Chemical Engineering Commons^™

Computational Materials Characterization, Discovery, And Design With High Performance Computing, Qunfei Zhou, Xiaotao Liu, Tyler Maxwell, Thomas John Balk, Matthew J. Beck

Commonwealth Computational Summit

No abstract provided.

Spontaneous Jumping, Bouncing And Trampolining Of Hydrogel Drops On A Heated Plate, Jonathan T. Pham, Maxime Paven, Sanghyuk Wooh, Tadashi Kajiya, Hans-Jürgen Butt, Doris Vollmer

Chemical and Materials Engineering Faculty Publications

The contact between liquid drops and hot solid surfaces is of practical importance for industrial processes, such as thermal spraying and spray cooling. The contact and bouncing of solid spheres is also an important event encountered in ball milling, powder processing, and everyday activities, such as ball sports. Using high speed video microscopy, we demonstrate that hydrogel drops, initially at rest on a surface, spontaneously jump upon rapid heating and continue to bounce with increasing amplitudes. Jumping is governed by the surface wettability, surface temperature, hydrogel elasticity, and adhesion. A combination of low-adhesion impact behavior and fast water vapor formation …

Tuning Properties Of Poly(Ethylene Glycol)-Block-Poly(Simvastatin) Copolymers Synthesized Via Triazabicyclodecene, Theodora A. Asafo-Adjei, Thomas D. Dziubla, David A. Puleo

Biomedical Engineering Faculty Publications

Simvastatin was polymerized into copolymers to better control drug loading and release for therapeutic delivery. When using the conventional stannous octoate catalyst in ring-opening polymerization (ROP), reaction temperatures ≥ 200 °C were required, which promoted uncontrollable and undesirable side reactions. Triazabicyclodecene (TBD), a highly reactive guanidine base organocatalyst, was used as an alternative to polymerize simvastatin. Polymerization was achieved at 150 °C using 5 kDa methyl-terminated poly(ethylene glycol) (mPEG) as the initiator. ROP reactions with 2 kDa or 550 Da mPEG initiators were also successful using TBD at 150 °C instead of stannous octoate, which required a higher reaction temperature. …

Improving The Thermal Stability Of Cellobiohydrolase Cel7a From Hypocrea Jecorina By Directed Evolution, Frits Goedegebuur, Lydia Dankmeyer, Peter Gualfetti, Saeid Karkehabadi, Henrik Hansson, Suvamay Jana, Vicky Huynh, Bradley R. Kelemen, Paulien Kruithof, Edmund A. Larenas, Pauline J. M. Teunissen, Jerry Ståhlberg, Christina M. Payne, Colin Mitchinson, Mats Sandgren

Chemical and Materials Engineering Faculty Publications

Secreted mixtures of Hypocrea jecorina cellulases are able to efficiently degrade cellulosic biomass to fermentable sugars at large, commercially relevant scales. H. jecorina Cel7A, cellobiohydrolase I, from glycoside hydrolase family 7, is the workhorse enzyme of the process. However, the thermal stability of Cel7A limits its use to processes where temperatures are no higher than 50 °C. Enhanced thermal stability is desirable to enable the use of higher processing temperatures and to improve the economic feasibility of industrial biomass conversion. Here, we enhanced the thermal stability of Cel7A through directed evolution. Sites with increased thermal stability properties were combined, and …

Catalytic Oxidation And Depolymerization Of Lignin In Aqueous Ionic Liquid, Lalitendu Das, Siquan Xu, Jian Shi

Biosystems and Agricultural Engineering Faculty Publications

Lignin is an integral part of the plant cell wall, which provides rigidity to plants, also contributes to the recalcitrance of the lignocellulosic biomass to biochemical and biological deconstruction. Lignin is a promising renewable feedstock for aromatic chemicals; however, an efficient and economic lignin depolymerization method needs to be developed to enable the conversion. In this study, we investigated the depolymerization of alkaline lignin in aqueous 1-ethyl-3-methylimidazolium acetate [C₂C₁Im][OAc] under oxidizing conditions. Seven different transition metal catalysts were screened in presence of H₂O₂ as oxidizing agent in a batch reactor. CoCl₂ and …

Enhancements In Mass Transfer For Carbon Capture Solvents Part I: Homogeneous Catalyst, Leland R. Widger, Moushumi Sarma, Jonathan J. Bryant, David S. Mannel, Jesse G. Thompson, Cameron A. Lippert, Kunlei Liu

Center for Applied Energy Research Faculty and Staff Publications

The novel small molecule carbonic anhydrase (CA) mimic [Co^III(Salphen-COO⁻)Cl]HNEt₃ (1), was synthesized as an additive for increasing CO₂ absorption rates in amine-based post-combustion carbon capture processes (CCS), and its efficacy was verified. 1 was designed for use in a kinetically slow but thermally stable blended solvent, containing the primary amines 1-amino-2-propanol (A2P) and 2-amino-2-methyl-1-propanol (AMP). Together, the A2P/AMP solvent and 1 reduce the overall energy penalty associated with CO₂ capture from coal-derived flue gas, relative to the baseline solvent MEA. 1 is also effective at increasing absorption kinetics of kinetically fast solvents, such …

Analysis And Modeling Of The Growth Of Intermetallic Compounds In Aluminum–Steel Joints, Gang Zhang, Manjiao Chen, Yu Shi, Jiankang Huang, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

In this work, we experimentally and numerically studied the microstructures and growth of intermetallic compounds (IMCs) formed in Al–Fe (aluminum–steel) joints welded by a pulsed double electrode gas metal arc welding (DE-GMAW)-brazing method. The IMCs consist of Fe₂Al₅ and FeAl₃, with Fe₂Al₅ being the main compound in the joints. The thickness of an IMC layer increases with an increase of the welding current (heat input) into the base metal. EBSD measurement suggests that the preferred crystal orientation of the Fe₂Al₅ IMC likely provides the necessary path for Al atoms …

Glucose Recovery From Different Corn Stover Fractions Using Dilute Acid And Alkaline Pretreatment Techniques, D. Aboagye, N. Banadda, R. Kambugu, Jeffrey Seay, N. Kiggundu, A. Zziwa, I. Kabenge

Chemical and Materials Engineering Faculty Publications

Background: Limited availability of corn stover due to the competing uses (organic manure, animal feed, bio-materials, and bioenergy) presents a major concern for its future in the bio-economy. Furthermore, biomass research has exhibited different results due to the differences in the supply of enzymes and dissimilar analytical methods. The effect of the two leading pretreatment techniques (dilute acid and alkaline) on glucose yield from three corn stover fractions (cob, stalk, and leaf) sourced from a single harvest in Uganda were studied at temperatures 100, 120, 140, and 160 °C over reaction times of 5, 10, 30, and 60 min.

Results: …

Comparison Between Single Loading–Unloading Indentation And Continuous Stiffness Indentation, Yun-Fei Jia, Yuan-Yuan Cui, Fu-Zhen Xuan, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Experiments are performed on fused silica, Si, and duplex stainless steel to examine whether the CSM (continuous stiffness indentation) method will provide approximately the “same” results of contact modulus and indentation hardness as those measured from the quasi-static single loading–unloading indentation. The experimental results show that the elastic modulus measured by the CSM method is compatible with that by the quasi-static loading–unloading method for hard materials, while there exists a percentage difference of ∼21.3% between the smallest value and the largest vale of the measured indentation hardnesses from the CSM method for fused silica and a percentage difference of ∼15.3% …

Anion Exchange Membrane Capacitive Deionization Cells, Ayokunle Omosebi, Xin Gao, Nicolas Holubowitch, Zhiao Li, James Landon, Kunlei Liu

Center for Applied Energy Research Faculty and Staff Publications

The electrochemical response of capacitive deionization (CDI) employing a single anion exchange membrane (AEM-CDI) is contrasted to conventional two-membrane CDI (MCDI) formed with complementary anion and cation exchange membranes. Pristine activated carbon cloth electrodes that possess native positive surface charge in solution were used as both anode (positive electrode) and cathode (negative electrode) in these cells. In a separate set of tests to investigate the impact of surface charge modification on deionization responses, the single and dual membrane cells were formed with asymmetric electrodes (AEM-aCDI and aMCDI) consisting of nitric acid oxidized electrodes that possess negative surface charge as the …

Size And Shape Distributions Of Primary Crystallites In Titania Aggregates, Eric A. Grulke, Kazuhiro Yamamoto, Kazuhiro Kumagai, Ines Häusler, Werner Österle, Erik Ortel, Vasile-Dan Hodoroaba, Scott C. Brown, Christopher Chan, Jiwen Zheng, Kenji Yamamoto, Kouji Yashiki, Nam Woong Song, Young Heon Kim, Aleksandr B Stefaniak, D. Schwegler-Berry, Victoria A. Coleman, Åsa K. Jämting, Jan Herrmann, Toru Arakawa, Woodrow W. Burchett, Joshua W. Lambert, Arnold J. Stromberg

Chemical and Materials Engineering Faculty Publications

The primary crystallite size of titania powder relates to its properties in a number of applications. Transmission electron microscopy was used in this interlaboratory comparison (ILC) to measure primary crystallite size and shape distributions for a commercial aggregated titania powder. Data of four size descriptors and two shape descriptors were evaluated across nine laboratories. Data repeatability and reproducibility was evaluated by analysis of variance. One-third of the laboratory pairs had similar size descriptor data, but 83% of the pairs had similar aspect ratio data. Scale descriptor distributions were generally unimodal and were well-described by lognormal reference models. Shape descriptor distributions …

Method Of Inhibiting Nitrosation Of An Aqueous Amine Solution Used In A Process Of Removing Carbon Dioxide From A Flue Gas, Joseph Eugene Remias, Payal Chandan, Kunlei Liu

Center for Applied Energy Research Faculty Patents

A method is provided for inhibiting nitrosation of an aqueous amine solution used in a process of removing carbon dioxide from a flue gas. That method includes a step of adding an effective amount of an antioxidant to the aqueous amine solution being circulated between an absorber and a stripper of a carbon dioxide capture system.

Desulfination By 2′-Hydroxybiphenyl-2-Sulfinate Desulfinase Proceeds Via Electrophilic Aromatic Substitution By The Cysteine-27 Proton, Inacrist Geronimo, Shawn R. Nigam, Christina M. Payne

Chemical and Materials Engineering Faculty Publications

Biodesulfurization is an attractive option for enzymatically removing sulfur from the recalcitrant thiophenic derivatives that comprise the majority of organosulfur compounds remaining in hydrotreated petroleum products. Desulfurization in the bacteria Rhodococcus erythropolis follows a four-step pathway culminating in C–S bond cleavage in the 2′-hydroxybiphenyl-2-sulfinate (HBPS) intermediate to yield 2-hydroxybiphenyl and bisulfite. The reaction, catalyzed by 2′-hydroxybiphenyl-2-sulfinate desulfinase (DszB), is the rate-limiting step and also the least understood, as experimental evidence points to a mechanism unlike that of other desulfinases. On the basis of structural and biochemical evidence, two possible mechanisms have been proposed: nucleophilic addition and electrophilic aromatic substitution. Density …

Pore Functionalized Pvdf Membranes With In-Situ Synthesized Metal Nanoparticles: Material Characterization, And Toxic Organic Degradation, Hongyi Wan, Nicolas J. Briot, Anthony Saad, Lindell E. Ormsbee, Dibakar Bhattacharyya

Chemical and Materials Engineering Faculty Publications

Functionalized PVDF membrane platforms were developed for environmentally benign in-situ nanostructured Fe/Pd synthesis and remediation of chlorinated organic compounds. To prevent leaching and aggregation, nanoparticle catalysts were integrated into membrane domains functionalized with poly (acrylic acid). Nanoparticles of 16–19 nm were observed inside the membrane pores by using focused ion beam (FIB). This technique prevents mechanical deformation of the membrane, compared to the normal SEM preparation methods, thus providing a clean, smooth surface for nanoparticles characterization. This allowed quantification of nanoparticle properties (size and distribution) versus depth underneath the membrane surface (0–20 μm). The results showed that nanoparticles were uniformly …

Methanol Steam Reforming: Na Doping Of Pt/Ysz Provides Fine Tuning Of Selectivity, Michela Martinelli, Gary Jacobs, Uschi M. Graham, Burtron H. Davis

Center for Applied Energy Research Faculty and Staff Publications

In this work, we found that sodium doping can be used to improve CO₂ selectivity for supported Pt catalyst during methanol steam reforming. These materials are usually very active in the low temperature range; however, they are characterized by high selectivity of CO, which is a poison in downstream polymer electrolyte membrane fuel cells (PEM-FC) application. With Na doping, we found that CO₂ selectivity was higher than 90% when 2.5 wt.% of sodium was added to Pt/YSZ. We have speculated that the different product distribution is due to a different reaction pathway being opened for CH₃OH …

Synthesis Of Graphene Oxide Membranes And Their Behavior In Water And Isopropanol, Ashish Aher, Yuguang Cai, Mainak Majumder, Dibakar Bhattacharyya

Chemical and Materials Engineering Faculty Publications

Graphene oxide (GO) membrane has been synthesized on commercial polysulfone ultrafiltration membranes (Pore size: 17 nm) using the drop casting method followed by baking at 90 C for 24 h. Baking resulted in the reduction of GO and removal of bulk water intercalated in the GO sheets. Deposited GO film showed high stability under shear stress variation. This work shows that water adsorption on the GO membrane determines its permeation performance. Despite the higher viscosity of isopropyl alcohol (IPA), its permeability was 7 times higher than water through the baked (“dry”) GO membranes, which were never contacted with water. However, …

Chemically Stable Artificial Sei For Li-Ion Battery Electrodes, Qinglin Zhang, Lei Han, Jie Pan, Zhi Chen, Yang-Tse Cheng

Chemical and Materials Engineering Faculty Publications

The importance of coating's chemical stability in lithium-ion batteries has been demonstrated by this study. It is well known that the mechanical properties determine the cycle life, and chemical stability or chemical degradation rate determines the calendar life. In this study, we used HfO₂ coatings prepared by atomic layer deposition as an example to show the chemical stability of the coatings for lithium ion battery electrodes.

Synthesis And Catalytic Applications Of Non-Metal Doped Mesoporous Titania, Syed Z. Islam, Suraj R. Nagpure, Doo Young Kim, Stephen E. Rankin

Chemical and Materials Engineering Faculty Publications

Mesoporous titania (mp-TiO₂) has drawn tremendous attention for a diverse set of applications due to its high surface area, interfacial structure, and tunable combination of pore size, pore orientation, wall thickness, and pore connectivity. Its pore structure facilitates rapid diffusion of reactants and charge carriers to the photocatalytically active interface of TiO₂. However, because the large band gap of TiO₂ limits its ability to utilize visible light, non-metal doping has been extensively studied to tune the energy levels of TiO₂. While first-principles calculations support the efficacy of this approach, it is challenging to …

Toxicity Evaluation Of Magnetic Hyperthermia Induced By Remote Actuation Of Magnetic Nanoparticles In 3d Micrometastasic Tumor Tissue Analogs For Triple Negative Breast Cancer, Nathanael A. Stocke, Pallavi Sethi, Amar Jyoti, Ryan Chan, Susanne M. Arnold, J. Zach Hilt, Meenakshi Upreti

Chemical and Materials Engineering Faculty Publications

Magnetic hyperthermia as a treatment modality is acquiring increased recognition for loco-regional therapy of primary and metastatic lung malignancies by pulmonary delivery of magnetic nanoparticles (MNP). The unique characteristic of magnetic nanoparticles to induce localized hyperthermia in the presence of an alternating magnetic field (AMF) allows for preferential killing of cells at the tumor site. In this study we demonstrate the effect of hyperthermia induced by low and high dose of MNP under the influence of an AMF using 3D tumor tissue analogs (TTA) representing the micrometastatic, perfusion independent stage of triple negative breast cancer (TNBC) that infiltrates the lungs. …

Incorporating Poly(3-Hexyl Thiophene) Into Orthogonally Aligned Cylindrical Nanopores Of Titania For Optoelectronics, Suraj R. Nagpure, James F. Browning, Stephen E. Rankin

Chemical and Materials Engineering Faculty Publications

The incorporation of hole conducting polymer poly(3-hexyl thiophene) (P3HT) into the 8-9 nm cylindrical nanopores of titania is investigated using films with a unique orthogonally oriented hexagonal close packed mesostructure. The films are synthesized using evaporation induced self-assembly (EISA) with Pluronic triblock copolymer F127 as the structure directing agent. The orthogonally oriented cylindrical nanopore structure was chosen over a cubic structure because confinement in uniform cylindrical channels is hypothesized to enhance hole conductivity of P3HT by inducing local polymer chain ordering. Orthogonal orientation of the cylindrical nanopores is achieved by modifying the substrate (FTO-coated glass slides) with crosslinked F127. After …

Field-Induced Formation And Growth Of Pillars On Films Of Bisphenol-A-Polycarbonate, Yu-Fan Chuang, Jyun-Siang Peng, Fuqian Yang, Donyau Chiang, Sanboh Lee

Chemical and Materials Engineering Faculty Publications

An electric field is used to construct pillars on films of bisphenol-A-polycarbonate (BPAPC) between two parallel electrodes. Both the size and density of the pillars are dependent on the film thickness. For the same experimental conditions, thicker films will lead to the formation of pillars of larger sizes and smaller densities. The time dependence of the average diameter of the pillars is found to be a linear function of the square root of the difference between the annealing time and incubation time. The temperature dependence of the temporal evolution of the pillars follows the Arrhenius relation with an activation enthalpy …

Fatigue Properties And Damage Mechanism Of A Cr-Mn Austenite Steel, Z. Q. Lv, Pei Cai, T. Yu, Yan Jin, H. F. Zhang, Tongguang Zhai, W. T. Fu

Chemical and Materials Engineering Faculty Publications

The fatigue properties and the damage mechanism of a Cr-Mn austenite steel were investigated using four-point bend fatigue testing. The stress-number of cycles to failure (S-N) curve of the Cr-Mn austenite steel was measured at room temperature, at the frequency of f=20 Hz and the stress ratio of R=0.1. The fatigue strength of this Cr-Mn austenite steel was measured to be 503 MPa in the maximum stress. Multiple cracks are initiated on the sample surface after fatigue failure tests, and usually only one or two of them can lead to the final failure of the samples. Most of the cracks …

Interplay Of Composition, Structure, And Electron Density Of States In W-Os Cathode Materials And Relationship With Thermionic Emission, Qunfei Zhou, Thomas John Balk, Matthew J. Beck

Chemical and Materials Engineering Faculty Publications

The presence and composition of W-Os alloys have been found to significantly affect the thermionic emission properties of Os-coated tungsten dispenser cathodes. However, the comprehensive understanding of structure–property relationships needed to design improved tungsten cathodes with larger thermionic emission is still lacking. In this study, composition–structure–property relationships governing thermionic emission from W-Os alloys were investigated using quantum mechanical calculations. Low-energy W-Os atomic configurations at various compositions were determined from first-principles calculations based on density functional theory in combination with cluster expansion calculations. Electronic properties were investigated in terms of the electron density of states. The relative position of the Fermi …

Inhibition Of Mammalian Glycoprotein Ykl-40 Identification Of The Physiological Ligand, Abhishek A. Kognole, Christina M. Payne

Chemical and Materials Engineering Faculty Publications

YKL-40 is a mammalian glycoprotein associated with progression, severity, and prognosis of chronic inflammatory diseases and a multitude of cancers. Despite this well documented association, identification of the lectin′s physiological ligand and, accordingly, biological function has proven experimentally difficult. YKL-40 has been shown to bind chito-oligosaccharides; however, the production of chitin by the human body has not yet been documented. Possible alternative ligands include proteoglycans, polysaccharides, and fibers like collagen, all of which makeup the extracellular matrix. It is likely that YKL-40 is interacting with these alternative polysaccharides or proteins within the body, extending its function to cell biological roles …

Synthesis And Characterization Of Poly(Simvastatin) - Incorporated Copolymers And Blends For Bone Regeneration, Theodora Asafo-Adjei

Theses and Dissertations--Biomedical Engineering

Common biodegradable polyesters such as poly(lactic acid) (PLA), poly(lactic-co-glycolic acid) (PLGA) and poly(ε-caprolactone) (PCL) are used as drug delivery vehicles for tissue regenerative applications. However, they are typically bioinert, with drug loading limitations. Polymerizing the active agent or precursor into its respective biodegradable polymer would control drug loading via molar ratios of drug to initiator used for synthesis. Simvastatin was chosen due to its favorable anti-inflammatory, angiogenic, and osteogenic properties. In addition, its lactone ring lends itself to ring-opening polymerization and, consequently, the synthesis of poly(simvastatin) with controlled simvastatin release.

Simvastatin was first polymerized with a 5kDa methyl-terminated poly(ethylene glycol) …

Tunable Nanocomposite Membranes For Water Remediation And Separations, Sebastián Hernández Sierra

Theses and Dissertations--Chemical and Materials Engineering

Nano-structured material fabrication using functionalized membranes with polyelectrolytes is a promising research field for water pollution, catalytic and mining applications. These responsive polymers react to external stimuli like temperature, pH, radiation, ionic strength or chemical composition. Such nanomaterials provide novel hybrid properties and can also be self-supported in addition to the membranes.

Polyelectrolytes (as hydrogels) have pH responsiveness. The hydrogel moieties gain or lose protons based on the pH, displaying swelling properties. These responsive materials can be exploited to synthesize metal nanoparticles in situ using their functional groups, or to immobilize other polyelectrolytes and biomolecules. Due to their properties, these …

Fractionation And Characterization Of Lignin Streams From Genetically Engineered Switchgrass, Enshi Liu

Theses and Dissertations--Biosystems and Agricultural Engineering

Development of biomass feedstocks with desirable traits for cost-effective conversion is one of the main focus areas in biofuels research. As suggested by techno-economic analyses, the success of a lignocellulose-based biorefinery largely relies on the utilization of lignin to generate value-added products, i.e. fuels and chemicals. The fate of lignin and its structural/compositional changes during pretreatment have received increasing attention; however, the effect of genetic modification on the fractionation, depolymerization and catalytic upgrading of lignin from genetically engineered plants is not well understood. This study aims to fractionate and characterize the lignin streams from a wild-type and two genetically engineered …

Surface Chemisty Study Of Monazite Flotation In Coal Refuse Systems, Wencai Zhang

Theses and Dissertations--Mining Engineering

Rare earth mineral recovery from alternative resources such as coal and coal byproducts is increasingly important to provide an opportunity for economic recovery from U.S. sources. Currently, China produces the majority of the 149,000 tons of rare earth elements used annually worldwide of which the U.S. imports 11% or around 16,000 tons. There are no significant mining operations producing rare earth elements in the U.S. However, there are many U.S. sources containing rare earth minerals such as monazite including heavy mineral sand and phosphate operations. Monazite mineral particles of a few microns have also been detected in Fire Clay seam …

Biomimetic Devices To Drive A Thermodynamically Uphill Reaction Using Light And To Degrade Industrial Waste Stream Components, Madison Joanne Sloan

Theses and Dissertations--Chemistry

Given the amount of industrial waste produced each year, as well as the accruing amount of greenhouse gases in our atmosphere produced by the burning of fossil fuels, it is imperative that humanity develop environmentally-sustainable sources of energy and methods of remediation. Nature achieves both of these by use of enzymes as catalysts, inspiring interest in designing biomimetic systems capable of harnessing clean energy and remediating industrial waste. This study examined the ability of enzymes in electrochemical and convective flow systems to achieve these tasks. The first portion studied the incorporation of enzymes into an electrochemical system to drive the …

Formulation And Characterization Of Poly(Β-Amino Ester) Networks For Controlled Delivery Of Antioxidants In Pharmaceutical Applications, Vinod Shivaji Patil

Theses and Dissertations--Chemical and Materials Engineering

Oxidative stress, which reflects an imbalance between oxidants and endogenous antioxidants, is known to be a cause as well as an effect of health conditions such as cancer, diabetes, Alzheimer’s disease, Parkinson’s disease and ischemia-reperfusion injury. Antioxidants have shown promising results in vitro in controlling oxidative stress. However, years of in vitro studies have failed to translate into effective clinical interventions for controlling oxidative stress in the disease conditions. This has been due to low bioavailability and lower stability of antioxidants. Poly(antioxidant β-amino esters) (PABAE) are a recently-developed class of biodegradable polymeric hydrogels that have shown promise in their ability …