Chemical Engineering Commons^™

Rapid Structural Mapping Of Ternary Metallic Alloy Systems Using The Combinatorial Approach And Cluster Analysis, C. J. Long, Jason R. Hattrick-Simpers, M. Murakami, R. C. Srivastava, I. Takeuchi, V. L. Karen, X. Li

Faculty Publications

We are developing a procedure for the quick identification of structural phases in thin film composition spread experiments which map large fractions of compositional phase diagrams of ternary metallic alloy systems. An in-house scanning x-ray microdiffractometer is used to obtain x-ray spectra from 273 different compositions on a single composition spread library. A cluster analysissoftware is then used to sort the spectra into groups in order to rapidly discover the distribution of phases on the ternary diagram. The most representative pattern of each group is then compared to a database of known structures to identify known phases. Using this method, …

Simulation Of Polarization Curves For Oxygen Reduction Reaction In 0.5 M H2So4 At A Rotating Ring Disk Electrode, Qingbo Dong, Shriram Santhanagopalan, Ralph E. White

Faculty Publications

A cylindrical two-dimensional model based on the Nernst–Planck equations, the Navier–Stokes equation, and the continuity equation is used to simulate the oxygen reduction reaction in 0.5MH₂SO₄ at a rotating ring disk electrode. Concentration distributions and a potential profile are obtained as a function of the axial and radial distances from the center of the electrode surface. Polarization curves are simulated to interpret experimental results by studying various reaction mechanisms, i.e., the four-electron-transfer reduction of oxygen, the two-electron-transfer reduction of oxygen, a combination of the above two reactions, mechanisms with reduction of peroxide to water, and/or the heterogeneous …

Moving Boundary Model For The Discharge Of A Licoo2 Electrode, Qi Zhang, Ralph E. White

Faculty Publications

A moving boundary model in a spherical LiCoO₂ particle is presented to account for the diffusion controlled phase transition in LiCoO₂ solid particles, and this model is incorporated into a porous electrode model for the LiCoO₂ electrode. The simulation results agree well with the experimental data of a LiCoO₂ electrode. A study of the flux distribution in the porous electrode shows that the phase transition phenomenon in the LiCoO₂particles has a significant effect on the flux distribution by changing the solid phase diffusion resistance in the particles.

The Microstructure And Grain Size Of Jet Electroplated Copper Films In Damascene Trench Features, Andrew Tzanavaras, Gregory Young, Stacy H. Gleixner

Faculty Publications

The brightening additive level and dc current density of electroplating baths are two parameters that affect the gap-filling capability and the degree of impurity incorporation in electroplated copper films. Additive incorporation can inhibit grain growth during the room temperature recrystallization process and therefore affect the final grain size. This investigation explores the grain size and microstructure of dc jet-electroplated copper films in 0.35 and 0.50μm Damascene trenches as a function of current density and brightening additive level after first receiving a high-temperature anneal. Unlike a previous study that explored these variables in blanket Cu films [ J. Electrochem. Soc. , …

Intracellular Signaling Networks In The Immune Response: Pathways Activated By Interleukin-2 And-4 Receptors And Their Roles In T Cell Proliferation, Kristen K. Comfort

Chemical and Materials Engineering Faculty Publications

Cells sense and respond to chemical and physical stimuli through signal transduction pathways, which mediate cell proliferation, differentiation, migration, and survival. The cytokines interleukin-2 (IL-2) and interleukin-4 (IL-4) are key regulators of the adaptive immune system, particularly influencing the clonal expansion and differentiation of T cells. At least in culture, both synergistic and antagonistic effects of IL-2 and -4 co-stimulation have been reported; the antagonism, when observed, is thought to arise from the utilization of a common subunit shared by IL-2 and IL-4 receptors. We have sought to characterize IL-2 and IL-4 signaling at the level of intracellular pathways activated …

Control Of Plasma Flux Composition Incident On Tin Films During Reactive Magnetron Sputtering And The Effect On Film Microstructure, Christopher Muratore, Scott G. Walton, Darrin Leonhardt, Richard F. Fernsler

Chemical and Materials Engineering Faculty Publications

A hybrid plasma enhanced physical vapor deposition (PEPVD) system consisting of an unbalanced dc magnetron and a pulsed electron beam-produced plasma was used to deposit reactively sputtered titanium nitride thin films. The system allowed for control of the magnitudes of the ion and neutral flux, in addition to the type of nitrogen ions (atomic or molecular) that comprised the flux. For all deposition experiments, the magnitude of the ion flux incident on the substrate was held constant, but the composition of the total flux was varied. X-ray diffraction and atomic force microscopy showed that crystallographic texture and surface morphology of …

Combinatorial Study Of Ni-Ti-Pt Ternary Metal Gate Electrodes On Hfo2 For The Advanced Gate Stack, K.-S. Chang, M. L. Green, J. Suehle, E. M. Vogel, H. Xiong, Jason R. Hattrick-Simpers, I. Takeuchi, O. Famodu, K. Ohmori, P. Ahmet, T. Chikyow, P. Majhi, B.-H. Lee, M. Gardner

Faculty Publications

The authors have fabricated combinatorial Ni–Ti–Pt ternary metal gate thin film libraries on HfO₂ using magnetron co-sputtering to investigate flatband voltage shift (ΔV_fb) , work function (Φ_m) , and leakage current density (J_L) variations. A more negative ΔV_fb is observed close to the Ti-rich corner than at the Ni- and Pt-rich corners, implying smaller Φ_m near the Ti-rich corners and higher Φ_m near the Ni- and Pt-rich corners. In addition, measured J_L values can be explained consistently with the observed Φ_m variations. Combinatorial methodologies prove to be useful …

Mixing Arrangements For Tanks, Mark F. Reeder, Julian B. Fasano, Gregory T. Benz, Robert R. Corpstein

AFIT Patents

In one aspect, a mixing arrangement is provided for a tank mixing system which includes a tank defined by a side wall, a bottom and a top, the top including at least one opening therethrough. The arrangement includes a non-rotating elongated arm extending through the opening in the top of the tank, the arm pivoted for movement about a pivot axis; an impeller positioned on the arm for movement therewith and within the tank, the impeller moving back and forth along an arcuate path within the tank as the arm pivots back and forth about the pivot axis. In another …

The Grain Size And Microstructure Of Jet-Electroplated Damascene Copper Films, Stacy H. Gleixner, Andrew Tzanavaras, Gregory Young

Faculty Publications

Electroplated damascene copper is rapidly replacing aluminum-copper alloys for on-chip interconnect metallization in advanced ultralarge scale integrated (ULSI) semiconductor devices. In addition to a high degree of (111) crystallographic texture, large defect-free grains are desired to enhance the performance and reliability of copper interconnects in such devices. The brightening additive level and dc current density of electroplating baths are two parameters that affect the process gap-filling capability and the degree of additive incorporation in these copper films. Additive incorporation can inhibit grain growth during the room-temperature recrystallization process and therefore affect the final grain size in electroplated copper films. This …

Use Of Calcium Hypochlorite As A Sanitizer For Seeds Used For Sprouting: Task #2; Impact: Improved Alfalfa Decontamination Technologies, Emily Damron, Carrie Klein, Melissa Leach, Jordan Mourot, Tom Murphy, Amy Seamans, Ryan Wilson

Inquiry: The University of Arkansas Undergraduate Research Journal

Consumption of raw or lightly cooked alfalfa sprouts has been a concern of the U.S. Food and Drug Administration (FDA) in recent years due to connections between sprouts and foodborne illnesses. Researchers have identified, contaminated seeds as the primary source of alfalfa sprouts contamination. Contamination of alfalfa seeds can originate in the field, harvesting, storing, or sprouting. Two pathogens of particular concern on alfalfa seeds are Escherichia coli 0157:H7 (E. coli) and Salmonella. These pathogens are capable of producing biofilms that provide protection for individual cells and allow for survival in otherwise hostile environments, including some disinfectant washes. Other factors …

Data Management And Visualization Of X-Ray Diffraction Spectra From Thin Film Ternary Composition Spreads, I. Takeuchi, C. J. Long, O. O. Famodu, M. Murakami, Jason R. Hattrick-Simpers, G. W. Rubloff, M. Stukowski, K. Rajan

Faculty Publications

We discuss techniques for managing and visualizing x-ray diffraction spectrum data for thin film composition spreads which map large fractions of ternary compositional phase diagrams. An in-house x-ray microdiffractometer is used to obtain spectra from over 500 different compositions on an individual spread. The MATLAB software is used to quickly organize the data and create various plots from which one can quickly grasp different information regarding structural and phase changes across the composition spreads. Such exercises are valuable in rapidly assessing the “overall” picture of the structural evolution across phase diagrams before focusing in on specific composition regions for detailed …

Interphase Exchange Coupling In Fe/Sm-Co Bilayers With Gradient Fe Thickness, Ming-Hui Yu, Jason R. Hattrick-Simpers, Ichiro Takeuchi, Jing Li, Z. L. Wang, J. P. Liu, S. E. Lofland, Somdev Tyagi, J. W. Freeland, D. Giubertoni, M. Bersani, M. Anderle

Faculty Publications

We have fabricated Fe∕Sm–Co bilayers with gradient Fe thicknesses in order to systematically study the dependence of exchange coupling on the thickness of the Fe layer. The Fe layer was deposited at two different temperatures (150 and 300°C) to study the effect of deposition temperature on the exchange coupling. Magneto-optical Kerr effect and x-ray magnetic circular dichroism (XMCD) have been employed as nondestructive rapid characterization tools to map the magnetic properties of the gradient samples. Systematic enhancement in exchange coupling between the soft layer and the hard layer is observed as the soft layer thickness is decreased. Separate exchange couplings …

Etching With Electron Beam Generated Plasmas, D. Leonhardt, Scott G. Walton, Christopher Muratore, Richard F. Fernsler, R. A. Meger

Chemical and Materials Engineering Faculty Publications

A modulated electron beam generated plasma has been used to dry etch standard photoresist materials and silicon. Oxygen–argon mixtures were used to etch organic resist material and sulfur hexafluoride mixed with argon or oxygen was used for the silicon etching. Etch rates and anisotropy were determined with respect to gas compositions, incident ion energy (from an applied rf bias) and plasma duty factor. For 1818 negative resist and i-line resists the removal rate increased nearly linearly with ion energy (up to 220 nm/min at 100 eV), with reasonable anisotropic pattern transfer above 50 eV. Little change in etch rate was …

Effect Of Plasma Flux Composition On The Nitriding Rate Of Stainless Steel, Christopher Muratore, Scott G. Walton, D. Leonhardt, Richard F. Fernsler, David D. Blackwell, R. A. Meger

Chemical and Materials Engineering Faculty Publications

The total ion flux and nitriding rate for stainless steel specimens exposed to a modulated electron beam generated argon-nitrogen plasma were measured as a function of distance from the electron beam axis. The total ion flux decreased linearly with distance, but the nitriding rate increased under certain conditions, contrary to other ion flux/nitriding rate comparisons published in the literature. Variation in ion flux composition with distance was explored with a mass spectrometer and energy analyzer as a possible explanation for the anomalous nitriding rate response to ion flux magnitude. A transition in ion flux composition from mostly N2 1 to …

Multimode Quantitative Scanning Microwave Microscopy Of In Situ Grown Epitaxial Ba1-XSrXTio3 Composition Spreads, K. S. Chang, M. Aronova, O. Famodu, I. Takeuchi, S. E. Lofland, Jason R. Hattrick-Simpers, H. Chang

Faculty Publications

We have performed variable-temperature multimode quantitative microwavemicroscopy of in situepitaxial Ba_1−xSr_xTiO₃ thin-film composition spreads fabricated on (100) LaA₁O₃ substrates. Dielectric properties were mapped as a function of continuously varying composition from BaTiO₃ to SrTiO₃. We have demonstrated nondestructive temperature-dependent dielectric characterization of local thin-film regions. Measurements are simultaneously taken at multiple resonant frequencies of the microscope cavity. The multimode measurements allow frequency dispersion studies. We observe strong composition-dependent dielectric relaxation in Ba_1−xSr_xTiO₃ at microwave frequencies.

Development Of A Curved Layer Lom Process For Monolithic Ceramics And Ceramic Matrix Composites, Donald A. Klosterman, Richard P. Chartoff, Nora R. Osborne, George A. Graves, Allan Lightman, Gyoowan Han, Akos Bezewredi, Stan Rodrigues, Sung Pak, Gary Kalmanovich, Leon Dodin, Song Tu

Chemical and Materials Engineering Faculty Publications

A novel rapid prototyping technology incorporating a curved layer building style was developed. The new process, based on Laminated Object Manufacturing (LOM), was designed for efficient fabrication of curved layer structures made from ceramics and fiber reinforced composites. A new LOM machine was created, referred to as Curved Layer LOM. This new machine uses ceramic tapes and fiber prepregs as feedstocks and fabricates curved structures on a curved-layer by curved-layer basis. The output of the process is a three dimensional "green" ceramic that is capable of being processed to a seamless, fully dense ceramic using traditional techniques. A detailed description …

Derivation Of An Analytical Model To Calculate Junction Depth In Hgcdte Photodiodes, Stacy H. Gleixner, H. G. Robinson, C. R. Helms

Faculty Publications

Presents an enhanced analytical model to calculate junction depth and Hg interstitial profile during n-on-p junction formation in HgCdTe photodiodes. Detailed information on the enhanced model; Function of the model; Information on HgCdTe; Detailed information on how the model was obtained.

Fuel Cells, Frederick J. Munster Jr.

Maine Collection

Fuel Cells

by Frederick J. Munster Jr.

Edited by: Mr. Christopher Carroll

Maine Department of Economic Development, Augusta, Maine, 1998.

Contents: Hydrogen / Hydrogen Safety / Electrolysis / Electrolyzers / History of Fuel Cells / How Fuel Cells Operate / Fuel Cell Types / Fuel Cell Electrochemistry / Power Systems / Fuel Cells in Transportation / Hydrogen Powered Internal Combustion Engines / Home, Garden, Education and Industry / For More Information / Glossary / References

Mathematical Modeling Of Proton‐Exchange‐Membrane Fuel‐Cell Stacks, Dhanwa Thirumalai, Ralph E. White

Faculty Publications

No abstract provided.

Galvanostatic Pulse And Pulse Reverse Plating Of Zinc–Nickel Alloys From Sulfate Electrolytes On A Rotating Disc Electrode, Branko Popov, M. Ramasubramanian, S. N. Popova, Ralph E. White, Ken-Ming Yin

Faculty Publications

Galvanostatic pulse and pulse reverse techniques have been used to study the plating of zinc–nickel alloys in the presence of nonyl phenyl polyethylene oxide. The effects of average current density, rotation speed of disc electrode and the presence of nonyl phenyl polyethylene oxide in the electrolyte on deposition of zinc–nickel alloys were evaluated. Zinc–nickel plating bath solution chemistry was studied by determining the equilibrium concentrations at various pH levels. It was found that the alloy composition was determined by solution equilibria, mass transfer of the electroactive species within the diffusion layer and by the surface coverage of nonyl phenyl polyethylene …

Galvanostatic Pulse And Pulse Reverse Plating Of Zinc-Nickel Alloys From Sulfate Electrolytes On A Rotating Disc Electrode, Branko N Popov, M. Ramasubramanian, S. N. Popova, Ralph E. White, K-M. Yin

Faculty Publications

Galvanostatic pulse and pulse reverse techniques have been used to study the plating of zinc–nickel alloys in the presence of nonyl phenyl polyethylene oxide. The effects of average current density, rotation speed of disc electrode and the presence of nonyl phenyl polyethylene oxide in the electrolyte on deposition of zinc–nickel alloys were evaluated. Zinc–nickel plating bath solution chemistry was studied by determining the equilibrium concentrations at various pH levels. It was found that the alloy composition was determined by solution equilibria, mass transfer of the electroactive species within the diffusion layer and by the surface coverage of nonyl phenyl polyethylene …

Low Cost Schottky Barrier Solar Cells Fabricated On Cdse And Sb2S3 Films Chemically Deposited With Silicotungstic Acid, O. Savadogo, K. C. Mandal

Faculty Publications

No abstract provided.

An Analysis Of A Back Fed Porous Electorde For The Br2/Br- Redox Reaction, John W. Van Zee, Ralph E. White

Faculty Publications

No abstract provided.

Parallel Plate Electrochemical Reactor Model, Ralph E. White, Mike Bain, Mike Raible

Faculty Publications

No abstract provided.

The Fluid Motion Due To A Rotating Disk, Ralph E. White, Charles M. Mohr Jr, John Newman

Faculty Publications

No abstract provided.

Scattering Of Argon And Neon From W(112), Ralph E. White, Jean Jacques Ehrhardt, Robert P. Merrill

Faculty Publications

No abstract provided.

A Study Of The Flow Characteristics In The Core Region Of The Sandia Engineering Reactor, James A. Moeller

Chemical and Biological Engineering ETDs

The core region of a nuclear rector is an extremely compact area with a capability of providing a very high heat output. Regardless of the type of coolant used, the heat transfer characteristics of this region must be adequately designed to prevent any undesirable "hot-spots" from developing. The Sandia Engineering Reactor has one of the most compact cores of any in currently operating nuclear reactors. For this reason it is necessary to investigate fully the heat transfer characteristics of the core. The rate of heat transfer from the fuel elements to the coolant is directly dependent upon the temperature difference …