Chemical Engineering Commons^™

Principles Of Eliminating The Impact Of Disturbances On Integrated Information And Analytical Systems, Orifjon Olimovich Zaripov, Umidjon Sharabidinovich Hamrakulov, Fatima Faxritdinovna Isxakova

Chemical Technology, Control and Management

Today, production management using integrated information and analytical systems and their integration with the elements of Industry 4.0 is considered one of the most pressing problems in all areas of production. The correct formation of the structure of information systems in their development contributes to the formation of elements of Industry 4.0 and their further full and high-quality integration into other areas. When implementing these processes, one of the most important steps is to reduce the impact of disturbances on integrated information and analytical systems. Taking into account the above, the article considers mathematical models of the principles of eliminating …

Image Analysis Of Charged Bimodal Colloidal Systems In Microgravity., Adam J. Cecil

Electronic Theses and Dissertations

Colloids are suspensions of two or more phases and have been topics of research for advanced, tunable materials for decades. Stabilization of colloids is typically attributed to thermodynamic mechanisms; however, recent studies have identified transport or entropic mechanisms that can potentially stabilize a thermodynamically unstable colloidal system. In this study, suspensions of silsesquioxane microparticles and zirconia nanoparticles were dispersed in a nitric acid solution and allowed to aggregate for 8-12 days in microgravity aboard the International Space Station. The suspensions were subsequently imaged periodically at 2.5x magnification. Due to the inadequacy of existing image analysis programs, the python package “Colloidspy” …

Investigative Study Of Microalgal And Electrochemical Wastewater Treatment Systems And Modeling Of The Wafer-Enhanced Electrodeionization Using Supervised Learning, Humeyra Betul Ulusoy Erol

Graduate Theses and Dissertations

Wastewater has a serious impact on environment and public health due to its high concentration of nutrients and toxic contaminants. Without proper treatment, excess nutrients discharged in wastewater can cause a damage to the ecosystem such as undesirable pH shifts, cyanotoxin production, and low dissolved oxygen concentrations.

Main objectives of this dissertation work were to investigate i) the biofuel potential of P. cruentum when grown in swine wastewater, ii) the influence of four most commonly used ion exchange resins on the system efficiency and selectivity for the removal of sodium, calcium, and magnesium ions, and iii) the modeling of wafer-enhanced …

Synthesis Of Control Systems For Multidimensional Dynamic Objects Under Parametric Uncertainty Based On The Invariance Theory, U.F Mamirov

Chemical Technology, Control and Management

The problems of synthesis of control systems for multidimensional dynamic objects in the conditions of parametric uncertainty which are based on invariance theory are considered. When constructing stable synthesis algorithms, a recurrent method for determining pseudo-solutions of linear algebraic systems of equations is used. Computational algorithms for the solution based on singular matrix expansions are given. These computational procedures allow us to regularize the problem of synthesis of the considered algorithms for the synthesis of control systems for multidimensional dynamic objects under conditions of parametric uncertainty and improve the quality indicators of control processes.

Intellectual Educational Technologies Of Coherent Maintenance Of Digital Transformations, Igor Ivanovich Gancherenok, Ulugbek Mannanov, A.G. Davydovsky, Yu.A. Chernyavsky

Chemical Technology, Control and Management

The problems of forming adequate educational technologies and supporting digital transformations for the formation and development of relevant professional competencies as innovative receptivity are interpreted. The fundamental principles of educational technologies that act as a catalyst for educational innovations in the context of digital transformation of economic and social processes are described. The main modern educational platforms of educational support of professional activity are analyzed. The author's interpretation of the synergetic effects in the education system, as well as loans as an educational cryptocurrency is suggested.

Estimating The Bubbling Process Of Ozone-Containing Gases In The Water, M.P. Parpiev, А.А. Simonov, Aleksey Kamardin, Abdulaziz M. Nazarov

Chemical Technology, Control and Management

Theoretical estimates were made and significant factors of dissolution of ozone-containing gases in water during bubbling in tanks were determined. The expediency of using microbubbles for more efficient saturation of water and aqueous solutions with ozone and generation of ozone with maximum concentration is shown. It is shown that when bubbling gas in water, including ozone-containing gas, the most important indicator is the volume gas content, which determines the ratio of the volume of the gas phase to the volume of the gas-liquid mixture in the contact apparatus. In the presence of a set of bubbles in the water, the …

Study Of The Rheological Properties Of The Suspension Formed During The Production Of Caustic Soda By The Lime Method, Aktam Ulashovich Erkaev, Dildora Tursunova

Chemical Technology, Control and Management

The process of obtaining sodium hydroxide - caustic soda by conversion of soda ash with lime milk in the presence of natural mirabilite - has been investigated. The influence of temperature, Na₂CO₃: Na₂SO₄ ratio, concentration of lime milk and duration of the conversion process on this process was studied by identifying their optimal values. The study of the rheological properties of the reaction pulp showed that it is mobile and well filtered, which makes it possible to obtain rapidly settling large crystals of Na₂CO₃·2Na₂SO₄, Na …

Mathematical Models Of New Magnetoelastic Sensor For Measure Of Power And Vibration Parameters, Javhar Sulton Ugli Fayzullayev

Chemical Technology, Control and Management

In the paper, the mathematical models of the new magnetoelastic sensor for measuring power and vibration parameters are developed taking into account the aggregation or scattering of the parameters of electromagnetic chains and the characteristics of the magnetization curve of the magnetic conductor material. The analysis of the generated mathematical models and graphs based on them showed that the magnetic chain in which the coils are assembled does not take into account the nonlinearity of the magnetization curve of the magnetic conductive material (electrotechnical steel), the result is 12 ÷ 15% of the experimental results. It varies by 6 ÷ …

To Increasing The Absorption Area Of Column Apparatus With Tubular Lattice Nozzles, Nurmukhamedov Habibulla Sagdullaevich, Batir Babatulaev, Elbek Mavlanov, Samukdjan Nigmadjanov

Chemical Technology, Control and Management

The problem of creating a compact refrigeration zone for absorbers with tubular-lattice nozzles made of pipes with spiral turbulators is discussed. Research has been carried out on the influence of the groove depth h/D and α/α_гл of the step of their placement t/D on the degree of heat transfer intensification α/α_о in the transition region of the gas-liquid flow. An intensification of heat transfer has been achieved only by increasing the groove depth from h/D = 0,003 to 0,095 and the optimal pitch of the grooves, the intensity of heat transfer is 2 or more times. Research has …

Development Of A New Technology For Obtaining The Substance Of The Drug Acetamizole, Sarvar Saidov, Asqar Abdurazakov, Rixsibay Karimov, Mavluda Baltabayeva

Chemical Technology, Control and Management

The main goal of this work is to obtain a preparation of acetamizole based on local raw materials by a more convenient method of acylation of 2-methoxycarbonylaminobenzimidazole with glacial acetic acid, this synthesis method is proposed for the first time. On the basis of the conducted experiments, favorable conditions for the reaction were found, the influence of the nature of the acid, the temperature, the duration of the reaction and other factors on the course of the reaction was studied, the technology was developed and implemented at the experimental production of "IHRV AN RUz". Based on experiments conducted by scientists …

Mathematical Model Of A System For Controlling And Diagnosing The Safety State Of Oil And Gas Territory, Erkin Uljaev, Utkirjon Murodillaevich Ubaydullaev, Gayrat Bakhtiyarovich Tadzhitdinov, Sherzod Kholmuminovich Eshkuvatov

Chemical Technology, Control and Management

In this article, the way of creation mathematical model of a control system and diagnostics of the security status of the oil and gas territory is considered. For performing diagnostics of the safety of a status of the oil and gas territory as a mathematical apparatus it is suggested to use a boolean algebra. The main controlled objects and their technological parameters which define safety, integrity of saving, operational carrying out monitoring status as separate objects and all oil and gas territory, prediction of the expected threats, economic social, and economic damage are selected. For the creation of a mathematical …

Methodology For Determination And Assessment Of Uncertainty Sources Of Textile Materials Total Thermal Resistance, Abdurauf Abdurashidovich Abdukayumov, Ortagoli Sharipovich Hakimov

Chemical Technology, Control and Management

The problems of improving of methods for determination of the total thermal resistance of textile materials are considered. A comparative analysis of the applied methods based on stationary and non-stationary heat exchange is performed. A higher accuracy of non-stationary methods based on measuring the cooling time of a heat cell with subsequent determination of the cooling rate and the total thermal resistance of the material under study is noted. A method is proposed for estimating the variance of the main values required for calculating the total thermal resistance of materials. The results of the study of the relationship between sources …

Analysis Of Consistency Of Similarity Predicates To Measures Of Similarity And Advantages Of Their Application In Digital Systems For Solving Intellectual Problems, Makhmudjon Abdullaev, Nodira Batirdjanovna Alimova

Chemical Technology, Control and Management

The results of the analysis of the correspondence of similarity predicates to similarity measures used in various metric methods used for signal classification and the feasibility of using similarity predicates in the construction of digital systems for solving intellectual problems, for which the simplification of computational operations is of no small importance, are presented. Some general and distinctive features of the similarity predicate are considered in comparison with the euclidean metric in relation to one-dimensional and two-dimensional spaces, and generalized to the case of n-dimensional metric spaces. The expediency of using methods based on the calculation of similarity predicates, which …

Relating Modified Ergun's Equation To Hindered Settling Correlations, Ryan Zahniser

Williams Honors College, Honors Research Projects

Correlations were developed between the Modified Ergun’s and Hindered settling correlations under the condition of dense packing of particles in the bed. As the porosity of the slurry increases, so does the interference between particles in the solution which mimics the behavior of a packed or densely concentrated fluidized bed. The similarity between the two sets of conditions was modeled using mathematical equations to calculate settling velocities and pressure drops by means of the Hindered Settling correlations and Modified Ergun’s equation at porosities ranging from 0.4242 to 0.89. The results showed that a porosity of 0.52 and 0.009 ft particle …

Modeling Residence Time Distribution Of Chromatographic Perfusion Resin For Large Biopharmaceutical Molecules: A Computational Fluid Dynamic Study, Kevin Vehar

KGI Theses and Dissertations

The need for production processes of large biotherapeutic particles, such as virus-based particles and extracellular vesicles, has risen due to increased demand in the development of vaccinations, gene therapies, and cancer treatments. Liquid chromatography plays a significant role in the purification process and is routinely used with therapeutic protein production. However, performance with larger macromolecules is often inconsistent, and parameter estimation for process development can be extremely time- and resource-intensive. This thesis aimed to utilize advances in computational fluid dynamic (CFD) modeling to generate a first-principle model of the chromatographic process while minimizing model parameter estimation's physical resource demand. Specifically, …

Flow Patterns, Velocity Distributions And Mixing Time In Stirred Tank Reactor Under A Range Of Operating Conditions, Nor Haslina Abdullah

Student Works (2020-2029)

The present work employed a two-dimensional Particle Imaging Velocimetry (PIV) technique to determine the flow patterns and velocity distributions of a down-pumping pitched-blade turbine (4PB) and a Rushton turbine (RT) in a flat-bottom fully baffled stirred vessel (T=0.155m) using distilled water and glycerin as liquids. Fluid velocities increased as the impeller speed increased from 50rpm to 300rpm for both fluids and the RT impeller reached a maximum value of velocity of 1.42m/s at the blade tip. The 4PB had higher velocity compared to RT in glycerin, but RT had higher velocity than 4PB in distilled water. In water, radial flow …

An Improved Foam Modeling Technique And Its Application To Petroleum Drilling And Production Practice, Yanfang Wang

LSU Doctoral Dissertations

Foam is one of the most common used multiphase fluid in Underbalanced Drilling (UBD) and Managed Pressure Drilling (MPD). Because of its low density, high capacity of lifting and carrying cuttings, low cost and compatibility with formations, foam has become more superior than the conventional drilling mud when depleted reservoir pressure, severe lost circulation, or unstable borehole are encountered. In general, the success of foam applications rely on the understanding of the fundamentals of foam rheology in downhole conditions.

Foam rheology has been studied for decades. Conventional foam rheological models such as Power Law, Bingham Plastic, Herschel-Bulkley to explain foam …

Preparation Characterization And Tribological Behavior Of Lube Oil With Nanoparticles Additives, Waleed Alghani

Student Works (2020-2029)

There are many companies worldwide that would like to improve and upgrade the lube oil and enhance its performance. There is a big concern for the enhancement of lube oil by using nanotechnology and more precisely with using nanomaterial additives. Much work has made to explore and develop new sorts of lubricating oil nano-additives to diminish wear and friction in tribological configurations and to enhance surface morphology. It has noted that the use of dual nano-additives should examine the lubricating capacity and durability of lubricant. (TiO2 Anatase + Graphene) and (ZnO + Graphene) nanoparticles have selected to formulate nano-additives that …

Process Improvement And Microbial Characterisation Of Biological Nitrogen Removal For Tropical Wastewater With Low Chemical Oxygen Demand/Nitrogen Ratio, How Seow Wah

Student Works (2020-2029)

Malaysia has one of the most established biological nitrogen removal in wastewater treatment plants (WWTPs) among the developing Southeast Asian countries. The current WWTPs’ design and operating guidelines in Malaysia are mainly derived from other developed countries with more experiences in operating biological nitrogen removal. These design guidelines are good practices for WWTPs in the temperate climate region, but may not be optimal for the local wastewater characteristics and tropical climate in Malaysia. The local wastewater industry is keen to improve the design and operation of WWTPs to reduce the energy consumption and operating cost, which helps to foster a …

Fractionation And Characterization Of Extracted Lignin From Oil Palm Empty Fruit Bunch Using Synthesized Deep Eutectic Solvents, Tan Yee Tong

Student Works (2020-2029)

Deep eutectic solvent (DES), a new generation green solvent has been introduced as an alternative pretreatment solvent due to its ability for lignocellulosic biomass fractionation and lignin extraction. Numerous types of compounds can be adopted as DES constituents, which has resulted in abundant variation of DES with varying properties. Selection of the suitable chemical compound category is therefore essential for optimum DES performance. However, investigation on the performance comparison between the different DES categories is lacking. In addition, despite its widely acknowledged effectiveness in biomass fractionation, the properties of DES-fractionated biopolymers, especially lignin are not well understood. Hence, this project …

A Study Of Security Problems In Big Data And Their Solutions, Nozima Akhmedova

Chemical Technology, Control and Management

Statistical data on information security that concerns Big Data and is the most important for enterprises are provided. Based on this data, we studied problems such as the lack of big data practices and protection, the lack of techniques for protecting big data, the lack of standards for protecting big data, the lack of regulation of big data and ecosystems, security problems in Big Data, and proposed several proposals to improve the security of systems that use this technology.

Optimal Ratio Of Primary And Secondary Clarifier Characteristics In Wastewater Treatment Plants, Makhsud Idrisovich Makhmudov, Zafarbek Esanovich Kuziev, Siroj Sobirovich Nurov, Sanjar Siroj Ugli Sidikov

Chemical Technology, Control and Management

The issues of optimization of aerobic biological wastewater treatment processes are considered. Optimal ratios of characteristics and sizes of primary and secondary sedimentation tanks, as well as their relationship with the concentration of activated sludge by volume, are revealed. Graphical representations of the dependence of the volumes of primary, secondary and total volumes of structures on the concentration of activated sludge in cleaning processes with low and high loads are obtained. Experimental studies have shown that the concentration of activated sludge in the aeration tank and the silt index directly affect the deposition characteristics of activated sludge, in particular the …

Conceptual Basis For Modeling Multi-Cordinate Mechatronic Robot Modules, Yusupbekov Azizbek Nodirbekovich, Nazarov Khayriddin Nuritdinovich, Matyokubov Nurbek Rustamovich, Temurbek Omonboyevich Rakhimov

Chemical Technology, Control and Management

The conceptual foundations of modeling multi-coordinate mechatronic modules of robots are considered. The use of a multi-coordinate mechatronic movement module in robots made it possible to obtain at the output of one module several linear and angular coordinates, which reduces the weight and dimensions of the robot and thereby improves its dynamic characteristics. The proposed original concept of the mathematical description of a multi-coordinate mechatronic module, which is focused on displaying their structural and operating features. A structural diagram of a developed industrial robot operating in a Cartesian coordinate system and built on the basis of a multi-coordinate mechatronic module …

Ecg Processing And Analysis Technique Based On Neural Network Learning Vector Quantization, Talat Madievich Magrupov, Sherzod Kalandarovich Nеmatov, Yokubjon Talatovich Talatov

Chemical Technology, Control and Management

The main parameters of the electrocardiogram (ECG) were processed on the basis of the neural network apparatus. A decision support algorithm for ECG analysis using a neural network for learning vector quantization is proposed. For the study was chosen such features as the duration of QRS complex, RR interval, amplitude of R-wave and the change in the slope of ST segment and heart rate, which are five inputs to the neural network learning vector quantization. Methods of pre-processing and analysis of extraction of ECG functions based on the ECG database of a medical institution in Matlab are presented. The generalized …

Capacity Transformer Of Coaxial And Cylindrical Form Of Humidity Meter, Erkin Uljaev, Utkirjon Murodillaevich Ubaydullaev, Shohrux Nurali O'G'Li Narzullaev

Chemical Technology, Control and Management

The question of development and calculation of construction of a coaxial and cylindrical form of the capacity transformer of a humidity meter is considered. As basic data, the sizes and the materials ditches allowing to measure the humidity of different volumes of bulks from 5 to 50 gr are selected. As materials of a ditch, plastic are selected, and as tanks, the magnetizing materials are selected. It is briefly cited the advantages and disadvantages of ways to measure humidity and the basic dielectric characteristics of capacitive converters. The electrical replacement scheme of the proposed capacitive converter was provided and the …

Static Characteristics Of Thermal Humidity Converters Of Liquid Materials In Continuous Flow, N.I. Avezova, P.R. Ismatullaev, Paraxat Matyakubova

Chemical Technology, Control and Management

Thermal systems with distributed heat sources based on a pipeline segment with radial holes are proposed for the development of designs of thermal humidity converters for liquid materials. Across the liquid flow there are tubular arguments with cylindrical heat-sensitive elements, on the surface of which the heating element winding was wound, which significantly increased their sensitivity, speed, reliability and allowed the use of standard semiconductor heat-sensitive elements.

A Study Of Static And Dynamic Characteristics Of Multifunctional Signal Converters, Akmal Abdumalikov

Chemical Technology, Control and Management

The issues of continuity, accuracy, speed and reliability of signal conversion, which are the main problems of quality control and management of production processes, remain relevant. Research shows that in practice there are different signal variables, the study of which is highly formalized in a number of modeling tasks and basic classification studies, in particular transients in converters, its sources and elements requires a unified mathematical approach, that is, visual, highly formalized modeling and research based on it. The paper presents a graph model of multifunctional signal converters that provide microprocessor and electronic devices with signals in the form of …

Identification Of Transition Matrix Of Controlled Objects Under Parametric Uncertainty Condition, Uktam Farkhodovich Mamirov

Chemical Technology, Control and Management

The questions of formation and construction of algorithms for identification of elements of the transition matrix of controlled objects in conditions of parametric uncertainty are considered. To identify elements of the transition matrix, we suggest using a custom model based on the type of Kalman filtration equations. Algorithms for stable calculation of a pseudo-inverse matrix using matrix decomposition are analyzed. Regular algorithms for solving argumentative problems of minimization of the identification quality criterion are given. These algorithms allow us to regularize the problem of adaptive identification of the transition matrix of an object based on regular methods for minimizing functionals …

Structural – Parametric Analysis And Synthesis Of Glass Furnace Condition Observer, Utkir Uktam O‘G‘Li Kholmanov

Chemical Technology, Control and Management

A modified Kalman filter of the glass cooking process is synthesized, taking into account perturbations in the form of a sequence of colored noises. The possibility of expanding this filter by noise filters to improve functioning in the presence of low-frequency disturbances is studied and a corresponding estimation scheme with additional noise filters is proposed. The results of the simulation allow us to assume that low-frequency disturbances in the glass furnace act at the input and affect the state of the control object.

Reliable Risk Assessment Method For Effective Organization Of Information Security At Enterprise, Fayzullajon Bakhtiyorovich Botirov

Chemical Technology, Control and Management

The problems of the new industry 4.0 automation paradigm are considered and the latest technologies in the field of information and communication technologies that stimulate it are analyzed, including cyber-physical systems, cloud computing, the Internet of things and big data. Some methods of multidimensional, multi-faceted industrial representation and analysis of big data are proposed. The basics of big data processing using granular computing methods have been developed. Marked the emergence of the problem of creation of special cognitive tool for constructing artificial agents, understanding integrated intelligence enterprises. In the process of information protection at the enterprise, it is proposed to …