Chemical Engineering Commons^™

Materials, Micro-Stacks And Related Applications Of Single-Chamber Solid Oxide Fuel Cells, Zhe Lv, Bo Wei, Zhi-Hong Wang, Yan-Ting Tian

Journal of Electrochemistry

Single-chamber solid oxide fuel cell (SC-SOFC) is a special type of fuel cells, in which both an anode and a cathode are placed in one chamber. Its working principle relies on the selective catalytic activity of the electrodes towards fuel and oxidant in a gas mixture, leading to the generation of an electromotive force. Because of its unique principle and structure, SC-SOFC has many advantages such as sealing-free, easy stacking, quick start-up and no carbon deposition, thus, it possesses large potential in application. Herein, the principles and characteristics of SC-SOFC are introduced. Furthermore, the SC-SOFC materials, micro-stack design, degeneration mechanisms …

Recent Advances Of Co2 Electrochemical Reduction In Solid Oxide Electrolysis Cells, Yi-Hang Li, Chang-Rong Xia

Journal of Electrochemistry

Solid oxide electrolysis cells (SOECs) have stimulated wide interests for their promising application in the reduction of CO₂ emissions and the storage of renewable energy. Here, the advances made in the development of cathode materials including cermets and perovskite oxides in our research group, are summarized, along with the design of cell configurations. The electrochemical kinetics and performances of cathodes and cells are discussed and analyzed. It is expected that this brief review offers critical insights and useful guidelines for developing superior electrodes and SOECs in the future.

Nio@Rgo Supported Palladium And Silver Nanoparticles As Electrocatalysts For Oxygen Reduction Reaction, Shuo Yao, Tai-Zhong Huang, Rizwan Haider, Heng-Yi Fang, Jie-Mei Yu, Zhan-Kun Jiang, Dong Liang, Yue Sun, Xian-Xia Yuan

Journal of Electrochemistry

For pervasive applications of fuel cells, highly efficient and economical materials are required to replace Pt-based catalysts for oxygen reduction reaction (ORR). In this study, the NiO@rGO, Pd-NiO@rGO and Ag-NiO@rGO nanoparticles were synthesized, and their catalytic performances toward ORR were investigated. The results revealed that all the three materials were capable of catalyzing ORR, but both the Pd-NiO@rGO and Ag-NiO@rGO showed the better performances compared with the NiO@rGO in terms of the reaction pathway being 4-electron process, the increases of the onset potential and the intermediate yielding rate, as well as the extended stability. Moreover, the effect of Pd modification …

Recent Progress In The Mechanistic Understanding Of Co2 Reduction On Copper, Matthew M Sartin, Wei Chen, Fan He, Yan-Xia Chen

Journal of Electrochemistry

In this review, we present the major developments in the understanding of the mechanisms of the electrochemical reduction of CO₂ from a historical perspective. Most of the work discussed in this review was carried out at copper electrodes, as this is the only material at which hydrocarbons are produced in reasonable quantities. The emphasis focuses on the differentiation of mechanisms for the generation of C1 and C2 products as well as factors and methods for controlling the product selectivity of CO₂ reduction. We have highlighted ambiguities, assumptions, and important methodologies, such as differential electrochemical mass spectrometry and electrochemical …

Preparations Of Nickel-Iron Hydroxide/Sulfide And Their Electrocatalytic Performances For Overall Water Splitting, Hang-Shuo Lu, Xiao-Bo He, Feng-Xiang Yin, Guo-Ru Li

Journal of Electrochemistry

The Ni-Fe/Ti oxygen evolution electrode was prepared by electrodeposition on a titanium mesh substrate. Then, the as prepared Ni-Fe/Ti electrode was used to derive the Ni-Fe-S/Ti hydrogen evolution electrode through solid phase sulfuration. The effects of the molar ratio of Ni²⁺ to Fe³⁺ in the electrolyte and the amount of thiourea on the structures and electrochemical performances of Ni-Fe/Ti and Ni-Fe-S/Ti electrodes were investigated. The results show that the oxygen evolution performance of Ni-Fe/Ti electrode was first increased and then decreased with the increase of nickel ion content in the electrolyte. The Ni9Fe1/Ti electrode exhibited the best oxygen …

Electrochemical Preparations And Applications Of Nano-Catalysts With High-Index Facets, Chi Xiao, Na Tian, Zhi-You Zhou, Shi-Gang Sun

Journal of Electrochemistry

The performance of catalysts highly depends on their surface structure and composition. Nanocrystals bounded by high-index facets usually exhibit high catalytic activity due to their high-density low-coordinated step atoms with high reactivity. In this paper, we have reviewed the preparations of noble metals (e.g., Pt, Pd and Rh) nanocatalysts with high-index facets by electrochemical square-wave potential method developed in our group. The square-wave potential method includes a nucleation procedure to generate nuclei, followed by a square-wave potential procedure for a certain period of time for the growth of nuclei into nanocrystals. The formation mechanism of high-index facets is also discussed. …

Research Progresses In Polymeric Proton Exchange Membranes For Fuel Cells, Xu-Po Liu, Yun-Feng Zhang, Shao-Feng Deng, De-Li Wang, Han-Song Cheng

Journal of Electrochemistry

Proton exchange membrane (PEM) is one of the key components in PEM fuel cells, which possesses the function of separating the cathode and anode, affording proton transport channels and preventing fuel permeability. The property of PEM significantly influences the performance and service life of fuel cells. Nowadays, the commercially used Nafion membranes have the shortcomings of serious fuel permeability, low proton conductivity at elevated temperature and high price, which limits the rapid development of PEM fuel cells. Therefore, it seems to be urgent to develop novel PEMs with low cost and good comprehensive properties. Polymeric proton exchange membrane is an …

Effect Of Nitrogen Content In Catalyst Precursor On Activity Of Fen/C Catalyst For Oxygen Reduction Reaction, Zhi Yang, Ya-Yun Shen, E Zhou, Cheng-Ling Wei, Hao-Li Qin, Juan Tian

Journal of Electrochemistry

Non-noble metal catalysts with high activity and low cost have attracted increasing interest as potential catalysts for oxygen reduction reaction (ORR) to replace Pt-based catalysts. In this paper, the effect of nitrogen content in catalyst precursor on ORR activity of FeN/C catalyst was investigated by X-ray diffraction (XRD), Brunauer-Emmet-Teller (BET) surface area and pore size distribution measurements, transmission electron microscope (TEM), thermogravimetric analysis (TGA), and rotating disk electrode (RDE) techniques. The results show that the most active catalyst was obtained by pyrolysis in argon at 1050 °C with a catalyst precursor containing 20wt% 1,10-phenanthroline, 1wt% Fe and Black Pearl 2000. …

Challenges In The Activity And Stability Of Pt-Based Catalysts Toward Orr, Tuo Zhao, Er-Gui Luo, Xian Wang, Jun-Jie Ge, Chang-Peng Liu, Wei Xing

Journal of Electrochemistry

The development of highly efficient oxygen reduction reaction (ORR) catalysts is the key to the commercialization of fuel cells, where the sluggish ORR reaction rate needs to be overcome by adjusting the intermediates adsorption energies on the catalytic surfaces. To-date, platinum (Pt)-based materials are the-state-of-the-art catalysts in terms of both activity and stability in ORR, making them the preferred choice for commercial applications. However, the high cost of Pt-based catalysts limits their widespread use, leading to massive effects paid in reducing Pt loading, improving catalyst activity and stability. This article illustrates the challenges in the ORR reaction and introduces the …

Preparation And Electrocatalytic Performance Of Nico2O4/Ni Foam For Hydrogen Peroxide Electrooxidation, Wei-Wei Chen, Fei-Fan Zhang, Jia-Liang Du, Yi Wang, Chun-Lin Zhao, Kai Zhu, Dian-Xue Cao, Gui-Ling Wang

Journal of Electrochemistry

The electrodes of Ni foam supported NiCo₂O₄ nanowires were prepared by hydrothermal method, followed by a thermal treatment in air, and were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). It was found that the NiCo₂O₄ nanowires had a diameter of about 50 nm with a length up to 3 ~ 5 μm. The catalytic performances of the Ni foam supported NiCo₂O₄ nanowires for H₂O₂ electrooxidation were studied by cyclic voltammetry and chronoamperometry. The results show that the Ni foam supported NiCo …

Nanoscale Colocalization Of Fluorogenic Probes Reveals The Role Of Oxygen Vacancies In The Photocatalytic Activity Of Tungsten Oxide Nanowires, Meikun Shen, Tianben Ding, Steven T. Hartman, Fudong Wang, Christina Krucylak, Zheyu Wang, Che Tan, Bo Yin, Rohan Mishra, Matthew D. Lew, Bryce Sadtler

Electrical & Systems Engineering Publications and Presentations

Defect engineering is a strategy that has been widely used to design active semiconductor photocatalysts. However, understanding the role of defects, such as oxygen vacancies, in controlling photocatalytic activity remains a challenge. Here, we report the use of chemically triggered fluorogenic probes to study the spatial distribution of active regions in individual tungsten oxide nanowires using super-resolution fluorescence microscopy. The nanowires show significant heterogeneity along their lengths for the photocatalytic generation of hydroxyl radicals. Through quantitative, coordinate-based colocalization of multiple probe molecules activated by the same nanowires, we demonstrate that the nanoscale regions most active for the photocatalytic generation of …

Tuning The Activity And Stability Of Platinum Nanoparticles Toward The Catalysis Of The Formic Acid Electrooxidation, Islam M. Al-Akraa, Bilquis A. Al-Qodami, Santosh Sridhar Mysore Dr, R. Viswanatha Dr, Abdul Kareem Thottoli, Ahmad M. Mohammad

Chemical Engineering

No abstract provided.

Continuous-Flow Synthesis Of Fine Chemicals And Pharmaceutical Compounds Over Intelligent Organocatalysts With Bifunctional Reactivity, Abdo-Alslam Alwakwak

Doctoral Dissertations

“Many biological systems that utilize organic active sites to catalyze reactions under mild conditions invoke cooperative catalytic pathways, whereby two or more active sites work together to activate the reactant(s). The use of cooperative (bifunctional) catalysts and continuous flow chemistry (a reaction within the narrow channels of a micro‐ or microfluidic reactor) are commonplace in sustainable chemical transformation and attract a great deal of interest with respect to economic and environmentally-sustainable production of fine chemicals, pharmaceuticals, and agrochemicals, water treatment, as well as upgrading of biomass feedstocks. Although, some methods have been developed for immobilization of bifunctional catalysts for cooperative …

Enhanced Glucose Electrooxidation At Ni-Cu Binary Oxide Nanocatalyst, Islam M. Al-Akraa, Mahmoud M. Abouzaid Eng, Yaser M. Asal Mr, Ahmad M. Mohammad Prof

Chemical Engineering

The aim of this study is to fabricate a nickel (NiOx) and copper (CuOx) oxide nanocatalyst on a glassy carbon (GC) electrode (will be abbreviated as Ni-Cu/GC) for glucose oxidation (GO). A sequential electrodepositon mode was applied to assemble NiOx and CuOx in the fabrication scheme. The optimization of Ni loading on the GC surface (will be abbreviated as Ni/GC electrode) was achieved first to attain the maximum catalytic efficiency in terms of the specific current toward GO. This (409 Ag1)was obtained by applying 15 mC/cm2 in the deposition of Ni. However, unfortunately the NiOx/GC could not support a long-term …

Effect Of The Electrodeposition Potential Of Platinum On The Catalytic Activity Of A Pt/Gc Catalyst Toward Formic Acid Electro−Oxidation, Islam M. Al-Akraa, Bilquis A. Al-Qodami Ms., Ahmad M. Mohammad Prof

Chemical Engineering

The electrocatalytic activity of platinum (Pt)–modified glassy carbon (GC) (referred as Pt/GC) electrodes toward the formic acid electro−oxidation (FAO) was investigated. The Pt deposition on the GC substrate was carried out by a potentiostatic technique at different potentials (from 0.2 V to −0.2 V vs. Hg/Hg2Cl2/KCl (sat.) reference electrode) and the corresponding influence on the catalytic activity toward FAO was monitored. The electrocatalytic inspection revealed a potential role for the Pt deposition potential in boosting the catalytic efficiency of the catalyst toward FAO and further in mitigating the CO poisoning that eventually deactivate the catalyst. Interestingly, the highest activity toward …

Development Of Novel Adsorbent For Industrial Waste Water Treatment, Islam M. Al-Akraa, Hassan M. Shehata Eng, Dalia A. Ali Eng., Hoda A. Elsawy Dr

Chemical Engineering

The main objective of this research project is to perform some experimental procedures to inform the ability of the novel adsorbent used in this project. The chemical modification of the adsorbent is the chemical oxidation of pure powder chitosan using some specific redox pairs which are potassium dichromate and sodium bisulphite. After preparing the modified chitosan, there are some parameters that must be discussed during the adsorption process. The first parameter is the time parameter, showing experimentally the optimum time for adsorption under certain conditions by collecting values of absorbance and concentration of thymol blue adsorbed after the process from …

A Spin-Coated Tiox/Pt Nanolayered Anodic Catalyst For The Direct Formic Acid Fuel Cells, Islam M. Al-Akraa, Ahmad M. Mohammad Prof

Chemical Engineering

The CO poisoning of the platinum anodic catalyst which typically functions the catalytic deterioration of the direct formic acid fuel cells could be minimized with a simple modification for Pt with titanium oxide. The fabrication scheme involved the spin-coating of a Ti precursor onto a Pt thin layer that was physically sputtered onto a Si substrate. The whole assembly was subjected to a post-annealing processing to produce the TiOx layer (60 nm) in a porous structure (mostly Anatase) atop of the Pt surface. The porous nature of the TiOx layer permitted the participation of Pt in the electrocatalysis of the …

Gravity-Drawing Flexible Silicone Filaments As Fiber Optics And Model Foldamers, Katherine Snell

CMC Senior Theses

Here, we present a method of gravity-drawing polydimethylsiloxane (PDMS) silicone fibers with application as fiber optics and as model foldamers. Beginning as a viscous liquid, PDMS is cured using heat until its measured viscosity reaches 4000 mPa•s. The semi-cured elastomer is then extruded through a tube furnace to produce thin (diameters on the order of hundred micrometers) filaments with scalable lengths. PDMS is biocompatible, gas-permeable, flexible, and hydrophobic. Additionally, the PDMS surface hydrophobicity can be modified via UV exposure, O2 plasma, and corona discharge. We demonstrate the patternibility (i.e patterns of hydrophobicity) of PDMS fibers, adding complexity to potential foldamer …

Synthesis Of Graphene Using Plasma Etching And Atmospheric Pressure Annealing: Process And Sensor Development, Andrew Robert Graves

Graduate Theses, Dissertations, and Problem Reports (ETD)

Having been theorized in 1947, it was not until 2004 that graphene was first isolated. In the years since its isolation, graphene has been the subject of intense, world-wide study due to its incredibly diverse array of useful properties. Even though many billions of dollars have been spent on its development, graphene has yet to break out of the laboratory and penetrate mainstream industrial applications markets. This is because graphene faces a ‘grand challenge.’ Simply put, there is currently no method of manufacturing high-quality graphene on the industrial scale. This grand challenge looms particularly large for electronic applications where the …

Design Of Pigments For Use In “Cool” Coatings, Tyler Laughorn

Williams Honors College, Honors Research Projects

This project was focused on the development and testing of several novel pigments that exhibit high NIR-reflectance and therefore show potential for use in “cool” coatings. A “cool” coating will reflect more solar radiation than other standard coatings, and so a coated structure would require less energy to keep cool. Four sets of pigments were synthesized: Co_1-xMg_xCr₂O₄ (teal), Co_0.25Mg_0.75Cr_2-yAl_yO₄ (blue), Ti_1-x-yNi_xSb_yO₂ (yellow), and Cr_2-xFe_xO₃ (black). NIR and TSR values were then measured …

Filtration Apparatus Design For Oil-Water Separation Using Membranes And Sponges, Alec Jerger

Williams Honors College, Honors Research Projects

It can be difficult to separate water and oil emulsions through traditional filtration. Therefore, investigations of filtering using thermo-responsive (TR) polymers, in this case poly(vinyl methyl ether) (PVME), was conducted. It’s hypothesized that below its lower critical solution temperature (LCST), PVME has an affinity for water while oil substances do not. Above the LCST the opposite will be true. To verify this hypothesis, iterations of filtration designs were created to provide optimum control over the parameters to measure flow. The final optimized experimental apparatus was a Chromaflex glass column which was air tight and controlled all parameters besides fluid flow. …

Using Batman Software To Analyze Metabolic Changes In Type 1 Diabetes-Susceptible Rats, Connor Hall

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Reactions At The Critical Point Of Solution, Jason Mote

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Structure, Morphology And Composition-Property Elucidation Of Ni–Mo And Ni−Mo−P Nanocrystals For Water Splitting Reactions And Group Iv Alloy And Silicate Nanocrystals For Visible To Near Ir Optoelectronics, Ebtesam Hassan Abuelenein Eladgham

Theses and Dissertations

Abstract

Structure, Morphology and Composition-Property Elucidation of Ni–Mo and Ni−Mo−P Nanocrystals for Water Splitting Reactions and Group IV Alloy and Silicate Nanocrystals for Visible to Near IR Optoelectronics

by

Ebtesam Hassan Abuelenein Eladgham

A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy at Virginia Commonwealth University.

Advisor: Indika U Arachchige

Associate Professor, Department of Chemistry

Nanomaterials have gained a great attention because of their unique physical properties with size intermediate between molecular materials and extended solids. They have a large surface to volume ratio and display size tunable physical properties that was not …

Analysis Of Mass Transfer Coefficient Of Co2 Absorbed By Two-Component Amine Mixture In A Packed Bed Column, Thanakornkan Limlertchareonwanit

Chulalongkorn University Theses and Dissertations (Chula ETD)

Nowadays, coal fired plant has an important role in generating energy all over the world. It affects to greenhouse gases effect (GHGs) and global warming. Carbon dioxide (CO2) is a product of coal combustion that is the amount of number one in the world. However, most of the CO2 usually remove from post-combustion process by chemical absorption which is Monoethanolamine (MEA). Anyway, MEA has a disadvantage such as low CO2 loading and corrosion. Therefore, this study needs to investigate the effect of the mass transfer for a new solvents, 2-(Methylamino)ethanol (2-MAE) and Dimethylaminoethanol (DMAE), compensate for the drawbacks of MEA …

Effect Of Cocatalyst Combination In Titanium-Based Ziegler-Natta Catalyst On Olefin Polymerization, Thanyaporn Pongchan

Chulalongkorn University Theses and Dissertations (Chula ETD)

This research focused on effect of cocatalyst types (TEA, TnOA, and TEA+TnOA) on titanium-based Ziegler-Natta catalyst in olefin polymerization both in slurry and gas-phase systems. This study has been divided into four sections. The commercial titanium-based catalyst was selected to investigate effect of reaction temperature and oxidation state of titanium from ESR measurement on slurry ethylene and propylene polymerization in the first and the second parts, respectively. The commercial catalyst with TEA exhibited the highest activity in ethylene polymerization. However, divalent, and trivalent of titanium (Ti2+ and Ti3+) was active in ethylene polymerization to produce more polymer. Stability of Ti3+ …

Development Of Graphite-Based Conductive Patterns By Copper Electroless Plating And Electroplating Techniques, Vipada Aupama

Chulalongkorn University Theses and Dissertations (Chula ETD)

The screen-printing technique has been widely applied in electronic manufacturing field. In this work, graphite is used for fabricating conductive patterns by screen-printing technique. Moreover, enhance the performance of electrical conductivity by electroless plating and electroplating techniques. The study was separated into two parts. Firstly, optimize the mass ratio between graphite and polyvinylidene fluoride (PVDF). In prepared ink from varied mass ratio; 2.0:0.1, 2:0.2, and 2:0.3 respectively. Volume resistivity analysis of conductive patterns, it was found that the mass ratio between graphite and PVDF of 2: 0.2 provided the lowest volume resistivity of 0.0122 Ω-m. In other cases, the mass …

Study Of Interactions Between Magnesium Silicate Particle And Diamond-Like Carbon Using Atomic Force Microscopy, Vipada Dokmai

Chulalongkorn University Theses and Dissertations (Chula ETD)

Interaction between particles and different surfaces under ambient condition is studied using AFM-based force spectroscopy. This work focuses on the adhesion mechanism and factors affecting particle-surface adhesion. The particles of interest consist of magnesium silicate (talcum powder) and zinc oxide (ZnO) particles, which have very attractive properties and are widely used in several applications. The adhesion force measurements were first carried out using silicon/silicon coated with DLC probes pressed on talc particles modified with hydrochloric acid or different organosilanes. These modifications change hydrophobicity and hydrophilicity of the particles. The results show that the adhesion forces are distributed in a bimodal …

Fundamental Study Of Supported Metal Catalysts Prepared By Metal In Lithium Solution For Energy Science, Haiping Xu

Graduate Research Theses & Dissertations

Electrochemical carbon dioxide reduction reaction (CO2RR) is a promising technique for energy conversion and storage from intermittent electricity sources (ie. wind and solar). By coupling electrochemical CO2 reduction (CO2R) to a renewable energy source atmospheric CO2 could be converted back into a fuel such as ethanol, or a commodity chemical such as ethanol or acetic acid. These products could then be consumed for energy or used to generate more valuable chemical products effectively removing CO2 from the atmosphere. To commercialize this process, it is highly desired to prepare catalysts that selectively reduce CO2 at low overpotential with long durability. Research …

Ni-Au Anodic Nano-Electrocatalyst For Direct Glucose Fuel Cells, Islam M. Al-Akraa, Aya S. Abdulhalim Eng, Yassr M. Asal Mr, Ahmad M. Mohammad Prof

Chemical Engineering

This study aims at the sequential assembling of a nickel oxide (NiOx: cauliflower-like nanostructure, 90 nm) and gold (Au; spherical, 95 nm in an average particle size) onto the GC surface nanocatalyst on a glassy carbon (GC) electrode (will be abbreviated as Ni-Au/GC) for the glucose electro−oxidation (GO); the principal anodic reaction in the direct glucose fuel cells (DGFCs). The charge of the Ni deposition on the GC surface (will be abbreviated as Ni/GC electrode) was initially optimized to obtain the highest catalytic activity toward GO which attained at (339.8 Ag−1) by applying 15 mC in the Ni deposition. Yet, …