Chemical Engineering Commons^™

Numerical Simulation Study Of Gel Treatment For Conformance Control From Lab To Field, Jianqiao Leng

Doctoral Dissertations

“Gel treatment has been widely applied to control reservoir conformance and thus improve the sweep efficiency of injection fluids. Quite a few numerical simulations have been conducted to investigate the factors impacting gel treatment and assist to optimize treatment design and predict the performance. However, there exists significant barrier between the simulation approaches and lab experiments. In this study, two comprehensive reviews have been conducted to identify the gaps between lab and current simulations for in-situ polymer treatment and preformed particle gel treatment, separately.

Based on the identified gaps, the effect of a few major factors which are very important …

Development And Testing Of A New Air-Assisted Flare System For Low Flow Conditions, Hayder Alhameedi

Doctoral Dissertations

"Flare systems provide a safe, efficient, and reliable way to treat unwanted flammable gases that come from relief devices of various chemical processing equipment to ensure the safety of personnel and equipment. Flare systems are classified according to the assist media type as non-assisted (utility), steam-, air-, and pressure-assisted flares. The assist medium enhances mixing between flare gases and surrounding air and induces more air into the combustion zone. An air-assisted flare system is the preferred flare type in regions where steam is unavailable or is costly to supply or ambient temperatures are too low. The environmental protection agency (EPA) …

Surface Modification To Improve The Electrochemical Performance Of Cathode Materials For Lithium-Ion Batteries And Sodium-Ion Batteries, Han Yu

Doctoral Dissertations

"The specific capacity of active materials as well as their cycling stability are the main limiting factors for the performance of lithium-ion batteries (LIBs) and sodium-ion batteries (SIB). Atomic layer deposition (ALD) is considered as a promising surface modification method to enhance the electrochemical performance of active materials for LIBs and SIBs.

In this research, we are committed to using ALD to modify the cathode materials of LIB, by coating different films on the surface of different cathode materials and constructing a stable and favorable interface layer for lithium-ion transport, so that we can protect the active materials from the …

Engineering Ni/Al2o3 Catalysts By Atomic Layer Deposition For Methane Reforming, Baitang Jin

Doctoral Dissertations

"Dry reforming of methane (DRM) could be a promising choice to utilize natural gas (mainly methane or CH₄), recycle captured CO₂, and produce valuable syngas. Promoters (e.g., CeO₂ and MgO) on Ni/Al₂O₃ prepared by atomic layer deposition (ALD) and ALD-prepared ultrathin overcoating (e.g., ZrO₂ and CeO_x) on Ni/Al₂O₃ prepared by incipient wetness method were investigated for methane reforming.

MgO and CeO₂ prepared by traditional incipient wetness method were used to promote the performance of ALD-prepared Ni nanoparticles (NPs) supported on four-channel α-Al₂O_{3 …}

Computational Fluid Dynamics Techniques For Multiphase Flow Systems, Jose Sebastian Uribe Lopez

Doctoral Dissertations

"Mathematical modelling of multiphase flow systems has been a major and persistent challenge over the last decades. Vast attempts to obtain predictive models can be found reported in literature, where major advances can be recognized in recent years, paired to enhancements in computer science and engineering. Notwithstanding, universally valid models with a mechanistic development are far from being achieved. The current status of modelling any multiphase flow system relies on the model order reduction of purely theoretical models. Such reductions and simplifications become the source of deviations in the predictions of the experimentally measured parameters and will constrain the applicability …

Evaluation Of Novel Preformed Particle Gels For Conformance Control And Acid Stimulation Through Core Flooding Tests, Shuda Zhao

Doctoral Dissertations

"Acid stimulation and conformance control are two major methods to improve oil production. This study systematically evaluates two newly developed gels: Degradable Preformed Particle Gel (DPPG) and Re-crosslinkable Preformed Polymer Gel (RPPG). DPPG is designed to be a temporary plugging agent for acid stimulation and can self-degrade into a water-like fluid. RPPG is designed for reservoir sweep efficiency improvement and can re-crosslink to each other and form an immobile bulk gel after being placed in fractures or fracture-like conduits.

For DPPG, this study evaluates the effect of monomer, crosslinker, and initiator concentration on the swelling and degradation performance. Results show …

Valorization Of Secondary Agriculture Residues, Narendra Kumar

Doctoral Dissertations

Secondary agriculture residues have the potential to be major contributors as resources for energy and sustainably sourced materials production. Separating secondary agricultural residues, which have already been transported to processing centers, into individual biomass components could convert these wastes into bioproducts. Many types of pretreatments to achieve this separation involve chemicals that are hazardous for the environment. Several deep eutectic solvents (DES) that are biocompatible have been investigated for their ability to deconstruct rice hulls and sugarcane bagasse. Mass yield, enzymatic hydrolysis of the pretreated biomass, fiber analysis, and Fourier transform infrared spectroscopy have confirmed that the DES formic acid:choline …

Extracting Metallurgy Contaminants And Hydrocarbons Removing From Water And Industrial Wastewater Using Enhanced Emulsion Liquid Membrane With Nanoparticles And Ionic Liquid, Qusay Al-Obaidi

Doctoral Dissertations

It is an uphill battle to extract pollutants such as heavy metals, hydrocarbons, and radioactive metals from water and industrial wastewater. Emulsion liquid membrane (ELM) is an emerging technology that combines extraction/recover and stripping in one stage to extract/recover heavy metals and/or hydrocarbons from water and wastewater. ELM devised a way to clean up heavy metals and/or hydrocarbons from the water and wastewater where its primary chemicals can be recycled and reused.

In this work, the Emulsion Liquid Membrane (ELM) has been enhanced by adding nanoparticles and ionic liquid to significantly improve the recovery of the water-based contaminants of heavy …

Catalytic Carbon Dioxide Hydrogenation To Methanol/Dimethyl Ether Over Copper-Based Catalysts, Xiao Fan

Doctoral Dissertations

Direct synthesis of dimethyl ether (DME) via CO₂ hydrogenation has received great attention, owing to the global warming caused by CO₂ emission and increasing energy demand worldwide. In this works, three major aspects of bifunctional catalysts development were studied: (1) investigation of the roles of interaction in the CuO-ZnO-ZrO₂-Al₂O₃/HZSM-5 bifunctional catalysts, (2) deactivation and regeneration of CuO-ZnO-ZrO₂-Al₂O₃ with different zeolitic catalysts for one-step CO₂ hydrogenation to dimethyl ether, and (3) study on the enhancement of activity and stability of CZZA/HZSM-5 bifunctional catalysts via the introduction of …

Evaluation Of Robust Epoxy Resin Sealants For Wellbore Integrity Applications, Mohammed Mousa M Alkhamis

Doctoral Dissertations

"During the drilling and completion phases of oil and gas wells, cement is placed in the wellbore as a barrier between the casing and the formation. All casing strings must be cemented to protect and support the casing, and to isolate production zones. The primary cement must prevent the wellbore fluids from migrating in an annular flow path so as to allow the wells to be utilized without any control problems. The primary cement may fail to deliver full zonal isolation due to several reasons such as insufficient mud removal before the cementing, casing expansion, and contraction, high fluid losses, …

Enhanced Heavy Oil Recovery By Low Salinity Polymer Flood Combined With Microgel Treatment, Yang Zhao

Doctoral Dissertations

“Heavy oil resources account for a large portion of the total oil reserves around the world. The target heavy oil reservoir is located on Alaska’s North Slope (ANS). Advantages of low-salinity HPAM polymer (LSP) over high-salinity polymer (HSP) were demonstrated. LSP could recover more oil with 40% less polymer consumption. No additional oil was recovered by HSP after LSP flood. The first-ever polymer flood pilot on ANS showed remarkable success regarding water cut reduction, oil production increase, delayed breakthrough, and projected oil recovery improvement. Polymer alone was insufficient to achieve satisfactory recovery as the reservoirs were highly heterogeneous. Microgels could …

3d-Printed Adsorbents For Gas Separations: A Material Development, Kinetic Assessment, And Process Performance Investigation, Shane Lawson

Doctoral Dissertations

“Adsorbent materials are promising for various gas purification processes, however, forming them into structured contactors is paramount in enhancing mass transfer properties and reducing pressure losses. In this research, various adsorbents were engineered into structured contactors with 3D printing. The overall goal of this research was to improve the formulation methods of 3D-printed adsorbents and understand their performances in gas separation processes. The specific objectives were to 1) develop new adsorbent 3D-printing strategies, 2) understand the kinetic properties of printed adsorbent monoliths, and 3) assess their process performances. Objective one was addressed by developing five 3D printing techniques: i) oxide …

Studies On Protein Solubility, Ke Li

Doctoral Dissertations

"Solubility is a critical factor of protein-based drugs during processing and patient administration. This study focused on two aspects of solubility: one was the poly (ethylene) glycol (PEG) precipitation of monoclonal antibodies (mAbs) and another was crystallins aggregation that is associated with cataracts. Protein precipitation by PEG is a common technique for downstream processing. The effects of pH, ionic strength and the exclude volume effect on the protein precipitation by PEG were extensively studied, but the effects of glycosylation on protein precipitation by PEG has not been examined. Protein aggregation is not only a problem in downstream processing, but it …

Cyclic Sequential Adsorption Desorption/Thermal-Catalytic Oxidation Of Volatile Organic Compounds: Material Development, Process Advancement/Improvement, And Numerical Modeling, Simulation And Optimization, Busuyi Ojo Adebayo

Doctoral Dissertations

"Volatile organic compounds (VOCs) are a group of useful organic chemicals but when emitted have contributed to air pollution. They affect human health, cause environmental degradation and contaminate our waters and soils, so they need to be controlled. When they exist in dilute concentrations, abatement becomes challenging, thus requiring advanced abatement methods, e.g., sequential adsorption desorption/thermal-catalytic oxidation process. The overall goal of this research was to abate dilute streams of VOCs via the process. The specific objectives were to 1) develop novel adsorbent/catalyst dual-function materials (DFMs) for the process, 2) improve the operability of a one-bed-one-column reactor configuration for the …

Convective-Diffusive Transport In Krogh Cylinders: A Model For Pharmacokinetics, Xianjie Qiu

Doctoral Dissertations

"Drug delivery to inside of the tumor is the important problem. The dynamics of drug delivery is presented here. Previously and particularly for directed delivery, a stirred tank model has been used, which appears to have worked well when compared to experiments. However, the stirred tank models do not include all the mass transfer resistances and towards that end we have used a distributed system called Krogh cylinder. This study focuses on the Krogh cylinder model simulation, both on the fluid flow and the mass transfer. The capillary network is broken down into cylindrical cells, each containing a capillary and …

Investigation Of Packed Bed And Moving Bed Reactors With Benchmarking Using Advanced Measurement And Computational Techniques, Binbin Qi

Doctoral Dissertations

"Trickle bed reactors (TBR), as typical packed bed reactors (PBR), are widely used in various fields. Very limited information regarding the flow behaviors, hydrodynamic, and mathematical models in extrudate catalyst shapes, such as cylinders, trilobes, and quadrilobes, can be found in literatures because the major focus was on spherical shape. Therefore, a hybrid pressure drops and liquid holdup phenomenological model for extrudate catalyst shapes was developed based on two-phase volume averaged equations, which showed high accuracy against experimental data. The maldistribution and dynamic liquid holdup were investigated in quadrilobe catalyst using gamma-ray computed tomography. A pseudo-3D empirical model was developed …

Evaluation Of The Performance Of Different Polymer Gel Systems As An In-Depth Gel Treatment Using Numerical Simulation, Tariq K. Khamees

Doctoral Dissertations

"Oil production from heterogeneous and naturally fractured reservoirs are usually hindered due to the presence of high-permeability streaks and natural fractures networks. Oil production could be more lowered if there is a crossflow from the high- to the low-permeability layers and high mobility ratio. These problems are called conformance problems and the treatment is called conformance improvement technologies (CITs). The aims of CIT is to correct the heterogeneity of the reservoir and to lower the unfavorable mobility ratio. These technologies are leading to the diversion of post-treatment water into the low-permeability layers and to increase the viscosity of the displacing …

Fabrication Of Micro-/Nanofluidic Models And Their Applications For Enhanced Oil Recovery Mechanism Study, Yandong Zhang

Doctoral Dissertations

”Micro-/nanofluidic model, as a potential powerful tool, has been used for decades for investigating fluid flow at pore-scale in energy field. It is still increasingly imperative nowadays to use different micromodels to direct observe pore-level fluid flow and analyze mechanisms of different enhanced oil recovery methods. In this work, three main tasks including three dimensional micromodels (1D,2D,3D) are proposed to fabricate and use for investigating different mechanisms of different enhanced oil recovery methods. For 1D capillary tube micromodel, we fabricate and use it to investigate the dynamics of a trapped oil droplet under seismic vibration. Seismic stimulation is a promising …

Factors Impacting The Transport And Enhanced Oil Recovery Potential Of Polymeric Nanogel In Sandstone, Haifeng Ding

Doctoral Dissertations

"Enhanced oil recovery (EOR) using nanometer-sized particles has drawn great attention in the oil industry because of their various advantages brought by size. However, their applications on a field scale are very limited, especially for deformable nanoparticles. The objective of this research is to explore the transport behavior of deformable polymeric nanoparticles (nanogel), the factors impacting these behavior, and their EOR potentials. First, 240 published nanoparticle core flooding experiment data were collected and analyzed about the extent to what the nanoparticles can improve oil recovery. Results show that on the laboratory scale the incremental oil recovery could be as high …

Studies On The Stability Of Plasma Proteins And Their Fragments, Paul Praveen Nakka

Doctoral Dissertations

“The stability of a protein-based biological drug is an important concern during processing, storage or patient administration. There are various forces which contribute to the stabilizing of proteins. Both hydrogen bonds and hydrophobic interactions play an important role in protein stability. Improper folding or misfolding of proteins leads to aggregation, which is a major problem found in the bioprocessing industry. The objectives of this research are: 1) to determine the effect of environmental factors such as pH, temperature, additives or salts, and cosolvents on the stability human serum albumin (HAS), which is the most abundant protein in plasma, 2) to …

Development Of Novel Materials And Processes For Direct Conversion Of Co₂ Flue Gas To Chemicals And Fuels, Ahmed Al-Mamoori

Doctoral Dissertations

“This research focused on addressing the pressing issues of greenhouse gas emissions that greatly contribute to climate change. Specifically, the focus was given to the reduction of anthropogenic CO₂ emission and its subsequent conversion to commodity chemicals and fuels. In the first part of the research, a series of novel high temperature CO₂ adsorbents including double salts (K-Ca and Na-Ca) and metal-doped calcium oxide (Fe_x@CaO and Ga_x@CaO) was developed and evaluated. Both sets of materials exhibited high CO₂ capacity, fast kinetics, and long-term stability. In particular, at 650 °C, the doped adsorbents comprising …

Catalytic Utilization Of Carbon Dioxide As Renewable Feedstock For Production Of Chemicals And Fuels, Abbas Alaa Jawad

Doctoral Dissertations

"The utilization of CO₂ as a renewable feedstock for producing commodity chemicals and fuels is an interesting challenge to explore new concepts and opportunities in catalysis and industrial chemistry. This sustainable approach not only leads to production of useful chemicals, but also has the potential to mitigate anthropogenic CO₂ emissions to the atmosphere. CO₂ itself is a sustainable and inexhaustibly available carbon source, however, it is inextricably linked to its inherent inertness. It is a thermodynamically stable molecule (ΔG_f = -394.01 kJ.mol^-1) with high oxidation state, hence, reactions of CO₂ must be combined …

Comprehensive Study Of Bio-Diesel Continuous Flow Synthesis, Aso A. Hassan

Doctoral Dissertations

“Energy has become an indispensable factor in preserving economic growth since the commencement of the industrial revolution. In recent years, biodiesel has gained acceptance as a notable alternative to the widely used petroleum-derived diesel fuel because it is biodegradable, non-toxic, and generates fewer exhaust pollutants. Recently, biodiesel studies have focused on the development of process intensification technologies to resolve some technical challenges facing biodiesel production, such as long residence times and catalyst sensitivity. These intensification technologies enhance process mass/heat transfer to achieve a continuous, scalable process that can be easily transported to utilize locally available feed stocks. Five phases have …

Investigating The Factors Impacting The Success Of Immiscible Carbon Dioxide Injection In Unconventional Shale Reservoirs: An Experimental Study, Sherif M. Fakher

Doctoral Dissertations

"Unconventional shale reservoirs are currently gaining significant interest due to the huge hydrocarbon volumes that they bear. Enhanced oil recovery (EOR) techniques have been suggested to increase recovery from shale reservoirs. One of the most promising EOR methods is gas EOR (GEOR), most notably carbon dioxide (CO₂). Not only can CO₂ increase oil recovery by interacting with the oil and the shale, but it has also been shown to adsorb to the shale rock and thus is effective in both EOR applications and also carbon storage purposes. This research aims to experimentally investigate several of the interactions …

Process Intensification Of Fuel Synthesis And Electrolysis, Jeremy Lee Hartvigsen

Doctoral Dissertations

”As more renewable energy is added to the electric grid, energy storage becomes a high priority. Suggestions have been made for energy storage in the form of fuel and chemicals. Currently, Solid Oxide Electrolysis systems can operate in endothermic mode and reduce the electrical requirement by supplying heat. Fuel synthesis from syngas is exothermic and can supply heat. However, the temperature mismatch in the normal operation of the electrolysis step and fuel synthesis step makes the direct utilization of this heat impossible. This work explores possibilities of alternate arrangements of coupling electrochemical systems and chemical synthesis. This work also explores …

Exploring Wellbore And Reservoir Temperature Profiles In Fluid Circulation And Production Operations, Ahmed Qasim Al Saedi

Doctoral Dissertations

"The wellbore heat flow occurs during different well operations resulting from any temperature differences between the wellbore fluid and the adjacent formation. Understanding the direction and mechanism of heat flow whether it is conduction or convection help to represent this heat exchange mathematically. However, the only available factor used to understand the heat flow behavior is the measured wellbore temperature which can be obtained from the direct measurement while drilling or circulation operations, well logging, well test, or from the production operations. Also, the initial geothermal formation temperature resulting from the geothermal gradient will help to understand the undistributed formation …

Experimental And Modeling Studies Using Packed Bed Reactors: Liquid Phase Ethylene Production By Hydrogenation Of Acetylene, Humayun Shariff

Doctoral Dissertations

"Gas-phase catalytic hydrogenation of acetylene to produce ethylene, commonly practiced in industries, has green oil formation, which leads to catalyst deactivation and sometimes reactor runaway risks due to high exothermicity. To overcome these issues as well as to increase the selectivity and conversion, liquid-phase hydrogenation of acetylene was investigated in packed bed reactors (PBR) using a commercial catalyst. The reactor performance of two-phase flow PBRs was assessed experimentally complemented by a validated mathematical model at different scales.

The selective hydrogenation of acetylene in the liquid phase over a commercial 0.5 wt% Pd/Al₂O₃ catalyst was investigated in a …

Polymeric Nanoparticle As A New Platform For High Removal Of Endotoxins From Biopharmaceutical Solutions, Sidharth Razdan

Doctoral Dissertations

"Presently, approximately one-third of all biopharmaceutical drugs are derived from biological sources like gram-negative bacteria. Gram-negative bacteria like E.coli are much cheaper to cultivate and provide higher biotherapeutic yield compared to mammalian cells. On extracting the useful biotherapeutics from the gram-negative bacterial cells (E.coli), endotoxin present in the bacteria is released in the surrounding media thus contaminating the lifesaving biotherapeutics. Application of the endotoxin-contaminated therapeutics to humans or animals can cause serious health issues like septic shock, tissue injury and ultimately death. Hence, thorough purification of biotherapeutics before parenteral application is necessary. Although there are multiple methods for …

Experimental Study On A Novel Eor Method -- Polymeric Nanogel Combined With Surfactant And Low Salinity Water Flooding To Enhance Oil Recovery, Mustafa M. Almahfood

Doctoral Dissertations

“Extracting higher amounts of oil from current reservoirs is a necessity for the oil industry to enhance their profitability and sustainability. The desire to recover more oil from the existing reservoirs has led to a growing interest of nanoparticle application in enhanced oil recovery (EOR). However, most researchers have focused on the evaluation and surface modification of non-deformable nanoparticles. This dissertation evaluates the potential of deformable nanogel particles as an EOR material when they are combined with two other promising technologies - surfactant and low salinity water floodings. The particle size distribution, ζ-potential and interfacial tension were measured for a …

An Integrated Wellbore Stability Study To Mitigate Expensive Wellbore Instability Problems While Drilling Into Zubair Shale/Sand Sequence, Southern Iraq, Ahmed Khudhair Abbas

Doctoral Dissertations

”The Zubair Formation is the most prolific reservoir in Iraq, which is comprised of sandstones interbedded with shale sequences. Due to the weak nature of the shale sequence, the instability of a wellbore is one of the most critical challenges that continuously appears during drilling across this formation. Historically, over 90% of wellbore problems in the Zubair Formation were due to wellbore instability. Problems associated with wellbore instability, such as tight hole, shale caving, stuck logging tools along with subsequent fishing, stuck pipe, and sidetracking result in increasing the non-productive time. This non-productive time has cost an enormous amount of …