Wong

Theses and Dissertations

Catalysts play an important role in many chemical reactions. However, simple impregnated monometallic catalysts are often limited in their function. One way to overcome this limitation is through the incorporation of a secondary metal to the catalysts. These bimetallic catalysts often have synergistic benefits not observed in the monometallic analogues. Here, we focused on the synthesis of bimetallic catalysts using rational methods in order to improve catalyst function; specifically by tuning the particle size, morphology, and composition. The two methods of interests were Strong Electrostatic Adsorption (SEA) and Electroless Deposition (ED). An adaptation of SEA to bimetallic catalysts (coSEA) was …

Toxicological Inhalation Effects Of Metal-Based Nanoparticle Aerosols As Studied By A Portable In Vitro Exposure Cassette, Lynn E. Secondo

Theses and Dissertations

The toxicology of aerosols in occupational settings is often performed through particle collection on a filter followed by reconstitution into cell culture media which can alter the biological effects. Current in vitro exposure systems require additional instruments to control temperature and humidity, making the system bulky and difficult to take to the field. The Portable In Vitro Exposure Cassette (PIVEC) was designed for personal monitoring, characterized using copper nanoparticles, tested with alveolar cells, and set-up for real-time monitoring. Three differently sized copper nanoparticles, 40-800 nm, were dispersed as a dry aerosol and measured gravimetrically and on a number concentration basis …

Metabolic Engineering Of Serratia Marcescens, Qiang Yan

Theses and Dissertations

The potential value of the chitin biomass (e.g. food waste) is recently considered being ignored by landfill. Chitin can be a potential cheap carbon source for converting into value-added chemicals by microorganisms. Serratia marcescens is a chitinolytic bacterium that harbors endogenous chitinase systems. With goals of characterzing S. marcescens chitinolytic capabilities and applying S. marcescens to chemical production from chitin, my dissertation main content includes five chapters: 1) Chapter 1 highlights background information of chitin source, S. marcescens and potential metabolic engineering targets using chitin as a substrate; 2) Chapter 2 demonstrates that ChiR is a key regulator in regulating …

Process Optimization For The Synthesis Of Gold Nanoparticles From A Mixed Metal Precursor Solution, Kathryn Ann Dill

Theses and Dissertations

Separation methods involving a mixture of metals typically include upfront processing that leads to one final product. To lower the waste and ultimately environmental burden, the potential to synthesize multiple functional products from a mixed metal precursor solution is explored. The initial precursor solutions contained varying ratios of gold and copper, gold and nickel, and finally a ternary solution of gold, copper, and nickel. The amount of gold was kept constant, while the amount of copper and/or nickel was sequentially increased. Two separate synthesis processes were tested, the traditional Turkevich method involving trisodium citrate and another chemical reduction method involving …

Design, Synthesis, And Characterization Of Monometallic And Bimetallic Catalysts, Sonia Eskandari

Theses and Dissertations

Supported catalysts are used extensively in a variety of heterogeneously catalyzed reactions for industrial processes. Techniques for preparing supported noble metal catalysts are typically chosen to achieve high metal dispersions in order to obtain high activity for a given metal loading. Enhancing the catalytic performance of heterogeneous catalysts can be done by increasing active site count as well as modification of the physico-chemical characteristics of the catalyst material. For supported metal nanoparticles this can be achieved by decreasing particle size, thus increasing dispersion or metal utilization on the surface of the particles, while modification of metal properties can be attained …

A Molecular Simulation Study Of Antibody-Antigen Interactions On Surfaces For The Rational Design Of Next-Generation Antibody Microarrays, Derek B. Bush

Theses and Dissertations

Antibody microarrays constitute a next-generation sensing platform that has the potential to revolutionize the way that molecular detection is conducted in many scientific fields. Unfortunately, current technologies have not found mainstream use because of reliability problems that undermine trust in their results. Although several factors are involved, it is believed that undesirable protein interactions with the array surface are a fundamental source of problems where little detail about the molecular-level biophysics are known. A better understanding of antibody stability and antibody-antigen binding on the array surface is needed to improve microarray technology. Despite the availability of many laboratory methods for …

Improving Thermodynamic Consistency Among Vapor Pressure, Heat Of Vaporization, And Liquid And Ideal Gas Heat Capacities, Joseph Wallace Hogge

Theses and Dissertations

Vapor pressure (P_vap), heat of vaporization (ΔH_vap), liquid heat capacity (C_p^l), and ideal gas heat capacity (C_p^ig) are important properties for process design and optimization. This work focuses on improving the thermodynamic consistency and accuracy of the aforementioned properties since these can drastically affect the reliability, safety, and profitability of chemical processes. They can be measured for pure organic compounds from the triple point, through the normal boiling point, and up to the critical point. Additionally, ΔH_vap is proportional to the derivative of vapor …

Effect Of Bioglass Incorporation Into Electrochemically Aligned Collagen Threads On Mechanical Properties And Cell-Mediated Mineralization, Madhura Nijsure

Theses and Dissertations

Bone related diseases and disorders are a significant socioeconomic burden in the United States. Autografts and allografts are most commonly used for the treatment of bone defects and non-unions; however, they are associated with limitations such as donor site morbidity and immune rejection, respectively. Over the past few decades, bone tissue engineering (BTE) using scaffold and cells has garnered significant interest as an alternative method for the repair and regeneration of bone defects. Recreation of the tissue microenvironment via the development of biomimetic scaffolds that resemble the physicochemical aspects (i.e., composition, topography, stiffness) of native bone is a promising approach …

Cell-Free Synthesis Of Proteins With Unnatural Amino Acids: Exploring Fitness Landscapes, Engineering Membrane Proteins And Expanding The Genetic Code, Song Min Schinn

Theses and Dissertations

Unnatural amino acids (uAA) expand the structural and functional possibilities of proteins. Numerous previous studies have demonstrated uAA as a powerful tool for protein engineering, but challenges also remain. Three notable such challenges include: (1) the fitness of uAA-incorporated proteins are difficult to predict and time-consuming to screen with conventional methods, (2) uAA incorporation in difficult-to-express proteins (e.g. membrane proteins such as G-protein coupled receptors) remain challenging, and (3) the incorporation of multiple types of uAA are still limited. In response, we pose cell-free protein synthesis (CFPS), a rapid and versatile in vitro expression system, as a platform to explore …

A Comprehensive Coal Conversion Model Extended To Oxy-Coal Conditions, Troy Michael Holland

Theses and Dissertations

CFD simulations are valuable tools in evaluating and deploying oxy-fuel and other carbon capture technologies either as retrofit technologies or for new construction. However, accurate predictive simulations require physically realistic submodels with low computational requirements. In particular, comprehensive char oxidation and gasification models have been developed that describe multiple reaction and diffusion processes. This work extends a comprehensive char conversion code (the Carbon Conversion Kinetics or CCK model), which treats surface oxidation and gasification reactions as well as processes such as film diffusion, pore diffusion, ash encapsulation, and annealing. In this work, the CCK model was thoroughly investigated with a …

Particle Deposition Behavior From Coal-Derived Syngas In Gas Turbines At Modern Turbine Inlet Temperatures, Robert Laycock

Theses and Dissertations

Certain types of fuel used for combustion in land-based gas turbines can contain traces of ash when introduced into a gas turbine. Examples include synfuel, from the gasification of coal, and heavy fuel oil. When these ash particles travel through the hot gas path of the gas turbine they can deposit on turbine vanes and blades. As deposits grow, they can reduce turbine efficiency and damage turbine hardware. As turbine inlet temperatures increase, ash deposition rates increase as well.Experiments were conducted in the Turbine Accelerated Deposition Facility (TADF) at Brigham Young University to better understand ash deposition behavior at modern …

Multi-Fidelity Model Predictive Control Of Upstream Energy Production Processes, Ammon Nephi Eaton

Theses and Dissertations

Increasing worldwide demand for petroleum motivates greater efficiency, safety, and environmental responsibility in upstream oil and gas processes. The objective of this research is to improve these areas with advanced control methods. This work develops the integration of optimal control methods including model predictive control, moving horizon estimation, high fidelity simulators, and switched control techniques applied to subsea riser slugging and managed pressure drilling. A subsea riser slugging model predictive controller eliminates persistent offset and decreases settling time by 5% compared to a traditional PID controller. A sensitivity analysis shows the effect of riser base pressure sensor location on controller …

Metallization Of Self-Assembled Dna Templates For Electronic Circuit Fabrication, Bibek Uprety

Theses and Dissertations

This work examines the deposition of metallic and semiconductor elements onto self-assembled DNA templates for the fabrication of nanodevices. Biological molecules like DNA can self-assemble into a variety of complex 2-D and 3-D architectures without the need for expensive patterning tools. In addition, self-assembled DNA templates can be designed to controllably place functional nanomaterials with molecular precision. These characteristics make DNA an attractive template for fabricating electronic circuits from biological molecules. However, electrically conductive structures are required for electronic applications. While metallized DNA nanostructures have been demonstrated, the ability to make thin, continuous wires that are electrically conductive still represents …

Production Of Mesophase Pitch From Gasified Lignin-Derived Tars, Adedayo O. Idowu

Theses and Dissertations

Lignin tars are created as a by-product of lignin gasification. Significant effort has gone into minimizing tar production. However, no process has been shown to completely eliminate its formation. As a result, the tar is being used to manufacture low value products such as asphalt, or is being used as a fuel in fixed combustion systems.

The research presented here is part of an effort to increase the viability of using lignocellulosic biomass as a feedstock to produce high value products. We tested the postulate that tars derived from lignin could be processed into a mesophase pitch allowable for conversion …

Assessing The Effects Of Sensitizing Tungsten Oxide With Zinc Telluride, Chengeto Kazuva

Theses and Dissertations

This thesis is a comparison study of the performance of plain tungsten oxide (WO₃) thin films and tungsten oxide thin films sensitized with zinc telluride (ZnTe) as photoelectrocatalysts. Tungsten oxide and zinc telluride are semiconductors which were prepared on indium tin oxide (ITO) coated glass, and subsequently studied for water splitting applications. The main method of synthesis employed was electrochemical deposition. Tungsten oxide thin films were deposited from a precursor solution of peroxotungstic acid while the zinc telluride thin films were deposited from a solution containing dissolved zinc sulfate heptahydrate, sulfuric acid and tellurium dioxide. Surface morphology, film composition and …

Decellularization And Recellularization Processes For Whole Porcine Kidneys, Nafiseh Poornejad

Theses and Dissertations

Concern over kidney disease has increased dramatically in recent years within the medical community. It is estimated that approximately one in fifteen Americans, nearly 20 million people, experience chronic kidney disease with most of those diagnosed progressing to kidney failure. The ultimate treatment available for end stage renal failure is whole kidney transplantation. However, there are very few kidneys available for patients to receive and those patients who are fortunate enough to receive an organ must remain on immunosuppressive medication for the remainder of their lives. The United States Department of Health & Human Services have reported that 18 people …

Toxicological Differences Between Perfluoroalkyl Substances (Pfas) Isomers Using Developmental Biomarkers, Gabriel A. Cantu

Theses and Dissertations

Perfluoroalkyl substances (PFAS) are metabolically stable synthetic chemicals that have been manufactured for commercial and industrial purposes since the 1950s. PFAS possess surfactant properties that make them ideal to fight hydrocarbon fires and are therefore present in aqueous film forming foams (AFFF). Furthermore, AFFF may contain blends of both linear and branched PFAS isomers. Research suggests that branched PFAS isomers have greater relative placental transfer efficiencies than their linear counterpart, but few studies have evaluated their toxicity. Therefore, the sustained use of AFFF in the U.S. Air Force presents a risk of branched PFAS exposures in pregnant females. This study …

Engineering Cell-Free Protein Synthesis Technology For Codon Reassignment, Biotherapeutics Production Using Just-Add-Water System, And Biosensing Endocrine Disrupting Compounds, Sayed Mohammad Salehi

Theses and Dissertations

Cell-free protein synthesis is an emerging technology that has many applications. The open nature of this system makes it a compelling technology that can be manipulated to answer many needs that are unavailable in other systems. This dissertation reports on engineering this technology for: 1) sense codon emancipation for incorporation of multiple unnatural amino acids; 2) expressing a hard-to-express anticancer biotherapeutic and introducing a just-add-water system; 3) a biosensing ligand that interacts with nuclear hormone receptors. Emancipating sense codons toward a minimized genetic code is of significant interest to science and engineering. A promising approach to sense codon emancipation is …

Synthesis Of Novel, Highly Bio-Based Monomeric Materials Derived From Lignocellulosic Biomass And Their Respective Epoxy Resins, Polycarbonates, And Polyesters, Joseph Randall Mauck

Theses and Dissertations

The development of high performance polymers from renewable feedstocks is a crucial step toward a global economy that is less dependent on fossil resources and has been a field of increasing study. The development of novel and interesting bio-based monomers, resins, and functional building blocks is critical to the improvement of polymers produced across the field, as well as to increasing the resource base from which chemical and materials engineers can draw to meet specific polymer property requirements. To this end, interesting tri-functional (trisguaiacol) and 4-vinyl guaiacol based hetero-difunctional monomers were developed and screened for preliminary polymer properties. The applications …

Co2 Capture From Flue Gas By A Psa Process Using A Novel Structured Adsorbent, Nima Mohammadi

Theses and Dissertations

First adsorption equilibrium isotherms for N2, O2, Ar and CO2 on zeolite 13X were measured at three temperatures (25, 50, 75 °C) and pressures up to 110 kPa with a volumetric method and validated by also measuring the same isotherms with a gravimetric system.

Then a comprehensive 2-D mathematical model was developed to study the fundamentals of adsorption processes in parallel channel structured adsorbents. The results clearly indicated that under studied circumstances the plug flow condition can be assumed and therefore the system is not subject to premature breakthrough.

The pressure drop of corrugated structured adsorbents with narrow triangular channels …

Modeling Battery Performance Due To Volume Change In Porous Electrodes Due To Intercalation, Taylor R. Garrick

Theses and Dissertations

The demand for energy continues to increase as the economies of developing countries become more modern and show an increased need for a reliable energy infrastructure in order to meet the increased demand associated with a large and more mobile population. An increased demand puts a strain on all sectors, however it is specifically noticeable in the transportation sector where a significant portion of the fuel utilized for transportation comes from petroleum and other fossil fuels. Recently, using alternative forms of energy for transportation has become reality, and in turn, using electricity as a transportation fuel has gained significant momentum, …

Supercritical Carbon Dioxide Treatment Of Natural Biomaterials For Tissue Engineering Applications, Dominic M. Casali

Theses and Dissertations

The number of people requiring an organ transplant in the United States has increased considerably over the past 25 years, but the number of organ donations has stagnated; over 8,000 people now die annually while awaiting a transplant or become too sick to receive one. Tissue engineering (TE), the design and production of artificial tissues and organs in vitro, has been proposed to alleviate this problem. Though synthetic polymers offer tunable mechanical and biochemical properties, natural biomaterials have recently garnered attention in TE for their high degree of biocompatibility and ability to direct cell proliferation and constructive tissue remodeling. Yet …

Rational Synthesis Of Catalysts For Biomass Conversion, Qiuli Liu

Theses and Dissertations

With climate change due to global warming, the production of hydrocarbon fuels and chemicals from renewable biomass resource has become more pressing in recent decades. The biggest challenge in biomass conversion is to develop active, selective and stable catalysts for particular applications. The objective of this research is to optimize catalytic performance for hydrodeoxygenation (HDO) and hydrogenation reactions by enhancing the stability of the support, tuning metal particle size, and controlling surface composition.

The high content of water in bio-oil and the aqueous environment of the upgrading process requires a hydrothermally stable catalyst. The hydrothermal stability has been effectively improved …

Structural, Interfacial, And Electrochemical Properties Of Pr2nio4+Δ – Based Electrodes For Solid Oxide Fuel Cells, Emir Dogdibegovic

Theses and Dissertations

Currently, the electrochemical performance and performance durability of solid oxide fuel cells (SOFCs) are limited by cathode materials. The high polarization resistance and phase instability of the cathode are two major challenges to hinder the commercialization of SOFC systems. Two families of oxides are presently known as potential cathode materials for SOFCs: (1) the perovskite family of oxides with a general formula of ABO₃, and (2) the Ruddlesden-Popper (RP) family of oxides (e.g. nickelates) with a general formula of A₂BO₄. The electron-hole conduction in these materials occurs simultaneously with oxygen ion conduction based on …