Chemical Engineering Commons^™

The Oxidation Of Hydrogen Peroxide On Nanostructured Rhodium Microelectrodes, N. Bartlett Philip, F. Esterle Thomas

Journal of Electrochemistry

Mesoporous Rh films were deposited onto platinum microelectrodes from the H₁ lyotropic liquid crystalline phase of C₁₂EO₈ (octaethyleneglycol monododecyl ether). The electrodes show well defined voltammetry for the oxidation and the reduction of hydrogen peroxide at low concentrations (<10 mmol•L-1) with excellent stability for operation at neutral pH. Based on the hysteresis in the current and the potential dependence the oxidation of hydrogen peroxide occurs through a CEE mechanism involving Rh(OH)₃ on the mesoporous Rh electrode surface. At higher hydrogen peroxide concentrations the current reaches a plateau that is due to either saturation of the binding sites for hydrogen peroxide or limitation of the reaction due to acidification of the solution within the pores. For the thin films (below 200 nm) the hydrogen peroxide calibration curves we …

Incorporation Of Catalytic Dehydrogenation Into Fischer-Tropsch Synthesis To Lower Carbon Dioxide Emissions, Gerald P. Huffman

Chemical and Materials Engineering Faculty Patents

A method for producing liquid fuels includes the steps of gasifying a starting material selected from a group consisting of coal, biomass, carbon nanotubes and mixtures thereof to produce a syngas, subjecting that syngas to Fischer-Tropsch synthesis (FTS) to produce a hyrdrocarbon product stream, separating that hydrocarbon product stream into C1-C4 hydrocarbons and C5+ hydrocarbons to be used as liquid fuels and subjecting the C1-C4 hydrocarbons to catalytic dehydrogenation (CDH) to produce hydrogen and carbon nanotubes. The hydrogen produced by CDH is recycled to be mixed with the syngas incident to the FTS reactor in order to raise the hydrogen …

Electrocatalytic Activities Of Mb/Aunps/Mwnts/Gc Electrode For Hydrogen Peroxide Reduction, Zheng-Juan Huang, Hua-Ping Peng, Dai-Jun Cha, Ai-Lin Liu, Wei Chen, Xin-Hua Lin, Yong-Ji You

Journal of Electrochemistry

A novel matrix, multiwalled carbon nanotubes supported Au nanoparticles composite nanomaterial (AuNPs/MWNTs), for immobilization of protein and biosensing was designed using a simple and effective one-step in situ synthesis route. Using myoglobin (Mb) as a model, the direct electrochemistry of the immobilized proteins on the AuNPs/MWNTs composite was studied. The results showed that the AuNPs/MWNTs composite can maintain the bioactivity and facilitate the direct electrochemistry of Mb in the Mb/AuNPs/MWNTs/GC electrode. Based on the direct electron transfer of the immobilized Mb, the protein electrode exhibited excellent electrocatalytic activity to the reduction of H₂O₂ with a linear range …

Synthesis And Electrochemical Properties Of High-Capacity Cathode Material 0.08lico0.75Al0.25O2-0.92linio2, Ru-Ying Wang, Tian Qiu, Chong Mao, Wen-Sheng Yang

Journal of Electrochemistry

CoAl-LDH or Co(OH)₂ coated spherical Ni(OH)₂ precursors were obtained via a co-precipitation method at a constant pH. The mixtures of the precursors and LiOH·H₂O were annealed at high temperature in O₂ atmosphere, and then the cathode materials of 0.08LiCo_0.75Al_0.25O₂-0.92LiNiO₂, 0.08LiCoO₂-0.92LiNiO₂ and LiNiO₂ were synthesized. Effects of the coating layer were also studied. The results showed that the 0.08LiCo_0.75Al_0.25O₂-0.92LiNiO₂ material possessed the best rate and cycle life performance. The discharging capacities at 0.1C, 0.5C and 3C were …

Synthesis And Electrochemical Characterization Of Li3V2(Po4)3/C Cathode Material By Ball-Milling Assisted Microwave Method, Zhi-Yuan Tang, Wen-Feng Mao, Ji Yan, Wei Yuan, Xin-He Zhang

Journal of Electrochemistry

The cathode materials of Li₃V₂(PO₄)₃/C were successfully synthesized by ball-milling assisted microwave method and the microwave irradiation time was also optimized. It is found that the Li₃V₂(PO₄)₃/C material obtained at a microwave power of 640 W for 18 min showed the best electrochemical performance with the initial reversible capacity of 101.3 mAh·g^-1 and the remained 100.8 mAh·g^-1 at 5C rate after 300 cycles. This excellent electrochemical capability may be resulted from good crystallinity, smaller and uniform particle size of the material, showing …

Electrochemical Performances Of Layered Polypyrrole/Chemically Reduced Graphene Oxide Nanocomposites As Supercapacitor Electrodes, Si-Zhe Xu, Xue-Jiao Zhou, Kun Wu, Yong-Qiang Yang, Hai-Xia Wu

Journal of Electrochemistry

Nanocomposites of polypyrrole (Ppy) and chemically reduced graphene oxide (CRGO), Ppy/CRGO, have been fabricated through in-situ polymerization of pyrrole on graphene oxide (GO) sheets. The as-synthesized Ppy/CRGO composites were characterized complementarily using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and Fourier transformed infrared spectroscopy (FT-IR). By controlling the initial ratio of the GO to pyrrole, the layered composites could be obtained and their thickness could be tuned properly. The Ppy/CRGO electrodes were prepared using a mechanical compressing technique and their electrical conductivity and electrochemical properties were characterized systematically. We demonstrated that as electrodes for supercapacitor, the Ppy/CRGO composites with Ppy …

Fabrication And Characterization Of Thermomechanically Processed Sulfur And Boron Doped Amorphous Carbon Films, Lonnie Carlson

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Small scale, high power density, reliable, and long-life power supplies would be useful or even critical for space missions or the growing number of microdetectors, microsensors, and miniature vehicles. Alpha or beta particle voltaic devices could satisfy these requirements but have been shown to degrade quickly due to radiation damage. Amorphous carbon (a-C) PN junctions or PIN devices could provide radiation hardness and sufficiently high efficiency. As the range of alpha and beta particles in a-C is ~20-120μm, much thicker films than are typical are needed to maximize collection of the particle energy.

In this work, the fabrication of thermomechanically …

An Overview Of Electrode Materials In Microbial Fuel Cells, Su-Qin Ci, Na Wu, Zhen-Hai Wen, Jing-Hong Li

Journal of Electrochemistry

Microbial fuel cells (MFCs) are devices that can directly convert organic chemical energy into electrical energy with microbial as catalysts. MFCs are a promising bio-electrochemical system with the potential to degrade organic sewage and produce electricity. This article supplies a critical and comprehensive review for the electrode materials concerning about anode and cathode in MFCs, including the fabrications, functional modifications and surface constructions of electrode materials, as well as their applications in MFCs. Additionally, the existing problems of electrode materials in current MFCs have been demonstrated in order to provide the guideline for exploring the next-generation electrode materials for MFCs.

The Electrocatalytic Performance Of Pd Catalysts Supported On Pvp Modified Mwcnts For Formic Acid Oxidation, Jing Zhang, Xiao Zhao, Chang-Peng Liu, Wei Xing

Journal of Electrochemistry

In this paper the MWCNTs were modified by Poly (N-vinyl-2-pyrrolidone) (PVP) to support Pd nanoparticles, which were used as the catalyst for formic acid electrooxidation. And the performance of Pd/PVP-MWCNTs catalysts was studied by electrochemical measurements. The observations from Fourier transforms infrared spectrometer (FTIR) and transmission electron microscopy (TEM) illustrated that the Pd nanoparticles with a small size and narrow size distribution were highly dispersed on PVP-MWCNT support. Therefore, the Pd/PVP-MWCNTs catalysts showed excellent catalytic activity for formic acid electrooxidation.

Methodological Significance Of "Property-Activity Relationship" For Catalyst Studies, Jun-Tao Lu, Li Xiao, De-Li Wang, Yu-Bao Sun, Yan-Ge Suo, Lin Zhuang

Journal of Electrochemistry

Instead of attempting the structure-activity relationship (SAR), which is commonly regarded as the core problem for catalyst studies, this paper highlights the methodological significance of “property-activity relationship (PAR)”. The “property” here refers to an index （such as the adsorption energy of an intermediate） or a group of indexes reflecting the behavior of a catalyst which interacts with reactants or intermediates, and is a bridge between structure and activity. Because property is related to activity more directly than structure to activity, PAR should be simpler, less difficult and, therefore, more feasible to be accessed than SAR. Once the key property is …

Synthesis Of Spherical Ni3S4 By Solvothermal Method As Supercapacitor Electrodes, Qing-Na Huan, Li-Fang Jiao, Qing-Hong Wang, Hong-Mei Du, Jia-Qin Yang, Wen-Xiu Peng, Yi-Jing Wang, Hua-Tang Yuan

Journal of Electrochemistry

The Ni₃S₄ microspheres have been synthesized via a facile solvothermal method. The crystal structure and surface morphology are characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Microspherical Ni₃S₄ exhibits good electrochemical capacitance validated by electrochemical measurements. The specific capacities of 1120.6 F∙g^-1 at 0.5 A∙g^-1 and 433.4 F∙g^-1 at 4 A∙g^-1 with the capacitance retention of 89.37 % and 84.88 % were obtained after 1000 cycles, respectively. The electrochemical reaction is expected due to the transformation of Ni(OH)₂ and NiOOH based on the XRD, XPS and CV …

Novel Platform Development Using An Assembly Of Carbon Nanotube, Nanogold And Immobilized Rna Capture Element Towards Rapid, Selective Sensing Of Bacteria, Elizabeth I. Maurer, Kristen K. Comfort, Saber M. Hussain, John J. Schlager, Sharmila M. Mukhopadhyay

Chemical and Materials Engineering Faculty Publications

This study examines the creation of a nano-featured biosensor platform designed for the rapid and selective detection of the bacterium Escherichia coli. The foundation of this sensor is carbon nanotubes decorated with gold nanoparticles that are modified with a specific, surface adherent ribonucleic acid (RNA) sequence element. The multi-step sensor assembly was accomplished by growing carbon nanotubes on a graphite substrate, the direct synthesis of gold nanoparticles on the nanotube surface, and the attachment of thiolated RNA to the bound nanoparticles.

The application of the compounded nanomaterials for sensor development has the distinct advantage of retaining the electrical behavior …

Synthesis Of Lini0.5Co0.2Mn0.3O2 For Lithium Ion Batteries And The Mechanism Of Capacity Fading At High Temperature, Wen Liu, Miao Wang, Ji-Tao Chen, Xin-Xiang Zhang, Heng-Hui Zhou

Journal of Electrochemistry

The Ni-rich cathode materials, LiNi_0.5Co_0.2Mn_0.3O₂, have been synthesized by Co-precipitation and high-temperature solid-phase sintering method. Constant current charge-discharge tests showed high discharge capacity of 179.2 mAh·g^-1 in the 3.0~4.4 V at 0.2C. However, at 55 °C the LiNi_0.5Co_0.2Mn_0.3O₂ experienced the dramatic capacity fading after 100 charge-discharge cycles. Electrochemical Impedance Spectroscopy, X-Ray Photoelectron Spectroscopy, Atomic Emission Spectroscopy have been employed to study the capacity fading mechanism of LiNi_0.5Co_0.2Mn_0.3O₂ cycled at high temperature in range of high-voltage charge and …

Synthesis And Electrochemical Properties Of Lifeso4F/Graphene Composite As Cathode Material For Lithium-Ion Batteries, Wei Guo, Ya-Xia Yin, Li-Jun Wan, Yu-Guo Guo

Journal of Electrochemistry

The LiFeSO₄F was successfully synthesized from the reactions of FeSO₄∙xH₂O (x=1, 4, 7) with LiF in tetraethylene glycol media through a facile low temperature method. The structures and microscopic features of the products were characterized by XRD, SEM and TEM. TGA result shows the good thermal stability of the as-prepared LiFeSO₄F. No diffraction peaks of the FeSO₄ are observed in the as-prepared products with the starting material of either FeSO₄∙4H₂O or FeSO₄∙7H₂O, which should be ascribed to delaying the release of H_{2 …}

Template-Free Synthesis Of Porous Nio Hierarchical Structure For High Performance Supercapacitors, Yun Huang, Zhong Wu, Xin-Bo Zhang

Journal of Electrochemistry

A facile and template-free hydrothermal method is proposed to successfully synthesize porous NiO hierarchical structure, which is found to be assembled from ultrathin NiO nanosheets. As for electrochemical pseudocapacitor application, the obtained material exhibits not only high specific capacitances of 435 F·g^-1 at 20 mV·s^-1 and 367 F·g^-1 at 10 A·g^-1, but also holds a good electrochemical stability over 1000 cycles at a current rate of 20 mV·s^-1. These results suggest that the hierarchical structured porous NiO is a promising supercapacitor electrode material.

Electrochemical Properties Of The Keggin-Type Lacunary Heteropolysilicate Anion And Its Eectrocatalysis For H2O2 Reduction, Xi-Long Liu, Chun-Yan Wu, Fang Zhou, Hong-Sheng Liu, Ying-Jie Hua, Chong-Tai Wang, Xiao-Yang Liu

Journal of Electrochemistry

Electrochemical properties of the Keggin-type lacunary heteropolysilicate anion SiW₁₁O₃₉^8- (SiW₁₁) and its indirect electrocatalysis for H₂O₂ reduction in the supporting electrolyte containing 0.1 mol·L^-1 NaHSO₄ and Na₂SO₄ solutions were investigated using cyclic voltammetry, square wave voltammetry and alternating current impedance spectroscopy. Experimental results indicated that SiW₁₁ showed two pairs of reversible redox waves on the glassy carbon (GC) electrode in an acidic solution. The electron transfer number corresponding to the two pairs of waves was one, and the proton transfer number involved was two during …

Electrocatalytic Oxidation Of Ethanol On Ni-P-Tio2 Composite Coating Electrodes, Guang-Hui Hu, Hai-Xia Zeng, Zhi-Gang Wei, Zhan-Chang Pan, Shu-Guang Xie, Yan-Di Zou

Journal of Electrochemistry

The Ni-P-TiO₂ composite coating electrodes with different contents of TiO₂ particulates were prepared by electroless plating technique from Ni-P plating bath containing TiO₂ powders on brass. Cyclic voltammetry, linear sweep voltammetry (LSV), chronoamperometry and electrochemical impedance spectroscopy (EIS) were used to test the electrochemical performance of Ni-P-TiO₂/Cu electrodes. It was indicated that the Ni-P-TiO₂/Cu electrodes exhibited very strong electrocatalytic activity toward the oxidation of ethanol in alkaline medium at ambient temperature. The electrocatalytic activity of ethanol oxidation on the Ni-P-TiO₂ electrodes depended on the amounts of TiO₂ in the coatings. The …

Synthesis And Electrochemical Properties Of Yttrium-Doped Lini0.49Mn1.49Y0.02O4, Xian-Wen Zhang, Zheng-Xi Zhang, Li Yang, Shao-Hua Fang, Long Qu

Journal of Electrochemistry

The LiNi_0.49Mn_1.49Y_0.02O₄ cathode material was synthesized using the citric acid-assisted sol-gel method by partial substitutions of Ni and Mn with Y in the LiNi_0.5Mn_1.5O₄ material. The influences of Y doping on the structure and electrochemical properties were investigated by means of X-ray diffraction, cyclic voltammetry, galvanostatic charge/discharge tests and AC impedance spectroscopy. The results showed that the introduction of Y into the LiNi_0.5Mn_1.5O₄ greatly improved the cycle performance and rate capability. When the charge and discharge current was 1 C in the potential …

Electrochemical Preparation Of Nanostructural Pt-Ni And Pd-Ni Films For Ethanol Electro-Oxidation, Chen-Zhong Yao, Hui-Xuan Ma, Bo-Hui Wei

Journal of Electrochemistry

The Pt-Ni and Pd-Ni films were successfully prepared on Ti substrates by electrodeposition method. The porous Pt-Ni nanoflakes appeared to be uniform with the thickness of the slices about 10 ~ 20 nm. The porous Pd-Ni nanoparticles with a flower shape appeared to be uniform with the diameters of 50 ~ 60 nm. The XRD patterns also indicated that the Pd-Ni and Pt-Ni nanostructures have the poor crystallinity. The onset potentials of ethanol oxidation were negatively shifted to –0.74 V on Pt-Ni electrodes and –0.71 V on Pd-Ni electrodes, respectively. Addition of Ni could enhance catalytic activities and antitoxic properties …

Ethanol Electrooxidation On Pt/Mo2/Cnts Catalysts, Yu-Long Cheng, Jie Sun, Ji-Gang Li, Li-Gong Zhang, Tian Zhou, Geng Chang, Zhong-Chao Dong

Journal of Electrochemistry

The ethanol electrooxidation behaviors on Pt/MO₂/CNTs（M=Sn, Ti, Ce）and Pt/CNTs catalysts in H₂SO₄ solutions were researched by cyclic voltammetry. It has revealed that the catalysts with the addition of metal oxides presented higher electrooxidation activity for ethanol, in particular, the Pt/CeO₂/CNTs catalyst showed the best activity for ethanol electrooxidation intermediate. The Pt/SnO₂/CNTs catalyst demonstrated the best ethanol electrooxidation activity when considering the synthetic effects of such parameters as the onset oxidation potential, peak current densities and total oxidation area.

Catalytic Activities Of Electrochemically Dealloyed Pt(Pd)-Cu Catalysts For Oxygen Reduction Reaction, Rui-Zhi Yang, Strasser Peter, Toney Michael

Journal of Electrochemistry

The electrochemically dealloyed Pt(Pd)-Cu catalysts were prepared by electrochemical dealloying of Cu₃Pt(Pd) and their catalytic activities toward oxygen reduction reaction (ORR) were studied in 0.1 mol·L^-1 HClO₄ . solutions. The structural features of the dealloyed Pt(Pd)-Cu were revealed by synchrotron-based anomalous X-ray diffraction (AXRD) and surface X-ray scattering (SXS) at an atomic scale. We established a relationship between the structure and the catalytic activity by comparing the ORR activity and the structure of dealloyed Cu₃Pt nanoparticles with similarly dealloyed Cu₃Pt thin films and Cu₃Pt(111). The enhancement in the activity of …

Electrochemical Reduction Of Co2 On Sn/Cu Electrodes, Chen-Chen Zhao, Jian-Wei Guo, Li Wang, Xiang-Ming He, Cheng Wang, Zhi-Xiang Liu

Journal of Electrochemistry

The Sn/Cu electrodes were prepared by electroplating method and their morphologies under different galvanization current densities were determined by SEM. In alkali, the effects of Sn/Cu electrodes on the activities towards hydrogen evolution and electrochemical reduction of CO₂ were investigated in alkaline solutions using a three-electrode system. These results indicated that the Sn/Cu electrodes prepared at 10 mA/cm² and 15 mA/cm² showed good activities, while that prepared at 15 mA/cm² was even better in activities. The synergetic structure of the Sn/Cu electrode to be beneficial to electrochemical reduction of CO₂ has been pointed out.

Tolerance Limit For Trucks With Excess Load In Transport Regulation In Indonesia, Sigit Pranowo Hadiwardoyo, Raden Jachrizal Sumabrata, Mohammed Ali Berawi

Makara Journal of Technology

Reliability of a road is mandatory since damaged will impede the traffic. Destruction is caused by various factors; one of the most important factors is excess load. Overload may give the load of each axle of a vehicle exceeds the determined standard. This condition occurs in trucks exceeding the load limit. In designing the structure of a road based on the method of Directorate General of Highways Ministry of Public Works of the Republic of Indonesia, axle load calculated in equivalent-number, or known as equivalent axle load (EAL), of 8.16 tons of standard axle. Total equivalent-number over the service life …

Earthquake Damage Intensity Relationship For Residential Houses In West Sumatra, Febrin Anas Ismail, Abdul Hakam, Fauzan Fauzan

Makara Journal of Technology

The Sumatra 30 September 2009 earthquake has damaged hundred thousand buildings in West Sumatra Province. The earthquake is located in 100 km offshore of Padang City, the Capital City of the province. Survey has been conducted to assess the damage of the building in few days after the earthquake. In this survey, the damage of buildings are categorised into 3 level that are heavily, moderate and slightly damages. This paper explores the level damage of building and then the intensity of the shaking in the affected area. Then based on the coordinate of every building location, the buildings are scattered …

Evaluation Of Universitas Indonesia’S Recharge Pond Performance And Potential Utilization For Raw Water Source, Nyoman Suwartha, Resky Agaslian Pramadin

Makara Journal of Technology

Evaluasi Kinerja Waduk Resapan UI dan Potensi Pemanfaatannya sebagai Sumber Air Baku. Waduk resapan Universitas Indonesia (UI) telah dibangun sejak 5 tahun yang lalu. Namun kegiatan monitoring dan evaluasinya sangat minim dilakukan. Tujuan dari studi ini adalah untuk mengetahui laju resapan, dan untuk mengevaluasi kondisi kuantitas dan kualitas air waduk resapan selama musim kemarau dan penghujan. Pengukuran kedalaman muka air, intensitas curah hujan dan penguapan dilakukan untuk menentukan ketersediaan air, laju resapan, dan imbangan air waduk. Sejumlah air permukaan diambil dari waduk resapan dan sungai di tiga titik sampling untuk mengetahui kondisi kualitas air eksisting. Hasil studi menunjukkan tidak ada …

Effect Of Methanol Induction And Incubation Time On Expression Of Human Erythropoietin In Methylotropic Yeast Pichia Pastoris, Adi Santoso, Neng Herawati, Yana Rubiana

Makara Journal of Technology

Erythropoietin (EPO) is a glycoprotein hormone consists of 165 amino acids and has molecular mass of 30,400 Daltons. The large quantities of these hormone required to satisfy clinical demand are currently met by recombinant expression in mammalian cell, namely chinese hamster ovary (CHO). Pichia pastoris has become popular yeast based protein production systems to substitute mammalian expression systems. P. pastoris is capable to use methanol as sole carbon and energy source. In this study, recombinant human EPO (rhEPO) protein obtained by expressing the hEPO gene in methylotropic yeast P. pastoris, strain X33. The present work was carried out to study …

Fuel Saving Strategy In Spark Ignition Engine Using Fuzzy Logic Engine Torque Control, Aris Triwiyatno, Sumardi Sumardi

Makara Journal of Technology

In the case of injection gasoline engine, or better known as spark ignition engines, an effort to improve engine performance as well as to reduce fuel consumption is a fairly complex problem. Generally, engine performance improvement efforts will lead to increase in fuel consumption. However, this problem can be solved by implementing engine torque control based on intelligent regulation such as the fuzzy logic inference system. In this study, fuzzy logic engine torque regulation is used to control the throttle position entered by the driver to achieve optimal engine torque. An engine torque vs. throttle position and engine speed mapping …

An Agri-Food Supply Chain Model To Enhance The Business Skills Of Small-Scale Farmers Using Corporate Social Responsibility, Wahyudi Sutopo, Muh. Hisjam, Yuniaristanto Yuniaristanto

Makara Journal of Technology

In general, small-scale vegetable farmers experience problems in improving the safety and quality of vegetables for supplying high-class consumers in modern retailers. Farmer Group and/or Cooperative (FGC) should be able to assist its members to meet the relevant provisions of modern retail on product specifications, delivery terms, and internal business requirements. This study proposed an agri-food supply chain (ASC) model that involves the corporate social responsibility (CSR) activities to enhance the business skills of the FGC as supplier of modern retailer. Multi-objective optimization programming is developed to determine the amount and timing of supply, level of farmers training skills, quality …

Corrosion Rate Of Carbon Steel For Flowline And Pipeline As Transmission Pipe In Natural Gas Production With Co2 Content, Andi Rustandi, Muhammad Adyutatama, Enriko Fadly, Norman Subekti

Makara Journal of Technology

The purpose of this research is to investigate the corrosion rate of carbon steel as flowline and pipeline in natural gas production with CO2 content. The influence of variety of conditions that represent the actual conditions in practice such as CO2 partial pressure and solution composition, particularly NaCl percentage were performed. Research conducted by polarization test and simulation methods using PREDICTTM software. The result of this research is used to illustrate the level of corrosion rate of typical carbon steel i.e. API 5L X-52 occurred in natural gas pipelines due to the effect of dissolved CO2. From the experiments obtained …

Modification Of Flow Structure Over A Van Model By Suction Flow Control To Reduce Aerodynamics Drag, Harinaldi Harinaldi, Budiarso Budiarso, Warjito Warjito, Engkos Achmad Kosasih, Rustan Tarakka, Sabar Pangihutan Simanungkalit, I Gusti Made Fredy Lay Teryanto

Makara Journal of Technology

Automobile aerodynamic studies are typically undertaken to improve safety and increase fuel efficiency as well as to find new innovation in automobile technology to deal with the problem of energy crisis and global warming. Some car companies have the objective to develop control solutions that enable to reduce the aerodynamic drag of vehicle and significant modification progress is still possible by reducing the mass, rolling friction or aerodynamic drag. Some flow control method provides the possibility to modify the flow separation to reduce the development of the swirling structures around the vehicle. In this study, a family van is modeled …