Chemical Engineering Commons^™

Sulfur Resistance Of Ce-Mn/Tio2 Catalysts For Low-Temperature Nh3–Scr, Quan Xu, Wenjing Yang, Jason Street, Yan Lou

Faculty & Staff Scholarship

Ce-Mn/TiO2 catalyst prepared using a simple impregnation method demonstrated a better low-temperature selective catalytic reduction of NO with NH3 (NH3–SCR) activity in comparison with the sol-gel method. The Ce-Mn/TiO2 catalyst loading with 20% Ce had the best low-temperature activity and achieved a NO conversion rate higher than 90% at 140–260°C with a 99.7% NO conversion rate at 180°C. The Ce-Mn/TiO2 catalyst only had a 6% NO conversion rate decrease after 100ppm of SO2 was added to the stream. When SO2 was removed from the stream, the catalyst was able to recover completely. The crystal structure, morphology, textural properties and valence …

Catalytic Fast Pyrolysis Of Kraft Lignin Over Hierarchical Hzsm-5 And Hβ Zeolites, Yadong Bi, Xiaojuan Lei, Guihua Xu, Hui Chen, Jianli Hu

Faculty & Staff Scholarship

The hierarchical HZSM-5 and Hβ zeolites were prepared by alkaline post-treatment methods adopting Na2CO3, TMAOH/NaOH mixture, and NaOH as desilication sources, respectively. More mesopores are produced over two kinds of zeolites, while the micropores portion is well preserved. The mesopores formed in hierarchical Hβ zeolites were directly related to the basicity of the alkaline solution, indicating that Hβ zeolite is more sensitive to the alkaline post-treatment. The hierarchical HZSM-5 and Hβ zeolites are more active than the parent one for catalytic fast pyrolysis (CFP) of Kraft lignin. Hierarchical zeolites retained the function of acid catalysis, while additionally creating larger mesopores …

Development Of A Dynamic Model And Control System For Load-Following Studies Of Supercritical Pulverized Coal Power Plants, Parikshit Sarda, Elijah Hedrick, Katherine Reynolds, Debangsu Bhattacharyya, National Energy Technology Laboratory

Faculty & Staff Scholarship

Traditional energy production plants are increasingly forced to cycle their load and operate under low-load conditions in response to growth in intermittent renewable generation. A plant-wide dynamic model of a supercritical pulverized coal (SCPC) power plant has been developed in the Aspen Plus Dynamics® (APD) software environment and the impact of advanced control strategies on the transient responses of the key variables to load-following operation and disturbances can be studied. Models of various key unit operations, such as the steam turbine, are developed in Aspen Custom Modeler® (ACM) and integrated in the APD environment. A coordinated control system (CCS) is …

Formation And Regeneration Of Shape-Selective Zsm-35 Catalysts For N‐Butene Skeletal Isomerization To Isobutene, Quan Xu, Wenjing Yang, Zhiwei Chen, Yingchun Ye, Yan Luo, Jason Street, Hongjun Zhou, Chunming Xu

Faculty & Staff Scholarship

Skeletal isomerization of n-butene to isobutene was performed over formed ZSM-35 zeolites in a lab-scale, fixed-bed reactor. The formation conditions to produce isobutene with zeolites were varied to determine the most advantageous binding agent (pseudo-boehmite) amount and steam dealumination conditions. The optimal binding agent amount was 20 wt %. Steam dealumination stabilized the catalysts and enhanced the catalytic performance because of the stable Si/Al framework and suitable acidity. The optimized process conditions involved a reaction temperature of 410 °C, a weight hourly space velocity of 5 h−1, and an n-butene concentration in feedstock of 50%. After being on-stream for 296 …

Photoluminescence Mechanism And Applications Of Zn-Doped Carbon Dots, Quan Xu, Wei Cai, Miaoran Zhang, Yingchun Ye, Yeqing Li, Lipeng Zhang, Yongjian Guo, Zhiqiang Yu, Siyu Li, Xun Lin, Yusheng Chen, Yan Lou, Jason Street, Meng Xu

Faculty & Staff Scholarship

Heteroatom-doped carbon dots (CDs) with excellent optical characteristics and negligible toxicity have emerged in many applications including bioimaging, biosensing, photocatalysis, and photothermal therapy. The metal-doping of CDs using various heteroatoms results in an enhancement of the photophysics but also imparts them with multifunctionality. However, unlike nonmetal doping, typical metal doping results in low fluorescence quantum yields (QYs), and an unclear photoluminescence mechanism. In this contribution, we detail results concerning zinc doped CDs (Zn-CDs) with QYs of up to 35%. The zinc ion charges serve as a surface passivating agent and prevent the aggregation of graphene p–p stacking, leading to an …

Face Size Biases Emotion Judgment Through Eye Movement, Shuo Wang

Faculty & Staff Scholarship

Faces are the most commonly used stimuli to study emotions. Researchers often manipulate the emotion contents and facial features to study emotion judgment, but rarely manipulate low-level stimulus features such as face sizes. Here, I investigated whether a mere difference in face size would cause differences in emotion judgment. Subjects discriminated emotions in fear-happy morphed faces. When subjects viewed larger faces, they had an increased judgment of fear and showed a higher specificity in emotion judgment, compared to when they viewed smaller faces. Concurrent high-resolution eye tracking further provided mechanistic insights: subjects had more fixations onto the eyes when they …

Single-Site Catalyst Promoters Accelerate Metal- Catalyzed Nitroarene Hydrogenation, Liang Wang, Erjia Guan, Jian Zhang, Junhao Yang, Yihan Zhu, Yu Han, Ming Yang, Cheng Cen, Gang Fu, Bruce C. Gates, Feng-Shou Xiao

Faculty & Staff Scholarship

Atomically dispersed supported metal catalysts are drawing wide attention because of the opportunities they offer for new catalytic properties combined with efficient use of the metals. We extend this class of materials to catalysts that incorporate atomically dispersed metal atoms as promoters. The catalysts are used for the challenging nitroarene hydro- genation and found to have both high activity and selectivity. The promoters are single-site Sn on TiO2 supports that incorporate metal nanoparticle catalysts. Represented as M/Sn- TiO2 (M = Au, Ru, Pt, Ni), these catalysts decidedly outperform the unpromoted supported metals, even for hydrogenation of nitroarenes substituted with various …

Apple Pomace Consumption Favorably Alters Hepatic Lipid Metabolism In Young Female Sprague-Dawley Rats Fed A Western Diet, Roy Chris Skinner, Derek C. Warren, Soofie N. Lateef, Vagner A. Benedito, Janet C. Tou

Faculty & Staff Scholarship

Apple pomace, which is a waste byproduct of processing, is rich in several nutrients, particularly dietary fiber, indicating potential benefits for diseases that are attributed to poor diets, such as non-alcoholic fatty liver disease (NAFLD). NAFLD affects over 25% of United States population and is increasing in children. Increasing fruit consumption can influence NAFLD. The study objective was to replace calories in standard or Western diets with apple pomace to determine the effects on genes regulating hepatic lipid metabolism and on risk of NAFLD. Female Sprague-Dawley rats were randomly assigned (n = 8 rats/group) to isocaloric diets of AIN-93G and …

Applications Of Cellular Components In Engineered Environments, Xiao Hu

Graduate Theses, Dissertations, and Problem Reports (ETD)

Manipulation of cellular components in synthetic environment has attracted interest for applications ranging from sensors to nanelectronics and from catalysis to biomedical devices. In such applications, biological-based processes such as specific recognition and self-assembly direct the formation of hierarchical structures, all at minimum energetic costs, with high efficiency and reliability.

Among such cellular machines, microtubules and kinesins have attracted special interest. Inside the cells, microtubules are giving structural integrity while serving as regular and uniform tracks for transport of vesicles or organelles. Kinesin uses a microtubule track in vivo to progress to specific locations with processive and coordinated steps, all …

Investigation Of Combustion Characteristics Of A Heavy-Duty Diesel Engine Retrofitted To Natural Gas Spark Ignition Operation, Jinlong Liu

Graduate Theses, Dissertations, and Problem Reports (ETD)

The conversion of existing diesel engines to natural-gas spark ignition operation by adding a gas injector in the intake manifold for fuel delivery and replacing the diesel fuel injector with a spark plug to initiate and control the combustion process can reduce U.S. dependence on petroleum imports and curtail engine-out emissions. As the conventional diesel combustion chamber (i.e., flat head and bowl-in-piston) creates high turbulence, the engine can operate leaner, which would increase its efficiency and reduce emissions. However, natural gas combustion in such retrofitted engines presents differences compared to that in conventional spark ignited engines. Subsequently, the main goal …

Using Artificial Intelligence And Machine Learning To Develop Synthetic Well Logs, Marwan Mohammed Alnuaimi

Graduate Theses, Dissertations, and Problem Reports (ETD)

There has been an increase in the need for energy in the recent past. Oil and gas stand as the source of energy that are widely used. The oil and gas reservoirs are targeted for the purposes of field development. The conventional methods of reservoir characteristics require computing techniques that are unique and complex, some of which are labor and time intensive. Mohaghegh argues that all efforts must be tried and made possible to apply Petroleum Data analytics in production and management of reservoir so as to earn a maximum return (Mohaghegh, Shale Analytics, 2017). Different methodologies have been applied …

Analysis Of The Production Data From Marcellus Shale Wells, Amanda Parrish

Graduate Theses, Dissertations, and Problem Reports (ETD)

The increasingly prevalent practice of unconventional technologies has called for the need for the critical analysis of production decline rates to meet economic targets. The high early time production returns and transient flow make matching a production curve to known methods of decline curve analysis problematic.

This research focuses on finding a technique that best fits a known production curve and then applying that technique to another well to check its accuracy. The goal is to find the earliest time of production data necessary to predict an accurate production curve over the lifespan of the well. This is essential to …

Dynamic Model And Estimator Development For A Smart Refractory Brick With Embedded Wireless Sensors For Gasifier Applications, Qiao Huang

Graduate Theses, Dissertations, and Problem Reports (ETD)

The operating temperature is one of the most important variables for gasifier operation. A higher temperature can shorten the service life of the refractory lining. A lower temperature can reduce the extent of carbon conversion and disrupt the flow of molten slag in a slagging gasifier. Therefore temperature is one of the most important variable in a gasifier. In slagging gasifiers, molten slag can penetrate into the refractory lining leading to refractory spallation, undesired downtime, and costly replacement. Even though the temperature and extent of slag penetration are extremely important for the gasifier operation, they cannot be measured reliably by …

Development Of Chemical Process Design And Control For Sustainability, Shuyun Li, Gaurav Mirlekar, Gerardo J. Ruiz-Mercado, Fernando V. Lima

Faculty & Staff Scholarship

This contribution describes a novel process systems engineering framework that couples advanced control with sustainability evaluation for the optimization of process operations to minimize environmental impacts associated with products, materials and energy. The implemented control strategy combines a biologically-inspired method with optimal control concepts for finding more sustainable operating trajectories. The sustainability assessment of process operating points is carried out by using the U.S. EPA’s Gauging Reaction Effectiveness for the ENvironmental Sustainability of Chemistries with a multi-Objective Process Evaluator (GREENSCOPE) tool that provides scores for the selected indicators in the economic, material efficiency, environmental and energy areas. The indicator scores …

Modeling And Optimization Of High-Performance Polymer Membrane Reactor Systems For Water–Gas Shift Reaction Applications, Andrew J. Radcliffe, Rajinder P. Singh, Kathryn A. Berchtold, Fernando V. Lima

Faculty & Staff Scholarship

In production of electricity from coal, integrated gasification combined cycle plants typically operate with conventional packed bed reactors for the water-gas shift reaction, and a Selexol process for carbon dioxide removal. Implementation of membrane reactors in place of these two process units provides advantages such as increased carbon monoxide conversion, facilitated CO2 removal/sequestration and process intensification. Proposed H2-selective membranes for these reactors are typically of palladium alloy or ceramic due to their outstanding gas separation properties; however, on an industrial scale, the cost of such materials may become exorbitant. High-performance polymeric membranes, such as polybenzimidazoles (PBIs), present themselves as low-cost …