Chemical Engineering Commons^™

Investigating The Thixotropy Of Fresh Struvite Cement-Based Composite: Insights On Mechanisms Of The Pastes’ Thixotropic Behavior, Ugochukwu Ewuzie, Abdulkareem O. Yusuf, Damilola Daramola, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

Struvite (ST) recovered during wastewater treatment has been sparsely applied in cement-based composites. This study systematically evaluated the thixotropic behavior of cement-struvite (CST) pastes, a mix of 5–20 % ST by mass of cement, and proposed the interaction mechanisms leading to the pastes' thixotropy. The hysteresis loop area was used to establish the pastes' thixotropy and investigate its relationship with increased ST content, temperature, and yield stress. In the thixotropic behavior model used, the equilibrium shear stress was employed to examine the CST pastes' irreversible change; the characteristic time of deflocculation was used to study the flocs destruction process; and …

Fuzzy Logic-Based Decision Support System For Adoption Of Industry 4.0 Predictive Maintenance By Manufacturing Industries, Fred E. Peter

Tanzania Journal of Engineering and Technology (TJET)

In the context of Industry 4.0, predictive maintenance enhances operational efficiency by optimizing processes, minimizing downtime, and improving cost-effectiveness. However, implementing predictive maintenance requires a systematic approach due to its complexity. This study collected expert input from 15 food and beverage manufacturing industries located in Dar es Salaam, Tanzania, using a purposive sampling technique. Six representatives were selected from each industry, and their opinions were analyzed using MATLAB 7.6 through a fuzzy logic inference system. The analysis focused on key factors influencing Industry 4.0 technology adoption for predictive maintenance, including adoption intention (strategic decision, equipment data, perceived benefit) and perceived …

Energy Optimal Coverage Motion Trajectory Generation Using A Fourth-Order Motion Profile, Mathias Halinga

Tanzania Journal of Engineering and Technology (TJET)

Industrial machines are widely used in manufacturing sector to manufacture several products to meet customer demands. Most of these industries runs all the time throughout a day leading to high operating cost. To cut costs and satisfy customer demand for precise products, industrial machines’ motion generation is important in improving machine motion precision while using less energy. This study presents a coverage motion energy optimization which is generated by linear interpolation of each segment described by the fourth-order motion profile. The phase changes in the profile are attained with continuity of machine kinematic limits jerk, acceleration, and velocity, which are …

Towards Future Sustainable Infrastructure: The Role Of Technical Audit In Tanzania’S Public Works, George C. Haule

Tanzania Journal of Engineering and Technology (TJET)

This study aimed to investigate the vital role and impact of technical audits in promoting sustainable infrastructure development in Tanzania. The role and effects of technical audits in long-term infrastructure development were studied using a mixed-methods approach with both quantitative and qualitative parts. Data were collected through analysis of technical audit documentation, a semi-structured questionnaire, and stakeholder interviews. The study revealed the various dimensions of infrastructure investment projects, including initiation and planning, design, procurement of contractors and consultants, contract management, environment, health, and safety. The technical audit findings reported weaknesses or non-performance issues in infrastructure planning at the national level …

Towards Future Sustainable Infrastructure: The Role Of Technical Audit In Tanzania’S Public Works, George C. Haule

Tanzania Journal of Engineering and Technology (TJET)

This study aimed to investigate the vital role and impact of technical audits in promoting sustainable infrastructure development in Tanzania. The role and effects of technical audits in long-term infrastructure development were studied using a mixed-methods approach with both quantitative and qualitative parts. Data were collected through analysis of technical audit documentation, a semi-structured questionnaire, and stakeholder interviews. The study revealed the various dimensions of infrastructure investment projects, including initiation and planning, design, procurement of contractors and consultants, contract management, environment, health, and safety. The technical audit findings reported weaknesses or non-performance issues in infrastructure planning at the national level …

Vacuum Consistent Electrochemistry In Ionic Liquid Combined With Oxide Epitaxy, Yuji Matsumoto

Journal of Electrochemistry

We introduce our state-of-the art of “vacuum consistent electrochemistry” to an investigation of the interfaces between oxides and ionic liquid (IL). Pulsed laser deposition (PLD) has been one of the powerful and sophisticated techniques to realize nanoscale preparation of high-quality epitaxial oxide thin films. On the other hand, electrochemistry is a simple, very sensitive, and non-destructive analysis technique for solid-liquid interfaces. To ensure the reproducibility in experiment of the interfaces of such epitaxial oxide films, as well as bulk oxide single-crystals, with IL, we employ a home-built PLD-electrochemical (EC) system with IL as an electrolyte. The system allows one to …

Pm Irras Studies Of Organized Molecular Films At A Gold Electrode Surface, Zhang-Fei Su, Ai-Cheng Chen, Jacek Lipkowski

Journal of Electrochemistry

This feature article illustrates the potential of polarization modulation infrared reflection absorption spectroscopy (PM IRRAS) to provide molecular-level information about the structure, orientation and conformation of constituents of thin films at electrode surfaces. PM IRRAS relies on the surface selection rules stating that the p-polarized IR beam is enhanced, while the s-polarized beam is attenuated at the metal surface. The difference between p- and s-polarized beams eliminates the background of the solvent and provides IR spectra at a single electrode potential. In contrast, two other popular in situ IR spectroscopic techniques, namely, subtractively normalized interfacial Fourier transform infrared spectroscopy (SNIFTIRS) …

Ambient Co2 Capture And Valorization Enabled By Tandem Electrolysis Using Solid-State Electrolyte Reactor, Yan-Bo Hua, Bao-Xin Ni, Kun Jiang

Journal of Electrochemistry

Electrocatalytic carbon dioxide reduction is a promising technology for addressing global energy and environmental crises. However, its practical application faces two critical challenges: the complex and energy-intensive process of separating mixed reduction products and the economic viability of the carbon sources (reactants) used. To tackle these challenges simultaneously, solid-state electrolyte (SSE) reactors are emerging as a promising solution. In this review, we focus on the feasibility of applying SSE for tandem electrochemical CO₂ capture and conversion. The configurations and fundamental principles of SSE reactors are first discussed, followed by an introduction to its applications in these two specific areas, …

Quantifying Wellbore Effects During Co2 Sequestration In A Saline Aquifer, Uzoma Johnpaul Ajugwe

USF Tampa Graduate Theses and Dissertations

Carbon capture and storage (CCS) is a strategy for mitigating climate change by reducing greenhouse gas emissions from large stationary sources like fossil-fuel-fired power stations. One method of CCS involves carbon dioxide (CO2) sequestration in deep saline aquifers, where supercritical CO2 is injected into an aquifer. The success of such projects depends on accurate predictions of CO2 behavior within the subsurface, which are obtained through numerical simulations.

TOUGHREACT, a renowned simulation tool, models subsurface fluid flow, geochemical interactions, and solute transport, providing insights into the feasibility of CO2 sequestration projects. A critical aspect of these simulations is the apportioning of …

Performance Evaluation Of Aminated Multi-Walled Carbon Nanotubes Incorporated With Green Synthesized Iron Nanoparticles For Toxic Dyes Sequestration From Textile Wastewater, Titus Chinedu Egbosiuba, Cynthia Chukwuemeka, Jonah Chukwudi Umeuzuegbu, Nwanneka Chibuzo Mmonwuba, Ugochukwu Ewuzie, Monday Uchenna Okoronkwo, Valentine Chikaodili Anadebe, Saheed Mustapha, Ambali Saka Abdulkareem, Jimoh Oladejo Tijani, Ashish Patel, Virendra Kumar Yadav

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study evaluates the performance of aminated multi-walled carbon nanotubes (AM-MWCNTs) integrated with zerovalent iron nanoparticles (ZVI) synthesized using cashew leaf (Anacardium occidentale) extract (AM-MWCNTs@ZVI) for the removal of Congo Red (CR) and Methylene Blue (MB) dyes from textile industrial wastewater. The nanocomposite was characterized using FTIR, XRD, BET, HRSEM, and HRTEM analyses, confirming its functional groups, crystalline structure, and enhanced surface area of 1050.4 m²/g. The ecological risk degree of the textile pollutants was assessed to determine the percentage concentrations of crystal violet, Congo red, methyl orange, methylene blue and rhodamine B. Batch adsorption experiments identified optimal …

Investigation Of Retention And Dehydration Of Preformed Particle Gel For Conformance Control In Fractured Carbonates, Abdulaziz A. Almakimi, Abdullah O. Almansour, Junchen Liu, Baojun Bai, Ibnelwaleed A. Hussein

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Preformed particle gel (PPG) treatment has proved to be among the most effective methods to reduce excessive water production in fractured reservoirs. The blocking ability of PPGs to fractures or fracture-like features is highly dependent on injected gel properties and volume. Gel dehydration during extrusion through fracture is common and has a considerable effect on gel properties, transport, and plugging efficiency. As the gel particles propagate through the fracture, continuous dehydration is often associated and causes the gel to concentrate and require high-pressure gradients to move. Dehydration might be desirable to a certain limit because it can help to form …

Preparation And Modification Of Mxene Composites For Application In Electrochemical Energy Storage, Zhang-Hai You, Ding-Ze Lu, Kiran Kumar Kondamareddy, Wen-Ju Gu, Peng-Fei Cheng, Jing-Xuan Yang, Rui Zheng, Hong-Mei Wang

Journal of Electrochemistry

With the acceleration of advanced industrialization and urbanization, the environment is deteriorating rapidly, and non-renewable energy resources are depleted. The gradual advent of potential clean energy storage technologies is particularly urgent. Electrochemical energy storage technologies have been widely used in multiple fields, especially supercapacitors and rechargeable batteries, as vital elements of storing renewable energy. In recent years, two-dimensional material MXene has shown great potential in energy and multiple application fields thanks to its excellent electrical properties, large specific surface area, and tunability. Based on the layered materials of MXene, researchers have successfully achieved the dual functions of energy storage and …

Three-Dimensional Melamine Carbon Sponge/Nai As Cathode Materials For Sodium-Ion Batteries, Qian-Ying Huang, Yue Liu, Zi-Xin Lin, Shu-Yi Zheng, Ting-Ting Mei, Yu-Ting Tang, Ying-He Zhang, Jun Liu

Journal of Electrochemistry

The sodium-iodine (Na-I) battery exhibits significant potential as an alternative energy storage device to the lithium-ion battery. However, its development is hindered by inadequate electrical and thermal stability, as well as the dissolution and shuttling of polyiodide. In this study, we report a preparation method for melamine carbon sponge (MC) via carbonizing a commercially available kitchen sponge. It was revealed that the as-prepared MC, composed of unique self-growing carbon nanotubes, could provide both physical and chemical adsorption capabilities for intermediate polyiodides to improve the electrochemical performance of NaI. Consequently, the NaI/MC electrode effectively minimized polyiodide dissolution and reduced the electrochemical …

Understanding The Morphology And Mass Transport Resistance Of Mesoporous Carbon-Supported Pemfc Based On Modeling Analysis, Hao Deng, Jia Liu, Zhong-Jun Hou

Journal of Electrochemistry

Mesoporous carbon supports mitigate Pt sulfonic poisoning through nanopore-confined Pt deposition, yet their morphological impacts on oxygen transport remain unclear. This study integrates carbon support morphology simulation with an enhanced agglomerate model to establish a mathematical framework elucidating pore evolution, Pt utilization, and oxygen transport in catalyst layers. Results demonstrate dominant local mass transport resistance governed by three factors: (1) active site density dictating oxygen flux; (2) ionomer film thickness defining shortest transport path; (3) ionomer-to-Pt surface area ratio modulating practical pathway length. At low ionomer-to-carbon (I/C) ratios, limited active sites elevate resistance (Factor 1 dominant). Higher I/C ratios improve …

Theoretical Insights Into The Atomic And Electronic Structures Of Polyperyleneimide: On The Origin Of Photocatalytic Oxygen Evolution Activity, Yi-Qing Wang, Zhi Lin, Ming-Tao Li, Shao-Hua Shen

Journal of Electrochemistry

Polymeric perylene diimide (PDI) has been evidenced as a good candidate for photocatalytic water oxidation, yet the origin of the photocatalytic oxygen evolution activity remains unclear and needs further exploration. Herein, with crystal and atomic structures of the self-assembled PDI revealed from the X-ray diffraction pattern, the electronic structure is theoretically illustrated by the first-principles density functional theory calculations, suggesting the suitable band structure and the direct electronic transition for efficient photocatalytic oxygen evolution over PDI. It is confirmed that the carbonyl O atoms on the conjugation structure serve as the active sites for oxygen evolution reaction by the crystal …

Zn–Assisted Synthesis Of M (Mn/Fe/Co/Ni)-N-C Catalysts For Multifunctional Electrochemical Activity, Kemila A. Chaudhary

Electronic Theses & Dissertations

The design and development of atomically dispersed M-N-C catalysts (metal (M) supported on an nitrogen-carbon (NC) matrix with high multifunctional electrocatalytic performance is desirable but proved to be very challenging. Herein, we synthesized M-N-C catalysts (M = Fe, Co, Mn, and Ni) using Zn-assisted high temperature treatment and characterized using various techniques. The prepared catalysts were tested for their electrocatalytic performance towards oxygen and hydrogen evolution reaction (OER and HER) as well as oxygen reduction reaction (ORR) in alkaline media. The results indicated that Mn-N-C catalyst showed higher performance towards both the ORR (E_1/2 = 0.90 V) and …

Toxicity And Biodegradability Of Novel Boronium Vs Conventional Ammonium Based Anti Microbial Compounds In Wastewater Treatment Systems, Noor Shalan

Poster Presentations

Quaternary ammonium compounds (QACs) are highly effective as disinfectants, herbicides, and pesticides; thus, overuse causes elevated levels of residual toxicity in domestic and industrial wastewater. QACs can be toxic to essential bacteria breaking down pollutants in wastewater treatment plants (WWTPs) and can remain untreated in effluent, harming the environment, and contributing to antibiotic resistance, posing risks to human health. Novel boronium-based antimicrobial compounds have demonstrated efficacy in eliminating bacteria, fungi, and viruses. If the boronium compounds exhibit lower residual toxicity, they could offer a promising alternative to QACs. Because these compounds are still in development, their potential toxicity to the …

Binary Solid/Liquid Equilibrium Of Mixtures Of Thermally Robust Salts And Molecular Compounds For Use As Heat Transfer Fluids, Jared Ridge Mathews

Poster Presentations

Fossil fuels, contributors to climate change that may bear catastrophic consequences, power the entire world. The human species is almost entirely dependent on fossil fuels for energy, but other sources of renewable and environmentally friendly energy must be developed. Concentrated solar power (CSP) is a promising source of renewable energy with hampered potential—better heat transfer fluids (HTFs) are needed for it to be economically feasible. Currently, the HTFs in industrial use are predominantly either synthetic oils or nitrate-based molten salts. Synthetic oils are only stable up to 400 °C, and molten salts often have high melting temperatures, making them prone …

Assessment Of H2s-Induced Cracking Susceptibility In Steam Line Pipes And Weld Zones During Geothermal Well Construction, Riene Kaelamanda Pragitta, Yudha Pratesa

Journal of Materials Exploration and Findings

The susceptibility of steam line pipes, especially in the HAZ (heat-affected zone) and weldment areas, to hydrogen sulfide in the geothermal industry is crucial to understand from the early stages, particularly during construction. The combination of tensile stress from residual stresses after welding and metallurgical phase transformation makes the joint areas vulnerable to sulfide stress cracking. This condition becomes even more extreme when the equipment operates during the well stimulation phase. This research assesses the severity of H₂S-induced cracking using NACE MR0175 and ISO 15156-1 standards, focusing on the effects of pH and partial pressure of H₂S (p_{H₂S …}

Composition And Rich/Lean Loading-Dependent Density Measurements Of A Series Of Aqueous Ionic Amines For Co2 Capture, Claudia Nguyen

Honors Theses

As climate change worsens worldwide, there is a drive to develop more efficient and sustainable methods to mitigate its impact through carbon capture methods like carbon dioxide scrubbing. Carbon scrubbing directly captures carbon dioxide (CO2) emissions from industries or power plants before they are released into the environment. The CO2 captured can be utilized for various applications or can be stored underground. However, this method faces numerous challenges, such as the degradation of the solvent or corrosion of equipment. As a result, research has expanded to find a better medium to overcome these issues. In particular, aqueous ionic amines (AIA) …

Binary Solid/Liquid Equilibrium Of Mixtures Of Thermally Robust Salts And Molecular Compounds For Use As Heat Transfer Fluids, Jared Ridge Mathews

Honors Theses

Fossil fuels, contributors to climate change that may bear catastrophic consequences, power the entire world. The human species is almost entirely dependent on fossil fuels for energy, but other sources of renewable and environmentally friendly energy must be developed. Concentrated solar power (CSP) is a promising source of renewable energy with hampered potential—better heat transfer fluids (HTFs) are needed for it to be economically feasible. Currently, the HTFs in industrial use are predominantly either synthetic oils or nitrate-based molten salts. Synthetic oils are only stable up to 400 °C, and molten salts often have high melting temperatures, making them prone …

Using Gaussian Process Regression To Learn Thermodynamic Equations Of State With Uncertainty Quantification, Austen T. Lee

Chemical Engineering Undergraduate Honors Theses

This study investigates the use of derivative-informed Gaussian Process (GP) models to estimate thermodynamic behavior across temperature and density by building a Helmholtz-based equation of state. Argon, a stable monatomic gas, was chosen as a case study within the vapor region. The GP model was trained using values of experimentally measurable properties found by taking first and second derivatives of the original potential function. Results show that while the GP model offered uncertainty quantification and informed thermodynamic behavior, it predicted values that deviated from the ground truth depending on the property. The model exhibited high confidence in regions with substantial …

A Fuzzy Based Framework For Sustainable Technology Selection In Small-Scale Gold Mining Operations, John M. Kafuku

Tanzania Journal of Engineering and Technology (TJET)

Small-scale gold mining (SSGM) operations in Tanzania has been operating inefficiently due to inadequate mining processing technologies, poor working tools, lack of enough capital, and insufficient electricity. Despite the efforts made by different stakeholders in boosting the sustainability of SSGM yet the sector has not reached the expected goal. This paper proposes a framework for appropriate technology selection to help small scale gold miners in evaluating various gold mineral processing technologies. The framework utilizes the fuzzy logic set theory for technology evaluation and selection. The developed framework for technology selection upon validation provided results that technology adequacy of more than …

Artificial Intelligence Applications For Grid-Connected Solar Inverters, Utkirjon Ubaydullaev, Sarvinoz Mirzaeva, Hasan Mustafoev

Chemical Technology, Control and Management

The increasing global demand for renewable energy has highlighted the importance of grid-connected solar inverters in ensuring efficient and stable power conversion. However, challenges such as fluctuations in solar energy generation, grid disturbances, and power quality issues necessitate advanced control strategies. The integration of artificial intelligence (AI) into solar inverters presents a transformative solution, enhancing performance, adaptability, and reliability in real-world applications.

This review explores the role of AI techniques, including machine learning (ML), deep learning (DL), fuzzy logic, and reinforcement learning (RL), in optimizing key inverter functionalities such as maximum power point tracking (MPPT), fault detection, power quality enhancement, …

Development Of Fuzzy Ontology For Explainable Artificial Intelligence For Decision-Making In Fuzzy Environment, Pavel Kosov

Chemical Technology, Control and Management

In modern artificial intelligence systems, there is an acute need to understand the decision-making logic of "black box" algorithms. Our research proposes an innovative method for increasing the transparency of such systems through the formalization of fuzzy explanatory mechanisms. We have developed an extension of existing ontological approaches by introducing the concept of fuzziness into the structure of explanatory properties, which allows overcoming the fundamental limitations of traditional XAI methods. The proposed formalization is based on the theory of collective mental models and principles of fuzzy logic, providing a more accurate reflection of uncertainty and subjectivity in expert knowledge. Our …

Electrocatalytic Nitric Oxide Reduction To Yield Ammonia Over Fe3C Nanocrystals, Sen Lin, Lang Zhang, Tong Hou, Jun-Yang Ding, Zi-Mo Peng, Yi-Fan Liu, Xi-Jun Liu

Journal of Electrochemistry

Nitric oxide (NO), which generally originates from vehicle exhaust and industrial flue gases, is one of the most serious air pollutants. In this case, the electrochemical NO reduction reaction (NORR) not only removes the atmospheric pollutant NO but also produces valuable NH₃. Hence, through the synthesis and modification of Fe₃C nanocrystal catalysts, the as-obtained optimal sample of Fe₃C/C-900 was adopted as NORR catalyst at ambient conditions. As a result, the Fe₃C/C-900 catalyst showed an NH₃ Faraday efficiency of 76.5% and an NH₃ yield rate of 177.5 μmol·h^–1·cm^{–2 …}

Ordering Degree Regulation Of Pt2Nico Intermetallics For Efficient Oxygen Reduction Reaction, Chen-Hao Zhang, Han-Yu Hua, Jun-Hao Yang, Qian Zhang, Chang Yang, De-Li Wang

Journal of Electrochemistry

Alloying transition metals with Pt is an effective strategy for optimizing Pt-based catalysts toward the oxygen reduction reaction (ORR). Atomic ordered intermetallic compounds (IMC) provide unique electronic and geometrical effects as well as stronger intermetallic interactions due to the ordered arrangement of metal atoms, thus exhibiting superior electrocatalytic activity and durability. However, quantitatively analyzing the ordering degree of IMC and exploring the correlation between the ordering degree and ORR activity remains extremely challenging. Herein, a series of ternary Pt₂NiCo intermetallic catalysts (o-Pt₂NiCo) with different ordering degree were synthesized by annealing temperature modulation. Among them, the o-Pt …

Performance Of Co2/H2O Co-Electrolysis In A Flat-Tube Solid Oxide Electrolysis Cell Stack Under Air-Free Environment, Xiao-Hui Zhong, Fei Wang, An-Qi Wu, Bei-Bei Han, Jian-Xin Wang, Wan-Bing Guan

Journal of Electrochemistry

This work investigates the transient performance and stability of CO₂/H₂O co-electrolysis in an air-free environment using a flat-tube solid oxide electrolysis cell (SOEC) stack. The results show that the transient behavior of the stack with and without blowing gas in the air electrode is almost the same. With a current density of 0.67 A·cm⁻²@750 °C, the stack operated for over 200 h under co-electrolysis conditions with no air blowing, and the voltage drop rate of the stack was approximately 0.203%/100 hours. Microstructure analysis reveals significant loss of Ni particles and formation of an insulating …

Variation Of Membrane Electrode Assembly Catalyst Layer In Unitized Regenerative Fuel Cell, Yollanda Nurcholifah, Dedi Rohendi, Edy Herianto Majlan, Nirwan Syarif, Addy Rachmat, Dwi Hawa Yulianti, Nyimas Febrika S

Journal of Electrochemistry

A unitized regenerative fuel cell (URFC) is a device that may function reversibly as either a fuel cell (FC) or water electrolysis (WE). An important component of this device is the Membrane electrode assembly (MEA). Therefore, this study aimed to compare the performance outcomes of MEA using electrodes with single and three catalyst layers. This study measured Electrochemical Surface Area (ECSA), Electrochemical Impedance Spectroscopy (EIS), X-ray Diffraction analysis (XRD), and X-ray Fluorescence (XRF). Furthermore, the round-trip efficiency (RTE) of the MEA, as well as the performance in FC and WE mode, was measured. In comparison, The ECSA values of Pt-Ru/C …

Preliminary Assessment Of Non-Volatile Particulate Matter And Gaseous Emissions From A Premixed Pre-Vaporized Combustor Designed For Civil Supersonic Transport, Ugochukwu Ewuzie, Godwin Ifeanyi Ogbuehi, Steven Achterberg, Monday Uchenna Okoronkwo, Philip D. Whitefield

Miners Solving for Tomorrow Research Conference

No abstract provided.