Chemical Engineering Commons^™

Application Of Gas-Assisted Gravity Drainage (Gagd) Process For Enhancing Recovery From Unconventional Resources, Muzher Al Musabeh

LSU Doctoral Dissertations

The oil recovery with hydraulic fracturing has played an important role in hydrocarbon production and energy support last decade from unconventional resources. Characteristically, the significant production decline and low recovery factors from these reservoirs triggered the need for new EOR techniques to compensate for the decline and help sustain the production. In this study, an experimental investigation of the Gas-Assisted Gravity Drainage (GAGD) process in the presence of fractures as EOR process was conducted using Nitrogen (N2) and Carbon Dioxide (CO2) in Berea Sandstone (BSS) and Tuscaloosa Marine Shale (TMS). Core flooding and EOR experiments were used to determine the …

Investigating Black Silicon Surface Geometry Via Parameter Modification And Low Flow Inductively Coupled Plasma Deep Reactive Ion Etching, Noah Mulherin Smith

Honors Capstones

No abstract provided.

Engineering The Surface Of Fe3o4 Nanoparticles For Catalytic And Magnetic Applications, Natalia Da Silva Moura

LSU Doctoral Dissertations

With the rapid depletion of the U.S. energy resources coupled with population growth, heat management technologies must be improved to sustain our quality of life. Precisely, in catalysis, it is estimated that only ~50% of the energy supplied to the reactor is used for product conversion due to dissipation losses. Among the emerging technologies with a promising reduction in heat losses is induction heating, offering targeted heat delivery with magnetic nanoparticles. Under alternating magnetic fields (AMF), these nanoparticles can absorb the energy from Radio-Frequency (RF) fields and dissipate it as heat on the nanoparticle surface. This in situ heat generation …

Direct Activation Of Light Alkanes To Value-Added Chemicals Using Supported Metal Oxide Catalysts, Md Ashraful Abedin

LSU Doctoral Dissertations

One of the most challenging aspects of modern-day catalysis is the conversion of methane. Direct conversion of methane via dehydroaromatization (MDHA) is a well-known process which can produce valuable hydrocarbons. Mo oxide supported on ZSM-5/MCM-22 has been studied extensively in recent years for MDHA. Mo carbides are responsible for activating methane by forming CHx species. These are dimerized into C2Hy and oligomerized on ZSM-5/MCM-22 Brønsted acid sites to form aromatics. Sulfated zirconia (SZ) supported Mo catalyst contains the acid sites necessary to produce benzene in MDHA. Here, sulfated hafnia (SH), a homologous oxide like SZ, has been proposed to provide …

Degumming Of Hemp Fibers Using Combined Microwave Energy And Deep Eutectic Solvent, Bulbul Ahmed

LSU Master's Theses

Hemp is considered as one of the sustainable agricultural fiber materials. Degumming or surface modification of hemp bast is needed to produce single fibers for ensuing textile and industrial applications. The traditional degumming process necessitates a high amount of alkali, which causes detrimental environmental pollution. This study offers a new method to degum hemp fibers with reduced use of harmful alkali and precious water resources. In this work, hemp bast fibers were degummed by using combined microwave energy and deep eutectic solvent (DES). The properties of hemp fibers manufactured by this method were investigated and compared with the traditional alkali …

Gas Evolution Phenomenon Of Methane In Base Fluids Of Non-Aqueous Drilling Muds Under Controlled Depressurization, Damilola Ojedeji

LSU Master's Theses

As wells become more complex and drilling conditions to reach targets prove even more challenging, being able to detect influx event early and safely handle these influxes has become one of the most important focus areas for improvement in well control safety. The high solubility of formation gas in non-aqueous drilling fluids however makes kick detection and safe handling of kicks more complicated. Recent studies are beginning to incorporate desorption kinetics in well control models to simulate the transient multiphase flow phenomenon associated with gas kicks in non-aqueous drilling fluids to foster safe handling of kicks. However, there is currently …

Enhanced Oil Recovery In Tight Rocks Using The “Slot-Drill” Completion, Hassan Amer

LSU Master's Theses

Enhanced oil recovery (EOR) is essential in shale/tight formations because primary recovery typically produces less than 10% of the original hydrocarbon in-place (OHIP). This work presents a novel “slot-drill” EOR technology, which involves injecting gas through a horizontal fracture that is cut into the formation near the top of the reservoir (using a tensioned abrasive cutting cable mounted to the drillstring) and producing oil from a second slot-drilled horizontal fracture near the bottom of the reservoir.

The dusty-gas diffusion model was implemented in a compositional simulator to account for the diffusion mechanism expected during the injection of gases in this …

Blowout - Capping - Fracturing - Relief Well, A Full Cycle Workflow, Youssuf A. Elnoamany

LSU Master's Theses

Broaching is defined as the uncontrolled release of hydrocarbons to ocean seafloor after a loss of subsurface well control event. Failed attempts to cap the offshore wells undergoing worst case discharge may lead to hydraulic fracture initiation and subsequent propagation, leading to renewed release of hydrocarbon to the seafloor. During the capping stack shut-in process, pressure build-up will occur along the wellbore, exposing locations of possible fracture initiation to overpressurized fluid, such as directly below the casing shoe, and critical points along the well casing. Shall there be enough build-up pressure to exceed the minimum horizontal stress in an exposed …

Controlling The Orientation Of Fluorescent Dyes Using External Electric Fields, Henry J. Kantrow

Honors Capstones

No abstract provided.

High Temperature Polymer Electrolytes For Hydrogen Fuel Cells And Electrochemical Pumps, Gokul Venugopalan

LSU Doctoral Dissertations

Hydrogen fuel cell and separation technologies such as proton exchange membrane fuel cells (PEMFCs) and electrochemical hydrogen pump (ECHP) offer a profound advantage in the transition to a low-carbon economy. An imperative hitch in hydrogen fuel cells and ECHP technology has been the electrocatalyst poisoning by carbon monoxide (CO) and other contaminants in the reactant mixture. By operating, hydrogen fuel cells and ECHPs at high temperatures (>200 °C), the effect of CO adsorption on the electrocatalyst surface could be curtailed. The high-temperature operation of devices necessitates a proton exchange membrane (PEM) to operate under anhydrous conditions.

In this work, …

Evaluation Of Vertical And Horizontal Wells For Utilization In Carbon Sequestration, Michael R. Bohnet

Honors Capstones

No abstract provided.

Adsorption And Transport Of Colloids At Interface And In Bulk, Jingyun Lee

LSU Doctoral Dissertations

Colloids are suspensions of microscopic insoluble particles dispersed in a continuum phase such as liquid or gas. Colloids are found in our everyday life from food and cosmetic industries to pharmaceutical and biomedical applications. Depending on a global minimum of the free-energy landscape, colloidal suspensions can be classified as two major classes: equilibrium or active colloidal system. This Ph.D dissertation presents strategies to engineer equilibrium self-assembled structures and out-of-equilibrium active matter using various interparticle forces.

First, we introduce the means to promote the equilibrium self-assembled structures driven by adsorption of colloids at interface. Typically, adsorption of colloids at interface is …

Gold-Semiconductor Photocatalysts For Water Treatment Under Visible And Ultraviolet Light, Daniel Willis

LSU Doctoral Dissertations

Water scarcity threatens the lives of millions of people worldwide. It is imperative to improve the energy efficiency and affordability of water treatment methods to avoid a looming water-energy crisis. To meet this challenge, I have pursued research on the use of sunlight—our most reliable and abundant source of energy—to drive water treatment through photocatalysis. I explored the literature and found gold-semiconductor materials to hold promise for harvesting sunlight and catalyzing the breakdown of waterborne contaminants. Initially, I designed a novel optical cavity with gold (Au) nanoparticles on a zinc oxide / titania (TiO₂) / aluminum film stack …

Emulsion Templating Application For Synthesis Of A Porous Zein Biocompatible Oil Adsorbent, Nathan Holley

LSU Master's Theses

The recovery of spilled oil from water sources using hydrophobic porous absorbent has gained significant interest due to the ease of implementation, large-scale adaptability, and robust nature of the technique. However, the lack of biodegradability of these synthetic adsorbents has caused concern of further contaminating the environment from the generation of microplastic waste that is known to persist and accumulate in the marine food chain and other ecosystems. To mitigate this potential hazard, a new biocompatible alternative is needed to replace the non-degradable synthetic materials currently used. This thesis presents ZEin-based Low Density porous Absorbent (ZELDA), synthesized using a particle …

A Systematic Multiscale Investigation Of Nanoparticle-Assisted Co2 Enhanced Oil Recovery (Eor) Process For Shale Oil Reservoirs, Dayo A. Afekare

LSU Doctoral Dissertations

Shale oil reservoirs are prolific on the short term due to hydraulic fracturing and horizontal drilling but experience significant production decline, leading to poor ultimate recovery and leaving billions of barrels of oil buried in the ground. In this study, a systematic multi-scale investigation of an enhanced oil recovery (EOR) process using relatively inexpensive silicon dioxide nanoparticles and carbon dioxide for shale oil reservoirs was conducted. Using the Tuscaloosa Marine Shale (TMS) as a case study, aqueous dispersions of nanosilica in conjunction with CO₂ were investigated at nano-to-core scales. At the nanoscale, atomic force microscope was used to investigate …

Defect Engineering In Strained Low-Dimensional Abo3 Perovskite Nanoparticles For Next-Generation Energy Storage, Tochukwu Ofoegbuna

LSU Doctoral Dissertations

The realization of renewable energy is dependent on the advancement of multi-functional materials for energy storage devices. As an example, the substantial progress observed in Li-ion batteries is a result of the discovery and subsequent industrial commercialization of cathode materials such as LiFePO₄ (LFP). Although these materials possess relatively high specific capacity (~170 mAh/g), their low room-temperature electronic conductivity has been identified as a limitation for future high-performance batteries. Metastable SrBO₃, (SBO, B = Nb, Ta, Mo, etc.) perovskite nanoparticles (NPs) with metallic properties offer an alternative route to improve the room-temperature electronic conductivity of LFP cathodes. …

Experimental And Modeling Study Of The Effects Of Sealing Structures In Lost Circulation Prevention And Remediation, Mingzheng Yang

LSU Doctoral Dissertations

Drilling fluid lost circulation leads to non-productive time and increases the overall well cost. In general, wellbore strengthening and lost circulation control are achieved by creating effective sealing structures to inhibit fluid flow through loss conduits such as formation fractures. This research aims at better understanding the effects of sealing structures in fluid loss prevention and remediation, and providing useful references to effectively establishing filtercakes on the wellbore and plugs in the fracture.

Recent research on wellbore strengthening disclosed the critical role of filtercake in sealing microfractures during the initial stages of fracture initiation and propagation. The performance of a …

Photoluminescent Nanomaterials For Biosensing And Single Cell Analysis Applications, Khashayar Ramezani Bajgiran

LSU Doctoral Dissertations

The bioanalytical industry is projected to generate $36 billion by 2025, with the United States currently holding 80.9% of the consumers’ market. Among the bioanalytical platforms, point-of-care (POC) and point-of-use diagnosis (POU) have gained a lot of attention due to their emphasis on decentralized testing and providing low-cost solutions in resource-limited regions. While Traditional bioanalytical tools such as enzyme-linked immunosorbent assay and flow cytometry can sensitively detect biomolecules and screen single-cell response, they suffer from multiple drawbacks such as the high cost of antibodies and time-intensive procedures, which limit their ability to expand to POC/POU applications. Rapid developments in microtool …

A Microscale Approach To Investigate Breast Cancer Cellular Communication And Migration, Sharif Mohammad Mizanur Rahman

LSU Doctoral Dissertations

Metastatic breast cancer significantly decreases patient survival, with the majority of deaths caused by secondary metastasis. Cancer metastasis is a multi-step process that starts with the detachment of a cancer cell from the primary tumor and ends with establishing a secondary tumor at a distal location. This work's focus was to use an interdisciplinary microscale approach to study how cancer cells respond to neighboring cells and how they migrate in response to chemical gradients. Two distinct devices, a microfluidic device, and a 3D-printed plate insert, were developed to perform co-culture studies to elucidate the impact of ASCs on cancer cell …

An Improved Foam Modeling Technique And Its Application To Petroleum Drilling And Production Practice, Yanfang Wang

LSU Doctoral Dissertations

Foam is one of the most common used multiphase fluid in Underbalanced Drilling (UBD) and Managed Pressure Drilling (MPD). Because of its low density, high capacity of lifting and carrying cuttings, low cost and compatibility with formations, foam has become more superior than the conventional drilling mud when depleted reservoir pressure, severe lost circulation, or unstable borehole are encountered. In general, the success of foam applications rely on the understanding of the fundamentals of foam rheology in downhole conditions.

Foam rheology has been studied for decades. Conventional foam rheological models such as Power Law, Bingham Plastic, Herschel-Bulkley to explain foam …

Machine Learning Based Applications For Data Visualization, Modeling, Control, And Optimization For Chemical And Biological Systems, Yan Ma

LSU Doctoral Dissertations

This dissertation report covers Yan Ma’s Ph.D. research with applicational studies of machine learning in manufacturing and biological systems. The research work mainly focuses on reaction modeling, optimization, and control using a deep learning-based approaches, and the work mainly concentrates on deep reinforcement learning (DRL). Yan Ma’s research also involves with data mining with bioinformatics. Large-scale data obtained in RNA-seq is analyzed using non-linear dimensionality reduction with Principal Component Analysis (PCA), t-Distributed Stochastic Neighbor Embedding (t-SNE), and Uniform Manifold Approximation and Projection (UMAP), followed by clustering analysis using k-Means and Hierarchical Density-Based Spatial Clustering with Noise (HDBSCAN). This report focuses …

Fluid-Driven Fracture Initiation From Oil And Gas Wells Considering Lifetime Stresses, Andreas Michael

LSU Doctoral Dissertations

Fluid-driven fracture initiation from oil and gas wells is examined in detail. The dissertation covers three subtopics: drilling, completion (stimulations), and post-blowout capping-induced fracture initiation.

Drilling-induced tensile fractures (DITFs) are located in an azimuth orthogonal to wellbore breakouts and are observed from image logs obtained during drilling operations. Fully analytical criteria for the orientation of DITFs initiating from wells in porous, permeable media are derived considering fluid infiltration from a pressurized wellbore. DITF orientation (longitudinal or transverse-to-the-wellbore) is used to constrain the magnitude of the local maximum horizontal principal stress. The range of the possible stress states is indicated on …

Incorporation Of Lignin In Natural And Synthetic Biomaterials To Alter Mechanical And Biochemical Properties For Enhanced Wound Healing, Jorge Alfonso Belgodere

LSU Doctoral Dissertations

It is estimated that chronic, non-healing wounds affect more than 6.5 million Americans annually, with an estimated healthcare cost beyond $14 billion. Here, we attempted to create composites of natural (collagen type I or gelatin-methacrylate) or synthetic (poly(ethylene glycol) polymers incorporating a natural plant component, lignin, to combat the costs and limitations current wound healing methods face. Three-dimensional matrices of collagen type I (Col I) are widely used in tissue engineering applications for its abundance in many tissues, bioactivity with many cell types, and excellent biocompatibility. Inspired by the structural role of lignin in plant tissue, we found that sodium …

Adsorption And Reconfiguration Of Amphiphiles At Silica-Water Interfaces: Role Of Electrostatic Interactions, Van Der Waals Forces And Hydrogen Bonds, Yao Wu

LSU Doctoral Dissertations

The ability to explore and predict metastable structures of hybrid self-assemblies is of central importance for the next generation of advanced materials with novel properties. As compared to their thermodynamically stable forms, the kinetically stabilized materials show improved functionality potentially over their stable counterparts. The self-assembly processes usually originate from weak intermolecular interactions, involving a dynamic competition between attractive and repulsive interactions. These weak forces, including van der Waals (vdW), electrostatic interaction and the hydrogen bonding (H-bonding), can be tuned by external stimuli, e.g., confinement, temperature and ionization, and consequently driving hybrid materials into different configurations. It is challenging to …

Modulating Mechanical Properties Of Polymer Composites Via Colloidal Particle Reinforcement, Yusheng Guo

LSU Master's Theses

Additive manufacturing allows the rapid process of complex objects with excellent design flexibility. However, the products often exhibit poor mechanical properties when pure polymer is applied as printable material. In this work, we demonstrate that printability of polymer can be dramatically improved when particle filler is added to form reinforced polymer composites. Furthermore, the interaction between filler and polymer matrix leads to the enhancement in mechanical properties of the printed product. The material reinforcement induced by addition of fillers enables the wide application of polymer composites to print structures with unique features. In the printing of silica-reinforced pNIPAM composite, we …

Air Quality Improvement During Triple-Lockdown In The Coastal City Of Kannur, Kerala To Combat Covid-19 Transmission, C. T. Resmi, T. Nishanth, M. K. Satheesh Kumar, M. G. Manoj, M. Balachandramohan, K. T. Valsaraj

Faculty Publications

The novel SARS-CoV-2 coronavirus that emerged in the city of Wuhan, China, last year has since become the COVID-19 pandemic across all continents. To restrict the spread of the virus pandemic, the Government of India imposed a lockdown from 25 March 2020. In India, Kannur district was identified as the first "hotspot" of virus transmission and a "triple-lockdown" was implemented for a span of twenty days from 20 April 2020. This article highlights the variations of surface O-3, NO, NO2, CO, SO2, NH3, VOC's, PM10, PM2.5 and meteorological parameters at the time of pre-lockdown, lockdown and triple-lockdown days at Kannur …

Pressure Monitoring For Subsurface Leakage Characterization, Mojtaba Mosaheb

LSU Doctoral Dissertations

Undesirable leakage from underground sedimentary formations is a matter of considerable concern due to implications for water resources contamination and greenhouse gas emissions. Leakage in underground formations can remain undetected for a long period. Pressure monitoring is a dynamic method that can be used for leakage detection and characterization. The pressure signals are affected by the hydraulic characteristics of the reservoir media and leakage pathways. Consequently, the pressure data can be interpreted to obtain information about the hydraulic characteristics of the system. Pressure interpretation is useful for early leakage detection, because the pressure signals travel fast in reservoir media. In …

Brominated Carbon Materials As Positive Electrodes For Nonaqueous Secondary Lithium-Bromine Batteries, Benjamin Beau Peterson

LSU Doctoral Dissertations

Secondary lithium-bromine (Li-Br₂) batteries have theoretical potentials near 4.1 V vs Li/Li⁺ and capacities more than 2 times greater than conventional Li-ion batteries. Herein, secondary, non-aqueous Li-Br₂ half-cell batteries are reported using a Li metal anode, carbon-coated glass fiber separator, non-aqueous Li-based electrolytes with and without the addition of lithium bromine (LiBr) salt, and positive electrodes consisting of either chemically brominated non-graphitic carbon or carbon derived from the carbonization of metal-organic frameworks (MOFs) with LiBr embedded into the micro- and mesopores of the carbon matrix. The separator is effective in mitigating the transport of Br_{2 …}

Metabolic Network Analysis Of Filamentous Cyanobacteria, Daniel Alexis Norena-Caro

LSU Doctoral Dissertations

Cyanobacteria were the first organisms to use oxygenic photosynthesis, converting CO₂ into useful organic chemicals. However, the chemical industry has historically relied on fossil raw materials to produce organic precursors, which has contributed to global warming. Thus, cyanobacteria have emerged as sustainable stakeholders for biotechnological production. The filamentous cyanobacterium Anabaena sp. UTEX 2576 can metabolize multiple sources of Nitrogen and was studied as a platform for biotechnological production of high-value chemicals (i.e., pigments, antioxidants, vitamins and secondary metabolites). From a Chemical engineering perspective, the biomass generation in this organism was thoroughly studied by interpreting the cell as a microbial …

Data-Driven Modeling And Prediction For Reservoir Characterization And Simulation Using Seismic And Petrophysical Data Analyses, Xu Zhou

LSU Doctoral Dissertations

This study explores the application of data-driven modeling and prediction in reservoir characterization and simulation using seismic and petrophysical data analyses. Different aspects of the application of data-driven modeling methods are studied, which include rock facies classification, seismic attribute analyses, petrophysical properties prediction, seismic facies segmentation, and reservoir dimension reduction.

The application of using petrophysical well logs to predict rock facies is explored using different data analytics methods including decision tree, random forest, support vector machine and neural network. Different models are trained from a set of well logs and pre-interpreted rock facies data. Among the compared methods, the random …