Chemical Engineering Commons^™

Dеvеlоpmеnt Аnd Simulаtiоn Оf Аutоmаtiс Tеmpеrаturе Соntrоl Sуstеms Fоr Sоlаr Drуеrs, Sarvar Rejabov, Botir Shukurillayevich Usmonov, Komil Usmanov

Chemical Technology, Control and Management

Thе utilizаtiоn оf sоlаr еnеrgу in thе drуing оf аgriсulturаl prоduсts is соnsidеrеd signifiсаnt duе tо its еnеrgу еffiсiеnсу аnd еnvirоnmеntаl friеndlinеss. Hоwеvеr, trаditiоnаl drуing mеthоds fасе сhаllеngеs in mаintаining stаblе tеmpеrаturе аnd humiditу lеvеls, whiсh саn lеаd tо rеduсеd prоduсt quаlitу аnd dесrеаsеd prосеss еffiсiеnсу. Tо аddrеss thеsе issuеs, thе implеmеntаtiоn оf аutоmаtiс соntrоl sуstеms is еssеntiаl. In dеvеlоping аn аutоmаtiс tеmpеrаturе соntrоl sуstеm fоr sоlаr drуеrs, thе hеаt аnd mаss trаnsfеr prосеssеs wеrе prесisеlу mоdеlеd. Thе primаrу pаrаmеtеrs оf thе drуing prосеss, suсh аs prоduсt tеmpеrаturе аnd mоisturе соntеnt dуnаmiсs, wеrе еxprеssеd thrоugh mаthеmаtiсаl еquаtiоns. PID аnd Fuzzу …

Modeling Of Analog-To-Digital Converter In Signal Processing, Ravshan Aliev, A.U. Djalilov

Chemical Technology, Control and Management

This article is devoted to the study of the modeling process of analog-to-digital converters (ADCs) that process signals, one of the main parts of control system elements and devices. As we know, ADCs are an important part of modern control systems. During the research, the main stages of analog signal conversion were analyzed, i.e. discretization, quantization, coding. A classification of analog-to-digital conversion methods was made and the advantages and disadvantages of each were identified. Also, the characteristics and parameters of ADC were studied, their impact on ADCs performance was evaluated, and it was determined that certain characteristics should be taken …

Principles And Models Of Construction Of Linear Motion Actuators With Holonomic Structure For Intelligent Robot Movement, Matyokubov Nurbek Rustamovich, Temurbek Omonboevich Rakhimov, Yusupov Bekmurod Bayotovich

Chemical Technology, Control and Management

This article is devoted to the principles and models of building linear motion actuators with holonomic structure for the movement of intelligent robots. Also, the classification of the elements of the linear movement performance according to their interconnections and technical characteristics, taking into account their physical characteristics, was seen. A morphological matrix of the construction of holonomic structured linear motion performance elements based on the classification according to the considered technical specifications is presented. The given morphological matrix of linear motion actuators serves to develop new actuators for intelligent mechatronic and robotic systems. Based on the morphological matrix of the …

Application Of An Adaptive Neuro-Fuzzy Inference System To Control The Wastewater Treatment Process, Jaloliddin Abdurazzakovich Eshbobaev, Bakhodir Tajiddinovich Khamidov, Marcos Torices Fallanza

Chemical Technology, Control and Management

This study explores the application of an Adaptive Neuro-Fuzzy Inference System (ANFIS) for controlling wastewater treatment processes using ion-exchange resins. It addresses the critical challenges of water scarcity and pollution by enhancing the regulation of water hardness (H) and Total Dissolved Solids (TDS). Using a pilot laboratory device and experimental data from the mixed wastewater of the Kungrad Soda Plant in Uzbekistan, an ANFIS model was developed in MATLAB to automate process control. The model leverages water hardness and TDS as input parameters to regulate the water flow rate by servo valve opening degree, ensuring precise and efficient treatment. Compared …

Investigation Of The Parameters Of Semicylindrical Capacitive Sensor, Erkin Uljaev, Elyor Faxriddinovich Khudoyberdiev, Shohrukh Nurali O‘G‘Li Narzullayev

Chemical Technology, Control and Management

This study introduces a semicylindrical capacitive sensor, featuring an internal dielectric insulator, designed to measure moisture levels in bulk and other materials while in motion. The research employs numerical analysis to explore the sensor's capacitance variation and evaluate its performance. The change in capacitance of the semicylindrical capacitive sensor in the picofarad range is easily converted into a change in the frequency of the generator, which is implemented on an operational amplifier with feedback. The generator circuit is quite compact, and its output can be connected directly to the discrete input of a microcontroller without a matching element. Using the …

Experimental Study Of The Ultrasonic Extraction Process Of Plant Raw Materials, Azamat Bakir Ogli Usenov, Doston Ishmuxammat Ogli Samandarov, Qobil Akmal Ogli Mukhiddinov, Jasur Esirgapovich Safarov Dcs

Chemical Technology, Control and Management

In-depth scientific research is being conducted around the world aimed at developing the scientific and methodological foundations of energy-saving extractors, processing medicinal plants, increasing the efficiency of modern technologies, processes and equipment for obtaining high-quality pharmaceutical raw materials rich in biologically active substances. Energy-saving extractors, developed in conjunction with the extraction process of medicinal plants, are introduced into the industry using scientifically proven technology. At the global level, special attention is paid to the creation of intelligent designs of innovative extraction plants that operate using ultrasonic waves, allowing the extraction of medicinal components of plants.

Clustering Algorithm Based On Similarity Of Objects, Akhram Khasanovich Nishanov, Alisher Tulkunovich Tursunov, Fayzullo Farhod O'G'Li Ollamberganov

Chemical Technology, Control and Management

The article discusses the problem of drug clustering. Initially, k classes are randomly formed and the resulting training sample is preprocessed, then the similarity between objects of each class is assessed based on the proximity function and the criterion for assessing the contribution of objects to the formation of their own class. It is usually expressed as a percentage and represents the degree of mutual similarity of objects of each class. In the next steps of the algorithm, first one object is taken from the first class and by adding it to all k classes, the contribution of this object …

Capacitive Sensors With Ultra-Small Capacitance For Smart Measurement And Control Systems, Rustam Baratov, Farrux Jabbor O'G'Li Ko'charov

Chemical Technology, Control and Management

This article discusses methods of low capacitance measurement of capacitive sensors. The results of the study of the amplitude-frequency (AF) and phase-frequency (PF) response of measurement circuits of capacitive sensors for low capacitances measurement, consisting of RC - differentiating elements are presented. The input and output parameters of the differentiating circuit and the complex transfer function are analyzed. The research results show that low capacitances measurement by measuring the rectangular pulses duration is the most effective measurement method.

Synthesis Of A Control System For A Non-Stationary Dynamic Plant Based On A Regulator-Predictor, Isamiddin Hakimovich Siddikov, Begovot Sheraliyevich Ibragimov

Chemical Technology, Control and Management

The paper considers the issues of synthesizing a predictor controller as part of a control system for a non-stationary dynamic plant with a predictive model. Technological processes in industry, in essence, have non-stationarity properties, the parameters of which can change during the execution of technological operations. To control such nonstationary dynamic control plants, controllers built on the basis of predictive models have found wide application. The article is devoted to the issue of studying automatic control systems of a non-stationary dynamic plant with a base regulator-predictor. To synthesize a regulator - predictor, it is proposed to use a predictive model …

Developing Decision-Making Models And Algorithms To Help Prevent Emergencies, Mizaakbar Xakkulmirzayevich Hudayberdiyev, Oybek Zokirovich Koraboshev

Chemical Technology, Control and Management

The article is devoted to the solution of the scientific issue of decision-making support for the prevention and elimination of the consequences of emergency situations. The relevance of this issue is related to the need to develop a theoretical basis for optimizing the risk of adverse effects on human health and the environment in connection with emergency situations, and a predictive model for the development of emergency situations and their prevention or elimination of their consequences. The optimization of the importance measure of signs for predicting the values of the factors of fire conditions has been carried out. In addition, …

Mathematical Modelling Of The Solar Drying Of Apricot, Sarvar Rejabov, Botir Shukurillayevich Usmonov, Asqar Artikov, Komil Usmanov

Chemical Technology, Control and Management

Agricultural products provide significant growth in export earnings for many countries and provide food globally. Fruits and vegetables are perishable foods due to their high moisture content. Therefore, most agricultural products require post-harvest processing such as drying to extend the shelf life of fruits and vegetables and maintain nutrient quality. Solar drying is widely used for this purpose. Ambient temperature, humidity and solar radiation affect the drying time and quality of agricultural products, especially apricots, in solar dryers. The experiments were carried out in the same place (Tashkent, Uzbekistan) and in the same time interval. When the mass of apricots …

Review Of Fuzzy Models And Fuzzy Methods For Analysis Of Information In Conditions Of Emotional Decision Making, Latafat Gardashova, Royal Shirinov, Diana Boqdanova

Chemical Technology, Control and Management

In the modern world, decision-making often takes place in an environment of uncertainty and under the significant influence of emotional factors, which requires the use of special methods for analyzing information. This study is devoted to an overview of fuzzy models and methods that allow such factors to be taken into account when making decisions. In particular, the approaches based on fuzzy logic, fuzzy cognitive maps and fuzzy clustering methods that provide flexibility and adaptability in conditions of uncertainty are considered. The study analyzes examples of the application of these methods in various fields, including risk management, medical diagnostics and …

Algorithms And Models For Synthesis Of Elements Of Digital Information Systems, Odil Abdujalilovich Jumaev, M.T. Ismoilov, V.B. Pulatov, G.X. Rashidov

Chemical Technology, Control and Management

The development of algorithms for noise-tolerant and high-speed measurement systems involves an integrated approach that encompasses methods of data processing and transmission, as well as mechanisms for rapid response to changes. This paper presents the key principles and techniques used in such technologies. The information systems are thoroughly analyzed, including the use of signal processing techniques and their identification, filtering using various statistical techniques to determine signal parameters and the development of algorithms to analyze and classify signals. Critical aspects of the system such as performance, reliability, security and scalability are also evaluated. The paper discusses information system structures and …

Ultrasonic Flow Meter Calibration Via The Internet Using An Analog-To-Digital Converter, Aliev Ravshan, A.U. Djalilov

Chemical Technology, Control and Management

The purpose of scientific research work is remote control of improving the metrological properties of the water flow measuring device. Therefore, the Arduino platform with an additional ESP8266 NodeMcu v3 and analog-to-digital converter, module was installed in the scientific article for automatic calibration/checking of ultrasonic flow meters used in irrigation networks. The module is integrated into a 32-bit microcontroller with low power consumption. The ESP8266 NodeMcu v3 module operates at 80 and 160 MHz clock frequencies, supports real-time operating system (RTOS), built-in Wi-Fi, and has a microstrip antenna on board. Through this, the data exchange between the computing equipment and …

Research Of The Fuzzy Control System For Adjusting Thread Tension During The Warping Process, To'xtamurod Hayitmurodovich Avezov, Zokhid Ergashboyevich Iskandarov

Chemical Technology, Control and Management

The paper considered issues of research into a fuzzy control system for the warping process. During the warping process, the reasons that cause defects in the final finished product have been studied, firstly (remove this word) which are thread breakage, thread tangling, the formation of loops on or under the belt, hanging loose threads and similar factors. To study the warping process, its mathematical model is constructed. Kinematic parameters of stationary movement corresponding to the equilibrium mode were determined by solving the nonlinear functional matrix - equation of movement. The process of breakage the warp of the threads under oscillation …

Research Of A New Technological Flowsheet Parameters For Uranium Mining From Technogenic Uranium Ores, Nazarov Jamol, G.M. Allaberganova, H.L. Pulatov, A.M. Muzafarov

Chemical Technology, Control and Management

This paper presents the results of a study of the parameters of a new technological scheme for the extraction of uranium from technogenic uranium ores. The results of the analytical determination of the concentration of parent - ²³⁸U and daughter radionuclides - ²³⁴U , ²³⁰Th , ²²⁶Ra , ²²²Rn , ²¹⁸Pa , ²¹⁴Pb , etc. are presented . in the studied technogenic uranium ores. The principal scheme of the new uranium extraction technology from technogenic uranium ores is presented. The use of the classifier in a new scheme for separating granules of technogenic …

Assessment Of Metrological Errors Of Recognition Metrics In The Intelligent Control And Regulation System Of The Cotton Harvesting Machine, Erkin Uljaev, Utkirjon Murodillaevich Ubaydullaev, Azizjon Abdulla Ugli Abdulhamidov

Chemical Technology, Control and Management

This article presents a method for assessing the error of metrics of an intelligent system for monitoring and regulating the width of the working gap of the harvesting apparatus of a cotton picker. To assess the error, the calculation of the average value of the standard deviation of metrics, absolute systematic and random errors, as well as absolute and relative total errors are used. The results of these calculations will allow us to determine the accuracy of the recognition system and opportunities for its improvement.

Environmental Monitoring And Control System Of Greenhouse Based On Internet Of Things Technology, Ru Jiang, Nadirbek Yusupbekov

Chemical Technology, Control and Management

Greenhouse is an important application scene of modern agriculture. In this paper, a set of greenhouse environmental monitoring, facility remote control and production management system is designed and implemented based on Internet of Things technology for the development needs of modern agriculture in greenhouse. The system selects STM32F407 control board as the main controller to realize real-time monitoring of greenhouse environmental parameters including temperature and humidity, soil nutrients, soil pH and other greenhouse environmental information, and can adjust greenhouse environmental parameters by controlling the irrigation system, roller shutters, fans, shading curtains and other facilities in the greenhouse. The main controller …

Structural And Parametric Identification Of Recycling Systems, Khusan Igamberdiev, Madina Mirxalilovma Fozilova

Chemical Technology, Control and Management

The issue of identifying recirculation systems with a specific control loop, in which information and control information about various technological processes circulate, is being considered. A methodology for identifying recirculation systems has been developed, based on algorithms for structural identification of the model based on the results of assessing the sensitivity of the optimum of control parameters and a fuzzy inference algorithm based on production rules that contribute to solving the problem of parametric identification.

Synthesis Of An Adaptive Neuro-Fuzzy Control System For Steam Generator Temperature, Isomiddin Xakimovich Siddikov, Dilnoza Maxamadjanovna Umurzakova

Chemical Technology, Control and Management

This paper is devoted to the modeling and synthesis of an adaptive neuro-fuzzy control system for steam generator temperature. Temperature control systems play an important role in industry because accurate and stable control is a prerequisite for the efficient operation of steam systems. Traditional control methods based on mathematical models and fixed parameter controllers may have limitations in providing optimal performance and adapting to changing operating conditions. The paper proposes a synthesized system combining fuzzy logic and adaptation methods to achieve more accurate and stable temperature control. A detailed structural diagram of the system, modeling, and tuning methods are presented. …

Decision-Making Algorithms For Drilling Instrument Control Systems, Fuzayl Fozil Ugli Odilov

Chemical Technology, Control and Management

The control of the movement of the drilling tool and the structure of the well are considered. An effective control algorithm for drilling systems that provides control of well trajectory parameters is analyzed. In technological processes, it is necessary to control several parameters or several systems at the same time. It is considered necessary to create decision-making algorithms for the formation of managerial effects for the control system of such technological processes. The controlled oriented type of the bottom of the drill string was analyzed. Work was carried out on the decision-making algorithm for the processing of control effects. The …

Synthesis Of Local Control Systems For Underwater Units Cleaning Bottom Sediments In Reservoirs, Yuriy Gennadiyevich Shipulin, Zebiniso Akmalovna Zayniddinova

Chemical Technology, Control and Management

The article discusses the issues of synthesizing local control systems for underwater units for cleaning bottom sediments in reservoirs. It is shown that the protection and rational use of natural reservoirs and the fight against their premature siltation is becoming an urgent task.

It is proposed to use small-sized underwater units, consisting of information and measuring devices, to carry out search work for cleaning bottom sediments under water; control systems; actuators and means of communication with humans.

It is shown that the task of controlling the loading of an underwater unit (UU) requires maintaining optimal performance while simultaneously taking into …

Modernization Of Water Flow Measurement In Open Irrigation Systems Using The Slope-Area Method, R.M. Aliev, Djalilov Anvar

Chemical Technology, Control and Management

This article describes two methods for determining water flow in open irrigation systems: “speed - area” and “slope - area”. The authors considered the problem of its modernization using the existing method for determining water flow “slope - area” in open irrigation systems. The essence of the issue is the remote transfer of parameters necessary for calculating water flow in open irrigation systems and improving the means of their processing. In scientific studies conducted by the authors, the required hydraulic parameters were studied using the “slope - area” and “speed - area” water flow methods. Based on experimentally obtained data, …

Synthesis Algorithm Of Control System Based On Neural Network For The Gas And Oil Process, Jasur Sevinov, Abdishukurov Maqsudovich Shavkat, A.Z. Shodiyorov

Chemical Technology, Control and Management

Automatic control systems in the oil and gas processing are considered. After extraction of natural gas condensate, management of technological parameters plays an important role in its processing. Among the parameter of regulating algorithms, control based on neural network technology was considered. These control systems are created on the basis of algorithms of neural network technology. There are several structures of neural networks according to their structure. Differences in the process of information processing of these branching structures are considered.

Improving Technology For Producing Complex Fertilizer From Low-Grade Phosphorites Of The Central Kyzylkum, A.Zh. Allamuratova, A.U. Erkaev, A.M. Reimov, Saparbay Kazakhbaev, Dilshodbek Kurbiyazov

Chemical Technology, Control and Management

The methods of nitric acid processing of phosphate raw materials are analyzed. A technology has been developed for the nitric acid processing of phosphate raw materials into nitrogen-phosphorus fertilizer with the implementation of the process in a condensed pulp by adding sulfuric acid. A technology for producing complex fertilizers with a wide range of N:P₂O₅:K₂O ratios with improved physico-chemical parameters due to the introduction of various potassium salts into the process is proposed.

Dynamic Characteristics Of Magnetoelectric Linear Actuators Of Control Systems, Мakhmudjon Muxamedovich Аbdullayev, Rasul Ernazar Ogli Abdiev

Chemical Technology, Control and Management

This paper presents the results of studies carried out on magnetoelectric drives that carry out linear movement, models of drives are built and, on their basis, studies of the main indicators associated with the movement of a linear armature are carried out, such as: speed of movement, acceleration, current values, voltage and traction force of the armature. Also presented are the results of a study of magnetoelectric linear motion drives based on an analysis of graphs of their dynamic characteristics.

Algorithms For Structural Synthesis Of Control Systems For Dynamic Objects Under Conditions Of Unmeasurable Disturbances, Husan Zakirovich Igamberdiev, Uktam Farkhodovich Mamirov, Bunyod Mamurjon Ugli Buronov

Chemical Technology, Control and Management

The paper talks about ways to use inverse dynamic models to structure a control system for moving objects when disturbances are not measured. To solve the main problems that arise when implementing the inverse dynamic model method, methods for synthesizing inverse systems with given dynamic characteristics are used. The solution to this problem is obtained based on the theory that dynamic observers are invariant to unmeasured input influences. We broke down the matrix operator on the right into elementary orthogonal rotation matrices and on the left into permutation matrices to get a stable answer to the equation of the current …

Artificial Neural Network Based Grain Moisture Measuring Device, Erkin Eljaev, Shohrux Nurali O‘G‘Li Narzullayev, Elyor Faxriddinovich Khudoyberdiev

Chemical Technology, Control and Management

To date, the intellectualization of solving technical issues in managing, controlling, and measuring technological processes in all branches of industrial production is considered an urgent task. In this regard, a class of intelligent devices and sensors has emerged. Intelligent devices and sensors differ from their analog counterparts in that they have functions such as automatic adjustment of the measurement range, self-calibration, data processing, and decision-making. The article discusses the development of intelligent measuring instruments based on a capacitive transducer for measuring the moisture content of grain and grain products.

Identification Of Faults In Highways Using Approximation Methods And Algorithms, Khudayberdiyev Khakkulmirzayevich Mirzaakbar, Anvar Asatilloyevich Ravshanov

Chemical Technology, Control and Management

Many fast Fourier transforms are used to identify defective parts of uneven surfaces on roads and send information to relevant organizations on the road, using the " RAVON YO‘LLAR" application installed on a mobile device during car movement. We determine the uneven parts of the road. Smooth and well-maintained roads reduce the risk of vehicle collisions, skidding and other road-related incidents. Timely measures contribute to overall safety, comfort and economic efficiency.

Analytical-Critical Review Of Widely Used Industrial Devices For Drying Mineral Fertilizers, Djalolitdin Paxritdinovich Mukhitdinov, Aleksey Viktorovich Schulz

Chemical Technology, Control and Management

The article is devoted to the review of the modern state of research in the mineral fertilizers drying field, critical analysis and comparison of widely used drying apparatuses. There are procedures of preliminary equipment selection for soluble fertilizers industrial drying on the basis of such criteria as productivity, efficiency, energy saving, environmental impact degree, indicating the possible advantages and disadvantages of different application variants.