Chemical Engineering Commons^™

The Spectrum Of Light Scattered From Particles Suspended In A Turbulent Fluid, R. V. Edwards, J. C. Angus, R. Maurer, J. W. Dunning

Symposia on Turbulence in Liquids

All Laser Doppler Velocimeter (LDV) measurements are made by scattering light from small particles suspended in the flow. Further, the scattered light is collected from some finite region within the flow -- commonly called the "sample-volume." These two facts comprise the necessary starting point of an analysis of an LDV.

Correlation And Statistical Characteristics Of Turbulence Fronts In The Wakes Of Hypervelocity Bodies, R. H. Howell, J. L. French

Symposia on Turbulence in Liquids

Data on statistical wake turbulence of the far wake of sphere and cone models with velocities from 9,800 to 21,500 feet/second and range pressures from 50 to 120 mm Hg. are presented and analyzed. The measurement technique used is that of observing the turbulence edge position of the wake on schlieren films. The measured parameters are the wake width; edge roughness; auto-correlation function; microscale; e-fold; integral, and average eddy lengths; wake dissipation parameter; Kolmogoroff and energy containing wave number parameters; Lagrangian integral time scale parameter; Strouhal number; cross-correlation function; and wake edge velocity. The results of these measurements are compared …

Visualization Of Unsteady Flow Over Oscillating Airfoils, G. H. Ruiter, H. M. Nagib, A. A. Fejer

Symposia on Turbulence in Liquids

This study is concerned primarily with the complex nature of leading edge flow separation occurring on airfoils oscillating in a uniform flow field at low Reynolds numbers. The flow field past an oscillating airfoil and a fixed airfoil with an oscillating flap were investigated using various visualization techniques in water. The role of mean flow velocity, instantaneous angle of attack, mean angle of attack and amplitude and frequency of oscillation as well as the location of the support point are examined. The results which were obtained over a range of parameters substantially beyond previous studies include new information regarding the …

Turbulence Measurements Using The Laser Doppler Velocimeter, J. W. Dunning, N. S. Berman

Symposia on Turbulence in Liquids

Although the laser Doppler velocimeter has been used for turbulence measurements in the past, no set of measurements in practical turbulent flows has been available to evaluate the instrument. In this work we examine in detail the photomultiplier signal representing the axial velocity of water within a glass pipe. We show that with proper analysis of the photomultiplier signal, the turbulent information that can be obtained in liquid flows is equivalent to recent hot-film studies. In shear flows the signal from the laser Doppler velocimeter contains additional information which may be related to the average shear.

A Critical Survey Of Turbulence In Bearings, E. A. Saibel, N. A. Macken

Symposia on Turbulence in Liquids

The subject of turbulence in bearings is critically surveyed. Both experimental and theoretical investigations are discussed. It is noted that beyond the laminar range, Taylor vortices develop. Some vortex structure exists even up to the highest Reynolds numbers. This suggests that the turbulence in bearings is much different from that which is found in other flows such as pipes or boundary layers. Unfortunately, the theoretical models have been based on mixing length or "law of the wall" information. A call is made for experimental information to formulate new theory applicable to bearings.

Parameter For Comparing Anemometer Response, L. M. Fingerson

Symposia on Turbulence in Liquids

In comparing the theoretical performance of sensors, the term e_b/q (voltage change due to change In heat transfer) was found to be a fundamental sensor parameter. This was true for both sensitivity and frequency response in both constant current and constant temperature systems. Equations and data are presented for calculating this parameter for most wire and film sensors. Wedges, cones, and other non-cylindrical sensors have not been included because of their special problems at low frequencies due to conduction losses.

Internal cooling of the sensor is used for high temperature environments. Calculations show that the sensitivity at low …

An Attempt To Characterize The ‘Turbulence Burst Phenomena’ Using Digital Time Series Analysis, B. Johnson, R. Saylor

Symposia on Turbulence in Liquids

Several attempts to measure "periodicity" in the output signal of hot wires and hot films located in the viscous sublayer have been made in recent years. The usual method is to perform an autocorrelation on the signal and to interpret the strong peaks in the correlation function as indicative of the mean period of the "turbulence bursts" during a particular sampling interval.

The data analyzed for the presence of "turbulent bursts" were from the test of a 60-foot, 8-oared racing shell at the David Taylor Model Basin of the Naval Ship Research and Development Center. The shell was instrumented with …

Conference Proceedings Of The Symposium On Turbulence In Liquids October 4-6, 1971, University Of Missouri--Rolla

Symposia on Turbulence in Liquids

No abstract provided.

Front Matter, University Of Missouri--Rolla

Symposia on Turbulence in Liquids

No abstract provided.

The Influence Of Ambiguity And Noise On The Measurement Of Turbulent Spectra By Doppler Scattering, J. L. Lumley, W. K. George, Y. Kobashi

Symposia on Turbulence in Liquids

A fundamental uncertainty in velocity measurement by Doppler scattering is caused by the finite residence time of the scattering particles in the observation volume; the arrival of scattering particles at arbitrary times gives rise to fluctuations in phase (and hence frequency) of the observed Doppler frequency. An estimate is obtained for the spectrum of these frequency fluctuations (called ambiguity noise). The frequency at which the spectral levels of a turbulent signal and the ambiguity noise are equal, provides a limit to the temporal resolution of an instantaneous velocity measurement; this limit is obtained, and shown to be quite restrictive. The …

Laser-Doppler Measurements Of The Decay Of Velocity Fluctuations In Dilute Polymer Solutions, Neil S. Berman, Eugene E. Cooper

Symposia on Turbulence in Liquids

Finite disturbances were generated in a pipe containing water or a 20 ppm solution of Separan AP-30 in water by oscillating a sleeve at the wall. The sleeve amplitude in the axial direction varied from 0.5 to 2.0 inches and the frequency from 0.25 to 1.0 Hz. Downstream of the sleeve oscillations in the fluid velocity were measured with a laser Doppler flowmeter at various axial and radial positions to determine behavior at the lower frequency part of the stability curve for water. The response amplitude, phase angle and the mean velocities were measured for both fluids at Reynolds numbers …

Optical Statistical Measurements Of Free Convection Flow Patterns, E. F. C. Somerscales

Symposia on Turbulence in Liquids

Measurements have been made of the autocorrelation of photographs of the flow patterns produced at high Rayleigh numbers in a horizontal layer of liquid heated from below and cooled on top. The relation of these measurements to temperature measurements in the fluid are considered. Analogous situations in other physical systems are also discussed.

The Use Of Electrochemical Techniques To Study Turbulence Close To A Wall, Kamalesh K. Sirkar, Thomas J. Hanratty

Symposia on Turbulence in Liquids

Electrochemical techniques can be used to measure the time averaged velocity gradient and the two components of the fluctuating velocity gradient at a solid surface. A chemical reaction Is carried out at the surface of a small electrode embedded in the wall. The voltage applied to the electrode Is large enough that the current flowing in the circuit is controlled by the mass transfer rate. The probes are the mass transfer analog of the hot wire or hot film anemometer. If the test electrode is part of a large electrode surface, it can be used to measure local time averaged …

Ultrasonic Study Of Turbulent Water Flow, W. K. Kramer, R. Grosskreutz, A. Dinkelacker

Symposia on Turbulence in Liquids

The propagation of ultrasonic waves through turbulent water flow has been Investigated experimentally. While passing the turbulent region the sound waves are modulated to some extent. The degree of modulation and the frequency spectra of the modulation are closely related to the properties of the flow. It seems to be possible to use this method for turbulence measurements in liquids, whereby the absence of a probe in the flow region and a possibility to differentiate between velocity and density fluctuations would be special advantages. A disadvantage can be the fact that Information is collected on the whole sound path.

Turbulence Measurements In Water, Francois J. Resch

Symposia on Turbulence in Liquids

Turbulence measurements in water have been undertaken using hot film anemometers in a circular conduit. Two different types of film probe were tested and the problem of drift of the calibration curves was carefully studied. A heat transfer law was established for conical hot film probes.

Some turbulence measurements, made at the axis of the pipe, were compared with the corresponding measurements undertaken in air flow. The comparison led to the conclusion that turbulence measurements can be carried out in water with the same degree of accuracy as those carried out in dynamically similar air flow.

Two-Dimensional Laser-Doppler Velocimetry In Turbulent Flows, N. E. Chatterton, R. D. Lewis, E. W. George

Symposia on Turbulence in Liquids

Localized measurement of the velocity of flow In fluids may be accomplished by detecting the Doppler shift In frequency from coherent, monochromatic light scattered from micrometer sized contaminant particles within the flow. The versatility of applications of this technique, first used several years ago, has been expanded by recent research. The basic geometry of measurement, in which the scattered energy is recombined with light energy at the original frequency on the face of the photocathode of a photomultiplier tube, can be rearranged in many alternative configurations to meet the needs of the experimenter. By using a single laser, additional arrangements …

Turbulence Measurements In Shear Flow Liquid Systems, Robert S. Brodkey, M. F. Cohen, J. S. Knox, G. L. Mckee

Symposia on Turbulence in Liquids

The paper is a composite of a number of years of work on turbulence measurements in a variety of liquid flow systems. The trials and tribulations of such measurements are emphasized. Pipe flow Is considered in some detail, and the consistency between results of various investigators is analyzed. Other systems discussed are a stirred tank unit and a multi-jet reactor configuration. Statistical turbulence measurements such as autocorrelation, spectrum, probability density, flatness factor, and skewness factor are considered in terms of obtaining these from digital signals obtained by conversion of the normal analog signals. Descriptive parameters of statistical turbulence, such as …

Bibliography Of Hot-Wire-Film Anemometry In Liquids, R. L. Humphrey

Symposia on Turbulence in Liquids

It is not a new idea to use heat transfer from a hot sensor in a fluid stream to measure velocity and turbulence. This was done as long ago as 1909 by Mr. Kenelly, but a systematic study was not followed through until 1914 by L. V. King. After this followed a series of dedicated people, some students, some professors, some scientists, who continually advanced the state of the art of anemometry in liquids. This paper deals with their work in the areas of electronics (integrated circuits) and physics (thin film technology), and shows how, in time, these two areas …

Some Basic Properties Of Low Quality Two-Phase Turbulent Flow, G. Hetsroni, S. Einav

Symposia on Turbulence in Liquids

This Is an exploratory study dealing with the effect of gas bubbles on the turbulence Intensity of the liquid in a two-phase flow.

Distributions of time-mean and fluctuating velocities were measured in a two - dimensional channel. These were measured for single-phase flow and on the two sides of a bubble layer, which simulated the two-phase flow.

In single-phase flow the distribution of the time-mean velocities agrees well with other data, while the distribution of the Intensity of turbulence Is lower than expected.

The measurements of the time-mean velocity and turbulence Intensity across the bubble layer revealed that they are …

Turbulence Measurements In Stably Stratified Fluids, Yih-Ho Pao

Symposia on Turbulence in Liquids

A towing tank system was used to study the structure of turbulence in stably stratified fluids. Turbulence is generated by moving an obstacle (a grid or a cylinder) in a tank of stratified salt water. Recent improved shadowgraph pictures of these laboratory generated stratified flows are shown in this paper. They give further support to Pao's observation that (i) internal waves and turbulence coexist in turbulent stratified flows, with internal waves at the large scales and turbulence at the small scales; (ii) turbulence decays much more rapidly than internal waves; and (iii) the turbulent-nonturbulent interfaces are not necessarily sharp, and …

The Response Of A Hot-Wire Anemometer To A Bubble Of Air In Water, S. C. Chuang, V. W. Goldschmidt

Symposia on Turbulence in Liquids

The sensitivity of peak voltage drop and duration of the change In sensor voltages due to the impaction of different size bubbles are confuted and measured. Excellent agreement between these is found for bubbles somewhat larger than the sensor diameter and smaller than Its effective length in water streams in a range of 1.5 to 9 feet per second. The method suggests a reliable method for sizing bubbles in a water stream. The effects due to nondirect hits are not treated.

Experimental Investigation Of Polymer Solution Injection On External Boundary Layers, Brian Latto, Chi-Hung Shen

Symposia on Turbulence in Liquids

This paper describes an experimental study of the effects of injecting dilute aqueous polymer solutions into a turbulent boundary layer formed on a flat plate immersed in flowing water.

Hot-film anemometer techniques were employed in the measurement of the velocity profiles, turbulence intensities, and lateral correlation coefficients at a number of locations along the plate. Boundary layer growth parameters and the variation of the local skin friction coefficient were computed from the velocity profile data. The effects of polymer concentration and injection velocity on the local drag reduction are also presented.

It was found that momentum diffusivity was smaller than …

Turbulence Measurements In Dilute Polymer Flows, Joseph M. Wetzel, John A. Almo, John M. Killen

Symposia on Turbulence in Liquids

A hot-film sensor was flush-mounted in the wall of a four-inch pipe and was calibrated as a function of wall shear stress. Flows with water and with homogeneous aqueous solutions of Polyox WSR-301 were utilized. The heat transfer characteristics of the sensor were reduced for polymer flows. Measurements of the number of zeroes and the frequency spectra for the turbulent fluctuations were obtained for a variety of test conditions. The effects of Polyox WSR-301 on surface pressure fluctuations on both smooth and rough surfaces were also measured.

An Experimental Facility For The Visual Study Of Turbulent Flows, Robert S. Brodkey, Harry C. Hershey, Edward R. Corino

Symposia on Turbulence in Liquids

An experimental technique which allows visual observations of the wall area in turbulent pipe flow is described in detail. It requires neither the introduction of any injection or measuring device into the flow nor the presence of a two-phase flow or of a non-Newtonian fluid. The technique involves suspending solid MgO particles of colloidal size in trichloroethylene and photographing their motions near the wall with a high speed movie camera moving with the flow. Trichloroethylene was chosen in order to eliminate the index of refraction problem in a curved wall.

Evaluation of the technique including a discussion of limitations is …

Experimental Investigation Of The Hydrodynamic Stability Of Flow In Rotating Pipes Using Thermistors, Hassan M. Nagib, Ludwig Wolf Jr.

Symposia on Turbulence in Liquids

The hydrodynamic stability of flow in a rotating pipe Is investigated experimentally using thermistors. The experimental apparatus consists of a rotating pipe made of lucite, 3-1/4 inch inside diameter, six feet long, equipped with porous plugs at the ends to minimize recirculation. The working fluid is water and a range of axial and tangential Reynolds numbers up to 7,000 and 20,000, respectively, is covered. Thermistors were chosen for this study since their high electrical resistivity yields strong signals which permit the use of inexpensive and convenient electronics. They also have a high temperature coefficient of electrical resistance which minimizes the …

The Structure Of A Turbulent Water Jet, Philip J. Morris

Symposia on Turbulence in Liquids

Experimental studies are made to determine the structure of a turbulent water jet.

The paper is divided into two parts. The first gives practical information about the techniques and instrumentation developed to make measurements with hot-wire anemometers in water. A short theoretical discussion is given on the dynamic response of heated fibre in liquids. The second part reports on the results obtained in a one-inch water jet at Reynolds numbers between 12,000 and 20,000. Mean axial velocity measurements are made in the initial five diameters of the jet and the results are used to predict the nature of the vortex …

Author Index, University Of Missouri--Rolla

Symposia on Turbulence in Liquids

No abstract provided.

Diffusion Coefficients Over Rough And Smooth Boundaries, Obtained By Measuring The Concentration-Velocity Covariance, R. S. Mcquivey, T. N. Keefer

Symposia on Turbulence in Liquids

A preliminary investigation of the coefficients of turbulent diffusion in an open channel was conducted by employing: 1) hot-film anemometry to detect the velocity fluctuation, 2) a platinized single-electrode conductivity probe to detect the concentration fluctuations, and 3) a digital computing system to evaluate the covariance and other statistical properties of the two output signals.

Data were collected downstream of a constant-discharge point source of neutrally-bouyant salt solution at stream temperature and velocity. Using current semi-empirical methods diffusion coefficients were obtained in the vertical and lateral directions as well as dispersion coefficients due to convection.

Use Of A Constant Temperature Hot-Wire Anemometer To Compensate For The Thermal Lag, Peter Freymuth

Symposia on Turbulence in Liquids

A constant temperature hot-wire anemometer can be used to compensate for the thermal lag of a wire or film resistance thermometer within the useful frequency range of the anemometer. This method may be used as an alternative to the standard method in which a differentiation circuit as employed in constant current anemometers is used for frequency compensation. The new method is useful if a constant temperature anemometer is at hand. The time constant of the resistance thermometer need not be determined.

Frequency Response Studies For A Wedge Probe In Viscoelastic Fluids, J. M. Rodriguez, Gary Kent Patterson, J. L. Zakin

Symposia on Turbulence in Liquids

The response of a hot-film wedge probe in viscoelastic fluids has been investigated by imposing on the probe a sinusoidal vibration of known amplitude and frequency. Root-mean-square (rms) velocities calculated from the displacement of the probe were compared to rms velocities obtained with a constant temperature anemometer. The tests were performed under turbulent flow conditions and also at flow rates where viscoelastic effects (i.e., decrease of heat transfer rates from the probe to the fluid and drag reduction) were observed.

The frequency range covered was narrow ( < 100 cps). This limitation was imposed by the decision to superimpose the sinusoidal vibrations on the turbulence signal, in order to have dynamic conditions similar to those encountered in actual turbulence measurements. Measurements were performed in mineral oil and four solutions of polyisobutylene (Vistanex L-200) In mineral oil.

The experimental technique was established by measuring the response of the probe in …