Open Access. Powered by Scholars. Published by Universities.®

Chemical Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 721 - 750 of 776

Full-Text Articles in Chemical Engineering

A Preliminary Study Of The Synthesis Of Tin-Based Amorphous Material And Its Behavior On Lithium Intercalation, Li Liu, Han-Xi Yang, Ju-Tang Sun, Xing-Ping Ai Nov 1998

A Preliminary Study Of The Synthesis Of Tin-Based Amorphous Material And Its Behavior On Lithium Intercalation, Li Liu, Han-Xi Yang, Ju-Tang Sun, Xing-Ping Ai

Journal of Electrochemistry

An amorphous lithium inserting anode material based on Tin oxide glass was synthesized by salification in solution and its properties on lithium intercalation was investigated by X ray diffraction (XRD), microelectrode voltammetry and charge discharge measurements. The results have shown that this kind of material has considerable electrochemical reversibility toward lithium intercalation deintercalation. The available discharge capacity of the material reaches 430 mAh/g with charge-discharge efficiency over 90%, showing a great potential for practical use.


Direct Electro-Oxidation Synthesis Of D-Arabinose On Spectroscopic Graphite Electrode, Hei Wei, Huang Ying Nov 1998

Direct Electro-Oxidation Synthesis Of D-Arabinose On Spectroscopic Graphite Electrode, Hei Wei, Huang Ying

Journal of Electrochemistry

D Arabinose synthesized by direct electro-oxidative decarboxylation of D gluconate on graphite electrode from aqueous solutions. The effects of D gluconate concentration, electrolysis potential, temperature and electrolyte composition on the current efficiency and product yield of electrosynthsis are discussed. The laboratory scale electrosynthesis was achieved with flow through cell. The optimum technology conditions for electrosynthesis were obtained with orthogonal design method. Both galvanostatic and potentionstatic conditions have been exploited, the later was found to be more effective.


Study On Electrosynthesis Of Butyl Butyrate At Conducting Oxide Anode Support On Titanium, Jun-Xiang He, Jin-Cheng Zhou, Kang-Ning Chen Nov 1998

Study On Electrosynthesis Of Butyl Butyrate At Conducting Oxide Anode Support On Titanium, Jun-Xiang He, Jin-Cheng Zhou, Kang-Ning Chen

Journal of Electrochemistry

Synthesis of butyl butyrate by direct electroxidation of n butyl alcohol and the electrochemical behaviors of several selected conducting oxide electrodes (Pb/PbO2, Ti/PbO2, i/SnO2+Sb2O3/PbO2 and Ti/SnO2+Sb2O3+PdOx/PbO2) have been investigated. The results demonstrated that the intermediate layers of SnO2, Sb2O3 and PdOx could significantly decrease the interfacial resistance of the electrodes, and that the Ti/SnO2+Sb2O3+PdOx/PbO2 electrode possessed better electrocatelytic performance than others.


Direct Electrochemical Reaction Of Cytochrome C At The Poly (Ethylene Oxide) Film Modified Gold Electrodes, Xiao-Gang Qu, Gong-Quan Sun, Hui Yang, Tian-Hong Lu Aug 1998

Direct Electrochemical Reaction Of Cytochrome C At The Poly (Ethylene Oxide) Film Modified Gold Electrodes, Xiao-Gang Qu, Gong-Quan Sun, Hui Yang, Tian-Hong Lu

Journal of Electrochemistry

In this paper, the direct electrochemical reaction of cytochrome c was sudied at the poly (ethylene oxide) film modified gold electrodes. It was found the PEO is a good promoter for the electrochemical reaction of cytochrome c, and the reversibility of reaction of cytochrome c was found to depend on the molecular weight of PEO and the morphology of the PEO films.


Studies On The Electrode Kinetics Of Electrooxidation Of Mn2+, Wan-Li Hu, Tong Su, Wei Guo, Ding Zhou Aug 1998

Studies On The Electrode Kinetics Of Electrooxidation Of Mn2+, Wan-Li Hu, Tong Su, Wei Guo, Ding Zhou

Journal of Electrochemistry

The mechanism of electrooxidation of MnSO4 on Pb Sb As alloy anode was investigated by using rotating disc electrode technique. The results shown that the conditional standard potential of Mn(Ⅲ)/Mn(Ⅱ)in 40% H2SO4 is 0.886 4 V.The rate controlling step of electrode process is mixed controlled by charge transfer and diffusion.


Study Of Proton Exchange Membrane Fuel Cells(Pemfc), Shan-Hai Ge, Bao-Lian Yi, Hong-Fen Xu, Ming Han, Zhi-Gang Shao Aug 1998

Study Of Proton Exchange Membrane Fuel Cells(Pemfc), Shan-Hai Ge, Bao-Lian Yi, Hong-Fen Xu, Ming Han, Zhi-Gang Shao

Journal of Electrochemistry

The electrode kinetic parameters for proton exchange membrane fuel cells(PEMFC) were investigated by measuring the relations of cell potential and current density. An experimental stack of PEMFC which can be operated at E cell =0.7V, I =0.55A/cm2 steadily is presented, and the effects of electrode structure and operation conditions such as temperature, pressure, humidification, flow rate on the performance of PEMFC are discussed.


Electrooxidation Of Benzene To Benzoquinone In A Packed Bed Reactor, Xin-Sheng Zhang, Ping Ding, Ying-Chun Dai, Wei-Kang Yuan Aug 1998

Electrooxidation Of Benzene To Benzoquinone In A Packed Bed Reactor, Xin-Sheng Zhang, Ping Ding, Ying-Chun Dai, Wei-Kang Yuan

Journal of Electrochemistry

A packed electrode reactor was used to oxidize to benzoquinone. Anode bed of the reactor has a size of 10~30 mm×450 mm×50 mm(thickness×length×width),and was packed porous lead alloy. A dispersion of benzene in 1 mol/L aqueous sulfuric acid was passed through the reactor. Current efficiency for benzoquinone generation is 62.9% at optimal operating condition: velocity of electrolyte flow, 0.19 ms -1 ;current, 10 A; thickness of anode bed, 10 mm, and percentage of benzene, 24%.


Studies Of Surface Alloy As High Efficient Electrocatalyst For Glyoxylic Acid Synthesis, Sheng-Pei Chen, Sheng-Qing Xia, Shi-Gang Sun May 1998

Studies Of Surface Alloy As High Efficient Electrocatalyst For Glyoxylic Acid Synthesis, Sheng-Pei Chen, Sheng-Qing Xia, Shi-Gang Sun

Journal of Electrochemistry

/


In-Situ Raman Spectroscopic Study Of The Oxidation And Reduction Of Ag Electrode In Na2So4, Yan-Xia Chen, Kai-Qi Huang, Zhong-Qun Tian May 1998

In-Situ Raman Spectroscopic Study Of The Oxidation And Reduction Of Ag Electrode In Na2So4, Yan-Xia Chen, Kai-Qi Huang, Zhong-Qun Tian

Journal of Electrochemistry

In-situ Raman spectroscopy combined with cyclic voltammogram measurements was used to investigate formation of oxygen species at Ag electrode surfaces during the oxidation and reduction process in 0.1 mol/L Na2SO4 solution. The time dependent Raman spectra show that at potentials positive of 0.2 V, adsorption of oxygen atom occurs, while at the potentials positive of 0.4 V, some oxygen atoms migrate into subsurface of the Ag electrode and the other form strongly bound oxygen on the surface through chemical bond. At the same potentials, part of the silver atoms are oxidized and form Ag2SO4 …


Studies Of Surface Electrochemistry And Electrocatalysis At Atomic And Molecule Level, Shigang Sun Feb 1998

Studies Of Surface Electrochemistry And Electrocatalysis At Atomic And Molecule Level, Shigang Sun

Journal of Electrochemistry

The main progresses achieved during last few years in our research group concerning studies of surface electrochemistry and electrocatalysis were reviewed in this present paper. Four topics were described: 1) the surface electrochemistry and model electrocatalysis of metal single crystal planes, 2) the electrocatalytic reaction mechanism and the control of reaction pathways at molecule level, 3) the reaction kinetics of electrooxidation of small organic molecules, and 4) the relationship between the properties and the surface chemical states of electrocatalyst. This review lays in emphasis on the demonstration of the results as well as the research direction of surface electrochemistry and …


Study On The Synthesis And Electrochemical Behavior Of Poly (Quinonoid-Disulfide), Xiaohui Tang, Xiuwu Sun, Yongfang Li, Shibi Fang Feb 1998

Study On The Synthesis And Electrochemical Behavior Of Poly (Quinonoid-Disulfide), Xiaohui Tang, Xiuwu Sun, Yongfang Li, Shibi Fang

Journal of Electrochemistry

Organic polydisulfide containing quinonoid structure was synthesized by chloromethylation, oxidation by nitric acid, and condensation polymerization with sodium disulfide. The effect of quinonoid structure on the electrochemical behavior of organic polydisulfide was investigated with cyclic voltammetry and chargedischarge measurement. The result shows that quinonoid struture mainly affects the positions of redox peaks of organic polydisulfide, open circuit voltage and discharge platform voltage of cell with the organic polydisulfide as cathode.


The Investigations Of Surface Treatment Methods And Characterization Of Oxide Films On Ab5 Based Metal Hydride Electrodes Ⅰ. New NiRich Treatment Methods And Photoelectrochemical Characterization Of Oxide Films, Junmin Nan, Yong Yang, Jun Li, Zugeng Lin Feb 1998

The Investigations Of Surface Treatment Methods And Characterization Of Oxide Films On Ab5 Based Metal Hydride Electrodes Ⅰ. New NiRich Treatment Methods And Photoelectrochemical Characterization Of Oxide Films, Junmin Nan, Yong Yang, Jun Li, Zugeng Lin

Journal of Electrochemistry

Two simple and efficient surface treatment methods for AB5 type hydrogen storage alloys were developed. The results of X-ray photoelectron spectroscopy (XPS) and cyclic voltammetric (CV) experiments showed that the hydrogen storage alloys treated by two different methods had Ni rich surface layer so that the performances of the electrodes were improved after treatment. The characterization of the oxide films which formed on the surface of electrodes through potentiodynamic oxidation with the help of photoelectrochemical microscopy (PEM) were done. The anodic photocurrent and the cathodic photocurrent related to the oxidation of hydrogen and the reduction of oxygen on the …


A Study On Heterogeneous Indirect Electrosynthesis Of Benzaldehyde, Daobao Chu, Changjian Lin, Huashui Lin, Jianguang Tan Feb 1998

A Study On Heterogeneous Indirect Electrosynthesis Of Benzaldehyde, Daobao Chu, Changjian Lin, Huashui Lin, Jianguang Tan

Journal of Electrochemistry

Heterogeneous indirect electrosynthesis process of benzaldehyde has been investigated using cyclic voltammetry and polarization curves. An optimum condition for preparation of benzaldehyde by indirect electrooxidation of toluenc with redox Mn3+/Mn2+ is given in this paper. Electrolytic regeneration Mn3+ are made at Pt/Ti anode in “slurry” MnSO4/H2SO4 medium. Current efficiency for electrolytic regeneration Mn3+  was maintained over 88% by “double cyclic way”.


Investigation Of Methanol Anode Electrooxidation Catalysts, Gangyao Wen, Ying Zhang, Zhenglong Yang, Changzhi Li Feb 1998

Investigation Of Methanol Anode Electrooxidation Catalysts, Gangyao Wen, Ying Zhang, Zhenglong Yang, Changzhi Li

Journal of Electrochemistry

A series of catalysts, Pt-WO3/C, Pt/Ru/C and Pt-Ru-WO3/C were prepared by chemical reduction deposition. Electrocatalytic oxidation of methanolon different catalyst/Nafion membrane electrodes was studies by voltammetry and current-potential polarization. The results indicated that the catalytic activity order of different catalysts is as follows: Pt-Ru-WO3/C > Pt-Ru/C > Pt-WO3/C. At the same time, influences of methanol concentrations and catalyst proportion on performances of anodes were also studies.


Progresses In Surface Electrochemistry And Electrocatalysis ——A Review On The 1997 Joint International Meeting Of Electrochemistry And 97' International Meeting Of Surface Electrochemistry, Shigang Sun Feb 1998

Progresses In Surface Electrochemistry And Electrocatalysis ——A Review On The 1997 Joint International Meeting Of Electrochemistry And 97' International Meeting Of Surface Electrochemistry, Shigang Sun

Journal of Electrochemistry

The progresses in surface electrochemistry and electrocatalsis reported in the 1997 joint international meeting of electrochemistry and in the 97′ international meeting of surface electrochemistry were reviewed. The main trends described in this paper consisted of 7 aspects: 1) the studies employing single crystal electrodes, 2) the development of in situ methods of diverse spectroscpoy, 3) the innovation of new research techniques, 4) the preparaton of electrocatalyst of high performances, 5) the quantitative studies on kinetics of electrocatalytic reactions, 6) the investigation on the dynamic processes of surface by timeresolved methods, and 7) the theoretical modeling and simulation of surface …


Molten Carbonate Fuel Cell Materials And Technology, Naichao Li, Baolian Yi Nov 1997

Molten Carbonate Fuel Cell Materials And Technology, Naichao Li, Baolian Yi

Journal of Electrochemistry

Molten Carbonate Fuel Cell materials are reviewed, and the technology of Molten Carbonate Fuel Cell are discussed.


Study On Perchlorate Produced By Electrolysis With Oxygen Cathode, Zhigang Shao, Baolian Yi, Naichao Li, Ming Han Nov 1997

Study On Perchlorate Produced By Electrolysis With Oxygen Cathode, Zhigang Shao, Baolian Yi, Naichao Li, Ming Han

Journal of Electrochemistry

A new method of measuring the flow capacity of cell gas in the perchlorate cell process equipped with an oxygen cathode is applided to investigate the influence of changes in the concentration of solution (chloride, chlorate, perchlorate and metal ion) and changes in the operation parameters (current density, temperature and pH) on perchlorate current efficiency. The main abstacle that the oxygen cathode is used in the perchlorate cell process is put forward and a method is provided to resolve it.


The Activity Of Alloy Cu-Ni Electrode In Electroreduction Of Aromatic Nitro-Compounds, Chunan Ma, Shaoping Tong, Xiaojun Cheng, Hui Wang Nov 1997

The Activity Of Alloy Cu-Ni Electrode In Electroreduction Of Aromatic Nitro-Compounds, Chunan Ma, Shaoping Tong, Xiaojun Cheng, Hui Wang

Journal of Electrochemistry

Cu-Ni alloy on the basis of copper at different ratio Cu/Ni are prepared by codepostion. The cathode activtiy of film are studied by steady-state polarization for electroreduction nitro-benzene (NB) and 1,5-dinitroanthraquinone (1,5-DNA) to p-aminophenol and 1,5-diamino-4,8-dihydroanthraquinone respectly. The results show that the alloy cathodes at different ratio Cu/Ni have different exchange current density (io) and apparent activition energy (EA). The alloy (CN-30) has maximal io and minimal EA by codeposition at the following conditions: electrolyte: 0.05 mol/L CuSO4·5H2O+0.6 mol/L NiSO4·6H2O+0.25 mol/L Na3Cit·2H2O; …


Study On The Oxygen Electrodes Of Alkaline Fuel Cells Effect Of Dopant On The Activity Of Ag/C Catalyst, Jiawei Teng, Linhua Jin, Luncheng Tang Nov 1997

Study On The Oxygen Electrodes Of Alkaline Fuel Cells Effect Of Dopant On The Activity Of Ag/C Catalyst, Jiawei Teng, Linhua Jin, Luncheng Tang

Journal of Electrochemistry

A new kind of nonnoble catalyst for the oxygen electrodes of Alkaline Fuel Cells was investigated. The AgNiBiHg/C catalyst, which was prepared by chemical reduction, was active for the cathodic reduction of oxygen in alkaline fuel cells. It was found that the catalytic activity was improved by adding Ni, Bi, Hg to Ag/C catalyst, and the maximum activity was observed at Ag50%-Ni2%-Bi3%-Hg3%-C42%(wt%). XRD inconjunction with SEM indicated that the crystalline silver turned into amorphous in the presence of doping agents and the grain size of silver was reduced. No dramatic deactivation of the catalyst occured after 5200 hours of service.


Electrocatalytic Oxidation Of Methanol On The Stearate Nickel L-B Film, Benzeng Hua, Wenyan Hu, Yanzhen Chen, Yanhong Zhang Aug 1997

Electrocatalytic Oxidation Of Methanol On The Stearate Nickel L-B Film, Benzeng Hua, Wenyan Hu, Yanzhen Chen, Yanhong Zhang

Journal of Electrochemistry

The stearate nickel L-B films is good electroacatlyst for the oxidation of methanol MeOH in alkaline. The electrochemical behaviors of stearate nickel L-B films is affected by the concentration of KOH. The rate of quantity of mickel ion and stearic acid in L-B films is 1∶1, which means that the nickel ion may exist in -COONi(OH) form. The electrocatalytic process is influenced by the concentration of OH-, it involves the penetration of MeOH into the films. The oxidative currents of MeOH are linearly dependent on the bulk concentration.


Study On Electrochemical Methods Of Controlled Convolution ——A Simple Electron Transfer Reaction Followed By A Homogeneous Catalytic Reaction(Ⅰ), Ming Ma, Naixian Xie, Qianlei Gao, Yue Zeng Aug 1997

Study On Electrochemical Methods Of Controlled Convolution ——A Simple Electron Transfer Reaction Followed By A Homogeneous Catalytic Reaction(Ⅰ), Ming Ma, Naixian Xie, Qianlei Gao, Yue Zeng

Journal of Electrochemistry

A simple electron transfer reaction followed by a homogeneous catalytic reaction is studied in this paper by three kinds of controlled convolution electrochemical experimental methods, which are the constant semi integral (CSI), linear semi integral sweep (LSIS) and linear semi differential sweep (LSDS). According to the three methods, the following equations can be obtained. With these equations, the theoretical curves of the above three methods can be computed. Experiments of the ferrocyanide ascorbic acid catalytic system have confirmed that kinetic rate constant in catalytic reaction is in good agreement with the previously reported values.


Investigation On Electro Reduction Behaviour Of Copper Anodic Products In Concentrated Naoh Solutions Ⅱ. Electro Reduction Of Cu(Ⅱ) Products, Jianbo He, Hanhe Chen, Jianxin Lin Aug 1997

Investigation On Electro Reduction Behaviour Of Copper Anodic Products In Concentrated Naoh Solutions Ⅱ. Electro Reduction Of Cu(Ⅱ) Products, Jianbo He, Hanhe Chen, Jianxin Lin

Journal of Electrochemistry

Potentiostatic oxidation potentiodynamic or galvanostatic reduction methods have been used to study the cathodic reduction behaviour of various products anodically formed on the second stage of copper oxidation in concentrated NaOH solutions. Seven cathodic current peaks and the corresponding cathodic potential plateaus are observed on the potentiodynamic E/i curves and the galvanostatic E/t curves, respectively. In the negative potential scan, there are three couples of voltammetric peaks which have been attributed to the formation and reduction of CuO, Cu(OH)2 and Cu(Ⅱ) ion, respectively. The complicated mechanism for the electro formation of the three Cu(Ⅱ) species are discussed.


Preparation And Examination Of Planar Type Solid Oxide Fuel Cells, Yi Jiang, Jingwang Yan, Shizhong Wang, Chunying Yu, Wenzhao Li Aug 1997

Preparation And Examination Of Planar Type Solid Oxide Fuel Cells, Yi Jiang, Jingwang Yan, Shizhong Wang, Chunying Yu, Wenzhao Li

Journal of Electrochemistry

The solid oxide fuel cells of planar type (SOFC) have been developed after successfully preparing La0.8Sr0.2MnO3 cathodes and Ni-YSZ ceramic anodes on YSZ plates and solving the high temperature sealing technical problem. Examination of the single cells fabricated showed that the maximum power output at 950 ℃ for H2 as fuel and air as oxidant reached 0.12 W/cm2. It was found that the large polarization overpotential of the Ni-YSZ anode and the Ohmic losses of the cells were two main factors responsible for the relative low output power density.


Studies Of Electrocatalytic Properties Of Electrode Of Dispersed Pt On Gc Support In Ethylene Glycol Oxidation, Shengpei Chen, Shigang Sun, Zhiyou Zhou, Shuanjing Hong May 1997

Studies Of Electrocatalytic Properties Of Electrode Of Dispersed Pt On Gc Support In Ethylene Glycol Oxidation, Shengpei Chen, Shigang Sun, Zhiyou Zhou, Shuanjing Hong

Journal of Electrochemistry

The structures and properties of electrocatalyst of dispersed Plutinum (Pt) on glassy carbon (GC) support under different conditions were studied using cyclic voltammetry, potential step technique, X-ray diffraction (XRD) and scanning Electron microscopy (SEM). The results indicated that after having been treated in high temperature,the dispersed Pt on GC support was recrystallised with preferented orientation, and the grain of Pt microcrystal become large and regular. It was illustrated that the dispersed Pt on GC support after high temperature treatment exhibited better stability and high activity for ethylene glycol oxidation.


Polymer Electrolyte Fuel Cell Powered Vehicles, Naichao Li, Baolian Yi May 1997

Polymer Electrolyte Fuel Cell Powered Vehicles, Naichao Li, Baolian Yi

Journal of Electrochemistry

The background, status and commercialization prospect of polymer electrolyte fuel cell vehicles are surveyed in this paper. The technology of this cell and system used in vehicles is discussed.


Electrochemical Behavior Of Superoxide Dismutase On Gold Minigrid With Thin Layer Cell, Xiaqin Wu, Qian Liu, Bin Xu, Xiaoyun Men, Zongrang Zhang May 1997

Electrochemical Behavior Of Superoxide Dismutase On Gold Minigrid With Thin Layer Cell, Xiaqin Wu, Qian Liu, Bin Xu, Xiaoyun Men, Zongrang Zhang

Journal of Electrochemistry

The electrochemical behavior of superoxide dismutase (Cu, Zn-SOD) was investigated on gold wire electrode and gold minigrid with thin layer cell by cyclic voltammetry. A quasi reversible redox wave of SOD has obtained on gold minigrid thin layer electrode, but only oxidation peak has observed on gold wire electrode. The electrochemical reaction parameters, such as the formal potential E0′, diffusion coefficient D and standard rate constant k0′ were estimated.


Surface Modification Of Molten Carbonate Fuel Cell Anode, Baizeng Fang, Xinyu Liu, Xindong Wang, Shuzhen Duan May 1997

Surface Modification Of Molten Carbonate Fuel Cell Anode, Baizeng Fang, Xinyu Liu, Xindong Wang, Shuzhen Duan

Journal of Electrochemistry

In this study, the anode material of molten carbonate fuel cell was modified by the deposition of niobium on nickel surface. The results of polarization experiments reveal that the corrosion resistant properties as well as electrocatalytic activity have been improved greatly.


Electrochemical Synthesis And Characterization Of Ba-Pb-O And Bi-Pb-O Oxides, Min Xie, Liangzhong Zhao, Cuiying Xu, Jinbiao Zhang Feb 1997

Electrochemical Synthesis And Characterization Of Ba-Pb-O And Bi-Pb-O Oxides, Min Xie, Liangzhong Zhao, Cuiying Xu, Jinbiao Zhang

Journal of Electrochemistry

Pb-based oxides Ba-Pb-O and Bi-Pb-O were synthesized from aqueous solutions by using electrochemical method. The resulting Ba-Pb-O and Bi-Pb-O were characterized using XPS, EDX and XRD. The results show that perovskite BaPb0.9O3 can be electrodeposited on the anode only from strong alkaline solution. In acid aqueous solution, conducting BiPb2Oz oxide is fromed on the anode. In these oxides the nominal valence of lead is +4.


Surface Modifications Of Carbon Materials Used As Anode Of Lithium Ion Battery Ⅰ. Influences Of Oxidation And Reduction Pretreatment On Anode Performance, Shuhua Ma, Hanju Guo, Ji Li, Hongze Liang, Xiabin Jing, Fosong Wang Nov 1996

Surface Modifications Of Carbon Materials Used As Anode Of Lithium Ion Battery Ⅰ. Influences Of Oxidation And Reduction Pretreatment On Anode Performance, Shuhua Ma, Hanju Guo, Ji Li, Hongze Liang, Xiabin Jing, Fosong Wang

Journal of Electrochemistry

The influences of the trace oxygen containing functional groups on surface of carbon material on cell performance of carbon anode for lithium ion batteries were studied by means of the pretreament in various oxidant/reductant systems. The results showed that the rich oxygen containing functional groups impaired the cell performance of carbon material anode, and the reduction of these groups in quantity and oxidation degree can increase charge/discharge capacity and improve first charge/discharge efficiency. The reason was also discussed in the light of effects of surface organic groups on decomposition reactivity of electrolyte and formation process of surface passivating film.


An Esr Study Of Free Radicals In Electroreduction Process Of Allyl Alcohol, Jindong Zhang, Yafei Kuang, Shukun Huang, Naixian Xie, Fengzhen Wang, Dewen Chen Aug 1996

An Esr Study Of Free Radicals In Electroreduction Process Of Allyl Alcohol, Jindong Zhang, Yafei Kuang, Shukun Huang, Naixian Xie, Fengzhen Wang, Dewen Chen

Journal of Electrochemistry

Electrochemical-ESR technique with spin trap phenyl-t-butyl nitrone(PBN)was used to study the intermediates of electroreduction of allyl alcohol at platinized platinum electrode in acidic alcohol-aqua solution. Hydrogen and allyl group and(or)propyl group radicals were identified by a hyperfine spectrum of the radical adducts, and that provided a direct evidence for the presence of these radicals in the electroreduction of allyl alcohol.