Chemical Engineering Commons^™

Hybrid Modeling For Electrochemical Systems, Luis Alejandro Briceno-Mena

LSU Doctoral Dissertations

The discovery of new materials like catalysts, polymeric films, and biomolecules, is driven by industrial needs such as improving reaction or separation selectivity, enhancing therapeutic effects on medical treatments, or reducing costs of replacement. However, deployment of these advances in industrial applications is often hindered by the lack of models needed for design and optimization. Due to the novelty of materials and devices, experimental data and first principles' knowledge are scarce, making it hard to build models either via data-driven or knowledge based approaches. In this context, a way to efficiently combine domain knowledge with data could provide a pathway …

Seismic Azimuthal Anisotropy Beneath A Fast Moving Ancient Continent: Constraints From Shear Wave Splitting Analysis In Australia, Kailun Ba, Stephen S. Gao, Jianguo Song, Kelly H. Liu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Seismic Azimuthal Anisotropy Beneath Australia is Investigated using Splitting of the Teleseismic PKS, SKKS, and SKS Phases to Delineate Asthenospheric Flow and Lithospheric Deformation Beneath One of the Oldest and Fast-Moving Continents on Earth. in Total 511 Pairs of High-Quality Splitting Parameters Were Observed at 116 Seismic Stations. Unlike Other Stable Continental Areas in Africa, East Asia, and North America, Where Spatially Consistent Splitting Parameters Dominate, the Fast Orientations and Splitting Times Observed in Australia Show a Complex Pattern, with a Slightly Smaller Than Normal Average Splitting Time of 0.85 ± 0.33 S. on the North Australian Craton, the Fast …

A Systematic Design Approach For Bulk Gel Treatments Based On Gel Volume-Concentration Ratio In Field Projects, Munqith Aldhaheri, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Controlling excessive water production in mature oil fields has always been a desired objective of the oil and gas industry. This objective calls for planning of more effective water-control gel treatments with optimized designs to obtain more attractive outcomes. Unfortunately, planning such effective treatments remains a dilemma for reservoir engineers due to the lack of methodical design tools in the industry. This paper presents a novel systematic design approach for polyacrylamide-Based bulk gel treatments by classifying their field projects according to the gel volume-concentration ratio (VCR) into three design types. in terms of one another, the approach estimates either the …

Design And Applications Of Fmoc-Histidine And Aspartic Acid Tripeptides As Proton Conductive Materials, Shejla S. Pollozi

Dissertations, Theses, and Capstone Projects

The increasing demand for clean and sustainable energy has driven forward rapid improvements in polymer-electrolyte fuel cells and the use of ion-conducting polymers (ionomers) as proton exchange membranes and catalyst binders. While perfluorinated electrolytes have been commercially used as conductive membranes for nearly four decades, a new class of sustainable, conductive materials has emerged, inspired by the efficiency of charge transport processes in biological systems. These molecules, knows as peptide amphiphiles (PAs), have gained popularity as building blocks for the bottom-up fabrication of nanomaterials through supramolecular self-assembly. Supramolecular nanostructures, often in the form of hydrogels, are held together via non-covalent …

Coreflooding Evaluation Of Fiber-Assisted Recrosslinkable Preformed Particle Gel Using An Open Fracture Model, Shuda Zhao, Ali Al Brahim, Junchen Liu, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Recrosslinkable Preformed Particle Gels (RPPGs) Have Been Used to Treat the Problem of Void Space Conduits (VSC) and repair the "Short-Circuited" Waterflood in Alaska's West Sak Field. Field Results Showed a 23% Increase in Success Rates over Typical Preformed Particle Gel (PPG) Treatments. in This Paper, We Evaluated Whether Adding Fiber into RPPGs Can Increase the RPPG Plugging Efficiency and Thus Further Improve the Success Rate. We Designed Open Fracture Models to Represent vs.C and Investigated the Effect of Swelling Ratio (SR), Fracture Size, and Fiber Concentration on Gel Injection Pressure, Water Breakthrough Pressure, and Permeability Reduction. Results Show that …

Preface To Special Issue: Electrocatalysis And Electrosynthesis, Fang-Yi Cheng, Shuang-Yin Wang, Tian-Hua Zhou

Journal of Electrochemistry

No abstract provided.

Recent Advances In Exploring Highly Active & Durable Pgm-Free Oxygen Reduction Catalysts, Yuan Li, Miao-Ying Chen, Bang-An Lu, Jia-Nan Zhang

Journal of Electrochemistry

In order to reduce the considerable usage of expensive but scarce platinum at the cathode in proton exchange membrane fuel cells (PEMFCs), it is necessary to pursue alternatives to platinum. The most promising platinum group metal (PGM)-free catalysts for oxygen reduction reaction (ORR) are atomically dispersed, and nitrogen-coordinated metal site catalysts denoted as M-N-C (M = Fe, Co, or Mn, etc.). Over the last few decades, there have been great advances in these catalysts with high ORR activity and promising initial fuel cell performance approaching traditional Pt/C catalysts. However, the stability of these highly active Fe-N-C catalysts under practical fuel …

Electrochemical Oxidation Of Ethylene On Palladium Electrode, Wei-Xing Wu, Ying Wang

Journal of Electrochemistry

The electrochemical oxidation of C₂H₄ is attracting increasing attention due to its vast potential market. The current electrochemical methods rely on the use of redox mediators, which may produce corrosive intermediates, while direct oxidation is still limited by its low activity and selectivity. Herein, we conducted electrochemical studies to obtain mechanistic insights into the benchmark Pd catalyst. The generated Pd(II) could be the active site for C₂H₄ oxidation. By designing the pulse sequence, we found the ratio of strongly and weakly adsorbed C₂H₄ on Pd to be 0.3:1. The result we …

Supperlattice-Like Structure: Ordered Mass Transfer Endowing High Quality Output Of Fuel Cell, Jian Wang, Wen-Hui Xuan, Qian He, Jing-Xia Jiang, Yuan-Yuan Zhou, Yao Nie, Qiang Liao, Min-Hua Shao, Wei Ding, Zi-Dong Wei

Journal of Electrochemistry

The current or voltage fluctuation in fuel cell operation is harmful to the fuel cell system and power application equipment. Here, we report a technique to eliminate such a fluctuation by the aid of new type of catalysts, superlattice-like mesoporous PtCo catalysts. The current fluctuation in fuel cells catalyzed by two invented catalysts are fixed at as low as 25 mA·cm⁻² with a power of 0.75 W·cm⁻² or 120 mA·cm⁻² with a power of 1.01 W·cm⁻², and no noticeable current decay was detected over 100 h. By contrast, a …

Lysine Crosslinked Polyacrylamide─A Novel Green Polymer Gel For Preferential Flow Control, Tao Song, Baojun Bai, Yugandhara Eriyagama, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Acrylamide-based polymer gels have been applied to control the preferential flow in the subsurface for decades. However, some commonly used crosslinkers, such as Cr (III) and phenol-formaldehyde, are highly toxic and are being phased out because of stringent environmental regulations. This work uses l-lysine as the green crosslinker to produce acrylamide-based polymer gels. This article systematically studied the effect of lysine and polymer concentration, salinity, pH, and temperature on gelation behavior and thermal stability. Besides, the gelation mechanism and crosslinking density were elucidated in this work. A high-permeability sandstone core was used to test the plugging efficiency of this novel …

Development Opportunities And Technical Challenges Of Industrialization For Hydrogen Production From Bio-Ethanol Reforming, Xue Han, Hong He, Guojun Yue, Hailong Lin, Jinsong Liu, Bin Yu

Bulletin of Chinese Academy of Sciences (Chinese Version)

Bio-ethanol reforming for hydrogen production, using renewable raw materials and adopting mature and efficient chemical processes, is an important source of green hydrogen supply to achieve the goals of carbon peaking and carbon neutrality. Bio-ethanol is a widely used substitute for fossil fuels. With the continuous progress of cellulosic ethanol technology in recent years, bio-ethanol will gradually break through the constraints of starch-based raw material supply. Based on the industrialization achievements of hydrogen production and bio-ethanol, bio-ethanol reforming can realize a rapid linkage with the existing hydrogen energy industry. However, the existence of a carbon-carbon signal bond in ethanol poses …

Development Of Battery Materials To Function As Corrosion Protection On Car Body Plates, Tubagus Noor Rohmannudin, Sulistijono Sulistijono, Noval Adrinanda, Faridz Wira Dharma, Samuel Areliano

Journal of Materials Exploration and Findings

Most car bodies made for mass production are made from steel or aluminum. Both are strong metals, but steel is cheaper than aluminum and is more commonly used in lower-end cars for a broader consumer range. The weakness of steel compared to aluminum is that it is susceptible to corrosion under certain conditions, and thus it may deteriorate over time without proper care. To prevent corrosion, modern cars are coated with paint to prevent direct contact with the environment. As a second line of protection, a car battery can be connected to the body to create an impressed current cathodic …

Potential Of Biduri Fiber (Calotropis Gigantea) As Material For Oil Spill Absorbent, Anne Sukmawati, Wulan Septiani

Journal of Materials Exploration and Findings

Biduri fiber (Calotropis gigantea) is a natural hollow fiber with hydrophobic and oleophilic properties potentially used as oil spilled sorbent from seawater. This study aims to determine the absorption capacity and efficiency of the Biduri fiber and membrane to fuel oil. Measurement of oil absorption to seawater was carried out at various fiber weights (0.5-1.5 g), fiber composition (50-95%), contact time (10-90 minutes), temperature (30 and 50°C), and compared with commercial products. The results showed that the fiber weight variation of 0.5-1.5 g has an average absorption efficiency of 96.67%, and the highest absorption was obtained in a weight of …

Influence Of Synthesis Conditions On The Physicochemical And Electrocatalytic Properties Of Non-Stoichiometric Ba2sr2la2ti4o12 Perovskites, Ofeliya Kostadinova, Iliyan Popov, Simeon M. Stankov, Hristo Kolev, Tamara Petkov

Karbala International Journal of Modern Science

Present work studies the influence of the pretreatment milling media (deionized water (BLTOS-H) and isopropanol (BLTOS-i)) on the surface characteristics, structure, chemical composition and catalytic activity of non-stoichiometric Ba2Sr2La2Ti4O12 perovskites. The IR spectroscopy and XRD analyses shows a difference in the structure and phase composition of the two materials. X-ray photoelectron spectroscopy detects a Ba2+- and La3+-enriched and Sr2+-depleted surface. The BLTOS-i sample appears to exhibit higher specific surface area (SSA) and pore volume in comparison to BLTOS-H. The electrochemical tests showed that BLTOS-H sample have similar behavior to platinum at current densi-ties up to 10 mA cm-2, while BLTOS-i …

Using Computational Fluid Dynamics And Optical Sensor Technology To Scale Cell Culture Platforms, Mandar Makwana

KGI Theses and Dissertations

Different cell culture vessels ranging from micro scale to laboratory scale to commercial scale play critical role in upstream process development for biologics manufacturing. Based on the mode of operation, cell culture vessels have different hydrodynamic environments, making it challenging to scale. Integrated approaches using computational tools supported by experimental studies can overcome these challenges. Computational Fluid Dynamics (CFD) is one such tool that can simulate hydrodynamics within the cell culture vessels and can provide insights at macro and micro-scale. Accuracy of a CFD model significantly depends on the fluid model and assumptions. Traditionally, simple two-equation fluid models were developed …

Comparative Static And Dynamic Analyses Of Solvents For Removal Of Asphaltene And Wax Deposits Above- And Below-Surface At An Iranian Carbonate Oil Field, Milad Norouzpour, Amin Azdarpour, Rafael M. Santos, Ali Esfandiarian, Moein Nabipour, Erfan Mohammadian, Abbas K. Manshad, Alireza Keshavarz

Research outputs 2022 to 2026

During production from oil wells, the deposition of asphaltene and wax at surface facilities and porous media is one of the major operational challenges. The crude oil production rate is significantly reduced due to asphaltene deposition inside the reservoir. In addition, the deposition of these solids inside the surface facilities is costly to oil companies. In this study, the efficiency of different solvents in dissolving asphaltene and wax was investigated through static and dynamic tests. The analysis of solid deposits from the surface choke of one of the Iranian carbonate oil fields showed that they consisted of 41.3 wt % …

Outstanding Advantages, Current Drawbacks, And Significant Recent Developments In Mechanochemistry: A Perspective View, Silvina Pagola

Chemistry & Biochemistry Faculty Publications

Although known since antiquity, mechanochemistry has remained dormant for centuries. Nowadays, mechanochemistry is a flourishing research field at the simultaneous stages of gathering data and (often astonishing) observations, and scientific argumentation toward their analysis, for which the combination of interdisciplinary expertise is necessary. Mechanochemistry’s implementation as a synthetic method is constantly increasing, although it remains far from being fully exploited, or understood on the basis of fundamental principles. This review starts by describing many remarkable advantages of mechanochemical reactions, simplifying and “greening” chemistry in solutions. This description is followed by an overview of the current main weaknesses to be addressed …

More On The Demons Of Thermodynamics, Daniel P. Sheehan, Garret Moddel, James W. Lee

Chemistry & Biochemistry Faculty Publications

No abstract provided.

Phosphorus Release And Recovery From Simulated Ferric Wastewater Sludge, Aseel Alnimer

Theses and Dissertations (Comprehensive)

Phosphorus (P) is a fundamental element necessary for all life forms and a key component in the fertilizer industry. Meanwhile, the excessive load of P to water bodies due to human activities has the potential to promote eutrophication. Wastewater treatment plants remove P either biologically or chemically and produce P rich sludge which could be a potential renewable source for P. At present, commercial technologies exist for P recovery from biological wastewater sludge. However, P recovery from chemical sludge particularly iron(III)-phosphate (Fe-P) sludge generated in chemical P removal plants that use iron(III) salts remains a challenge.

This study explored, in …

Impact Of Spallation And Internal Radiation On Fibrous Ablative Materials, Raghava Sai Chaitanya Davuluri

Theses and Dissertations--Mechanical and Aerospace Engineering

Space vehicles are equipped with Thermal Protection Systems (TPS) that encounter high heat rates and protect the payload while entering a planetary atmosphere. For most missions that interest NASA, ablative materials are used as TPS. These materials undergo several mass and energy transfer mechanisms to absorb intense heat. The size and construction of the TPS are based on the composition of the planetary atmosphere and the impact of various ablative mechanisms on the flow field and the material. Therefore, it is essential to quantify the rates of different ablative phenomena to model TPS accurately. In this work, the impact of …

Photocatalytic Reforming Of Lignocellulose: A Review, Xinyuan Xu, Lei Shi, Shu Zhang, Zhimin Ao, Jinqiang Zhang, Shaobin Wang, Hongqi Sun

Research outputs 2022 to 2026

Biomass has been considered as a promising energy resource to combat the exhaustion of fossil fuels, as it is renewable, sustainable, and clean. Photocatalytic reforming is a novel technology to utilize solar energy for upgrading biomass in relatively mild conditions. This process efficiently reforms and recasts biomass into hydrogen and/or valuable chemicals. To date, lignocellulose, including cellulose, hemicellulose and lignin, has attracted extensive studies in facile photocatalytic valorisation. This review summarizes and analyzes the most recent research advances on photoreforming of lignocellulose to provide insights for future research, with a particular emphasis on the reformation of lignin because of its …

Comparative Study On Development Of Novel Catalytic Oxidation For Removing Emerging Contaminants, Abdul H. Asif

Theses: Doctorates and Masters

‘Wastewater treatment’ is not itself a new concept, where global water bodies have been polluted since the evolution of mankind. As a result of human activities including domestic, industrial and commercial practices, levels of water pollution through aqueous contaminants are increasing every day. Moreover, rapid industrialisation and recent human progress has given rise to a new classification of pollution, that of emerging contaminants (ECs). Further, these chemicals are highly resistant to biodegradation and are capable of travelling, where they can penetrate from one part of the world to another. Whilst traditional wastewater treatment techniques, such as adsorption, might be effective …

Enhancing Control Room Operator Decision Making: An Application Of Dynamic Influence Diagrams In Formaldehyde Manufacturing, Joseph Mietkiewicz, Anders L. Madsen

Articles

Intoday’s rapidly evolving industrial landscape, control room operators must grapple with an ever-growing array of tasks and respon sibilities. One major challenge facing these operators is the potential for task overload, which can lead to decision fatigue and increased reliance on cognitive biases. To address this issue, we propose the use of dynamic influence diagrams (DID) as the core of our decision support system. By monitoring the process over time and identifying anomalies, DIDs can recommend the most effective course of action based on a probabilistic assessment of future outcomes. Instead of letting the operator choose or search for the …

Ambient Ammonia Synthesis Via Microwave-Catalytic Materials And Plasma Chemistry, Siobhan Brown

Graduate Theses, Dissertations, and Problem Reports (ETD)

Ammonia is critical to supporting human life on earth because of its use as fertilizer. The Haber-Bosch process to produce ammonia has been practiced for over 100 years. This process operates at high pressure and temperature to overcome the thermodynamic and kinetic limitations of the ammonia synthesis reaction thus researchers have tried to overcome it for decades. At present this process represents 1% of global energy usage and 2.5% of global CO₂ emissions. The proposed chemical looping ammonia synthesis approach seeks to reduce the environmental impact of this critical process and to elucidate microwave-catalytic principles.

This research aims to …

Studies On Non-Transition Metal Substitution To Ab2 Metal Hydride Alloys For Battery Application, Shiuan Chang

Wayne State University Dissertations

Nowadays, multiphase transition metal-based AB2 metal hydride alloys and the rare-earth metal-based AB5 alloys (currently used in consumer NiMH batteries) are used as negative electrodes in NiMH batteries. It is of great interest to explore the possibility of significantly improving NiMH battery performance to compete with Li-ion batteries. In this area, the effect of dopant elements from Group-IA, -IIA, -IIIA non-transition metal family has not been thoroughly studied. In this study, lithium, magnesium, and boron (a metalloid considered metal in this study) were chosen as modifiers in the C14-phase predominant AB2 alloy by different dopant concentrations and synthesis methods, doping …

Optimal Design And Operation Of Integrated Hydrogen Generation And Utilization Plants, Ijiwole Solomon Ijiyinka

Graduate Theses, Dissertations, and Problem Reports (ETD)

There are considerable efforts worldwide for reducing the use of fossil fuel for energy production. While renewable energy sources are being increasingly used, fossil fuel still contribute about 80% of the energy used worldwide. As a result, the level of CO₂ is still increasing fast in the atmosphere currently exceeding about 410 parts per million (ppm). For reducing CO₂ build up in the atmosphere, various approaches are being investigated. For the electric power generation sector, two key approaches are post-combustion CO₂ capture and use of hydrogen as a fuel for power generation. These two solutions can also …

Computational Investigation Of A Series Of Small Molecules As Potential Compounds For Lysyl Hydroxylase-2 (Lh2) Inhibition, Yazdan Maghsoud, Erik Antonio Vázquez-Montelongo, Xudong Yang, Chengwen Liu, Zhifeng Jing, Juhoon Lee, Matthew Harger, Ally K. Smith, Miguel Espinoza, Hou-Fu Guo, Jonathan M. Kurie, Kevin N. Dalby, Pengyu Ren, G. Andrés Cisneros

Markey Cancer Center Faculty Publications

The catalytic function of lysyl hydroxylase-2 (LH2), a member of the Fe(II)/αKG-dependent oxygenase superfamily, is to catalyze the hydroxylation of lysine to hydroxylysine in collagen, resulting in stable hydroxylysine aldehyde-derived collagen cross- links (HLCCs). Reports show that high amounts of LH2 lead to the accumulation of HLCCs, causing fibrosis and specific types of cancer metastasis. Some members of the Fe(II)/αKG-dependent family have also been reported to have intramolecular O2 tunnels, which aid in transporting one of the required cosubstrates into the active site. While LH2 can be a promising target to combat these diseases, efficacious inhibitors are still lacking. We …

Molecular Elucidation Of Reaction Mechanisms In Aluminum & Lithium Metal Batteries By Solid-State Nmr Spectroscopy And Electrochemical Methods, Leo W. Gordon

Dissertations and Theses

As society wrestles with the ever-growing climate consequences of burning fossil fuels, the increased demand for electric vehicles and renewable power generation mandates safe, sustainable, earth-abundant, low cost, and energy dense batteries. Different use cases will necessitate different types of batteries; for example, stationary storage systems prioritize minimal expense, whereas mobile applications like electric vehicles emphasize high energy densities. Aluminum and lithium metal batteries hold great promise for next-generation energy storage due to their large specific capacities (2980 mA h g^-1, and 3860 mA h g^-1, respectively). In particular, aluminum metal is low cost, has high …

Mechanisms Of Emulsion Destabilization: An Investigation Of Surfactant, Stabilizer, And Detergent Based Formulations Using Diffusing Wave Spectroscopy, Jordan N. Nowaczyk

Theses and Dissertations

Conventional approaches for studying emulsions, such as microscopy and macroscopic phase tracking, present challenges when it comes to establishing detailed mechanistic descriptions of the impact of emulsifier and stabilizer additives. Additionally, while a combination of sizing methods and macroscopic phase tracking can provide insights into droplet size changes and concentration, the use of multiple measurements can be cumbersome and error-prone. It is the focus of this work, to present a new method for studying water in oil (W/O) emulsions that involves using diffusing wave spectroscopy (DWS) to examine the impact of three different surface stabilizing additives at varying concentrations. By …

Transport And Plugging Performance Evaluation Of A Novel Re-Crosslinkable Microgel Used For Conformance Control In Mature Oilfields With Super-Permeable Channels, Adel Alotibi, T. Song, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Preformed particle gels (PPG) have been widely applied in oilfields to control excessive water production. However, PPG has limited success in treating opening features because the particles can be flushed readily during post-water flooding. We have developed a novel micro-sized Re-crosslinkable PPG (micro-RPPG) to solve the problem. The microgel can re-crosslink to form a bulk gel, avoiding being washed out easily. This paper evaluates the novel microgels' transport and plugging performance through super-permeable channels. Micro-RPPG was synthesized and evaluated for this study. Its storage moduli after fully swelling are approximately 82 Pa. The microgel characterization, self-healing process, transportation behavior, and …