Chemical Engineering Commons^™

Evaluation Of Diode Laser Application On Chemical Analysis And Surface Microhardness Of White Spots Enamel Lesions With Two Remineralizing Agents, Lamiaa Mahmoud Moharam, Doaa Mohamed Sadony, Shaymaa Mohamed Nagi

Chemical and Biochemical Engineering Faculty Research & Creative Works

Background: To investigate the effect of diode laser application and two commercial remineralizing agents on the remineralization and surface microhardness of white spot enamel lesions. Material and Methods: Sixty specimens were prepared then equally divided into six groups (n=10/group), according to the diode laser and the two commercial remineralizing agents applied to demineralized enamel surfaces (APF gel and sodium fluoride NaF mousse) with or without diode Laser application as follows; Group A; control, Group B; diode Laser application, Group C; APF gel application, Group D; NaF mousse application, Group E; APF gel application + diode Laser, Group F; NaF mousse …

Rapid Self-Assembly Of Polymer Nanoparticles For Synergistic Codelivery Of Paclitaxel And Lapatinib Via Flash Nanoprecipitation, Shani L. Levit, Hu Yang, Christina Tang

Chemical and Biochemical Engineering Faculty Research & Creative Works

Taxol, a formulation of paclitaxel (PTX), is one of the most widely used anticancer drugs, particularly for treating recurring ovarian carcinomas following surgery. Clinically, PTX is used in combination with other drugs such as lapatinib (LAP) to increase treatment efficacy. Delivering drug combinations with nanoparticles has the potential to improve chemotherapy outcomes. In this study, we use Flash NanoPrecipitation, a rapid, scalable process to encapsulate weakly hydrophobic drugs (logP < 6) PTX and LAP into polymer nanoparticles with a coordination complex of tannic acid and iron formed during the mixing process. We determine the formulation parameters required to achieve uniform nanoparticles and evaluate the drug release in vitro. The size of the resulting nanoparticles was stable at pH 7.4, facilitating sustained drug release via first-order Fickian diffusion. Encapsulating either PTX or LAP into nanoparticles increases drug potency (as indicated by the decrease in IC-50 concentration); we observe a 1500-fold increase in PTX potency and a six-fold increase in LAP potency. When PTX and LAP are co-loaded in the same nanoparticle, they have a synergistic effect that is greater than treating with two single-drug-loaded nanoparticles as the combination index is 0.23 compared to 0.40, respectively.

Bone Marrow-Derived And Elicited Peritoneal Macrophages Are Not Created Equal: The Questions Asked Dictate The Cell Type Used, Cheryl M. Zajd, Alexis M. Ziemba, Grace M. Miralles, Terry Nguyen, Paul J. Feustel, Stanley M. Dunn, Ryan J. Gilbert, Michelle R. Lennartz

Chemical and Biochemical Engineering Faculty Research & Creative Works

Macrophages are a heterogeneous and plastic population of cells whose phenotype changes in response to their environment. Macrophage biologists utilize peritoneal (pMAC) and bone marrow-derived macrophages (BMDM) for in vitro studies. Given that pMACs mature in vivo while BMDM are ex vivo differentiated from stem cells, it is likely that their responses differ under experimental conditions. Surprisingly little is known about how BMDM and pMACs responses compare under the same experimental conditionals. While morphologically similar with respect to forward and side scatter by flow cytometry, reports in the literature suggest that pMACs are more mature than their BMDM counterparts. Given …

Synthesis And Characterization Of Chitosan Based Catalyst For Catalysis Applications, Hany A. Elazab, Yousab G. Remiz, Mostafa A. Radwan, M. A. Sadek

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this research, chitosan-based catalyst synthesis and characterization was investigated for different application in catalysis as chitosan-based catalyst was combined with metal oxides in order to be used in dye removal of methyl orange (MO). Diluted acetic acid was used to dissolve chitosan then different percentages for metallic ions were mixed with diluted chitosan and then, 500 µL were added to the sample to reduce the metal salts then, microwave was used to heat the mixture for 5 minutes and then dried at 80-100 °C. Finally, X- ray diffraction was used to confirm the catalyst prepared. The aim of this …

Development Of Novel Adsorbent For Industrial Wastewater Treatment, Hassaan M. Shehata, Dalia A. Ali, Islam M. Al-Akraa, Hoda A. Elsawy, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

The main objective of this research project is to perform some experimental procedures to inform the ability of the novel adsorbent used in this project. The chemical modification of the adsorbent is the chemical oxidation of pure powder chitosan using some specific redox pairs which are potassium dichromate and sodium bisulphite. After preparing the modified chitosan, there are some parameters that must be discussed during the adsorption process. The first parameter is the time parameter, showing experimentally the optimum time for adsorption under certain conditions by collecting values of absorbance and concentration of thymol blue adsorbed after the process from …

Mathematica As An Efficient Tool To Optimize The Kinetic Study Of Ethyl Acetate Hydrolysis, M. H. El Dewaik, Mamdouh Gadalla, M. A. Sadek, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

Mathematica is a powerful program for computing both numeric and algebraic calculations as well as graphing two- and three-dimensional curves and surfaces. It is used increasingly in many fields of science now such as physics, engineering, chemistry and even biology because of the fast interaction of mathematics with almost the fields of science nowadays. We report here, optimizing the kinetic data for the hydrolysis of ethyl acetate through caustic soda via using Mathematica.

Effect Of Tio2 Doping On Degradation Rate, Microstructure And Strength Of Borate Bioactive Glass Scaffolds, Romina Shafaghi, Omar Rodriguez, Sunjeev Phull, Emil H. Schemitsch, Paul Zalzal, Stephen D. Waldman, Marcello Papini, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

A titanium-containing borate glass series based on the system (52-X) B₂O₃–12CaO–6P₂O₅–14Na₂O–16ZnO-XTiO₂ with X varying from 0, 5 and 15 mol% of TiO2 incorporated, identified as BRT0, BRT1 and BRT3, respectively, were used in this study. Scaffolds (pore sizes, 165–230 μm and porosity, 53.51–69.51%) were prepared using a polymer foam replication technique. BRT3 scaffolds exhibited higher compressive strength (7.16 ± 0.22 MPa) when compared to BRT0 (6.02 ± 0.47 MPa) and BRT1 (5.65 ± 0.28 MPa) scaffolds with lower, or no, TiO₂ content. The solubility of the scaffolds decreased …

Full-Set Measurements Dataset For A Water-Based Drilling Fluid Utilizing Biodegradable Environmentally Friendly Drilling Fluid Additives Generated From Waste, Abo Taleb Al-Hameedi, Husam Hasan Alkinani, Shari Dunn-Norman, Mohammed M. Alkhamis, Justin D. Feliz

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The oil and gas industry is moving towards more environmentally friendly practices. The environmental regulations regarding drilling waste management and disposal are motivating the industry to be more efficient with drilling operations. Environmentally friendly drilling fluid additives used in drilling operations reduces not only the negative implications on the environment but also reduces costs. This paper provides an experimental dataset of utilizing biodegradable waste materials as environmentally friendly drilling fluid additives. The data were collected through experimental evaluations of several waste materials including Potato Peels Powder (PPP), Mandarin Peels Powder (MPP), Fibrous Food Waste Material (FFWM), Palm Tree Leaves Powder …

Experimental Investigation Of Bio-Enhancer Drilling Fluid Additive: Can Palm Tree Leaves Be Utilized As A Supportive Eco-Friendly Additive In Water-Based Drilling Fluid System?, Abo Taleb T. Al-Hameedi, Husam H. Alkinani, Shari Dunn-Norman, Mustafa A. Al-Alwani, Waleed H. Al-Bazzaz, Abdullah F. Alshammari, Hussien W. Albazzaz, Rusul A. Mutar

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Serious problems will be presented due to using conventional chemical additives to regulate the drilling mud properties, as they have health, safety, and environmental side effects. Thus, there is a considerable necessity for alternative multifunctional bio-enhancer drilling mud additives, which can assist in optimizing the drilling fluid specifications and enhance its effectiveness with the least effects on the environment and the drilling personnel safety. The effects of adding two concentrations of palm tree leaves powder (PTLP) to water-based mud were conducted under fresh and aged conditions using standard API drilling fluids testing methods such as rheometer/viscometer, pH meter and temperature, …

Experimental Investigation Of Environmentally Friendly Drilling Fluid Additives (Mandarin Peels Powder) To Substitute The Conventional Chemicals Used In Water-Based Drilling Fluid, Abo Taleb T. Al-Hameedi, Husam H. Alkinani, Shari Dunn-Norman, Mustafa A. Al-Alwani, Abdullah F. Alshammari, Mohammed M. Alkhamis, Rusul A. Mutar, Waleed H. Al-Bazzaz

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The non-biodegradable additives used in controlling drilling fluid properties cause harm to the environment and personal safety. Thus, there is a need for alternative drilling fluid additives to reduce the amount of non-biodegradable waste disposed to the environment. This work investigates the potential of using mandarin peels powder (MPP), a food waste product, as a new environmentally friendly drilling fluid additive. A complete set of tests were conducted to recognize the impact of MPP on the drilling fluid properties. The results of MPP were compared to low viscosity polyanionic cellulose (PAC-LV), commonly used chemical additive for the drilling fluid. The …

Efficient Catalytic Production Of Biodiesel Using Nano-Sized Sugar Beet Agro-Industrial Waste, Hosam H. Abdelhady, Hany A. Elazab, Emad M. Ewais, Mohamed Saber, Mohamed S. El-Deab

Chemical and Biochemical Engineering Faculty Research & Creative Works

This paper addresses the use of agro-industrial residue as a promising heterogeneous catalyst for the efficient production of biodiesel. That is, CaO-rich Sugarbeet agro-industrial waste (smashed down to nano-size) shows superb catalytic activity for biodiesel production via transesterification process employing sunflower oil and methanol. Physicochemical properties of the proposed catalyst are probed by TGA–DTG, XRF, XRD, FT-IR, SEM, BET, and CO2-TPD techniques. Biodiesel conversion (%) of Ca. 93% is achieved under the optimal conditions (catalyst loading of 1 wt%, methanol/oil molar ratio of 4.5:1, refluxed at 75 °C for 60 min). The relatively short reaction time indicates the enhanced kinetics …

Integrated Approach To Investigate The Wellbore Integrity Under Downhole Conditions, Weicheng Zhang

Doctoral Dissertations

“The integrity of the cement sheath is the key part to maintain zonal isolation and prevent the inter-zonal communication. Loads arising from multiple stages of wellbore life span may induce various modes of cement failure within the cement (disking and radial cracks) and at the cement-casing and the cement-formation interfaces (debonding fractures). This research utilizes the integrated laboratory and numerical approach to investigate the cement hardening process, to predict the cement failure under various loading conditions. An innovative experimental setup is established to measure the cement pore pressure variation during the hardening process under downhole conditions, and a staged 3D …

Investigation On Nanoparticle Based Combination Therapy For Targeted Cancer Treatment, Muhammad Raisul Abedin

Doctoral Dissertations

“The current treatment methods in cancer are associated with toxicity in healthy tissues, partial therapeutic response, drug resistance and finally recurrence of the disease. The cancer drugs are challenged by non-specific binding, undesired toxicity in healthy cells, low therapeutic index and finally poor therapeutic outcome. In this work, a targeted nanoscale therapeutic system Antibody Drug Nanoparticle (ADN) was engineered to selectively inhibit the breast cancer cell growth with reduced toxicity in healthy cells. The ADNs were designed by synthesizing rod shaped anoparticles using pure chemotherapeutic drug and covalently conjugating a therapeutic monoclonal antibody (mAb) on the surface of the drug …

Process Intensification Of Fuel Synthesis And Electrolysis, Jeremy Lee Hartvigsen

Doctoral Dissertations

”As more renewable energy is added to the electric grid, energy storage becomes a high priority. Suggestions have been made for energy storage in the form of fuel and chemicals. Currently, Solid Oxide Electrolysis systems can operate in endothermic mode and reduce the electrical requirement by supplying heat. Fuel synthesis from syngas is exothermic and can supply heat. However, the temperature mismatch in the normal operation of the electrolysis step and fuel synthesis step makes the direct utilization of this heat impossible. This work explores possibilities of alternate arrangements of coupling electrochemical systems and chemical synthesis. This work also explores …

Strategies To Improve The Electrochemical Performance Of Lithium-Ion Batteries By Stabilizing The Interface Of Electrode/Electrolyte, Ye Jin

Doctoral Dissertations

”Lithium-ion batteries (LIBs) provide great potential for electric vehicles, and smart grids as future energy-storage devices. However, there are many challenges in the development of the LIB industry, including low energy and power density of electrode materials, poor rate performance, short cycle life of electrode materials, and safety issues caused by the flammability of the conventional organic liquid electrolytes.

In this research, we were committed to using general approach to efficiently and economically synthesize or modify LIB materials by stabilizing the interface between electrode and electrolyte. Atomic layer deposition (ALD) method was used to coat metal oxide thin films on …

Catalytic Utilization Of Carbon Dioxide As Renewable Feedstock For Production Of Chemicals And Fuels, Abbas Alaa Jawad

Doctoral Dissertations

"The utilization of CO₂ as a renewable feedstock for producing commodity chemicals and fuels is an interesting challenge to explore new concepts and opportunities in catalysis and industrial chemistry. This sustainable approach not only leads to production of useful chemicals, but also has the potential to mitigate anthropogenic CO₂ emissions to the atmosphere. CO₂ itself is a sustainable and inexhaustibly available carbon source, however, it is inextricably linked to its inherent inertness. It is a thermodynamically stable molecule (ΔG_f = -394.01 kJ.mol^-1) with high oxidation state, hence, reactions of CO₂ must be combined …

Continuous-Flow Synthesis Of Fine Chemicals And Pharmaceutical Compounds Over Intelligent Organocatalysts With Bifunctional Reactivity, Abdo-Alslam Alwakwak

Doctoral Dissertations

“Many biological systems that utilize organic active sites to catalyze reactions under mild conditions invoke cooperative catalytic pathways, whereby two or more active sites work together to activate the reactant(s). The use of cooperative (bifunctional) catalysts and continuous flow chemistry (a reaction within the narrow channels of a micro‐ or microfluidic reactor) are commonplace in sustainable chemical transformation and attract a great deal of interest with respect to economic and environmentally-sustainable production of fine chemicals, pharmaceuticals, and agrochemicals, water treatment, as well as upgrading of biomass feedstocks. Although, some methods have been developed for immobilization of bifunctional catalysts for cooperative …

Enhanced Electrochemical Performance Of Li-Ion Battery Cathodes By Atomic Layer Deposition, Yan Gao

Doctoral Dissertations

”Li-ion battery now plays an irreplaceable role in supplying green and convenient energy. In this work, atomic layer deposition (ALD) was used to modify Li-ion battery cathode particles for performance enhancement.

An ultrathin and conductive CeO₂ ALD film was deposited on Li-rich layered cathode particles, of which the specific capacity and cyclic stability were significantly improved. On the same cathode particles, FeO_x ALD and post-annealing resulted in a stable and conductive surface spinel phase to improve the performance.

Synergetic TiN coating and Ti doping were performed on a LiFePO₄ (LFP) cathode and extended its cycle life. The …

Structured Catalysts Designed And Manufactured By 3d-Printing Technique For Functional Integration Of Catalytic Systems, Fatima Magzoub

Doctoral Dissertations

"Microporous zeolites are widely used as heterogeneous catalysts in a wide variety of chemical and petrochemical industries to produce value-added chemicals and fuels, owing to their large surface area, acid-base properties, high thermal stability, and excellent shape-selectivity.

The overall goal of this research was to shape engineer composite zeolites and fine-tune their physiochemical properties to improve the catalytic production of dimethyl ether (DME) and light olefins that are typically used as substitution to diesel fuel and polymer precursors, respectively. Specifically, HZSM-5 and silicalite-1 zeolites were formulated into monolithic contactors using 3D printing technique, followed by subsequent SAPO-34 crystals growth through …

Exploring Wellbore And Reservoir Temperature Profiles In Fluid Circulation And Production Operations, Ahmed Qasim Al Saedi

Doctoral Dissertations

"The wellbore heat flow occurs during different well operations resulting from any temperature differences between the wellbore fluid and the adjacent formation. Understanding the direction and mechanism of heat flow whether it is conduction or convection help to represent this heat exchange mathematically. However, the only available factor used to understand the heat flow behavior is the measured wellbore temperature which can be obtained from the direct measurement while drilling or circulation operations, well logging, well test, or from the production operations. Also, the initial geothermal formation temperature resulting from the geothermal gradient will help to understand the undistributed formation …

Investigating The Factors Impacting The Success Of Immiscible Carbon Dioxide Injection In Unconventional Shale Reservoirs: An Experimental Study, Sherif M. Fakher

Doctoral Dissertations

"Unconventional shale reservoirs are currently gaining significant interest due to the huge hydrocarbon volumes that they bear. Enhanced oil recovery (EOR) techniques have been suggested to increase recovery from shale reservoirs. One of the most promising EOR methods is gas EOR (GEOR), most notably carbon dioxide (CO₂). Not only can CO₂ increase oil recovery by interacting with the oil and the shale, but it has also been shown to adsorb to the shale rock and thus is effective in both EOR applications and also carbon storage purposes. This research aims to experimentally investigate several of the interactions …

Evaluation Of The Performance Of Different Polymer Gel Systems As An In-Depth Gel Treatment Using Numerical Simulation, Tariq K. Khamees

Doctoral Dissertations

"Oil production from heterogeneous and naturally fractured reservoirs are usually hindered due to the presence of high-permeability streaks and natural fractures networks. Oil production could be more lowered if there is a crossflow from the high- to the low-permeability layers and high mobility ratio. These problems are called conformance problems and the treatment is called conformance improvement technologies (CITs). The aims of CIT is to correct the heterogeneity of the reservoir and to lower the unfavorable mobility ratio. These technologies are leading to the diversion of post-treatment water into the low-permeability layers and to increase the viscosity of the displacing …

Experimental And Modeling Studies Using Packed Bed Reactors: Liquid Phase Ethylene Production By Hydrogenation Of Acetylene, Humayun Shariff

Doctoral Dissertations

"Gas-phase catalytic hydrogenation of acetylene to produce ethylene, commonly practiced in industries, has green oil formation, which leads to catalyst deactivation and sometimes reactor runaway risks due to high exothermicity. To overcome these issues as well as to increase the selectivity and conversion, liquid-phase hydrogenation of acetylene was investigated in packed bed reactors (PBR) using a commercial catalyst. The reactor performance of two-phase flow PBRs was assessed experimentally complemented by a validated mathematical model at different scales.

The selective hydrogenation of acetylene in the liquid phase over a commercial 0.5 wt% Pd/Al₂O₃ catalyst was investigated in a …

Polymeric Nanoparticle As A New Platform For High Removal Of Endotoxins From Biopharmaceutical Solutions, Sidharth Razdan

Doctoral Dissertations

"Presently, approximately one-third of all biopharmaceutical drugs are derived from biological sources like gram-negative bacteria. Gram-negative bacteria like E.coli are much cheaper to cultivate and provide higher biotherapeutic yield compared to mammalian cells. On extracting the useful biotherapeutics from the gram-negative bacterial cells (E.coli), endotoxin present in the bacteria is released in the surrounding media thus contaminating the lifesaving biotherapeutics. Application of the endotoxin-contaminated therapeutics to humans or animals can cause serious health issues like septic shock, tissue injury and ultimately death. Hence, thorough purification of biotherapeutics before parenteral application is necessary. Although there are multiple methods for …

Microgel Placement And Plugging Performance In Sand Filled Fracture For Conformance Control, Baihua Lin

Masters Theses

“Preformed particle gels (PPG) has been widely applied for conformance control in heterogeneous reservoirs with fractures and super-K channels. As a plugging agent, PPG could plug the fractures or high permeability streaks and divert the displacing fluid into low permeability matrix. Many studies have been conducted to investigate the potential of PPGs as a water cut reduction and improved oil recovery agent using homogeneous sandpacks or heterogeneous core samples with man-made open fractures. However, no research has been carried out to understand how PPG injection and plugging performance will be changed if the fractures are filled with sands. Herein, the …

Development Of Amine-Functionalized Mesoporous Alumina For Radioiodine Removal From Water, Mansour Mohammed Alsalbokh

Masters Theses

“Radioactive materials have spread due to careless disposal and nuclear disasters. Some radionuclides can exist in an aqueous media, like radioactive iodine. As a result, in this work amine-functionalized mesoporous alumina was developed to adsorb radioactive iodine from the liquid phase. Bismuth was incorporated, using a wet impregnation method, to test it as a possible silver replacement. Amine grafting was used to functionalize the surface of the mesoporous alumina. All materials prepared in this work were characterized by N₂ physisorption, FTIR and TGA to determine the textural properties, surface functionality, and amine loading. The synthesized materials were tested for …

Enhanced Water Electrolysis: Effect Of Temperature On The Oxygen Evolution Reaction At Cobalt Oxide Nanoparticles Modified Glassy Carbon Electrodes, Aya Akl, Hany A. Elazab, Mohamed A. Sadek, Mohamed S. El-Deab

Chemical and Biochemical Engineering Faculty Research & Creative Works

Water splitting producing hydrogen and oxygen gases appears promising in view of the increasing need of renewable energy sources and storage strategies. Investigation of stable and highly efficient electrocatalysts for oxygen evolution reaction (OER) is targeted in this study at cobalt oxide nanoparticle modified glassy carbon (nano-CoOx/GC) electrodes. The effect of the preparation (Tp) and measuring temperature (Tm) on the electrocatalytic activity of nano-CoOx/GC towards the OER is investigated under various operating conditions. Linear sweep voltammetry (LSV), cyclic voltammetry (CV) as well as SEM and XRD techniques were used to probe the electrocatalytic and morphological characteristics of nano-CoOx prepared under …

Emulsion Stability Of Heavy Oil With Surfactants And Nanoparticles, Zainab Abdulmohsein, Baojun Bai, Parthasakha Neogi

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The recovered crude oil is often in form of an emulsion and the recovery is cut off when water to oil ratio exceeds a certain amount. The emulsions vary from water-in-oil to oil-in-water and the step that follows is to coalesce droplets to get two continuous liquids. Difficulties arise when the oil contains emulsifiers. There are naturally occurring surfactants, or the oil recovered is by enhanced oil recovery techniques which have additives that stabilize the droplets. We have considered below a heavy oil (viscosity 650-750 mPa.s) containing one of the three surfactants: a nonionic surfactant or a cationic surfactant or …

Data Analytics Of Natural Gas Injection Enhanced Oil Recovery For Unconventional Reservoirs, Ali Waqar

Masters Theses

"Unconventional Enhanced Oil recovery, via the injection of natural gas has attracted great attention, as studies and projects have shown to be promising. An overview of pertinent studies has been carried out. Core Scale Laboratory Experiments, Core Scale Simulation, Field Scale simulation and pilot projects are analyzed. Data is collected for Core, Reservoir, Operational, and recovery information. Thereafter, Data analysis techniques are applied to identify data ranges, distributions, trends, relationships, and to eventually reach conclusions.

Huff and Puff injection is the preferred mode of injection, delivering most promising results for unconventional reservoirs. Across all the studies, with increase in amount …

Evaluation Of Eor Potential Of Low Salinity Polymer In Enhancing Heavy Oil Recovery On The Alaska North Slope, Shize Yin

Masters Theses

"Alaska's North Slope (ANS) contains vast amount of viscous oil resources that have not been extracted. This study focuses on the investigation over the potential shown by low-salinity polymer flooding in improving the recovery of ANS heavy oil through laboratory experiments.

At the beginning, coreflooding experiments were performed with silica sandpacks. The synergy between low-salinity water flooding and polymer flooding was proved, and the low-salinity polymer showed a better performance than the normal-salinity polymer. Further, the sandpacks prepared with formation sand from an oilfield on the ANS was then employed so as to simulate the reservoir condition. A series of …