Chemical Engineering Commons^™

Microalgae Immobilization With Filamentous Fungi: Process Development For Sustainable Food Systems, Suvro Talukdar

Theses and Dissertations--Biosystems and Agricultural Engineering

Demand for sustainable food sources has increased because of the rapid growth of the world's population.  In this study, microalgae cells of Haematococcus pluvialis were immobilized using the edible fungal strain Aspergillus awamori for potential food applications. The study investigated the impact of fungal loading, pellet geometry, and initial microalgae cell concentration on the immobilization performance and product characteristics. It was found that higher fungal loading and larger fungal pellets contributed to increased immobilization performance while increased initial microalgae concentration inhibited the process. Larger fungal pellets had decreased biomass density, which led to decreased surface concentration of immobilized microalgae but …

Computational Investigation Of A Series Of Small Molecules As Potential Compounds For Lysyl Hydroxylase-2 (Lh2) Inhibition, Yazdan Maghsoud, Erik Antonio Vázquez-Montelongo, Xudong Yang, Chengwen Liu, Zhifeng Jing, Juhoon Lee, Matthew Harger, Ally K. Smith, Miguel Espinoza, Hou-Fu Guo, Jonathan M. Kurie, Kevin N. Dalby, Pengyu Ren, G. Andrés Cisneros

Markey Cancer Center Faculty Publications

The catalytic function of lysyl hydroxylase-2 (LH2), a member of the Fe(II)/αKG-dependent oxygenase superfamily, is to catalyze the hydroxylation of lysine to hydroxylysine in collagen, resulting in stable hydroxylysine aldehyde-derived collagen cross- links (HLCCs). Reports show that high amounts of LH2 lead to the accumulation of HLCCs, causing fibrosis and specific types of cancer metastasis. Some members of the Fe(II)/αKG-dependent family have also been reported to have intramolecular O2 tunnels, which aid in transporting one of the required cosubstrates into the active site. While LH2 can be a promising target to combat these diseases, efficacious inhibitors are still lacking. We …

Development Of Polymeric Sorbents As Reusable Filtration Systems For Remediation Of Pfas Contaminated Water, E. Molly Frazar

Theses and Dissertations--Chemical and Materials Engineering

Decades of use of per- and polyfluoroalkyl substances (PFAS) in a multitude of consumer and industry-based products have led to a devastating amount of soil and water contamination. Although these chemicals and compounds possess advantageous qualities – such as that of PFAS in the role of fire-fighting foams that have no doubt saved countless lives and homes, we must take responsibility for the anthropogenic hazards that threaten our global health. This entails being able to cost-effectively remediate problems created in the past from overuse of toxic substances that could negatively impact our future, and in this case, the future of …

Mechanical And Adhesive Properties Of Supramolecular, Mussel-Inspired Hydrogels, Daniel Darby

Theses and Dissertations--Chemical and Materials Engineering

The exceptional mechanical and adhesive properties of mussel byssal threads come from supramolecular interactions of ligands found in the proteins comprising them. Ligands can form hydrophobic interactions, π-π stacking interactions, and hydrogen bonds, but the strongest supramolecular interaction they demonstrate is metal-ligand coordination. Specifically, Histidine (His-) and nitrodopamine (nDOPA) ligands coordinate to metals in a bidentate fashion and take on tris-, bis-, and mono- modalities (3, 2, or 1 ligand per ion, respectively). The distribution of these modalities is controlled by equilibrium thermodynamics. These same ligands can be used as crosslinks in supramolecular hydrogel networks. Supramolecular hydrogel networks are dissipative, …

Molecular Understanding Of Zwitterions And Quantum Computing For Sustainability, Manh Tien Nguyen

Theses and Dissertations--Chemical and Materials Engineering

The sustainable development of society needs sustainable energy solutions and the mitigation of greenhouse gas emissions. One key subject in this area is the development of safe and efficient ion-based batteries. Moreover, CO₂ capture is a crucial pathway in mitigating emissions from the combustion of fossil fuels. Ongoing efforts are to improve both technologies' safety and efficiency. This thesis presents our efforts to conduct computational research on understanding advanced zwitterionic electrolytes and CO₂ capture. Chapters 2-4 illustrate the computational research to understand ionic solvation in zwitterionic electrolytes. Solid-state electrolytes are essential for safer batteries. While solid polymer electrolytes …

Developing And Modeling Tunable Nanofiltration And Functionalized Membranes For The Separation Of Organics And Inorganics From Water: Per- And Polyfluoroalkyl Substances, Lanthanides, And More, Francisco Cecil Leniz-Pizarro

Theses and Dissertations--Chemical and Materials Engineering

In a world where clean water predictability is challenged by both global warming and the contamination of our natural resources, it is our responsibility to advance water separation technologies into more efficient processes and to lessen their environmental footprint. Pore and surface functionalization of membranes can enhance the separation of ions from water and even help overcome intrinsic challenges that some current separation technologies possess. If we begin with a complete fundamental understanding of the nanoscale interactions that occur in the process of separating ions from water, then we can engineer new functionalized composite membranes to provide alternative processes keeping …

Leveraging Cell-Substrate Adhesion And Cell Migratory Properties In Skeletal Muscle Constructs And Cancer Metastasis Assays, Lauren E. Mehanna

Theses and Dissertations--Chemical and Materials Engineering

Volumetric muscle loss (VML) remains one of the few skeletal muscle injuries without a reliable and repeatable treatment. In large volume muscle injuries, muscle fibers as well as the surrounding connective tissue are damaged, preventing therapeutic muscle stem cells, called myogenic progenitor cells (MPCs), from reaching the injury site and initiating repair. There is a clinical need to rapidly fabricate in vitro muscle tissue constructs that mimic the native tissue organization, with aligned myotubes, for insertion and integration at the patient’s injury site. In this dissertation, we utilize the MPC’s natural propensity to close gaps across an injury site to …

Effect Of Hydrogen Sulfide Content On The Combustion Characteristics Of Biogas Fuel In Homogenous Charge Compression Ignition Engines, Mohammad Alrbai, Adnan Darwish Ahmad, Sameer Al-Dahidi, Ahmad M. Abubaker, Loiy Al-Ghussain, Hassan S. Hayajneh, Nelson Akafuah

Institute of Research for Technology Development Faculty Publications

The use of biogas fuel in homogeneous charge compression ignition (HCCI) engines has been promoted recently due to the environmental advantages. However, hydrogen sulfide (H2 S) forms a non-environment friendly content and biogas impurity that its removal is associated with high costs. In this study, the effect of using biogas fuel in the HCCI engines under different operating conditions is investigated to shed light on the best scenarios of biogas combustion, even with the presence of H2S contents. A modified reaction mechanism is introduced by considering the re- actions of H2 S with other species in the air-fuel mixture. The …

Scale Modeling Of An Appearance Of Downwash Pattern Of Hot Smoke Ejected From Chimney In The Turbulent Cross Flow, Xangpheuak Inthavideth, Nobumasa Sekishita, Sounthisack Phommachanh, Yuji Nakamura

Progress in Scale Modeling, an International Journal

This study aims to elucidate the scaling law to provide the critical condition on appearance of the downwash pattern of the hot smoke ejected from a chimney in a turbulent cross flow. A specially designed wind tunnel with an active turbulence generator developed by Makita was adopted to offer a quasi-isotropic turbulence field in a lab-scale test facility. A heated jet with smoke is issued into the cross flow from the vertically oriented chimney placed in the test section of the wind tunnel. In this study, the experimental parameters considered are temperature of the heated jet (smoke), jet ejected velocity, …

A Cfd-Based Scaling Analysis On Liquid And Paint Droplets Moving Through A Weak Concurrent Airflow Stream, Masoud Arabghahestani, Nelson Akafuah, Tianxiang Li, Kozo Saito

Progress in Scale Modeling, an International Journal

We conducted volume of fluids (VOF) multiphase model numerical simulations to obtain the interaction among all the major governing forces identified in our previous paper. Our numerical experiments are intended to assess the droplet generation process and the jetting behavior by providing specific input conditions, offering CFD as a tool to study scaling correlations instead of physical experiments. Water droplets that can represent waterborne paints were generated by piezo-generated sinusoidal waveforms at the inlet of the nozzle. The governing forces included the external piezo-based wave-generation force, the inertial force of droplets, the inertial force of air, the viscose force of …

Non-Solvent Induced Phase Separation (Nips) For Fabricating High Filtration Efficiency (Fe) Polymeric Membranes For Face Mask And Air Filtration Applications, Ebuka A. Ogbuoji, Lauren Stephens, Amber Haycraft, Eric Woodridge, C. Escobar

Chemical and Materials Engineering Faculty Publications

Protection against airborne viruses has become very relevant since the outbreak of SARSCoV-2. Nonwoven face masks along with heating, ventilation, and air conditioning (HVAC) filters have been used extensively to reduce infection rates; however, some of these filter materials provide inadequate protection due to insufficient initial filtration efficiency (FE) and FE decrease with time. Flat sheet porous membranes, which have been used extensively to filter waterborne microbes and particulate matter due to their high FE have the potential to filter air pollutants without compromising its FE over time. Therefore, in this study, single layer polysulfone (PSf) membranes were fabricated via …

Aerosol Capture And Coronavirus Spike Protein Deactivation By Enzyme Functionalized Antiviral Membranes, Rollie Mills, Ronald J. Vogler, Matthew Bernard, Jacob Concolino, Louis B. Hersh, Yinan Wei, Jeffrey Todd Hastings, Thomas D. Dziubla, Kevin C. Baldridge, Dibakar Bhattacharyya

Chemical and Materials Engineering Faculty Publications

The airborne nature of coronavirus transmission makes it critical to develop new barrier technologies that can simultaneously reduce aerosol and viral spread. Here, we report nanostructured membranes with tunable thickness and porosity for filtering coronavirus-sized aerosols, combined with antiviral enzyme functionalization that can denature spike glycoproteins of the SARS-CoV-2 virus in low-hydration environments. Thin, asymmetric membranes with subtilisin enzyme and methacrylic functionalization show more than 98.90% filtration efficiency for 100-nm unfunctionalized and protein-functionalized polystyrene latex aerosol particles. Unfunctionalized membranes provided a protection factor of 540 ± 380 for coronavirus-sized particle, above the Occupational Safety and Health Administration’s standard of 10 …

Rapid Removal Of Pfoa And Pfos Via Modified Industrial Solid Waste: Mechanisms And Influences Of Water Matrices, Hongyi Wan, Rollie Mills, Kai Qu, James C. Hower, M. Abdul Mottaleb, Dibakar Bhattacharyya, Zhi Xu

Chemical and Materials Engineering Faculty Publications

Emerging perfluoroalkyl and polyfluoroalkyl substances contaminate waters at trace concentrations, thus rapid and selective adsorbents are pivotal to mitigate the consequent energy-intensive and time-consuming issues in remediation. In this study, coal combustion residuals-fly ash was modified (FA-SCA) to overcome the universal trade-off between high adsorption capacity and fast kinetics. FA-SCA presented rapid adsorption (teq = 2 min) of PFOX (perfluorooctanoic acid and perfluorooctanesulfonic acid, collectively), where the dynamic adsorption capacity (qdyn = qm/teq) was 2–3 orders of magnitude higher than that of benchmark activated carbons and anion-exchange resins. Investigated by advanced characterization and kinetic models, the fast kinetics and superior …

Strategy For Conjugating Oligopeptides To Mesoporous Silica Nanoparticles Using Diazirine-Based Heterobifunctional Linkers, Md Arif Khan, Ramy W. Ghanim, Maelyn R. Kiser, Mahsa Moradipour, Dennis T. Rogers, John M. Littleton, Luke H. Bradley, Bert C. Lynn, Stephen E. Rankin, Barbara L. Knutson

Chemical and Materials Engineering Faculty Publications

Successful strategies for the attachment of oligopeptides to mesoporous silica with pores large enough to load biomolecules should utilize the high surface area of pores to provide an accessible, protective environment. A two-step oligopeptide functionalization strategy is examined here using diazirine-based heterobifunctional linkers. Mesoporous silica nanoparticles (MSNPs) with average pore diameter of ~8 nm and surface area of ~730 m²/g were synthesized and amine-functionalized. Tetrapeptides Gly-Gly-Gly-Gly (GGGG) and Arg-Ser-Ser-Val (RSSV), and a peptide comprised of four copies of RSSV (4RSSV), were covalently attached via their N-terminus to the amine groups on the particle surface by a heterobifunctional linker, …

Lignin Valorization Via Reductive Depolymerization Using Promoted Nickel Catalysts And Sub- And Supercritical Methanol, Julia Parker

Theses and Dissertations--Biosystems and Agricultural Engineering

While lignin has been regarded as the most promising renewable feedstock for the sustainable manufacture of aromatic compounds, lignin valorization is necessary to improve the economic viability of biorefineries. Reductive catalytic fractionation (RCF), which combines delignification and lignin depolymerization into a single stage while maintaining the structure and integrity of the cellulose component, has evolved as an effective method for processing biomass. The ability of Cu and Fe to promote the performance of a 20% Ni/alumina catalyst when converting native lignin to alkylphenols by RCF in sub- and supercritical methanol was tested. The effectiveness of lignin extraction as measured by …

Versatile Functionalization Strategy For The Capture Of Antibodies Using Silica Nanoparticles, Sayma Afrin

Theses and Dissertations--Chemical and Materials Engineering

In this work, the synthesis of protein-functionalized nonporous silica nanoparticles and their application to capture antibodies was demonstrated. Silica nanoparticles were chosen as they offered particle and pore size tunability, low toxicity, thermal stability, ease of synthesis and ease of surface functionalization. A biotin-streptavidin-biotin bridge was constructed on the surface of the particles and used to attach biotinylated Protein A/G (PAG), which has high affinity for antibodies. The biotin-streptavidin-biotin bridge is hypothesized to orient the PAG in a favorable manner for efficient antibody capture. Nonporous silica nanoparticles (approximately 270 nm in diameter) were synthesized via the Stöber method. Following amine …

Development Of Soluble Bioactive Poly(Beta Amino Esters) (Pβaes) For Post-Synthesis Processing, Kelley Wiegman

Theses and Dissertations--Chemical and Materials Engineering

Polymers have proven to be a viable platform to facilitate the controlled and targeted release for a variety of therapeutic agents. Polymeric prodrugs are a growing area of drug delivery in which active pharmaceutical ingredients are covalently linked to a polymeric form in an effort to enhance stability, delivery, and pharmacology. One naturally occurring class of active ingredients, known as polyphenols, can potentially offer a vast array of beneficial therapeutic properties. However, the therapeutic efficacy of these compounds is severely limited due to poor solubility and bioavailability as well as an oxidative and thermal instability. To improve the efficacy of …

Photocatalytic Degradation Of Lignin By Supported Silver Nanoparticles, Ning Wei

Theses and Dissertations--Chemical and Materials Engineering

Lignin is the second most abundant form of biomass on earth. The phenolic structure and high carbon to oxygen ratio make lignin an attractive renewable source of fuel and chemicals. However, its recalcitrance and heterogeneous nature prove difficult for decomposing lignin’s polymer structure and separation of the products. This work has focused on the use of low-energy catalytic approaches to overcome these barriers. A mimic of the lignin degrading enzyme laccase, consisting of a copper cluster Cu4Py4I4 modified with AgNO3, was developed to function similarly to the laccase active site. The prepared copper complex solution was found to be active …

Scale Model Equations And Optimization For Annular Flow Of Non-Newtonian Fluids Between Eccentric And Rotating Cylinders, Wei Zhang, Pooya Khodaparast, Amin Mehrabian Dr., Amir Shojaei

Progress in Scale Modeling, an International Journal

A broad range of engineering applications involves helical flow of non-Newtonian fluids between two eccentric cylinders. These applications often require estimation of the frictional pressure losses along the axes of the cylinders. Laboratory flow loops are commonly used to study the flow characteristics at smaller scales of investigation. This study uses the laws of similarity and dimensional analysis to obtain a set of scaling equations between the laboratory and prototype scales of the described annular flow. These equations are derived for four types of fluid rheology including Newtonian, power-law, Bingham-plastic, and yield power-law.

Results are expressed through a set of …

Numerical Investigation On The Effect Of Spectral Radiative Heat Transfer Within An Ablative Material, Raghava S. C. Davuluri, Rui Fu, Kaveh A. Tagavi, Alexandre Martin

Mechanical Engineering Faculty Publications

The spectral radiative heat flux could impact the material response. In order to evaluate it, a coupling scheme between KATS - MR and P1 approximation model of radiation transfer equation (RTE) is constructed and used. A Band model is developed that divides the spectral domain into small bands of unequal widths. Two verification studies are conducted: one by comparing the simulation computed by the Band model with pure conduction results and the other by comparing with similar models of RTE. The comparative results from the verification studies indicate that the Band model is computationally efficient and can be used to …

Fischer–Tropsch Synthesis: Effect Of The Promoter’S Ionic Charge And Valence Level Energy On Activity, Mirtha Z. Leguizamón León Ribeiro, Joice C. Souza, Muthu Kumaran Gnanamani, Michela Martinelli, Gabriel F. Upton, Gary Jacobs, Mauro C. Ribeiro

Center for Applied Energy Research Faculty and Staff Publications

In this contribution, we examine the effect of the promoter´s ionic charge and valence orbital energy on the catalytic activity of Fe-based catalysts, based on in situ synchrotron X-ray powder diffraction (SXRPD), temperature-programmed-based techniques (TPR, TPD, CO-TP carburization), and Fischer–Tropsch synthesis catalytic testing studies. We compared the promoting effects of K (a known promoter for longer-chained products) with Ba, which has a similar ionic radius but has double the ionic charge. Despite being partially “buried” in a crystalline BaCO₃ phase, the carburization of the Ba-promoted catalyst was more effective than that of K; this was primarily due to its …

Hydrocracking Of Octacosane And Cobalt Fischer–Tropsch Wax Over Nonsulfided Nimo And Pt-Based Catalysts, Wenping Ma, Jungshik Kang, Gary Jacobs, Shelley D. Hopps, Burtron H. Davis

Center for Applied Energy Research Faculty and Staff Publications

The effect of activation environment (N₂, H₂ and H₂S/H₂) on the hydrocracking performance of a NiMo/Al catalyst was studied at 380 °C and 3.5 MPa using octacosane (C₂₈). The catalyst physical structure and acidity were characterized by BET, XRD, SEM-EDX and FTIR techniques. The N₂ activation generated more active nonsulfided NiMo/Al catalyst relative to the H₂ or H₂S activation (X_C28, 70–80% versus 6–10%). For a comparison, a NiMo/Si-Al catalyst was also tested after normal H₂ activation and showed higher activity at the same process …

Fully Coupled Internal Radiative Heat Transfer For The 3d Material Response Of Heat Shield, Raghava S. C. Davuluri, Rui Fu, Kaveh A. Tagavi, Alexandre Martin

Mechanical Engineering Faculty Publications

The radiative transfer equation (RTE) is strongly coupled to the material response code KATS. A P-1 approximation model of RTE is used to account for radiation heat transfer within the material. First, the verification of the RTE model is performed by comparing the numerical and analytical solutions. Next, the coupling scheme is validated by comparing the temperature profiles of pure conduction and conduction coupled with radiative emission. The validation study is conducted on Marschall et al. cases (radiant heating, arc-jet heating, and space shuttle entry), 3D Block, 2D IsoQ sample, and Stardust Return Capsule. The validation results agree well for …

Fischer–Tropsch Synthesis For Light Olefins From Syngas: A Review Of Catalyst Development, Arash Yahyazadeh, Ajay K. Dalai, Wenping Ma, Lifeng Zhang

Center for Applied Energy Research Faculty and Staff Publications

Light olefins as one the most important building blocks in chemical industry can be produced via Fischer–Tropsch synthesis (FTS) from syngas. FT synthesis conducted at high temperature would lead to light paraffins, carbon dioxide, methane, and C5+ longer chain hydrocarbons. The present work focuses on providing a critical review on the light olefin production using Fischer– Tropsch synthesis. The effects of metals, promoters and supports as the most influential parameters on the catalytic performance of catalysts are discussed meticulously. Fe and Co as the main active metals in FT catalysts are investigated in terms of pore size, crystal size, and …

Advanced Research And Development Of Face Masks And Respirators Pre And Post The Coronavirus Disease 2019 (Covid-19) Pandemic: A Critical Review, Ebuka A. Ogbuoji, Amr M. Zaky, Isabel C. Escobar

Chemical and Materials Engineering Faculty Publications

The outbreak of the COVID-19 pandemic, in 2020, has accelerated the need for personal protective equipment (PPE) masks as one of the methods to reduce and/or eliminate transmission of the coronavirus across communities. Despite the availability of different coronavirus vaccines, it is still recommended by the Center of Disease Control and Prevention (CDC), World Health Organization (WHO), and local authorities to apply public safety measures including maintaining social distancing and wearing face masks. This includes individuals who have been fully vaccinated. Remarkable increase in scientific studies, along with manufacturing-related research and development investigations, have been performed in an attempt to …

Polymers And Solvents Used In Membrane Fabrication: A Review Focusing On Sustainable Membrane Development, Xiaobo Dong, David Lu, Tequila A. L. Harris, Isabel C. Escobar

Chemical and Materials Engineering Faculty Publications

(1) Different methods have been applied to fabricate polymeric membranes with non-solvent induced phase separation (NIPS) being one of the mostly widely used. In NIPS, a solvent or solvent blend is required to dissolve a polymer or polymer blend. N-methyl-2-pyrrolidone (NMP), dimethylacetamide (DMAc), dimethylformamide (DMF) and other petroleum-derived solvents are commonly used to dissolve some petroleum-based polymers. However, these components may have negative impacts on the environment and human health. Therefore, using greener and less toxic components is of great interest for increasing membrane fabrication sustainability. The chemical structure of membranes is not affected by the use of different solvents, …

Transforming Corn Stover To Useful Transport Fuel Blends In Resource-Limited Settings, Nicholas Munu, Noble Banadda, Nicholas Kiggundu, Ahamada Zziwa, Isa Kabenge, Jeffrey Seay, Robert Kambugu, Joshua Wanyama, Albrecht Schmidt

Chemical and Materials Engineering Faculty Publications

Development of local technologies is crucial to the sustainable energy agenda in resource-limited countries and the world. Strengthening local green technologies and promoting local utilization will reduce carbon emissions that could be generated during transportation and delivery of green products from one country to another. In this paper we developed bio-oil/diesel blends using a low-tech pyrolysis system designed for smallholder farmers in developing countries and tested their appropriateness for diesel engines using standard ASTM methods. Corn stover retrieved from smallholder farmers in Gayaza, Uganda were pyrolyzed in a batch rocket stove reactor at 350 °C and liquid bio-oil harvested. Bio-oil …

Open-Field Scale-Model Experiments Of Fire Whirls Over L-Shaped Line Fires, Yuto Iga, Kazunori Kuwana, Kozo Sekimoto, Yuji Nakamura

Progress in Scale Modeling, an International Journal

This paper presents the results of open-field scale-model experiments of fire-whirl formation over line fires. L-shaped line fires were burned in crosswinds, and the processes of fire-whirl formation were observed. The flame height was measured using an image-processing technique, while two-dimensional velocity components were measured at two different locations using ultrasonic anemometers. Two tests were selected for comparison: test A, in which intense fire whirls repeatedly formed, and test B, in which no whirls were observed. In test A, the wind flow was bent by the fire plume, creating swirling flows near the burning area, thereby forming fire whirls. On …

Effects Of Dimensionless Numbers On Decomposition Of Methane Hydrate, Shoma Shimizu, Genichiro Kushida

Progress in Scale Modeling, an International Journal

It is necessary to elucidate the decomposition and combustion of methane hydrate for fire safety during transportation and storage to utilize it for commercial practice. The amount of methane evolved during the decomposition of methane hydrates is affected by the conditions such as the initial temperature, initial density and ambient temperature. In the present study, the internal temperature of methane hydrate and the amount of methane evolved during its decomposition were investigated by a dimensionless numerical analysis using a transient one-dimensional conduction model from a symmetrical methane hydrate ball heated by ambient air. The numerically calculated central temperature and the …

Copper Oxide Nanoparticle Diameter Mediates Serum-Sensitive Toxicity In Beas-2b Cells, Angie S. Morris, Brittany E. Givens, Aaron Silva, Aliasger K. Salem

Chemical and Materials Engineering Faculty Publications

Copper oxide (CuO) nanoparticles (NPs) are abundant in manufacturing processes, but they are an airway irritant. In vitro pulmonary toxicity of CuO NPs has been modeled using cell lines such as human bronchial epithelial cell line BEAS-2B. In 2D in vitro culture, BEAS-2B undergoes squamous differentiation due to the presence of serum. Differentiation is part of the repair process of lung cells in vivo that helps to preserve the epithelial lining of the respiratory tract. Herein, the effects of serum on the hydrodynamic diameter, cellular viability, cellular differentiation, and cellular uptake of 5 and 35 nm CuO NPs are investigated, …