Open Access. Powered by Scholars. Published by Universities.®
Articles 571 - 600 of 656
Full-Text Articles in Chemical Engineering
Microbial Conversion Of Cellulose To Sugars By Bacterial Enzyme, Kessara Seneesrisakul
Microbial Conversion Of Cellulose To Sugars By Bacterial Enzyme, Kessara Seneesrisakul
Chulalongkorn University Theses and Dissertations (Chula ETD)
This work studied the conversion of lignocellulosic materials to sugars, the intermediates for bioethanol production, by a bacterial enzyme. Due to the complex structure of lignocellulose, a cellulase enzyme cannot effectively access and hydrolyse cellulose fibers. Various pretreatment processes of lignocellulose have been studied to enhance enzymatic hydrolysis to date. In this work, corncob was firstly studied for microbial pretreatment using three microorganisms including two bacterial strains of Bacillus subtilis A 002 and Cellulomonas sp. TISTR 784 and a fungal strain of Phanerochaete sordida SK7. The results showed that the microbial pretreatment with P. sordida SK7 was the most effective …
Effects Of Bead Size And Concentration Of Unstable Asphaltenes Obtained From Different Centrifugation Techniques On Asphaltene Deposition In Packed Bed Apparatus, Kimchhay Lao
Chulalongkorn University Theses and Dissertations (Chula ETD)
Asphaltenes are the heaviest and most polar fraction of petroleum crude oil. They are the collection of components that can be soluble in aromatics solvents such as benzene or toluene, but insoluble in normal alkanes, n-pentane, n-hexane, or n- heptane. Asphaltenes are a class of molecules consisted of grouped aromatic rings with alkane chains. Changing pressure, temperature, composition, and shear rate during transportation can cause precipitation and deposition, resulting in reduced reservoir productivity due to restricted flow lines, fouling and blockages in the pore spaces of the reservoir. The goal of this investigation is to assess validity of two aspects …
Adsorptive Bubble Separation For Oil Removal, Paweena Kanokkarn
Adsorptive Bubble Separation For Oil Removal, Paweena Kanokkarn
Chulalongkorn University Theses and Dissertations (Chula ETD)
This present work emphasized on the current knowledge regarding (i) feasibility of multi-stage forth flotation operation for oil removal, and (ii) comprehension of dynamic surface tensions of surfactant solutions in relation to foam characteristics. A multi-stage forth flotation efficiency depends on the enhancement of interfacial adsorption and the number of bubble caps and tray. The operational parameters including foam height, air flow rate and feed flow rate were controlled to obtain the optimum process performance. Under the optimum conditions—a number of trays of 4, a foam height of 60 cm, an air flow rate of 40 L/min, a feed flow …
Investigation Of Asphaltene Aggregation Kinetics In The Presence Of Water-In-Oil Emulsion, Penpitcha Roengsamut
Investigation Of Asphaltene Aggregation Kinetics In The Presence Of Water-In-Oil Emulsion, Penpitcha Roengsamut
Chulalongkorn University Theses and Dissertations (Chula ETD)
Asphaltene is a component of the petroleum liquid defined operationally. It represents the most refractory (or the heaviest fraction). It is well-known that changes in temperature, pressure, or composition can destabilize asphaltenes and cause aggregation and deposition in porous formations, production lines, and processing facilities (Sheu and Mullins 1995). This leads to the study of the behavior of asphaltene aggregation and parameters that could affect the rate of aggregation which, in this case, is water-in-oil emulsion. In addition, the asphaltene aggregation model derived by Haji-Akbari (2013) is applied as a framework in this study which explains the correlation between the …
Study On Energy Storage Ability Of Zno/Tio2 For Photocatalytic Degradation Of Isopropanol, Ratchawan Jarumanee
Study On Energy Storage Ability Of Zno/Tio2 For Photocatalytic Degradation Of Isopropanol, Ratchawan Jarumanee
Chulalongkorn University Theses and Dissertations (Chula ETD)
The photocatalytic degradation of isopropanol under UV irradiation was studied by using p-n junction of ZnO/TiO2 photocatalysts prepared by sol-gel technique. Their energy storage ability was tested with their photocatalytic activity where there was no UV illumination. That was investigated by illumination the system with UV light for 2 h and off for 2 h until 8 h. The composition and surface structure of the catalyst were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), surface area analysis, and particle size analysis. The change in the isopropanol concentration was observed by using gas chromatography. The result showed that the …
Vegetable Oil Based Microemulsion Biofuels, U-Larak Peson
Vegetable Oil Based Microemulsion Biofuels, U-Larak Peson
Chulalongkorn University Theses and Dissertations (Chula ETD)
The growth of energy demand increases dramatically which has resulted in an increase of exhaust emissions to air quality deterioration. Therefore, there are driving forces in the development of renewable energy production technologies. Vegetable oils based reverse micelle microemulsions have been increased in attention for biofuel production. This work aims to formulate microemulsion biofuel containing palm oil/diesel blend as nonpolar phase, and ethanol/butanol, as a polar phase. The nonionic alcohol ethoxylate surfactant with the different numbers of EO groups, EOn (n=1, 3, 5, and 9) were selected as a stabilizing agent. A pseudo-ternary phase diagram was conducted to determine an …
Improvement Of Life Cycle Assessment Software And Its Applications, Yodsathorn Chavewanmas
Improvement Of Life Cycle Assessment Software And Its Applications, Yodsathorn Chavewanmas
Chulalongkorn University Theses and Dissertations (Chula ETD)
LCSoft is Life Cycle Assessment (LCA) software which developed for perform LCA together with process design. It is a stand-alone tool with ability to be integrated with other process design tools such as process simulation software (PROII/ASPEN), economic analysis tool (ECON), and sustainable process design tool (SustainPro). In addition, several optional interpretation features are available such as, sensitivity analysis, alternative comparison, and eco-efficiency evaluation. In this research, LCSoft had been improved in performance and application range. The development framework consisted of four tasks. The first task deals with improvement of LCI and LCIA calculation which new pathway for calculation and …
Methane Adsorption By Carbon Molecular Sieve Derived From Polycarbonate And Polyaniline, Jakchai Thawornwatthanasirikul
Methane Adsorption By Carbon Molecular Sieve Derived From Polycarbonate And Polyaniline, Jakchai Thawornwatthanasirikul
Chulalongkorn University Theses and Dissertations (Chula ETD)
The adsorptions of methane by carbon molecular sieves (CMS) were investigated at 35°C and 45°C by volumetric apparatus with the pressure range from 0 to 800 psia. CMS was prepared from polymer precursors such as polycarbonate (PC) and polyaniline (PANI) by carbonization under nitrogen inert atmosphere and activation by CO2 at temperature 700, 800 and 900°C. The yield of CMS is decreased with increasing carbonization and activation temperature. The methane adsorption capacity at 35°C of CMS derived from PC is 2.82 mmol CH4/g. The methane adsorption of the samples from PC is higher than those obtained from PANI for the …
Effect Of Oxygen-Containing Functional Groups On Methane Adsorption By Activated Carbon, Kittima Dheerapreampree
Effect Of Oxygen-Containing Functional Groups On Methane Adsorption By Activated Carbon, Kittima Dheerapreampree
Chulalongkorn University Theses and Dissertations (Chula ETD)
Natural gas has been applied as a fuel for vehicle because it is cheaper and cleaner burning than other fuels. In the vehicle, natural gas is ordinarily reserved by compressing and storing under high pressure at room temperature but this method has several limitations (e.g. low energy density, high weight of tank). Therefore, a porous material with high specific surface area (e.g. activated carbon) is suggested to eliminate the limitations of natural gas storage by compression, natural gas is adsorbed at relatively low pressure and room temperature. The adsorption capacity of activated carbons is related with their physical and chemical …
The Incipient Layer Of Wax Deposit, Tunya Ketjuntiwa
The Incipient Layer Of Wax Deposit, Tunya Ketjuntiwa
Chulalongkorn University Theses and Dissertations (Chula ETD)
The formation of the incipient layer of wax deposit when waxy oil is exposed to a cold surface is studied. Using a cold-finger apparatus, the evolution of deposit thickness is monitored with a video camera, allowing one to resolve the deposit layer formation from inception up to long times where deposit thickness no longer times where deposit thickness no longer grows. Characterization of wax deposits show that incipient layer has identical composition to waxy oil, indicating that deposit is not formed by a diffusion process. Modelling shows deposit formation at the investigated conditions cannot be explained by a diffusion process.
Material Flow Analysis (Mfa) Study For Sustainable Management Of Pvc Wastes In Thailand (Phase Iii), Wikanda Khomchu
Material Flow Analysis (Mfa) Study For Sustainable Management Of Pvc Wastes In Thailand (Phase Iii), Wikanda Khomchu
Chulalongkorn University Theses and Dissertations (Chula ETD)
Polyvinyl chloride (PVC) products are used for domestic consumption more than 400,000 tons annually and tend to be increasing in Thailand. After discarded, these products will become wastes which are being accumulated and could cause several environmental problems if they are disposed by inappropriate method. In previous studies, our group investigated the material flow of PVC in Thailand to handle the PVC waste problems. Material Flow Analysis (MFA) model was developed to estimate the quantity and route of PVC wastes in Thailand. Furthermore, the primary data were collected from recycle shops and landfill sites were used to estimate the amount …
Catalytic Activity Study Of Nixsny Intermetallics, Anchernsiri Noomnual
Catalytic Activity Study Of Nixsny Intermetallics, Anchernsiri Noomnual
Chulalongkorn University Theses and Dissertations (Chula ETD)
Cinnamyl alcohol (COL), versatile chemical in fragrance, flavoring, and pharmaceutical industries, can be found in only small amounts in nature. Generally, COL can be synthesized via selective hydrogenation of cinnamaldehyde (CALD), natural oil, at aldehyde functional group under high pressure of hydrogen gas. In this work, NixSny intermetallics were used as catalysts in selective hydrogenation to obtain COL. These catalysts were synthesized via mechanical alloying, economic and environmental method, and characterized by X-ray diffraction (XRD). By using 43, 58, and 75% tin contents with nickel, Ni3Sn, Ni3Sn2, and Ni3Sn4 intermetallics were prepared, respectively. In addition, formic acid was used as …
Electrical Property-Investigation Of Porous Clay Heterostructures Derived From Naturally-Occurring Clay Minerals For Smart Packaging, Kornkamol Srithammaraj
Electrical Property-Investigation Of Porous Clay Heterostructures Derived From Naturally-Occurring Clay Minerals For Smart Packaging, Kornkamol Srithammaraj
Chulalongkorn University Theses and Dissertations (Chula ETD)
Porous Clay Heterostructure (PCH) is an interesting material to use as entrapping system such as ethylene scavenger, respected to its high surface area with uniform and specific pore size. PCHs have been prepared by the surfactant-directed assembly of mesostructured silica within the two-dimensional galleries of clays. Then, the PCH was synthesized within the galleries of Na-bentonite clay by the polymerization of tetraethoxysilane (TEOS) in the presence of surfactant micelles. In addition, mesoporous clay with organic-inorganic hybrid (HPCH) is modified via co-condensation reaction of TEOS with candidate conductive functional groups (thiol group) and metal loading (silver), designated as MPPCH and Ag-PCH, …
Study The Best Support For Hydrolysis Of Tiger Grass, Kurizara Sayamnikorn
Study The Best Support For Hydrolysis Of Tiger Grass, Kurizara Sayamnikorn
Chulalongkorn University Theses and Dissertations (Chula ETD)
Bioethanol, one of the outstanding biofuels, is not only a renewable bio-based resource, but also interesting to research for improving better properties of the enzyme needed in the hydrolysis process. The purpose of this work is to study how to reuse the enzyme used in the hydrolysis step for bioethanol production by immobilizing Trichoderma reesei (T.reesei) on various silica supports, namely, SBA-15, TUD-1, and MCM-48. The amount of the adsorbed enzymes was determined by UV-visible spectrophotometry. Among those studied supports, SBA-15 showed 100% enzymatic adsorption on the support owing to its larger pore diameter of 6.14 nm, which is large …
Development Of Pedot-Pss/Zeolite Composite As A Gas Sensor, Pojjawan Chanthaanont
Development Of Pedot-Pss/Zeolite Composite As A Gas Sensor, Pojjawan Chanthaanont
Chulalongkorn University Theses and Dissertations (Chula ETD)
Composites with Poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonic acid), PEDOT-PSS, as the matrix containing zeolites of various Si/Al ratios in the range of 23-280 were fabricated to investigate the effect of Si/Al ratios on electrical conductivity sensitivity responses towards the target gas. The electrical conductivity responses of PEDOT-PSS/Zeolite composites were altered due to the available adsorption sites for gas molecules. The addition of zeolites to the pristine PEDOT-PSS improves the electrical conductivity sensitivity of the composites by enhancing the interaction between PEDOT-PSS and target gas. Composites with PEDOT-PSS matrix containing faujasite zeolites type Y were fabricated to investigate the effects of …
Development Of Water-Based Adhesives For Oriented Polypropylene (Opp) Lamination, Sarocha Ruanpan
Development Of Water-Based Adhesives For Oriented Polypropylene (Opp) Lamination, Sarocha Ruanpan
Chulalongkorn University Theses and Dissertations (Chula ETD)
Eco-friendly laminating adhesive has been developed for flexible packaging industries due to urgent restriction of volatile organic compounds (VOCs) emissions from anthropogenic sources. The water-based polyurethane laminating adhesive was derived by a condensation polymerization of isophorone diisocyanate, polypropylene glycol and 2,2-bis(hydroxymethyl)propionic acid, while the water-based polyacrylate laminating adhesive was synthesized by an emulsion polymerization of 2-ethylhexyl acrylate, ethylene glycol methyl ether acrylate, styrene, 2-hydroxyethyl methacrylate and acrylic acid. The parameters influencing the adhesive's performance consisted of chemical composition, reinforcing fillers and manufacturing processes. Among those parameters, the fabrication of waterborne core-shell polyacrylate laminating adhesive through a two-stage seeded semi-batch emulsion …
ผลของสารตัวเติมพอลิอะนิลีน-กรดโดเดซิลเบนซีนซัลโฟนิกต่อสมบัติของแผ่นนำไฟฟ้าคาร์บอนคอมพอสิต, กิตติพงษ์ เรือนคำ
ผลของสารตัวเติมพอลิอะนิลีน-กรดโดเดซิลเบนซีนซัลโฟนิกต่อสมบัติของแผ่นนำไฟฟ้าคาร์บอนคอมพอสิต, กิตติพงษ์ เรือนคำ
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้ศึกษาผลของสารตัวเติมพอลิอะนิลีน-กรดโดเดซิลเบนซีนซัลโฟนิก (DBSA-PANI) ต่อสมบัติของแผ่นนำไฟฟ้าคาร์บอนคอมพอสิต (แกรไฟต์/เรซินอิพ็อกซี) ส่วนแรกศึกษาสัดส่วนของแกรไฟต์ที่เหมาะสมและภาวะในการขึ้นรูป พบว่าปริมาณแกรไฟต์ที่เหมาะสมคือร้อยละ 85 โดยน้ำหนัก ให้ค่าการนำไฟฟ้าในแนวระนาบและแนวทะลุผ่านคือ 67 และ 27 ซีเมนต์ต่อเซนติเมตร ตามลำดับ ค่าความทนต่อแรงดัดโค้ง 32 เมกะพาสคัล ความหนาแน่น 1.98 กรัมต่อลูกบาศก์เซนติเมตร ค่าการดูดซึมน้ำร้อยละ 0.69 และความเป็นรูพรุนร้อยละ 1.37 สำหรับภาวะในการขึ้นรูปพบว่า เมื่อใช้ความดันกดอัดในช่วง 12 - 16 เมกะพาสคัล จะทำให้สมบัติเชิงกลด้อยลงและการดูดซึมน้ำเพิ่มมากขึ้น เมื่อใช้อุณหภูมิในช่วง 100 - 190 องศาเซลเซียส คอมพอสิตจะมีสมบัติเชิงกลดีขึ้นและค่าการดูดซึมน้ำลดลง ส่วนเวลาในการอัดขึ้นรูปคอมพอสิตในช่วง 5 - 60 นาที พบว่าการใช้ระยะเวลามากในการขึ้นรูปจะทำให้สมบัติเชิงกลและการดูดซึมน้ำของคอมพอสิตดีขึ้น การศึกษาในส่วนที่สองเป็นการศึกษาผลของ DBSA-PANI ที่เติมลงในคอมพอสิตของแกรไฟต์/เรซินอิพ็อกซี ที่มีแกรไฟต์ร้อยละ 85 โดยน้ำหนัก พบว่าปริมาณของ DBSA-PANI ที่เติมลงในคอมพอสิตของแกรไฟต์/เรซินอิพ็อกซีแล้วส่งผลให้คอมพอสิตมีสมบัติดีที่สุดคือร้อยละ 1 โดยน้ำหนัก ซึ่งให้ค่าการนำไฟฟ้าในแนวระนาบคือ 73 ซีเมนต์ต่อเซนติเมตร การนำไฟฟ้าในแนวทะลุผ่านคือ 33 ซีเมนต์ต่อเซนติเมตร ค่าความทนต่อแรงดัดโค้ง 27 เมกะพาสคัล ค่าการดูดซึมน้ำร้อยละ 0.97 ค่าความเป็นรูพรุนร้อยละ 1.8 และมีความหนาแน่น 1.87 กรัมต่อลูกบาศก์เซนติเมตร
การออกแบบไซโคลนโดยจำลองกระบวนการและการพิมพ์สามมิติ, จิรวัฒน์ จึงเจริญสุขยิ่ง
การออกแบบไซโคลนโดยจำลองกระบวนการและการพิมพ์สามมิติ, จิรวัฒน์ จึงเจริญสุขยิ่ง
Chulalongkorn University Theses and Dissertations (Chula ETD)
การเผาไหม้เชื้อเพลิงซากดึกดำบรรพ์ และชีวมวล ภายใต้กระบวนการทางความร้อนในการผลิตไฟฟ้าของอุตสาหกรรมต่างๆ มักพบสารประกอบอนินทรีย์ในเถ้า ซึ่งเป็นมลพิษทางอากาศ ปะปนออกมากับแก๊สผลิตภัณฑ์หลังการเผาไหม้ นักวิจัยจึงพยายามจะหาวิธีแยกเถ้า หรือ อนุภาคของแข็ง เหล่านี้ออกจากแก๊สผลิตภัณฑ์ อุปกรณ์ที่ใช้กันอย่างแพร่หลายคือ ไซโคลน เนื่องจากไซโคลนสามารถสร้างได้ง่าย ค่าใช้จ่ายในการบำรุงรักษาต่ำ โดยใช้แรงเหวี่ยงหนีศูนย์กลางและแรงโน้มถ่วงในการแยกอนุภาคของแข็งออกจากแก๊ส ปัจจุบันมีการพัฒนาไซโคลนให้มีรูปร่างต่างๆ แต่ยังขาดงานวิจัยที่ศึกษาความสัมพันธ์ระหว่างรูปร่างไซโคลนกับประสิทธิภาพการแยกทั้งในเชิงคำนวณและเชิงทดลอง โดยงานวิจัยนี้จะแบ่งการศึกษาออกเป็น 3 ส่วน คือ การหาแบบการจำลองและภาวะที่เหมาะสมสำหรับการจำลองพลศาสตร์ของไหลเชิงคำนวณของไซโคลนในระบบสามมิติจากการทดลองของ Azadi และคณะ เพื่อนำมาศึกษาผลของความดันลด และประสิทธิภาพในการแยกของไซโคลนรูปร่างต่างๆ ที่ปรับเปลี่ยนจากไซโคลนสแตมาน และสร้างไซโคลนสแตมานต้นแบบด้วยเทคโนโลยีการพิมพ์สามมิติซึ่งมีความสามารถในการปรับแต่งรูปร่างสูง พร้อมทั้งเปรียบเทียบผลจากการทดลองไซโคลนต้นแบบกับผลจากการจำลองพลศาสตร์ของไหลเชิงคำนวณ ผลที่ได้พบว่า แบบจำลองที่เหมาะสมต่อการใช้ในการศึกษาพฤติกรรมการไหลของไซโคลนในระบบสามมิติ คือ RNG k-epsilon model ที่มีสัดส่วนโดยปริมาตรของของแข็งเท่ากับ 6×105 และมีความเร็วทางเข้าเท่ากับ 15 เมตรต่อวินาที โดยได้นำมาศึกษาผลของไซโคลนในรูปร่างต่างๆ ดังนี้ ไซโคลนสแตมาน ไซโคลนที่มุมของทางเข้าเพิ่ม 15 องศา ไซโคลนที่มุมของทางเข้าเพิ่ม 30 องศา ไซโคลนที่มุมของทางเข้าเพิ่ม 45 องศา ไซโคลนที่มุมของทางเข้าลดลง 15 องศา ไซโคลนที่มุมของทางเข้าลดลง 30 องศา ไซโคลนที่มุมของทางเข้าลดลง 45 องศา ไซโคลนที่เพิ่มขนาดเส้นผ่านศูนย์กลางทางออกแก๊ส 10% และ ไซโคลนที่ลดขนาดเส้นผ่านศูนย์กลางทางออกแก๊ส 10% ซึ่งมีไซโคลนเพียงรูปแบบเดียวที่ให้ผลของประสิทธิภาพในการแยกสูงกว่าไซโคลนสแตมาน คือ ไซโคลนที่ลดขนาดเส้นผ่านศูนย์กลางทางออกแก๊ส 10% โดยให้ประสิทธิภาพสูงกว่าประมาณ 1.4%
การผลิตมอนอกลีเซอไรด์แบบไม่ใช้ตัวเร่งปฏิกิริยาจากกลีเซอรอลและน้ำมันปาล์ม, ฐิติวรดา ยิ่งยง
การผลิตมอนอกลีเซอไรด์แบบไม่ใช้ตัวเร่งปฏิกิริยาจากกลีเซอรอลและน้ำมันปาล์ม, ฐิติวรดา ยิ่งยง
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้ศึกษาการผลิตมอนอกลีเซอไรด์จากน้ำมันปาล์มและกลีเซอรอลโดยไม่ใช้ตัวเร่งปฏิกิริยาใช้การออกแบบทดลองแบบ Central composite design จำนวน 48 การทดลองโดยใช้ร้อยละมอนอกลีเซอไรด์เป็นผลตอบสนองหลัก ตัวแปรที่ศึกษา ได้แก่ อุณหภูมิ (220, 240 และ 260 องศาเซลเซียส) ระยะเวลาทำปฏิกิริยา (30, 90 และ 150 นาที) และอัตราส่วนโดยโมลของไอโซโพรพานอลต่อกลีเซอรอลต่อน้ำมันปาล์ม (0, 15 และ 30) โดยศึกษาอัตราส่วนโดยโมลของกลีเซอรอลต่อน้ำมันปาล์มคงที่ เท่ากับ 5 ต่อ 1 และปริมาตรของสารใส่ในเครื่องปฏิกรณ์เท่ากับร้อยละ 60 จากการทดลองพบว่า ตัวแปรที่มีผลต่อร้อยละมอนอกลีเซอไรด์มากที่สุด ได้แก่ อุณหภูมิและเวลาการเกิดปฏิกิริยา นอกจากนี้พบว่า ร้อยละไดกลีเซอไรด์และร้อยละกรดไขมันไม่มีความสัมพันธ์กับภาวะในการทำปฏิกิริยา ที่ระดับความเชื่อมั่นร้อยละ 99 ไอโซโพรพานอลไม่มีผลอย่างมีนัยสำคัญต่อร้อยละมอนอกลีเซอไรด์ นอกจากนี้มีการศึกษาเปรียบเทียบการผลิตมอนอกลีเซอไรด์โดยใช้กลีเซอรอลบริสุทธิ์และกลีเซอรอลดิบเป็นสารตั้งต้น ร้อยละมอนอกลีเซอไรด์สูงสุดพบที่อุณหภูมิ 260 องศาเซลเซียส เวลาการเกิดปฏิกิริยา 150 นาที และอัตราส่วนโดยโมลของกลีเซอรอลต่อน้ำมันปาล์มเท่ากับ 5:1 ร้อยละมอนอกลีเซอไรด์ที่ผลิตได้จากกลีเซอรอลบริสุทธิ์และกลีเซอรอลดิบ 37.48 และ 46.58 ตามลำดับ เนื่องจากในกลีเซอรอลดิบมีการปนเปื้อนของน้ำร้อยละ 10 ซึ่งสามารถทำปฏิกิริยากับไตรกลีเซอไรด์ได้เร็วกว่าการสลายตัวทางความร้อนเพียงอย่างเดียวส่งผลให้การผลิตมอนอกลีเซอไรด์ด้วยกลีเซอรอลดิบได้ผลดีกว่ากลีเซอรอลบริสุทธิ์
การผลิตเชื้อเพลิงชีวภาพแบบต่อเนื่องจากน้ำมันปาล์มในไฮเดรตเอทานอลภาวะเหนือวิกฤต, วราลี จิยะพานิชกุล
การผลิตเชื้อเพลิงชีวภาพแบบต่อเนื่องจากน้ำมันปาล์มในไฮเดรตเอทานอลภาวะเหนือวิกฤต, วราลี จิยะพานิชกุล
Chulalongkorn University Theses and Dissertations (Chula ETD)
การผลิตเชื้อเพลิงจากน้ำมันปาล์มในเอทานอลภาวะเหนือวิกฤตเป็นการผลิตเชื้อเพลิงที่ได้มาจากแหล่งทรัพยากรที่นำกลับมาใช้ใหม่ได้ (Renewable resource) อย่างแท้จริง เนื่องจากเอทานอลสามารถผลิตได้จากชีวมวลผ่านกระบวนการหมัก อย่างไรก็ตามการใช้เอทานอลเกรดเชื้อเพลิง (99.5% w/w) มีราคาแพงและใช้พลังงานสูงในการเพิ่มความบริสุทธิ์ ดังนั้นเพื่อเป็นการลดต้นทุนและพลังงานในการผลิต ในงานวิจัยนี้จึงได้ทำการศึกษาการผลิตเชื้อเพลิงชีวภาพจากน้ำมันปาล์มในไฮเดรตเอทานอลภาวะเหนือวิกฤตในเครื่องปฏิกรณ์แบบต่อเนื่อง โดยทำการศึกษาผลของอัตราส่วนโดยโมลของเอทานอลต่อน้ำมันปาล์มช่วง 9:1–21:1 ร้อยละโดยน้ำหนักของน้ำในเอทานอลช่วง 4.40–20.0 และเวลาในการเกิดปฏิกิริยา ช่วง 2.0–28.0 นาที ที่มีผลต่อร้อยละมอนอกลีเซอไรด์และร้อยละเอทิลเอสเทอร์ จากการศึกษาโดยวิธีการพื้นผิวตอบสนอง (Response surface methodology) ที่อุณหภูมิคงที่ 400 องศาเซลเซียส ความดัน 15 เมกะพาสคัล พบว่าปัจจัยหลักที่มีผลอย่างมีนัยสำคัญต่อร้อยละมอนอกลีเซอไรด์มากที่สุด คือ อัตราส่วนโดยโมลของเอทานอลต่อน้ำมันปาล์มและร้อยละของน้ำในเอทานอล ส่วนปัจจัยหลักที่มีผลอย่างมีนัยสำคัญต่อร้อยละเอทิลเอสเทอร์มากที่สุดคือ อัตราส่วนโดยโมลของเอทานอลต่อน้ำมันปาล์มและเวลาในการเกิดปฏิกิริยา โดยภาวะที่เหมาะสมสำหรับการผลิตเชื้อเพลิงชีวภาพที่ ร้อยละเอสเทอร์สูงสุดและร้อยละมอนอกลีเซอไรด์ต่ำกว่า 0.80 คือที่อัตราส่วนโดยโมลเอทานอลต่อน้ำมันปาล์ม 21:1 ร้อยละของน้ำในเอทานอล 12.77 และเวลาในการเกิดปฏิกิริยา 9.10 นาที ได้ร้อยละมอนอกลีเซอไรด์เท่ากับ 0.80 และร้อยละผลได้เอสเทอร์สูงสุดเท่ากับ 53.32 การวิเคราะห์สมบัติของเชื้อเพลิงชีวภาพที่ได้จากภาวะที่เหมาะสมยังไม่เป็นไปตามมาตรฐานของไบโอดีเซล โดยพบว่ามีค่าความหนืดและค่าความเป็นกรดสูง เนื่องจากเกิดปฏิกิริยาไม่สมบูรณ์ส่งผลให้มีปริมาณกรดไขมันอิสระเหลืออยู่ในผลิตภัณฑ์เชื้อเพลิงชีวภาพประมาณร้อยละ 22.65
การขจัดกำมะถันแบบดูดซับจากน้ำมันดีเซลบนวายซีโอไลต์แลกเปลี่ยนไอออน, อานันท์ ศิลาจันทร์
การขจัดกำมะถันแบบดูดซับจากน้ำมันดีเซลบนวายซีโอไลต์แลกเปลี่ยนไอออน, อานันท์ ศิลาจันทร์
Chulalongkorn University Theses and Dissertations (Chula ETD)
ปัจจุบัน 95 เปอร์เซ็นต์ ของการขนส่งขึ้นกับเชื้อเพลิงซอสซิลโดยเฉพาะอย่างยิ่งน้ำมันดีเซล น้ำมันดีเซลไม่ได้มีส่วนประกอบแค่พาราฟินและโอเลฟินเพียงเท่านั้น ยังมีสารประกอบกำมะถันซึ่งเป็นสาเหตุหนึ่งที่ก่อให้เกิดภาวะฝนกรด การกัดกร่อนอุปกรณ์ที่เกี่ยวข้อง ความเป็นพิษต่อตัวเร่งปฏิกิริยาและก่อให้เกิดปัญหาต่อระบบทางเดินหายใจ เพื่อแก้ไขปัญหาดังกล่าวกระบวนการขจัดกำมะถันโดยการดูดซับถูกนำมาใช้กับน้ำมันดีเซลเพื่อลดปริมาณของกำมะถันในน้ำมันดีเซล อย่างไรก็ตามน้ำมันดีเซลยังคงมีส่วนประกอบอื่นๆ เช่น สารประกอบแอโรแมติกและไนโตรเจนอยู่ด้วย ดังนั้น งานวิจัยนี้เป็นการศึกษาผลของสารประกอบแอโรแมติกและไนโตรเจนต่อการขจัดกำมะถันในรูปของไดเบนโซไทโอฟีนและ 4,6-ไดเมทิลไดเบนโซไทโอฟีน ในน้ำมันจำลองที่มีนอร์มัลออกเทนเป็นตัวทำละลายโดยการดูดซับโดยใช้คอลัมน์แบบเบดนิ่งที่บรรจุตัวดูดซับ ตัวดูดซับที่ใช้ในการศึกษามี 6 ชนิด ได้แก่ ซีโอไลต์ Na-Y, Ni-Y, La-Y, Ce-Y, Ni-La-Y และ Ni-Ce-Y ผลการทดลองแสดงในรูปของความจุเบรคทรูและความจุทั้งหมดในการดูดซับสารประกอบกำมะถันซึ่งสามารถคำนวณได้จากเส้นโค้งเบรคทรู พบว่าความจุในการดูดซับไดเบนโซไทโอฟีนและ 4,6-ไดเมทิลไดเบนโซไทโอฟีนในน้ำมันจำลองที่มีสารประกอบแอโรแมติกและไนโตรเจนโดยใช้ตัวดูดซับชนิดต่างๆ ลดลงตามลำดับดังนี้ Na-Y ~ Ni-Ce-Y ~ Ni-Y > La-Y > Ce-Y > Ni-La-Y สารประกอบแอโรแมติกและไนโตรเจนส่งผลให้ความจุการดูดซับสารประกอบกำมะถันลดลงโดยสารประกอบไนโตรเจนส่งผลต่อการลดลงของการดูดซับสารประกอบกำมะถันมากกว่าสารประกอบแอโรแมติก นอกจากนี้ศึกษาการคืนสภาพตัวดูดซับซีโอไลต์ Na-Y ด้วยการสกัดด้วยตัวทำละลายโดยตัวแปรที่ศึกษา ได้แก่ ชนิดตัวทำละลาย อุณหภูมิและอัตราการไหลของตัวทำละลาย พบว่า การคายสารประกอบที่ดูดซับบ่งบอกประสิทธิภาพของการคืนสภาพจะขึ้นกับสภาพขั้วที่เหมือนกันของตัวทำละลายและสารที่ถูกดูดซับ ตัวทำละลายที่มีอุณหภูมิสูงมักจะช่วยให้สกัดสารถูกดูดซับได้ดีขึ้น และการใช้อัตราการไหลต่ำช่วยให้ตัวทำละลายมีเวลามากในการสกัดสารถูกดูดซับ
Effects Of Titanium Dioxide Structure And Cobalt Addition On The Catalytic Properties Of Ru/Tio2 In The Selective Hydrogenation Of Furfural To Furfuryl Alcohol, Natdanai Nanthasanti
Effects Of Titanium Dioxide Structure And Cobalt Addition On The Catalytic Properties Of Ru/Tio2 In The Selective Hydrogenation Of Furfural To Furfuryl Alcohol, Natdanai Nanthasanti
Chulalongkorn University Theses and Dissertations (Chula ETD)
Furfuryl alcohol, an important intermediate for the production of many fine chemicals, is typically produced by the selective hydrogenation of lignocellulosic biomass-derived furfural using supported metal catalysts. In this research, 1.5%wt Ru catalysts supported on nanocrystalline TiO2 were prepared by incipient wetness impregnation method. The effects of crystallographic of TiO2 and Co addition in the range of 0.2-0.8 wt% on the catalytic properties of Ru/TiO2 were investigated in the selective hydrogenation of furfural to furfural alcohol at 50?C, 20 bar of H2, and 2 h reaction time. It was found that Ru supported on anatase phase TiO2 exhibited the highest …
Co2 Methanation Over Nial2o4 Spinel - Based Catalysts, Chanya Thamma
Co2 Methanation Over Nial2o4 Spinel - Based Catalysts, Chanya Thamma
Chulalongkorn University Theses and Dissertations (Chula ETD)
In the present work, a series of NiO/NiAl2O4 catalysts were prepared by co-precipitation method with molar ratio of Ni/Al equal 1/2 at different precipitation temperatures (30 and 80oC) and calcination temperatures (500, 700, 900, and 1200oC). The catalyst properties were characterized by using N2 physisorption, X-ray diffraction, H2 TPR, SEM, and TEM. The NiO/NiAl2O4 precipitated at 80oC and calcined at 900oC showed the best activity in CO2 methanation at 350oC with conversion 92% and 100% methane selectivity without CO formation. The optimal of NiO and NiAl2O4 composition at 24.7% and 75.3%wt could provide a stabilizing effect preventing the metal …
Effects Of Titania Phase And Tungsten Loading Content In W/Tio2 Catalysts On Dehydration Of Ethanol To Diethyl Ether, Pongsatorn Kerdnoi
Effects Of Titania Phase And Tungsten Loading Content In W/Tio2 Catalysts On Dehydration Of Ethanol To Diethyl Ether, Pongsatorn Kerdnoi
Chulalongkorn University Theses and Dissertations (Chula ETD)
Nowadays, ethanol which is one of the most used renewable energies can be converted into the more valuable compounds. It was reported that titania-supported tungsten (W/TiO2) catalyst is able to convert ethanol into diethyl ether. However, titania support has different crystalline phases that can result in differences of physicochemical properties for the catalyst. Therefore, the present work reports on the catalytic behaviors of both different phases of titania and tungsten loading contents in catalytic ethanol dehydration to diethyl ether. To prepare the catalysts, the three different phases [anatase (A), rutile (R), and mixed phases (P25)] of titania supports were impregnated …
การปรับสภาพตัวเร่งปฏิกิริยา Wo3/Tio2 ด้วยกรดกำมะถันเพื่อใช้ในการกำจัดไนตริกออกไซด์และโทลูอีนพร้อมกัน, กฤตยณัฐ เหล่าเลิศรัตนา
การปรับสภาพตัวเร่งปฏิกิริยา Wo3/Tio2 ด้วยกรดกำมะถันเพื่อใช้ในการกำจัดไนตริกออกไซด์และโทลูอีนพร้อมกัน, กฤตยณัฐ เหล่าเลิศรัตนา
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้เป็นการศึกษาความเป็นไปได้ในการใช้ตัวเร่งปฏิกิริยาทังสเตนออกไซด์บนตัวรองรับไทเทเนีย (WO3/TiO2) ในการกำจัดไนตริกออกไซด์ร่วมกับโทลูอีนที่มีอยู่ร่วมกันในแก๊สปล่อยทิ้ง โดยได้ทำการปรับสภาพตัวรองรับไทเทเนียด้วยสารละลายกรดกำมะถันเข้มข้น 0, 0.2 และ 0.5 โมล/ลิตร ก่อนนำไปใช้เตรียมตัวเร่งปฏิกิริยาด้วยวิธีเคลือบฝังแบบเปียก ทำการวิเคราะห์คุณลักษณะของตัวเร่งปฏิกิริยา WO3/TiO2 ซึ่งประกอบด้วยเทคนิค Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES), Nitrogen Physisorption, X-ray Diffraction (XRD), NH3 Temperature Programmed Desorption (NH3-TPD) และ Pyridine Adsorption ทำการทดสอบประสิทธิภาพตัวเร่งปฏิกิริยาใน 3 ระบบ ได้แก่ การทดสอบตัวเร่งปฏิกิริยาในกระบวนการรีดิวซ์แบบเลือกเกิดด้วยตัวเร่งปฏิกิริยาที่เป็นปฏิกิริยาที่ใช้กำจัดไนตริกออกไซด์ การทดสอบตัวเร่งปฏิกิริยาด้วยปฏิกิริยาโทลูอีนออกซิเดชันที่เป็นปฏิกิริยาที่ใช้ในการกำจัดโทลูอีน และการทดสอบตัวเร่งปฏิกิริยาด้วยปฏิกิริยาโทลูอีนออกซิเดชันร่วมกับการทดสอบตัวเร่งปฏิกิริยาในกระบวนการรีดิวซ์แบบเลือกเกิดด้วยตัวเร่งปฏิกิริยาที่เป็นปฏิกิริยาที่ใช้ในการกำจัดโทลูอีนและไนตริกออกไซด์พร้อมกัน (ปฏิกิริยารวม) การทดสอบกระทำในช่วงอุณหภูมิ 120 - 450 °C สำหรับการกำจัดไนตริกออกไซด์ในกระบวนการรีดิวซ์แบบเลือกเกิดด้วยตัวเร่งปฏิกิริยาพบว่า ตัวเร่งปฏิกิริยา WO3/TiO2 ที่ผ่านการปรับสภาพด้วยกรดกำมะถันเข้มข้น 0.2 โมล/ลิตร มีประสิทธิภาพสูงสุดในการกำจัดไนตริกออกไซด์ ส่วนปฏิกิริยาโทลูอีนออกซิเดชันพบว่า ตัวเร่งปฏิกิริยา WO3/TiO2 ที่ผ่านและไม่ผ่านการปรับสภาพด้วยกรดกำมะถัน จะมีประสิทธิภาพในการกำจัดจัดโทลูอีนได้ใกล้เคียงกัน แต่ตัวเร่งปฏิกิริยา WO3/TiO2 ที่ผ่านการปรับสภาพด้วยกรดกำมะถันเข้มข้น 0.5 โมล/ลิตร สามารถเพิ่มปริมาณการเกิดคาร์บอนไดออกไซด์ได้มากขึ้น สำหรับปฏิกิริยารวม พบว่าที่อุณหภูมิสูง ตัวเร่งปฏิกิริยาจะมีความสามารถในการกำจัดไนตริกออกไซด์ได้ดีขึ้นเมื่อมีโทลูอีนอยู่ในระบบ เมื่อเทียบกับปฏิกิริยาในกระบวนการรีดิวซ์แบบเลือกเกิดด้วยตัวเร่งปฏิกิริยาที่ปราศจากโทลูอีน
การเร่งปฏิกิริยาดีไฮเดรชันของเอทานอลที่มีความเข้มข้นที่ต่างกันบนตัวเร่งปฏิกิริยา Zr/Sba-15, Zr-La/Sba-15, คนธรัตน์ แย้มศิริ
การเร่งปฏิกิริยาดีไฮเดรชันของเอทานอลที่มีความเข้มข้นที่ต่างกันบนตัวเร่งปฏิกิริยา Zr/Sba-15, Zr-La/Sba-15, คนธรัตน์ แย้มศิริ
Chulalongkorn University Theses and Dissertations (Chula ETD)
ในปัจจุบันเอทิลีนเป็นที่ต้องการเพิ่มสูงขึ้นอย่างต่อเนื่อง อุตสาหกรรมการผลิตเอทิลีนในปัจจุบันนิยมใช้กระบวนการแตกสลายทางความร้อนโดยใช้ไอน้ำ (steam thermal cracking) วัตถุดิบตั้งต้นที่นิยมใช้คือแนฟทาซึ่งเป็นสารตั้งต้นที่ใช้แล้วหมดไป กระบวนการนี้ปลดปล่อยมลพิษออกสู่สิ่งแวดล้อมอีกทั้งยังใช้อุณหภูมิสูงในการดำเนินงาน ในทางกลับกัน ปฏิกิริยาดีไฮเดรชันกำลังเป็นที่สนใจในการศึกษาเพิ่มมากขึ้น เนื่องจากเป็นการผลิตเอทิลีนจากเอทานอลด้วยวิธีการขจัดน้ำออกใช้สภาวะในการดำเนินงานที่อุณหภูมิต่ำกว่า และสารตั้งต้นที่ใช้คือเอทานอลที่ผลิตได้จากของเหลือทิ้งทางการเกษตร วิทยานิพนธ์เล่มนี้จึงศึกษาตัวเร่งปฏิกิริยาที่ใช้ในกระบวนการเอทานอลดีไฮเดรชันเพื่อเปลี่ยนเป็นเอทิลีน โดยใช้ตัวเร่งปฏิกิริยาชนิดเมโซพอรัส SBA-15 ทั้งที่ปรับปรุงด้วยโลหะทรานซิชันเซอร์โคเนียม (Zr), แลนทานัม (La) และโลหะผสมระหว่างเซอร์โคเนียมและแลนทานัม (Zr-La) สังเคราะห์ด้วยวิธีไฮโดรเทอร์มอล ตัวเร่งปฏิกิริยาถูกวิเคราะห์คุณลักษณะด้วยเทคนิค XRD, N2 physisorption, FTIR, Raman, UV-Visible spectroscopy, SEM/EDX และ NH3-TPD จากนั้น ในส่วนแรก นำตัวเร่งปฏิกิริยาที่สังเคราะห์ได้มาทดสอบในปฏิกิริยาเอทานอลดีไฮเดรชันในเครื่องปฏิกรณ์แบบเบดคงที่ สภาวะความดันบรรยากาศ ศึกษาที่ช่วงอุณหภูมิ 200-400 องศาเซลเซียส พบว่าเมื่ออุณหภูมิสูงขึ้นจะสามารถเพิ่มการเปลี่ยนแปลงสารตั้งต้นและค่าการเลือกเกิดผลผลิตเอทิลีนได้ดีมากขึ้นในทุกตัวเร่งปฏิกิริยา โดยตัวเร่งปฏิกิริยาที่ปรับปรุงด้วยโลหะผสม Zr-La/SBA-15 แสดงการเปลี่ยนแปลงสารตั้งต้นและการเกิดผลผลิตเอทิลีนสูงที่สุดร้อยละ 23.2 ที่อุณหภูมิ 400 องศาเซสเซียส จึงนำ Zr-La/SBA-15 นำไปทดลอง ในส่วนที่สอง คือการใช้ความเข้มข้นของเอทานอลที่แตกแต่งกัน (ร้อยละ 50, 99.98 โดยปริมาตร) ในการทำปฏิกิริยาดีไฮเดรชัน พบว่าสารตั้งต้นเอทานอลทั้งสองความเข้มข้นให้ค่าการเปลี่ยนแปลงสารตั้งต้นและค่าการเลือกเกิดผลผลิตเอทิลลีนเพิ่มสูงขึ้นเมื่ออุณหภูมิสูงขึ้น ซึ่งเป็นไปในทิศทางเดียวกัน แต่ที่ความเข้มข้นเอทานอลร้อยละ 50 โดยปริมาตร ให้ค่าการเปลี่ยนแปลงสารตั้งต้นและค่าการเกิดผลผลิตเอทิลีน ต่ำกว่าเมื่อเทียบกับการใช้เอทานอลความเข้มข้นร้อยละ 99.98 โดยปริมาตร ในการทำปฏิกิริยา
การพัฒนาหมวกกันกระสุนน้ำหนักเบาจากพอลิเมอร์นาโนคอมพอสิทจากเมทริกซ์ประเภทเบนซอกซาซีนอัลลอยด์เสริมแรงด้วยเส้นใยสมรรถนะสูง, จัสมิน ดวงคำสวัสดิ์
การพัฒนาหมวกกันกระสุนน้ำหนักเบาจากพอลิเมอร์นาโนคอมพอสิทจากเมทริกซ์ประเภทเบนซอกซาซีนอัลลอยด์เสริมแรงด้วยเส้นใยสมรรถนะสูง, จัสมิน ดวงคำสวัสดิ์
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้มีจุดมุ่งหมายเพื่อพัฒนาวัสดุจากพอลิเมอร์นาโนคอมพอสิทจากเมทริกซ์ประเภทพอลิเบนซอกซาซีนอัลลอยด์ร่วมกับพอลิยูรีเทน ในอัตราส่วน 80/20 เปอร์เซ็นต์โดยน้ำหนัก ตามลำดับ เสริมแรงด้วยเส้นใยอะรามิด สำหรับผลิตเป็นหมวกกันกระสุน โดยศึกษาปริมาณการเติมอนุภาคคาร์บอนนาโนทิวบ์ชนิดผนังหลายชั้น (Multi-walled carbon nanotubes, MWCNT) ที่ 0.0, 0.25, 0.50, 1.0 และ 2.0 เปอร์เซ็นต์โดยน้ำหนัก ต่อสมบัติทางกลของวัสดุ พบว่าการเติมอนุภาค MWCNT ส่งผลต่อสมบัติทางกลของวัสดุ โดยชิ้นงานที่ไม่เติมอนุภาค MWCNT มีค่าความแข็งแรงภายใต้แรงดึง และพลังงาน ณ จุดขาดเท่ากับ 428±40.6 MPa และ 20.8±2.8 J ตามลำดับ เมื่อเติมอนุภาค MWCNT ที่ 0.25 เปอร์เซ็นต์โดยน้ำหนัก พบว่าค่าความแข็งแรงภายใต้แรงดึง และพลังงาน ณ จุดขาด สูงขึ้น เท่ากับ 507±31.4 MPa และ 28.1±0.8 J ตามลำดับ เมื่อนำวัสดุพอลิเมอร์คอมพอสิทที่ปริมาณการเติม MWCNT 0.25 เปอร์เซ็นต์โดยน้ำหนัก มาขึ้นรูปเป็นแผ่นกันกระสุนที่จำนวนชั้นเส้นใยอะรามิดที่ 10, 15 และ 20 ชั้น ทดสอบด้วย กระสุนขนาด 9 มม. ตามมาตรฐาน NIJ-0106.01 พบว่าสามารถป้องกันการเจาะทะลุได้ที่ทุกจำนวนชั้นเส้นใยอะรามิด โดยที่ 20 ชั้นเส้นใยอะรามิดมีประสิทธิภาพในการป้องกันแรงปะทะทางขีปนะดีที่สุด จึงนำลักษณะการเสียรูปของแผ่นเกราะดังกล่าวมาจำลองแรงปะทะทางขีปนะด้วยโปรแกรม ANSYS-AUTODYN เพื่อหาสมบัติของวัสดุ (Material properties) ทั้งสามแนวแกนหลัก พบว่าการจำลองด้วยโปรแกรมคอมพิวเตอร์และจากวิธีการทดลองมีความคลาดเคลื่อนเพียง 10.23 เปอร์เซ็นต์ เมื่อนำสมบัติวัสดุที่ได้มาจำลองเป็นหมวกกันกระสุน พบว่า หมวกกันกระสุนสามารถต้านทานการเจาะทะลุด้วยกระสุน 9 มม. ที่ความเร็ว 358 เมตรต่อวินาที (NIJ-0106.01 ระดับที่ 2) ได้ และมีรอยยุบตัวที่เกิดขึ้นไม่เกินค่าที่กำหนดไว้ดังมาตรฐาน NIJ-0106.01 ที่ทุกตำแหน่งทดสอบ พร้อมทั้งหมวกกันกระสุนมีขีดจำกัดทางขีปนะเท่ากับ 632 เมตรต่อวินาที …
การกำจัดไนโตรเจนมอนอกไซด์พร้อมโทลูอีนบนตัวเร่งปฎิกิริยา Wo3/Tio2 ที่ได้รับการเสริมด้วย Mgo, จิรายุ ชัยวงศ์โรจน์
การกำจัดไนโตรเจนมอนอกไซด์พร้อมโทลูอีนบนตัวเร่งปฎิกิริยา Wo3/Tio2 ที่ได้รับการเสริมด้วย Mgo, จิรายุ ชัยวงศ์โรจน์
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้ทำการเคลือบฝัง MgO บนตัวเร่งปฏิกิริยา WO3/TiO2 และศึกษาผลของการเคลือบฝัง MgO ปริมาณ 0.15, 0.45 และ 1.35 wt% ต่อคุณสมบัติการทำปฏิกิริยาของตัวเร่งปฏิกิริยา WO3/TiO2 ทำการวิเคราะห์คุณลักษณะตัวเร่งปฏิกิริยาด้วยเทคนิค ICP, XRD, Nitrogen physisorption และ Pyridine adsorption และทำการทดสอบความสามารถในการทำปฏิกิริยาในช่วงอุณหภูมิ 120–450°C ระบบการทำปฏิกิริยาที่ใช้ศึกษาถูกแบ่งเป็น 3 ส่วน คือ ระบบปฏิกิริยาการออกซิไดซ์โทลูอีน ระบบปฏิกิริยารีดักชันแบบเลือกเกิดของ NO ด้วย NH3 และระบบปฏิกิริยารีดักชันแบบเลือกเกิดร่วมกับการออกซิไดซ์โทลูอีน ผลการทดสอบพบว่าการเคลือบฝัง MgO ลงบนตัวเร่งปฏิกิริยา WO3/TiO2 ทำให้ความสามารถในการกำจัด NO และการออกซิไดซ์โทลูอีนลดลง แต่อย่างไรก็ตามกลับพบว่าค่าการเลือกเกิดไปเป็นคาร์บอนไดออกไซด์มีค่าที่สูงขึ้น โดยตัวเร่งปฏิกิริยา WO3/TiO2 ที่ผ่านการเคลือบฝัง MgO ปริมาณ 0.45 wt% ให้ค่าการเลือกเกิดไปเป็นคาร์บอนไดออกไซด์สูงสุด สำหรับระบบการกำจัด NO ร่วมกับโทลูอีนพบว่าความสามารถในการกำจัด NO ลดลงเล็กน้อยเมื่ออุณหภูมิสูงขึ้นเมื่อเทียบกับระบบรีดักชันแบบเจาะจง
การศึกษาการสกัดสารประกอบฟีนอลิกจากไข่น้ำและการประยุกต์ใช้สำหรับเครื่องสำอางประเภทเอนแคปซูเลชันอิมัลชัน, จุฬาวรรณ์ ดอกไม้งาม
การศึกษาการสกัดสารประกอบฟีนอลิกจากไข่น้ำและการประยุกต์ใช้สำหรับเครื่องสำอางประเภทเอนแคปซูเลชันอิมัลชัน, จุฬาวรรณ์ ดอกไม้งาม
Chulalongkorn University Theses and Dissertations (Chula ETD)
จุดมุ่งหมายหลักของงานวิจัยนี้เป็นการศึกษาหาสภาวะที่หมาะสมของการสกัดและการพัฒนาการขึ้นรูปไมโครอิมัลชันของไข่น้ำ อิทธิพลของพารามิเตอร์การสกัดต่อค่าผลได้และค่าต้านอนุมูลอิสระของไข่น้ำได้ถูกประเมิน สภาวะที่เหมาะสมของการสกัด คือ อุณหภูมิ 50 องศาเซลเซียส เวลา 120 นาที เมื่อใช้สารละลายเอทานอลความเข้มข้น 70 เปอร์เซ็นต์โดยปริมาตร และ อัตราส่วนตัวทำละลายต่อของแข็ง ที่ 15 ต่อ 1 ค่าสูงสุดที่ได้ คือ ค่าผลได้สารประกอบฟีนอลิก (40.23 มิลลิกรัมสมมูลกรดแกลลิกต่อกรัมน้ำหนัก) ค่าผลได้สารฟลาโวนอยด์ (258.09 มิลลิกรัมสมมูลสารเคชินต่อกรัมน้ำหนัก) และค่าความสามารถต้านอนุมูลอิสระ (34.98 มิลลิกรัมสมมูลสารโทล็อกซ์เมื่อวัดด้วยวิธี DPPH) จากผลที่ได้นั้นค่าสัมประสิทธิ์การแพร่ของการสกัดมีค่าในช่วง 6.43 x 10-7 ถึง 1.32 x 10-6 ตารางเมตรต่อวินาที สารสกัดได้ถูกนำมากักเก็บในรูปไมโครอิมัลชันชนิดน้ำมันในน้ำที่ผลิตโดยการใช้เครื่องปั่นความเร็วสูง ผลของปริมาณน้ำมัน ชนิดสารลดแรงตึงผิว ความเข้มข้นของสารลดแรงตึงผิว และเวลาที่ทำให้เกิดอิมัลชันต่อสมบัติทางกายภาพเคมีของไมโครอิมัลชันได้ถูกตรวจสอบ สภาวะที่เหมาะสมในการเตรียมไมโครอิมัลชัน คือ ใช้กรดสเตียริกความเข้มข้น 10 เปอร์เซ็นต์โดยน้ำหนัก สารลดแรงตึงผิวร่วมชนิดผสมระหว่าง TWEEN ® 40 และ Cremophor ® RH40 ในปริมาณ 10 เปอร์เซ็นต์โดยน้ำหนัก และเวลาในการทำให้เกิดอิมัลชัน 15 นาที ไมโครอิมัลชันของไข่น้ำมีขนาดอนุภาค 0.658 ไมโครเมตร ค่าศักย์ซีต้า -47.00 มิลลิโวลต์ และค่าการกระจายตัวของขนาดอนุภาคที่ 0.264 อนุภาคทรงกลมมีค่ากักเก็บมากที่สุดที่ 91.45 เปอร์เซ็นต์
การเร่งปฏิกิริยาดีไฮเดรชันของเอทานอลไปเป็นไดเอทิลอีเทอร์บนตัวเร่งปฏิกิริยาไฮดรอกซีอะพาไทท์และอะลูมินาที่ปรับปรุงด้วยแพลลาเดียม, ณัฏฐ์ดนัย ลิขิตพิริยะ
การเร่งปฏิกิริยาดีไฮเดรชันของเอทานอลไปเป็นไดเอทิลอีเทอร์บนตัวเร่งปฏิกิริยาไฮดรอกซีอะพาไทท์และอะลูมินาที่ปรับปรุงด้วยแพลลาเดียม, ณัฏฐ์ดนัย ลิขิตพิริยะ
Chulalongkorn University Theses and Dissertations (Chula ETD)
ในปัจจุบัน มีอัตราการเจริญเติบโตของประชากรที่สูงขึ้น จึงเป็นผลให้มีการใช้พลังงานเพิ่มมากขึ้นในทุกวัน ซึ่งส่งผลให้ทรัพยากรที่ใช้ผลิตพลังงานดังกล่าวมีแนวโน้มที่ลดลง ดังนั้นเราต้องมีการคำนึงถึงพลังงานทางเลือกใหม่ที่สามารถลดการปล่อยมลภาวะได้ พลังงานชีวมวลเป็นพลังงานทางเลือกที่สามารถทำให้ลดใช้พลังงานจากแหล่งปิโตรเคมีได้ ในปัจจุบันได้มีการนำพลังงานชีวมวลมาใช้เป็นสารเติมแต่งให้กับน้ำมันเชื้อเพลิงจากปิโตรเคมี ไดเอทิลอีเทอร์ เป็นสารที่ให้พลังงานรูปแบบใหม่ เหมาะกับเป็นสารเติมแต่ง ในงานวิจัยเล่มนี้ได้ทำการศึกษาสภาวะการผลิตไดเอทิลอีเทอร์ จากปฏิกิริยาขจัดน้ำของเอทานอล โดยผ่านตัวเร่งปฏิกิริยาที่สังเคราะห์มาจากไฮดรอกซีอะพาไทท์และอะลูมินา โดยทำการศึกษาที่ส่วนผสมในร้อยละที่แตกต่างกัน เพื่อหาสัดส่วนมวลที่ดีที่สุด และนำไปผสมโลหะแพลเลเดียม เพื่อปรับปรุงโครงสร้างของตัวเร่งปฏิกิริยาให้ดีขึ้น การวัดคุณสมบัติของตัวเร่งปฏิกิริยา จะใช้เครื่องมือดังต่อไปนี้ การวิเคราะห์จากกล้องจุลทรรศน์อิเล็กตรอนแบบส่องกราด (SEM), การวิเคราะห์องค์ประกอบธาตุของวัสดุด้วยเทคนิคจุลวิเคราะห์ (EDX), เครื่องวิเคราะห์การเลี้ยวเบนรังสีเอกซ์ (XRD), การคำนวณพื้นที่ผิวโดยวิธีดูดซับทางกายภาพด้วยไนโตรเจน (N2 physisorption) และเทคนิคโปรแกรมอุณหภูมิเพื่อทดสอบการคายซับโดยใช้ก๊าซแอมโมเนีย (NH3-TPD) ปฏิกิริยาถูกทดสอบในสภาวะไอภายใต้ความดันบรรยากาศ ที่อุณหภูมิตั้งแต่ 200 ถึง 400 องศาเซลเซียส ซึ่งจากการทดลองพบว่า อัตราส่วนโดยน้ำหนักที่เหมาะสมสำหรับตัวเร่งปฏิกิริยาจากไฮดรอกซีอะพาไทท์และอะลูมินาเป็น 2 ต่อ 8 โดยน้ำหนัก โดยตัวเร่งปฏิกิริยาดังกล่าว มีค่าการเลือกเกิดของไดเอทิลอีเทอร์ได้สูงสุดร้อยละ 85.92 ที่อุณหภูมิ 350 องศาเซลเซียส แต่เนื่องด้วยมีค่ายังผลที่ต่ำเท่ากับร้อยละ 10.8 จึงได้นำตัวเร่งปฏิกิริยาไปปรับปรุงโดยอาศัยแพลลาเดียมเป็นสารเติมแต่ง ซึ่งผลสามารถสรุปได้ว่า ค่ายังผลของไดเอทิลอีเทอร์สูงขึ้นเท่ากับ 22.5 ที่อุณหภูมิ 350 องศาเซลเซียส