Open Access. Powered by Scholars. Published by Universities.®

Chemical Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Electrical and Computer Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 1441 - 1470 of 1824

Full-Text Articles in Chemical Engineering

The Synthesis, Structure And Electrochemical Performances Of Lithium Iron Phosphate, Hui Xie, Zhen-Tao Zhou Nov 2006

The Synthesis, Structure And Electrochemical Performances Of Lithium Iron Phosphate, Hui Xie, Zhen-Tao Zhou

Journal of Electrochemistry

The lithium iron phosphate cathode materials were synthesized by solid-state reaction combined high-rate ball milling under the temperature ranging from 400 ℃ to 700 ℃.The crystalline structure, morphology of particles, and electrochemical performance of the sample were investigated by X-ray diffraction, scanning electron microscopy and charge-discharge test. The results showed that the sintering temperature had great influences on the crystal structure, morphology and electrochemical performances of LiFePO4. The sample synthesized under 600℃ showed the best charge-discharge performances with the first specific discharge capacity of(128.8) mAh/g and the 15th specific discharge capacity of 129.1 mAh/g at 0.1C rate, …

Go to article

Structure And Electrochemical Characteristics Of Lifepo4 Prepared By The Polyacrylates-Pyrolysis-Reduction Method For Li-Ion Batteries, Li-Hong Yu, Yu-Liang Cao, Xiao-Fei Zhang, Han-Xi Yang, Xin-Ping Ai Nov 2006

Structure And Electrochemical Characteristics Of Lifepo4 Prepared By The Polyacrylates-Pyrolysis-Reduction Method For Li-Ion Batteries, Li-Hong Yu, Yu-Liang Cao, Xiao-Fei Zhang, Han-Xi Yang, Xin-Ping Ai

Journal of Electrochemistry

The cathode material of olivine LiFePO4 was prepared by a novel method of polyacrylate-pyrolysis-reduction.XRD demonstrates that the material have the olivine structure.SEM photo shows an average particle-size of about 100 nm with a well distribution.Electrochemical test of cycling at a constant current reveals the discharge capacity of 138 mAh/g and a good cycling stability.It is a novel practicable technology to prepare LiFePO4 by using polyacrylate-pyrolysis-reduction method.

Go to article

Biogasoline Production From Palm Oil Via Catalytic Hydrocracking Over Gamma-Alumina Catalyst, Anondho Wijanarko, Dadi Ahmad Mawardi, Mohammad Nasikin Nov 2006

Biogasoline Production From Palm Oil Via Catalytic Hydrocracking Over Gamma-Alumina Catalyst, Anondho Wijanarko, Dadi Ahmad Mawardi, Mohammad Nasikin

Makara Journal of Technology

Biogasoline Production from Palm Oil Via Catalytic Hydrocracking over Gamma-Alumina Catalyst. Bio gasoline conversion from palm oil is an alternative energy resources method which can be substituted fossil fuel base energy utilization. Previous research resulted that palm oil can be converted into hydrocarbon by catalytic cracking reaction with γ-alumina catalyst. In this research, catalytic cracking reaction of palm oil by γ-alumina catalyst is done in a stirrer batch reactor with the oil/catalyst weight ratio variation of 100:1, 75:1, and 50:1; at suhue variation of 260 to 340oC and reaction time variation of 1 to 2 hour. Post cracking reaction, bio …

Go to article

A Study On Parallel Computation Tools On Networked Pcs, Heru Suhartanto Nov 2006

A Study On Parallel Computation Tools On Networked Pcs, Heru Suhartanto

Makara Journal of Technology

A Study on Parallel Computation Tools on Networked PCs. Many models for natural phenomena, engineering applications and industries need powerfull computing resources to solve their problems. High Performance Computing resources were introduced by many researchers. This comes in the form of Supercomputers and with operating systems and tools for development such as parallel compiler and its library. However, these resources are expensive for the investation and maintenance, hence people need some alternatives. Many people then introduced parallel distributed computing by using available computing resource such as PCs. Each of these PCs is treated as a processors, hence the cluster of …

Go to article

Crude Oil Sludge Degradation In Microcosmic Scale: Simple Simulation As Preliminary Study On Land Treatment Bioremediation., Astri Nugroho Nov 2006

Crude Oil Sludge Degradation In Microcosmic Scale: Simple Simulation As Preliminary Study On Land Treatment Bioremediation., Astri Nugroho

Makara Journal of Technology

Crude Oil Sludge Degradation in Microcosmic Scale: Simple Simulation as Preliminary Study on Land Treatment Bioremediation. A study in microcosmic condition has been carried out to evaluate the bacterial hydrocarbonoclastic capability in increasing the oil sludge degradation being mixed with NPK fertilizer as nitrogen resources. Aerobic test was carried out by putting erlenmeyers in a shaker incubator, 120 rpm shaking speed, at 50°C temperature. While 150 days in microcosmic one observation showed that the consortium has the potential to grow up to 50% (v/v) sludge oil load. Maximum growth and maximum growth rate of the consortium occurred in the III …

Go to article

Determination Of Operation Condition And Product Dimension Accuracy Optimization Of Filament Deposition Modelling On Layer Manufacturing Application, Slamet A. Widyanto, Alva Edy Tontowi, Jamasri Jamasri, Heru Santoso Budi Rochardjo Nov 2006

Determination Of Operation Condition And Product Dimension Accuracy Optimization Of Filament Deposition Modelling On Layer Manufacturing Application, Slamet A. Widyanto, Alva Edy Tontowi, Jamasri Jamasri, Heru Santoso Budi Rochardjo

Makara Journal of Technology

Layer manufacturing process has proven as a process that can produce a high complexity mechanical part. Now, Improvement of LM methods continuously conduct that is aimed to increase precessions and efficiency of these processes. Pressure filament deposition modelling is a form of layer manufacturing process that is designed to produce a plastic part with controlling its semisolid phase. In this research, the equipment of filament depositor is designed and tested to make the product filament deposition. With operation condition observation, the optimal temperature and pressure of deposition process was determined. These experiments used PVC as crystalline material and polypropylene as …

Go to article

Magnetic Field Effects On Caco3 Precipitation Process In Hard Water, Nelson Saksono, Setijo Bismo, Elsa Krisanti, Azwar Manaf, Roekmijati Widaningrum Nov 2006

Magnetic Field Effects On Caco3 Precipitation Process In Hard Water, Nelson Saksono, Setijo Bismo, Elsa Krisanti, Azwar Manaf, Roekmijati Widaningrum

Makara Journal of Technology

Magnetic Field Effects on CaCO3 Precipitation Process in Hard Water. Magnetic treatment is applied as physical water treatment for scale prevention especially CaCO3, from hard water in piping equipment by reducing its hardness. Na2CO3 and CaCl2 solution sample was used in to investigate the magnetic fields influence on the formation of particle of CaCO3. By changing the strength of magnetic fields, exposure time and concentration of samples solution, this study presents quantitative results of total scale deposit, total precipitated CaCO3 and morphology of the deposit. This research was run by comparing magnetically and non-magnetically treated samples. The results showed an …

Go to article

Stress Corrosion Cracking Behavior Of Stainless Steel 304 In The Sulfuric Acid Environment Due To Prestrain, Mohammad Badaruddin, Ahmad Suudi, Arinal Hamni Nov 2006

Stress Corrosion Cracking Behavior Of Stainless Steel 304 In The Sulfuric Acid Environment Due To Prestrain, Mohammad Badaruddin, Ahmad Suudi, Arinal Hamni

Makara Journal of Technology

Stress Corrosion Cracking Behavior of Stainless Steel 304 in the Sulfuric Acid Environment Due to Prestrain. The aim of research is to investigate the effect of prestrain on the stress corossion cracking behavior of AISI 304 stainless steel in the sulfuric acid of 10% concentration under the static cantilever loading according to ASTM E-1681 standart. The specimen of 304 Stainless steel was strain up over the yield strength until reaching the uniform strain of 5% and 10% using servopulser UTM 9506 under the displacement control of 0,3 mm/sec. The results of test show that the prestrain of 5% specimen is …

Go to article

Segmental Sinusoidal Model For Speech Signal Coding, Florentinus Budi Setiawan, Soegijardjo Soegijoko, Sugihartono Sugihartono, Suhartono Tjondronegoro Nov 2006

Segmental Sinusoidal Model For Speech Signal Coding, Florentinus Budi Setiawan, Soegijardjo Soegijoko, Sugihartono Sugihartono, Suhartono Tjondronegoro

Makara Journal of Technology

Segmental Sinusoidal Model for Speech Signal Coding. Periodic signal can be decomposed by sinusoidal component with Fourier series. With this characteristic, it can be modeled referring by sinusoidal form. By the sinusoidal model, signal can be quantized in order to encode the speech signal at the lower rate. The recent sinusoidal method is implemented in speech coding. By using this method, a block of the speech signal with 20 ms to 30 ms width is coded based on Fourier series coefficients. The new method proposed is quantization and reconstruction of speech signal by the segmental sinusoidal model. A segment is …

Go to article

Immobilization Of Cytochrome C On The Surface Of Single-Wall Carbon Nanotube And Its Direct Electron Transfer And Electrocatalysis, Ya-Jing Yin, Ya-Fen Lv, Ping Wu, Pan Du, Yan-Mao Shi, Chen-Xin Cai Aug 2006

Immobilization Of Cytochrome C On The Surface Of Single-Wall Carbon Nanotube And Its Direct Electron Transfer And Electrocatalysis, Ya-Jing Yin, Ya-Fen Lv, Ping Wu, Pan Du, Yan-Mao Shi, Chen-Xin Cai

Journal of Electrochemistry

Cytochrome c(Cyto c) was immobilized on the surface of the single-wall carbon nanotube(SWNT) by using the method of adsorption.Infrared spectroscopy indicated that the Cyto c remained in its original structure and did not undergo structural change after its immobilization on the SWNT.The direct electrochemistry of cyto c,which was adsorbed on the surface of the SWNT,was studied by cyclic voltammetry.The voltammetric results demonstrated that the SWNT had promoting effects on the direct electron transfer of Cyto c and also indicated that the immobilized Cyto c retained its bioelectrocatalytic activity to the reduction of H2O2.This modified electrode might …

Go to article

Investigation Of The Direct Electrochemical Reduction Of Cr2O3 Powder In Molten Cacl2 By A Metallic Cavity Electrode, Guo-Hong Qiu, Di-Hua Wang, Xian-Bo Jin, Xiao-Hong Hu, Zheng Chen Aug 2006

Investigation Of The Direct Electrochemical Reduction Of Cr2O3 Powder In Molten Cacl2 By A Metallic Cavity Electrode, Guo-Hong Qiu, Di-Hua Wang, Xian-Bo Jin, Xiao-Hong Hu, Zheng Chen

Journal of Electrochemistry

A metallic cavity electrode is used for further investigation of the electrochemical behaviour of Cr2O3 powder in molten CaCl2(Na: ~0.02% by mass,Mg: < 0.005% by mass) at 900 ℃.The Cr2O3 powder reduction mechanism was confirmed in line with EDX and SEM analysis of the potentiostatic electrolysis products.The correlations between the particle size of metallised product and the electrolysis potential,or electrolysis time were analysed.

Go to article

Pre-Oxidative Amperometric Glucose Biosensor Incorporated With Carbon Nanotube And Pbo2, Hong-Lan Qi, Cheng-Xiao Zhang Aug 2006

Pre-Oxidative Amperometric Glucose Biosensor Incorporated With Carbon Nanotube And Pbo2, Hong-Lan Qi, Cheng-Xiao Zhang

Journal of Electrochemistry

A pre-oxidative amperometric glucose biosensor incorporated with carbon nanotube,ferrocenemonocarboxylic acid and PbO2 was designed.The interferences coming from reduced substances,such as ascoribic acid and urine acid were eliminated by PbO2.The oxidative current is linear at the potential of +0.40 V(vs.SCE) to the concentration of glucose in the range from 0.50 to 20 mmol·L-1,and the detection limit of glucose is 0.1 mol L-1.The relative standard deviation is 3.3% for seven successive assays at 5.0 mmol·L-1glucose.This biosensors have been applied to determination of the glucose in serum with satisfying results.

Go to article

The Influence Of Pva As Disperser On Lifepo4 Synthesized By Hydrothermal Reaction, Hui-Lin Li, Hui Zhan, Yu-Hong Zhou Aug 2006

The Influence Of Pva As Disperser On Lifepo4 Synthesized By Hydrothermal Reaction, Hui-Lin Li, Hui Zhan, Yu-Hong Zhou

Journal of Electrochemistry

LiFePO4 was synthesized by means of hydrothermal reaction,in which PVA acts as disperser and glucose as carbon source. The samples were characterized by X-ray diffraction, scanning electron microscopy and electrochemical measurement. SEM results show that the sample is homogeneously composed of grains with a particle size of ca.200nm. In the charge/discharge test, the products exhibited a 3.45V discharge voltage plateau and a maximum specific capacity of 140mAh/g. After 40 cycles, its capacity only declined by 2.1%. Besides these, the mechanism for the influence of the particle size and carbon coating on the electrochemical property of LiFePO4 material was …

Go to article

Calcined Temperatures Influence On Synthesis And Electrochemistry Charactarization Of Li[Ni0.475Mn0.475Co0.05]O2 For Li-Ion Batteries, Li-Qin Wang, Li-Fang Jiao, Hua-Tang Yuan, Yong-Mei Wang Aug 2006

Calcined Temperatures Influence On Synthesis And Electrochemistry Charactarization Of Li[Ni0.475Mn0.475Co0.05]O2 For Li-Ion Batteries, Li-Qin Wang, Li-Fang Jiao, Hua-Tang Yuan, Yong-Mei Wang

Journal of Electrochemistry

Layered Li[Ni0.475Mn0.475Co0.05]O2 materials have been prepared by a solid-state pyrolysis method.Experiments of XRD,SEM,cyclic voltammetry and charge/discharge cycling were carried out.It can be learned that when calclined at 800 ℃,the sample showed the highest first discharge capacity of 178.8 mAh·g-1 at a current density of 20 mA/g in the voltage range 2.3~4.6 V

Go to article

Investigation On The Resistance To Electrochemical Oxidation Of Carbon Nanotubes With Various Diameters, Yu-Yan Shao, Ge-Ping Yin, Yun-Zhi Gao, Peng-Fei Shi Aug 2006

Investigation On The Resistance To Electrochemical Oxidation Of Carbon Nanotubes With Various Diameters, Yu-Yan Shao, Ge-Ping Yin, Yun-Zhi Gao, Peng-Fei Shi

Journal of Electrochemistry

The resistance to electrochemical oxidation of multi-wall carbon nanotubes(CNT) with various diameters is investigated by applying a fixed potential of 1.2 V(RHE) for 120 h in 0.5 mol L-1 H2SO4.The oxidation current of CNTs decreases with their diameters,but CNTs between 10~20 nm in diameter(D1020) shows the lowest oxidation current.XPS analysis shows that,after oxidation,the increase in surface oxygen for D1020 is the smallest,implying that the oxidation degree for D1020 is the lowest.The conclusion can be reached that CNTs between 10~20 nm in diameter are the most resistant to electrochemical oxidation.The difference in electrochemical stability of CNTs …

Go to article

Studies On Synthesis And Electrochemical Performance Of LiXNi1/3Mn1/3Co1/3O2 As Cathode Material For Lithium Ion Batteries, Xiao-Jian Guo, Jie Li, Yi-Xiao Li, Yong Yang Aug 2006

Studies On Synthesis And Electrochemical Performance Of LiXNi1/3Mn1/3Co1/3O2 As Cathode Material For Lithium Ion Batteries, Xiao-Jian Guo, Jie Li, Yi-Xiao Li, Yong Yang

Journal of Electrochemistry

A series of LiNi1/3Mn1/3Co1/3O2 were synthesized by a combined hydroxides coprecipitation and calcination method.Effects of synthesizing temperature of coprecipitations and the Li∶M ratios on structure and electrochemical performance of the materials were studied.The results showed that materials synthesized with coprecipitation at room temperature(~20 ~(o)C) delivered the best electrochemical performance.Another series of cathode materials LiXNi1/3Mn1/3Co1/3O2 with different Li∶M ratios were synthesized with this method.The results showed that sintering at high temperature could cause loss of LiOH,thus more LiOH should be added.It is demonstrated that Li …

Go to article

Electrochemical Behavior Of Electrolytic Manganese Dioxide In Mgso4 Solution, Dan-Mei Yu, Yu-Jun Si, Chang-Guo Chen, Yu-Ping Liu, Yan Liu Aug 2006

Electrochemical Behavior Of Electrolytic Manganese Dioxide In Mgso4 Solution, Dan-Mei Yu, Yu-Jun Si, Chang-Guo Chen, Yu-Ping Liu, Yan Liu

Journal of Electrochemistry

The rechargeability and crystal structure changing of electrolytic manganese dioxide(EMD) in MgSO4 electrolyte were investigated by cyclic voltammetry,galvanostatic charge/discharge and X-ray diffraction.The results have shown that the EMD has good rechargeability;after several initial cycles,the charge and discharge became stability;after discharge,the γ-MnO2 structure of EMD was changed,the production was reversible and could be recharged to γ-MnO2 structure again which ensured the rechargeability of EMD.

Go to article

Socio-Economic Impacts Of Computer Viruses In Tanzania, M Victor Jun 2006

Socio-Economic Impacts Of Computer Viruses In Tanzania, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper reports on a research project conducted with an objective of identifying and assessing various approaches used by different computer users (Management, System Administrators and end users) in Tanzania to combat computer viruses (CVs), and to assess users' awareness level on CVs. Specifically, the study aimed at assessing the awareness level on CVs to the Tanzanian business community; analyze the socio -economic impact caused by CVs in Tanzania and; assess existing methods, capacity and limitations on controlling CVs in Tanzania. Data was collected using both questionnaires and interview from financial institutions such as NBC and BOT, and telecommunications sector …

Go to article

Synthesis Of Zinc Polyhedral Microspheres And Applications In Alkaline Zn-Mno2 Battery, Hua Ma, Chun-Sheng Li, Fang-Yi Cheng, Chun-Yuan Zhou, Feng Gao, Jun Chen May 2006

Synthesis Of Zinc Polyhedral Microspheres And Applications In Alkaline Zn-Mno2 Battery, Hua Ma, Chun-Sheng Li, Fang-Yi Cheng, Chun-Yuan Zhou, Feng Gao, Jun Chen

Journal of Electrochemistry

The zinc polyhedral microspheres were synthesized by evaporation of pure zinc powders via a vapor-transport process.The results characterized by XRD and SEM show that the as-synthesized zinc powders are polyhedral microspheres with the diameter of 2~3 μm.The electrochemical investigation showed that the capacity of the as-assembled AA-size primary alkaline Zn-MnO2 battery was increased to 3.14 Ah under the constant discharge current of 100 mA by using the as-deposited microspherical zinc powders as the anode active materials and γ-MnO2 nanowires as the cathode active materials,indicating their potential application in high-energy batteries.

Go to article

High Density Lifepo4/C Synthesized By Controlled Crystallization And Microwave Carbon Thermal Reduction, Chang-Ping Tang, Jie-Rong Ying, Min Lei, Wei Li, Chang-Yin Jiang, Chun-Rong Wan May 2006

High Density Lifepo4/C Synthesized By Controlled Crystallization And Microwave Carbon Thermal Reduction, Chang-Ping Tang, Jie-Rong Ying, Min Lei, Wei Li, Chang-Yin Jiang, Chun-Rong Wan

Journal of Electrochemistry

The spherical FePO4·xH2O was prepared in the solution by controlled crystallization.The precursor FePO4 was obtained in high temperatureceramic approach,then the high density LiFePO4 /C was synthesized by microwave carbon thermal reduction.The structure and morphology of the materials were characterized by means of XRD and SEM techniques,and the electrochemical properties were studies by charge-discharge experiments.

Go to article

Electrochemical Studies On Electrocatalytic Activity Of AuCore PtShell Nanoparticles To Methanol Oxidation, Fang Bao, Jian-Lin Yao, Ren-Ao Gu May 2006

Electrochemical Studies On Electrocatalytic Activity Of AuCore PtShell Nanoparticles To Methanol Oxidation, Fang Bao, Jian-Lin Yao, Ren-Ao Gu

Journal of Electrochemistry

AucorePtshell nanoparticles with different thicknesses were prepared by using chemical reduction method,and characterized by ultraviolet-visible spectroscopy(UV-Vis),transmission electron microscopy(TEM) and cyclic voltammetry(CV).The electrocatalytic activity of AucorePtshell nanoparticles with the mean diameter of 70~80 nm to methanol oxidation was investigated by cyclic voltammetry in the acid solution.The results revealed that the prepared core-shell nanoparticles were covered by Pt shell and exhibited the similar optical property and electrocatalytic activity with the normal Pt surface.Moreover,the electrocatalytic activity increased with the electrochemical sweep in the certain potential range.It might be contributed by the special loose structure of Pt shell …

Go to article

Electrochemical Behavior And Reduction Mechanism Of High Valence Silver Oxide Ag3O4 In Alkaline Solution, Yan Cheng, Ming Yu, Man-Ming Yan, Zhi-Yu Jiang May 2006

Electrochemical Behavior And Reduction Mechanism Of High Valence Silver Oxide Ag3O4 In Alkaline Solution, Yan Cheng, Ming Yu, Man-Ming Yan, Zhi-Yu Jiang

Journal of Electrochemistry

The electrochemical properties of high-valence silver oxide Ag3O4 in alkaline solution were investigated for the first time and the reduction mechanism of Ag3O4 was proposed. It can be recognized that Ag3O4 consists of Ag(Ⅲ) and Ag(Ⅱ)~(*). From the results of voltammetry and XRD experiments it was found that the reduction process of Ag3O4 was more complicated. It could be electrochemically reduced through the series reactions of Ag(Ⅲ) →Ag(Ⅱ) →Ag(Ⅰ) →Ag(O) at low discharge rate or Ag(Ⅲ) →Ag(Ⅰ) →Ag(O) at higher discharge rate.And the Ag(Ⅱ)~(*) could be reduced to …

Go to article

Electrochemical Studies Of Iron-Doped Nickel Oxide Electrode For Oxygen Evolution Reaction, Jin-Zhao Huang, Zheng Xu, Hai-Ling Li, Guo-Hu Kang, Wen-Jing Wang May 2006

Electrochemical Studies Of Iron-Doped Nickel Oxide Electrode For Oxygen Evolution Reaction, Jin-Zhao Huang, Zheng Xu, Hai-Ling Li, Guo-Hu Kang, Wen-Jing Wang

Journal of Electrochemistry

In this paper,the iron-doped nickel oxide thin film as anode catalyst was prepared by RF reactivesputtering method.The oxygen evolution reaction(OER) on the iron-doped nickel oxide was investigated withcyclic voltammetry,liner sweep voltammetry,polarization curves and electrochemical impedance spectroscopy.Results showthat the iron acts as active site in the film which makes the overpotential lower,and changes therate-limiting from primary discharge of OH-ions to the recombination of oxygen atom.With the increasing of ox-ygen content in flu ratio during sputtering,the electrocatalytic activities of the film increase.Iron-doped nickeloxide thin film is promising material as OER electrocatalyst for hydrogen production than the nickel electrode.The oxygen overpotential on the …

Go to article

Desulfovibrio Desulfuricans G20 Tetraheme Cytochrome Structure At 1.5 A˚ And Cytochrome Interaction With Metal Complexes, Mrunalini Pattarkine, J J. Tanner, C A. Bottoms, Y H. Lee, Judy D. Wall May 2006

Desulfovibrio Desulfuricans G20 Tetraheme Cytochrome Structure At 1.5 A˚ And Cytochrome Interaction With Metal Complexes, Mrunalini Pattarkine, J J. Tanner, C A. Bottoms, Y H. Lee, Judy D. Wall

Faculty Works

The structure of the type I tetraheme cytochrome c3 from Desulfovibrio desulfuricans G20 was determined to 1.5 A˚ by X-ray crystallography. In addition to the oxidized form, the structure of the molybdate-bound form of the protein was determined from oxidized crystals soaked in sodium molybdate. Only small structural shifts were obtained with metal binding, consistent with the remarkable structural stability of this protein. In vitro experiments with pure cytochrome showed that molybdate could oxidize the reduced cytochrome, although not as rapidly as U(VI) present as uranyl acetate. Alterations in the overall conformation and thermostability of the metal-oxidized protein were investigated …

Go to article

2nd Annual Undergraduate Research Conference Abstract Book, University Of Missouri--Rolla Apr 2006

2nd Annual Undergraduate Research Conference Abstract Book, University Of Missouri--Rolla

Undergraduate Research Conference at Missouri S&T

No abstract provided.

Go to article

Analysis Of Technical Energy Losses By Using Simulation, Betrianis Betrianis, Randite Herawan Apr 2006

Analysis Of Technical Energy Losses By Using Simulation, Betrianis Betrianis, Randite Herawan

Makara Journal of Technology

Model is a representation of a system. Through model, it can be easier to forecast and control the changing of each element system. Electricity distribution is also a system. Losses are general problem that exist in a distribution network system. But with the right methods, specifically technical energy losses can be reduced in order to increase the efficiency. By making model of the distribution network, the value of technical energy losses in the whole network as well as in every line can be observed. Simulation can also be used to see all losses reduction alternatives. By comparing results from each …

Go to article

Modeling Of Coupled-Tank System Using Fuzzy Takagi-Sugeno Model, Aries Subiantoro Apr 2006

Modeling Of Coupled-Tank System Using Fuzzy Takagi-Sugeno Model, Aries Subiantoro

Makara Journal of Technology

Modeling of Coupled-Tank System Using Fuzzy Takagi-Sugeno Model. This paper describes modeling of coupledtank system based on data measurement using fuzzy Takagi-Sugeno model. The fuzzy clustering method of Gustafson- Kessel algorithm is used to classify input-output data into several clusters based on distance similarity of a member of input-output data from center of cluster. The formed clusters are projected orthonormally into each linguistic variables of premise part to determine membership function of fuzzy Takagi-Sugeno model. By estimating data in each cluster, the consequent parameters of fuzzy Takagi-Sugeno model are calculated using weighted least-squares method. The resulted fuzzy Takagi-Sugeno model is …

Go to article

Design Of Induction Motor Drive Without Velocity Sensor Using Current Vector Controller With Full And Reduced Observer Moving To Dq Axis, Ridwan Gunawan, Feri Yusivar, Wahidin Wahab, Zuhal A. Kadir Apr 2006

Design Of Induction Motor Drive Without Velocity Sensor Using Current Vector Controller With Full And Reduced Observer Moving To Dq Axis, Ridwan Gunawan, Feri Yusivar, Wahidin Wahab, Zuhal A. Kadir

Makara Journal of Technology

Design of Induction Motor Drive Without Velocity Sensor Using Current Vector Controller with Full and Reduced Observer Moving to DQ Axis. The observer is used in estimation velocity sensor usually in α-β axis, therefore this situation will need an extra transformation when we want to add compensator because the flux model is in direct and quadrature-axis dq. Every used the transformation to make possible emerge an error. So in this simulation is used a method to estimate the velocity of induction motor drive with observer that is moved to dq-axis. The model of actual motor used is in alfa-beta axis, …

Go to article

Effect Of Firing Temperature And Holding Time On Characterization Of Al/Sic Metal Matrix Composites Produced By Pressureless Infiltration., Anne Zulfia, Myrna Ariati Apr 2006

Effect Of Firing Temperature And Holding Time On Characterization Of Al/Sic Metal Matrix Composites Produced By Pressureless Infiltration., Anne Zulfia, Myrna Ariati

Makara Journal of Technology

Effect of Firing Temperature and Holding Time on Characterization of Al/SiC Metal Matrix Composites Produced by Pressureless Infiltration. The production of Al-SiC metal matrix composite can be carried out by pressureless metal infiltration processs (PRIMEX). The experiment was conducted using aluminium AC2B ingot as a matrix and 50%Vf SiC powder as a reinforcement which is mixed with 10% Mg powder for wetting agent. The variables of this experiment are holding time and firing temperature to investigate the effect of these conditions on mechanical properties of Al-SiC metal matrix composites. Holding time was conducted for 2,5,8,10,12 hours and firing temperatures was …

Go to article

Development Of Fiber-Optic Humidity Sensor Probe With Gelatin Cladding, Akhiruddin Maddu, Kun Modjahidin, Sar Sardy, Hamdani Zain Apr 2006

Development Of Fiber-Optic Humidity Sensor Probe With Gelatin Cladding, Akhiruddin Maddu, Kun Modjahidin, Sar Sardy, Hamdani Zain

Makara Journal of Technology

Development of Fiber-Optic Humidity Sensor Probe with Gelatin Cladding. Humidity sensor based on optical fiber with gelatin cladding has been developed. In this humidity sensor probe, the origin cladding of optical fiber is replaced by gelatin coating as humidity sensitive cladding. Testing of the optical fiber sensor probe was conducted by measuring of light intensity transmitted on the optical fiber probe for each variation of different humidity treatments. Response of the optical fiber sensor probe measured from 42%RH to 99%RH, the results show an optical transmission curve varied with relative humidity (RH). Optical transmission in the optical fiber probe increase …

Go to article

First Prev Next Last