Chemical Engineering Commons^™

Production And Characterization Of Bio-Oil From Camelthorn Plant Using Slow Pyrolysis, Attia Attia Prof., Dina Aboelela Dr., Habibatallah Saleh Eng., Yasser Elhenawy Prof., Thokozani Majozi Prof., Mohamed Bassyouni Prof.

Biochemical Engineering

In this study, slow pyrolysis of the camelthorn plant process was conducted to produce bio-oil, biochar, and gas. The pyrolysis process was conducted between 400 and 550 °C under pressure 10 bar using a fixed bed reactor. The pyrolysis products were bio-oil, biogas, and biochar. These products were characterized using Fourier-transform infrared (FT-IR) model, gas analyzer, chromatographic analysis using GC–MS, and thermogravimetric analysis (TGA). The GC–MS results demonstrated composition of bio-oil, detecting several organic substances including levoglucosan, furan, acetic acid, phenol, and long-chain hydrocarbon. To further understand the chemical composition of bio-oil, FT-IR spectroscopy was conducted to determine functional groups. …

Green Synthesis Of Carbonized Chitosan-Fe3o4-Sio2 Nano-Composite For Adsorption Of Heavy Metals From Aqueous Solutions, Dalia A. Ali Eng, Rinad Galal Ali Eng.

Chemical Engineering

Water pollution with heavy metals owing to industrial and agricultural activities have become a critical dilemma to humans, plants as well as the marine environment. Therefore, it is of great importance that the carcinogenic heavy metals present in wastewater to be eliminated through designing treatment technologies that can remove multiple pollutants. A novel green magnetic nano-composite called (Carbonized Chitosan-Fe3O4-SiO2) was synthesized using Co-precipitation method to adsorb a mixture of heavy metal ions included; cobalt (Co2+), nickel (Ni2+) and copper (Cu2+) ions from aqueous solutions. The novelty of this study was the synthesis of a new

nano-composite which was green with …

Experimental Study On The Effect Of Micro Concentrations Of Hybrid Nanofluids Through Microchannel Heat Sinks, Mohamed Salaheldin Elsherbiny, Moustafa Ali, Moatsem Shahin, Mahmoud El-Kady

Renewable Mechanical Energy

The current study examines the convective heat transfer coefficient experimentally. It assesses the performance of Al2O3, CuO, ZnO, and Ag/ distilled water nanofluids up to a tetra level of hybridization utilized in microprocessor cooling systems equipped with MCHS. An equal ratio of 50%, 33.3%, and 25% for di-, tri-, and tetra-nanofluids, respectively, with a focus on micro-volume fraction 0.025% and comparing it with 0.05%. Operating conditions were as follows: heat loading from 136.4 up to 196.4 watts; and flow rate from 0.35 up to 0.5 LPM. The findings showed that all types of mono nanofluids showed an increase in Nu …

Exploring Co2-Eor Miscibility Flooding Potential For Horus Oil Field, Western Desert, Egypt: A Simulation-Based Investigation, Attia Attia, Adel Salem Prof., Rehab El-Maghraby, Mohamed Youssef Prof.

Petroleum Engineering and Gas

Carbon dioxide (CO2) miscible flooding is becoming increasingly vital in enhanced oil recovery (EOR) not only for residual oil extraction but also for holding a potential for environmental protection, given its association with global warming. This paper explores the impact of EOR using miscible continuous gas injection on enhancing the oil productivity of the aging Horus oil field in Egypt's Western Desert. Horus field faces declining production rates and a significant water cut, with only eight wells out of 24 wells actively producing. Currently, the field maintains a stabilized oil production plateau of 1050 barrels per day, accompanied by a …

Optoelectronic And Morphological Surface Resistance Evaluation Of Laser-Induced Graphene Counter Electrodes For Potential Applications In Cesium Lead Halide Perovskite Solar Cells, Ziad Khalifa, Sameh Osama Abdellatif, Rami Ghannam

Chemical Engineering

This study investigates the physicochemical, optical, and electrical characterization of laser-induced graphene (LIG) samples for integration as counter electrodes in cesium lead halide perovskite solar cells. The impact of laser processing parameters on electrode performance is explored, including laser power, laser speed, and beam defocus. Density functional theory (DFT) computational modeling is employed for atomistic investigation and work function estimation, demonstrating the density of states (DOS), quantum capacitance of the graphene sheets, and energy work function. NiO is utilized as a hole transport layer, and the energy work function of LIG is tuned accordingly. SEM measurements estimate thin film porosity, …

Utilization Of Iron Fillings Solid Waste For Optimum Biodiesel Production, Fady Ihab Bayoumy Eng., Ahmed Osman Ahmed Dr., David W. Rooney Dr., Mai H. Roushdy

Chemical Engineering

This study explores the innovative application of iron filings solid waste, a byproduct from mechanical workshops, as a heterogeneous catalyst in the production of biodiesel from waste cooking oil. Focusing on sustainability and waste valorization, the research presents a dual-benefit approach: addressing the environmental issue of solid waste disposal while contributing to the renewable energy sector. Particle size distribution analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray fluorescence (XRF), Thermal analysis (TG-DTA), and FTIR analysis were used to characterize the iron filings. The response surface methodology (RSM) was used to guide a series of experiments that were conducted to …

Valorisation Of Water Hyacinth For Different Engineering Applications, Nessren Farrag, Zeinab Elbhnsawi, Omar Aboelazayem

Chemical Engineering

Nature has many elements that can be beneficial or harmful. One of these elements is water hyacinth (WH) which is an aquatic weed found in water bodies such as rivers and lakes and it has an invasive nature due to its rapid growth rate. On the contrary, water hyacinth, despite its classification as an invasive plant species, possesses a multitude of industrial and engineering applications, demonstrating substantial potential for valorisation into various products. Its versatile attributes and widespread availability render water hyacinth a viable resource for deployment across several sectors, including wastewater treatment, bioenergy generation, bioremediation, and sustainable agriculture. The …

Well Log Analysis And Interpretation For Mishrif Formation For Amarah Oil Field, Attia Attia, Ayat Ahmed Jasim, Aqeel Al-Adili, Luma Mahmoud, Mohamed Mansour Eng.

Petroleum Engineering and Gas

This study is intended to interpret of well logs for the purpose of determining petrophysical parameters for Mishrif formation in the Amarah Oil Field. This fi eld is situated in the province of Mysan ten kilometers to the southwest of Amarah and ten kilometers to the northwest of Halafaya’s fi eld, and is located southeast of the fi eld of Kamit and about 30 km. M–N cross plot as well as the Matrix Identifi cation (MID) have been applied to calculate mineralogy and lithology of the formation using well logs, cross plots, and reservoir quality index (RQI) along with fl …

Exploring The Morphological Surface Resistance And Optical Absorption Of Thin Black Carbon Nanotube Films For Electronic And Optoelectronic Devices, Ziad Khalifa, Sameh Osama Abdellatif

Chemical Engineering

This study investigates the optical and electrical properties of thin black films of carbon nanotubes (CNTs) fabricated under various conditions to explore their potential integration as either a perfect broadband absorber or enhanced counter electrode. The study involves SEM measurements, surface resistance measurements, and UV–Vis. spectrometer analysis. The results show that the CNT thin films exhibit high electrical conductivity and strong light absorption across various wavelengths. Optically, we investigated the impact of varying the growth temperature and catalyst temperature on the absorption profile of the thin films. The fabricated and deposited CNTs showed broadband absorption spectra, reaching 92.8% of the …

New Models For Estimating Minimum Miscibility Pressure Of Pure And Impure Carbon Dioxide Using Artificial Intelligence Techniques, Attia Attia, Ahmed Ashraf Soliman Eng., John Shahat Eng., Sayed Gomaa Prof., Fares Ashraf El Salamony Prof.

Petroleum Engineering and Gas

CO2 miscible flooding stands out as one of the most-commonly employed and promising processes in enhanced oil recovery. The key factor for ensuring success in designing and executing CO2 injection projects lies in the precise determination of the Minimum Miscibility Pressure (MMP). Despite significant research endeavors in measuring and predicting the MMP through the use of empirical, analytical, numerical, and experimental approaches, the need for a comprehensive, accurate, efficient, and easy-to-use model remains. In response to this gap, our study developed various predictive models with 205 datasets, including well-established ones such as Artificial Neural Network (ANN), Random Forest (RF), and …

Fabricating A 3d Floating Porous Pdms − Ag/Agbr Decorated G-C3n4 Nanocomposite Sponge As A Re-Usable Visible Light Photocatalyst, Maryam Galal Elmahgary, Mohamed Taha, A Kalid, Shymaa Madany, Yasser Attia

Chemical Engineering

No abstract provided.

Radiation-Induced Polymerization Of Thermo-Responsive Polymers And Comprehensive Characterization For Improved Performance, Attia Attia, Islam Mohamed Eng., Mohamed El-Deab Prof., Nabila Maziad Prof.

Petroleum Engineering and Gas

Early water breakthrough with high water cut through highly conductive thief zones is a prevalent problem in many water-flooded oil reservoirs. Smart polymers that are sensitive to temperature changes, also known as thermo-responsive polymers, e.g., polyethylene glycol (PEG) have great advantages over conventional polymers that can be exploited to solve the problem of conductive thief zones. Thus, this study aims at designing and synthesizing a thermo-responsive polymer using Gamma Ray Induced radiation with good tolerance against high temperature, and high salinity reservoir conditions with feasible and economic synthesis procedure for application in Egyptian oil reservoirs. That is a combined use …

Development Of A New Approach Using An Artificial Neural Network For Estimating Oil Formation Volume Factor At Bubble Point Pressure Of Egyptian Crude Oil, Attia Attia, Abdelrahman Gouda Eng.

Petroleum Engineering and Gas

Understanding the phase behavior and volumetric changes of reservoir fluids throughout the extent of reservoir lifetime are crucially required for effective-commercial oil recoveries. Ideally, reservoir fluid properties are experimentally measured by laboratory experiments known as PVT tests nonetheless, these tests are prohibitive, time-consuming, and required to restrict sampling and transporting procedures. For these discernible reasons, several modeling approaches have been developed. By reviewing the literature, one crucial obstacle that encounters field applicability of most extant models is the selection of input variables. Moreover, a great percentage of extant models employ the results of lengthy experimental tests such as differential gas …

Process Optimization For Syngas Production From The Dry Reforming Of Methane Over 5ni+3sr/10zr+Al Catalyst Using Multiple Response Surface Methodology, Ahmed Al-Fatesh Dr., Mai H. Roushdy, Radwa El-Salamony Dr., Saba Alwan Dr., Ahmed Osman Dr., Sadeq Al-Faresh Dr., Hamid Ahmed Dr., Anis Fakeeha Dr., Ahmed Ibrahim Dr.

Chemical Engineering

5Ni+3Sr/10Zr+Al catalyst is synthesized using the impregnation method, characterized, and tested for dry reforming of methane. The influence of reaction temperature, feed ratio (CO2/CH4), and gas hour space velocity are examined using multiple response surface methodology through three factors in, a four-level central composite design. Second and higher-order regression models are applied to evaluate the interaction between the process parameters and responses. The results indicate that the reaction temperature is the most influential followed by the space velocity, while the feed ratio has a weak effect. The optimum values that maximize each of the response variables are found to be …

Evaluating Medium Decision Tree Model, Support Vector Machine Rational Quadratic Gaussian Process Regression To Estimate The Total Organic Carbon Of Shale Gas Reservoirs, Attia Attia, Sayed Gomaa, Mohamed Mongy Eng., Ramadan Emara Prof., Ashraf Fahmy Prof.

Petroleum Engineering and Gas

As a result of an energy crisis due to the Russian-Ukrainian war, the eyes of great countries such as America and others began to turn strongly towards exploiting unconventional resources to increase the oil and gas production. The first step in exploiting unconventional sources is to estimate the Total Organic Carbon (TOC). TOC measurements are expensive as well as time consuming, as samples of cuttings or core samples must be present to do the required lab tests. This issue encouraged the researchers to develop mathematical correlation to estimate the TOC. The paper aims at evaluating three of machine learning models …

Process Simulation For Converting Co2 Emissions From The Cementindustry To Dimethyl Ether, Nour Abou Seada, Dina Aboelela

Biochemical Engineering

Climate change is the leading severe problem in the twenty-first century, which is associated with greenhouse gas emissions,carbon dioxide that is the foremost cause of global warming and super greenhouse effect. In this concern, to avoid hazardousproblems, the steady stream of CO2 effluents existing in the atmosphere must be transformed to beneficial products for beingused as an abundant chemical feedstock. Implementing a new green strategy, which is known for the catalytic hydrogenationof CO2 into alternative fuels and valuable chemicals, will be a long-lasting solution to alleviate CO2 emissions. In this paper,a process simulation showing the synthesis of dimethyl ether (DME) …

Hydrogen Production From Microbial Electrolysis Cells Powered With Microbial Fuel Cells, Dina Aboelela

Biochemical Engineering

No abstract provided.

Origin Of Capacitance In Perovskite Solar Cells: Insight Vision On The Energy Band Diagram, Ziad Khalifa, Sameh Abdellatif, Monica Roman

Chemical Engineering

In recent years, perovskite solar cells (PSCs) have made significant progress, with fast improvements in energy conversion. Although they have become incredibly efficient in a short amount of time, they still face several obstacles before becoming a viable commercial technology. Researchers spent time looking for an equivalent circuit that could describe the J-V curves of PSCs and demonstrate the physical processes of optical absorption and carrier transit. In this paper, we proposed a model of perovskite solar cells (PSCs) using SCAPS software to determine the parasitic elements and show the solar cell's behavior. A previous model of a perovskite solar …

Modelling And Optimization For An Operating Giant Gas Plant In Egypt, Nessren Farrag, Mohamed Shebl, Mai Fouad, Abdulaziz Abdulaziz

Chemical Engineering

An Egyptian gas-producing plant located in the north of Egypt on the coast of the Mediterranean Sea near Port Said city is designed mainly to receive and treat natural gas produced from offshore wells. The plant designed capacity is around 2800 million standard cubic feet per day (MMSCFD), which gives it a highly appreciated strategic importance. The primary plant process is removing H2S associated with the produced gas using amine solutions. The plant contains seven units called gas trains, which use packed columns for the removal. An additional acid gas removal unit was involved in the early production facility, which …

Augmented Formic Acid Electro-Oxidation At A Co-Electrodeposited Pd/Au Nanoparticle Catalyst, Yaser M. Asal, Ahmad M. Mohammad, Sayed S. Abd El Rehim, Islam M. Al-Akraa

Chemical Engineering

In this study, the formic acid electro-oxidation reaction (FAEOR) was catalyzed on a Pd-Au co-electrodeposited binary catalyst. The kinetics of FAEOR were intensively impacted by changing the Pd2+:Au3+ molar ratio in the deposition medium. The Pd1-Au1 catalyst (for which the Pd2+:Au3+ molar ratio was 1:1) acquired the highest activity with a peak current density for the direct FAEOR (Ip) of 4.14 mA cm−2 (ca. 13- times higher than that (ca. 0.33 mA cm−2) of the pristine Pd1-Au0 catalyst). It also retained the highest stability that was denoted in fulfilling ca. 0.292 mA cm−2 (ca. 19-times higher than 0.015 …

Optimum Biodiesel Production Using Ductile Cast Iron As A Heterogeneous Catalyst, Nada Amr El-Khashab, Marwa Mohamed Naeem, Mai H. Roushdy

Chemical Engineering

Biofuels production become a target for many researchers nowadays. Biodiesel is one the most important biofuels that are produced from biomass using economics and modern techniques. The ductile cast iron solid waste dust is one of the wastes produced by the cast iron industry which has a bad effect on the environment. This paper investigates the possibility of reusing ductile cast iron solid waste as a biodiesel heterogeneous catalyst used in its production from sunflower waste cooking oil. Four reaction parameters were chosen to determine their effect on the reaction responses. The reaction parameters are M:O ratio, reaction time and …

Sanitary Ware Waste As A Source For A Valuable Biodiesel Catalyst, Mai H. Roushdy

Chemical Engineering

Biofuel is a type of fuel that is made from biomass using modern techniques rather than the relatively slow geological processes that lead to the development of fossil fuels. In Europe, biodiesel is the most widely used biofuel. The sanitary ware industry generates a lot of hazardous waste, such as waste gypsum molds. These molds are broken, pulverized, and reacted with NaCO3 to make CaCO3, which is then heated to produce CaO. The resulting CaO catalyzes the reaction between waste frying oil and methanol for biodiesel synthesis. To evaluate the effect of reaction parameters on the production of biodiesel, the …

Synergistic Enhancement Of Formic Acid Electro-Oxidation On Ptxcuy Co-Electrodeposited Binary Catalysts, Yaser M. Asal, Ahmad M. Mohammad, Sayed S. Abd El Rehim, Islam M. Al-Akraa

Chemical Engineering

A propitious binary catalyst composed of Pt and Cu which were electrodeposited simultaneously onto a glassy carbon (GC) substrate was recommended for the formic acid (FA) electro-oxidation reaction (FAOR); the principal anodic reaction in the direct FA fuel cells (DFAFCs). The simultaneous co-electrodeposition of Pt and Cu in the catalyst provided an opportunity to tune the geometric functionality of the catalyst to resist the adsorption of poisoning CO at the Pt surface that represented the major impediment for DFAFCs marketing. The catalytic activity of the catalyst toward FAOR was significantly influenced by the (Pt4+/Cu2+) molar ratio of the electrolyte during …

Heterogeneous Biodiesel Catalyst From Steel Slag Resulting From An Electric Arc Furnace, Mai H. Roushdy

Chemical Engineering

Biodiesel is one of the most environmentally friendly and renewable fuels, as it is a non-polluting fuel and is made from living resources, such as vegetable oils. The steel industry generates a variety of solid wastes, including electric arc furnace slag (EAFS). The synthesis of biodiesel from waste sunflower cooking oil was examined in this study, utilizing EAFS as a catalyst, which mainly contains ferric and ferrous oxides, calcium oxide, and silica. To evaluate their impact on biodiesel production, four independent variables were chosen: temperature (50–70 ◦C), catalyst loading (1–5%), methanol-to-oil (M:O) molar ratio (5–20), and time (1–4 h). The …

Investigating The Variation In The Optical Properties Of Tio2 Thin-Film Utilized In Bifacial Solar Cells Using Machine Learning Algorithm, Ziad Khalifa, Sameh Abdellatif, Ahmed Fathi, Kareem Abdullah, Minatallah Hassan

Chemical Engineering

Among various solar cell architectures, dye-sensitized solar cells (DSSCs) and perovskite solar cells have demonstrated the capability of being bifacial as both can be fabricated on conducting glass electrodes. In both cells, TiO2 plays a key role in the optoelectronic properties of the cell. Various studies have reported a range of recipes and deposition techniques for TiO2 thin films. Such variety introduces some uncertainties into the optical properties of the prepared films as well as in the process repeatability. Here, we utilized machine learning methods to correlate the film porosity to the film refractive index, making it capable of studying …

Castor Oil Conversion To Biodiesel: A Process Simulation Study, Islam M. Al-Akraa

Chemical Engineering

No abstract provided.

Effect Of Palladium Loading On Catalytic Properties Of Pd/Gce For The Electro-Oxidation Of Methanol, Formic Acid, And Ethylene Glycol, Islam M. Al-Akraa

Chemical Engineering

No abstract provided.

A Competent Mwcnt-Grafted Mnox/Pt Nanoanode For The Direct Formic Acid Fuel Cells, Islam M. Al-Akraa, Ahmad M. Mohammad, Moutaz Mamdouh, Yasser M. Asal

Chemical Engineering

No abstract provided.

Valuable Biodiesel Catalyst From Solvay Wastewater, Mai Hassan Roushdy, Rana Adel Bayoumi

Chemical Engineering

Biodiesel is considered a renewable, green fuel as it is derived from renewable living resources like animal fats or vegetable oils. This research is utilized to investigate the possibility of using Solvay wastewater as a source of biodiesel catalyst, which is CaO. CaCl2 from Solvay wastewater reacts with CO2 to produce CaCO3. CaCO3 is then heated to produce pure CaO. Waste cooking oil, wastewater, and CO2, which are considered dangerous materials to the environment, are used to produce valuable products. This research has environmental and economic benefit benefits of using waste materials as a replacement for raw materials. The selected …

Biodiesel Production From Castor Oil: Mixing Optimization During Transestrification, Islam M. Al-Akraa

Chemical Engineering

No abstract provided.