Bioresource and Agricultural Engineering Commons^™

Response Of Soybean To Variable Irrigation Levels In Eastern Nebraska Using The Aquacrop Model, Anmol Singh

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

AquaCrop was calibrated and validated for soybean [Glycine max (L.) Merr.] using 19 irrigation treatments from five years using data from field experiments. The model accurately simulated canopy cover (CC), soil water content (SWC), and grain yield, with overall validation nRMSE values of 12%, 7%, and 7%, respectively. The overall validation nRMSE for SWC in individual 30-cm soil layers was comparatively higher, at 19%. The model was subsequently applied for long-term simulations (2010–2024) to estimate soybean yield and water requirements for two dominant soil types, Yutan silty clay loam and Tomek silt loam under three irrigation levels - rainfed, …

Field Calibration Of A Time Domain Reflectometry Sensor For Water Content Measurement In Soils With Low Content Of Coarse Fragments, Rehnuma Maisha, Dean Steele, Aaron L. M. Daigh, Derek M. Heeren, Trenton E. Franz

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Comparison of soil water sensors for irrigation scheduling requires an accurate reference measurement. An Acclima TDR-310H soil water content sensor was calibrated and validated for sand, loamy sand, clay loam, sandy clay loam, and sandy loam soils. In 2021, sensor readings and soil samples were collected in the same sensor volume at depths of 15 and 46 cm at three irrigated field sites with five stations each. Gravimetric water content, bulk density, and volumetric water content (θv) were determined in the lab. The root mean square error was 0.032 cm³ cm⁻³, which was within acceptable limits. The …

Irrigation Pumping Plants: Energy Consumption And Pumping Plant Performance [Class Handout], Derek M. Heeren, Saleh Taghvaeian, Abia Katimbo, Xin Qiao

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Irrigation can be a large contributor to energy consumption on an irrigated farm. It is important to understand factors that impact irrigation energy use and to identify opportunities to reduce energy consumption. This class handout introduces a set of equations for calculating energy consumption for an irrigation pumping plant based on flow conditions and pump efficiency. It also presents typical values for motor performance (including both electric motors and internal combustion engines) in both SI and USCS units. Finally, the handout introduces the concept of a field evaluation of an irrigation pumping plant along with the Nebraska Pumping Plant Performance …

Impact Of Irrigation On Vulnerability Of Winter Wheat Under Extreme Climate Change Scenario: A Case Study Of North China Plain, Yulian Gao, Lin Wang, Yaojie Yue

Department of Agricultural and Biological Systems Engineering: Faculty Publications

An inadequate understanding of the impacts of adaptation countermeasures tends to exaggerate the adverse e􀀀ects of climate change on agricultural systems. Motivated by proposing reasonable climate change adaptation countermeasures, the present study applied the EPIC model to quantify the impacts of climate change and irrigation changes with future socioeconomic development on agricultural production. Winter wheat yield losses using dynamic irrigation parameters in the North China Plain (NCP) from 2010 to 2099 under a scenario coupling climate change and future socioeconomic development (RCP8.5-SSP3), and those under an extreme climate change scenario (RCP8.5), were simulated. Results show that EPIC model demonstrates superior …

Development Of A Machine Learning System For Irrigation Decision Support With Disparate Data Streams, Eric Wilkening

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

In recent years, advancements in irrigation technologies have led to increased efficiency in irrigation applications, encompassing the adoption of practices that utilize data-driven irrigation scheduling and leveraging variable rate irrigation (VRI). These technological improvements have the potential to reduce water withdrawals and diversions from both groundwater and surface water sources. However, it is vital to recognize that improved application efficiency does not necessarily equate to increased water availability for future or downstream use. This is particularly crucial in the context of consumptive water use, which refers to water consumed and not returned to the local or sub-regional watershed, representing a …

Examining The Benefits Of Using Rainfall To Supplement Alternate Wetting And Drying Irrigation In Zero-Grade Rice Fields In Central Arkansas, Leo Black

Biological and Agricultural Engineering Undergraduate Honors Theses

Arkansas farmers account for more than 50% of United States production of rice, a crop that requires 3 to 5 times as much water as other regional crops. Methods of reducing water use and increasing its efficiency are being explored throughout the rice production industry, including irrigation management, better land grading, and precipitation capture. This project investigates the combination of these methods. The objectives of this project were to assess field-level water inputs, identify relationships between rice growth and water input, and analyze weather patterns in zero-grade fields in central Arkansas. Subsequent results were used to determine if there is …

A Graduate-Level Field Course In Irrigation And Agricultural Water Management For An Immersive Learning Experience, Derek M. Heeren, László G. Hayde, Dean Eisenhauer, Peter G. Mccornick, Ali T. Mohammed, Aaron R. Mittelstet, Alan L. Boldt, Xin Qiao, David Mabie, Francisco Muñoz-Arriola

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Effective irrigation and agricultural water management (IAWM) is critical for food security and water security. A key requirement in designing, implementing and operation of IWM is the necessary knowledge and capacity on the farm, in the service industry and within the supply chain. Educational opportunities that not only teach the relevant principles of irrigated agriculture, but also the necessary applied skills are essential. An Irrigation Field Course was initiated by the IHE Delft Institute for Water Education (IHE Delft) and was later developed as a joint field course with IHE Delft, the University of Nebraska-Lincoln (UNL), and the Daugherty Water …

Crop Response To Thermal Stress Without Yield Loss In Irrigated Maize And Soybean In Nebraska, Sandeep Bhatti, Derek M. Heeren, Steven R. Evett, Susan A. O'Shaughnessy, Daran Rudnick, Trenton E. Franz, Yufeng Ge, Christopher M.U. Neale

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Thermal sensing provides rapid and accurate estimation of crop water stress through canopy temperature data. Canopy temperature is highly dependent on the transpiration rate of the leaves. It is usually assumed that any reduction in crop evapotranspiration (ET) leads to crop yield loss. As a result, an increase in canopy temperature due to a decrease in crop ET would indicate crop yield loss. This research evaluated the hypothesis that crop water stress could be detected using canopy temperature measurements (increased leaf temperature) from infrared thermometers (IRTs) before incurring crop yield loss. This would be possible in a narrow range when …

The Effect Of Water Management And Ratoon Rice Cropping On Methane Emissions And Harvest Yield In Arkansas, Marguerita Leavitt

Graduate Theses and Dissertations

Sustainable intensification of rice farming is crucial to meeting human food needs while reducing environmental impacts. Rice produces 8% of all anthropogenic CH4, which is a potent greenhouse gas. CH4 emissions can potentially be reduced by cultivation practices that minimize the number of days the fields are saturated, such as dry-seeding instead of water-seeding and irrigation using the alternate wetting and drying (AWD) technique instead of delayed, continuous flooding (DF). Ratoon cropping, wherein a second crop of rice is grown from the harvested stubble of the first crop, can be used to produce additional yield with minimal labor, but may …

Comparison Of Stationary And Mobile Canopy Sensing Systems For Irrigation Management Of Maize And Soybean In Nebraska, Sandeep Bhatti, Derek M. Heeren, Susan A. O’Shaughnessy, Steven R. Evett, Mitchell S Maguire, Suresh Pradhyun Kashyap, Christopher M. U. Neale

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Accurate knowledge of plant and field characteristics is crucial for irrigation management. Irrigation can potentially be better managed by utilizing data collected from various sensors installed on different platforms. The accuracy and repeatability of each data source are important considerations when selecting a sensing system suitable for irrigation management. The objective of this study was to compare data from multispectral (red and near-infrared bands) and thermal (long wave thermal infrared band) sensors mounted on different platforms to investigate their comparative usability and accuracy. The different sensor platforms included stationary posts fixed on the ground, the lateral of a center pivot …

High-Frequency Unmanned Aircraft Flights For Crop Canopy Imaging During Diurnal Moisture Stress, Suresh Pradhyun Kashyap

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Previous research has used unmanned aerial vehicle (UAV) technology for calculating CWSI (Crop Water Stress Index) values in the context of irrigation scheduling. Typically, these estimations were taken at one time of day, usually near shortly after solar noon. A significant limitation with these CWSI values is that the UAV thermal imagery captured at this point in time can be affected by various factors like atmospheric air temperature, solar radiation, wind speed, relative humidity, and other micrometeorological disturbances in the air. In order to address these temporal effects, high-frequency UAV flights were conducted over different daylight hours to analyze and …

Inter-Relationships Between Water Depletion And Temperature Differential In Row Crop Canopies In A Sub-Humid Climate, Jasreman Singh, Yufeng Ge, Derek M. Heeren, Elizabeth Walter-Shea, Christopher M.U. Neale, Suat Irmak, Wayne Woldt, Geng Bai, Sandeep Bhatti, Mitchell S. Maguire

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Irrigation has a great impact on global food security as it contributes to the majority of the world’s agricultural food supply. It is essential to judiciously utilize water resources through efficient irrigation management since the majority of U.S. groundwater aquifers are rapidly depleting. Thus, quantification of the relationships between water depletion and environmental factors is important for understanding crop response to varying levels of water stresses that depletion can cause. The objectives of this research were to: 1) investigate the relationship between root zone water depletion (D_rw) and canopy temperature differential (ΔT) at different ranges of D_{rw …}

Leveraging Unmanned Aerial System Remote Sensing To Inform Energy And Water Balance Models For Spatial Soil Water Content Monitoring And Irrigation Management, Mitchell S. Maguire

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Irrigation has provided a means to produce more food and fiber throughout the world, converting low producing land into high yielding cropping systems in certain scenarios. The managing of irrigation has taken on various approaches as different locations have been constrained by different factors. Certain areas have significant ground and surface water available for irrigation while other areas struggle to meet irrigation demands due to limited water resources. These factors, along with the desire to increase crop water use efficiency, has provided the motivation to better understand crop water demands spatially within a field. A sub-field scale irrigation management study …

Center Pivot Project Specifications, Charles M. Burt

BioResource and Agricultural Engineering

This note provides an example of items that are included in a specification for center pivots. It is a supplement to design drawings that have numerous additional details. This example combines items from various ITRC jobs, and therefore the units are not consistent (there is a mix of metric and English units). The intention, however, is not to provide a precise specification that can be replicated, but rather to show the key items that are typically included.

In such projects, there are two primary sets of specifications:

• The details of the center pivots themselves and warranties for the pivots
• The …

Estimating Irrigation In Rice Fields With A Water Balance Approach, Kristen Trinh

Biological and Agricultural Engineering Undergraduate Honors Theses

Global food production must increase to meet the demand associated with increased population growth, so irrigation water use will continue to rise. Therefore, it is important to monitor water usage particularly when an irrigation flowmeter is unavailable. A field water balance was created for a selection of rice fields in East-central Arkansas under observation in 2018 and 2019. From those, irrigation inputs are deduced from the water balance alone. First, each field had sensors that collected water table level (WTL) data. Next, other water inputs and outputs such as precipitation and evapotranspiration (ET) were collected from two modeled sources. The …

Field Evaluation Of Non-Contact Flow Measurement Device - Pid, Jack Evans, Stuart Styles

BioResource and Agricultural Engineering

The Irrigation Training and Research Center (ITRC) has analyzed the data from several non-contact volumetric flow meter models under various conditions. This testing was done with support from technical services contracts with the California Department of Water Resources (DWR) and the United States Bureau of Reclamation (USBR).

Field Evaluation Of Non-Contact Flow Measurement Devices - Gcid, Jack Evans, Stuart Styles

BioResource and Agricultural Engineering

The Irrigation Training and Research Center (ITRC) has analyzed the data from several non-contact volumetric flow meter models under various conditions. This testing was done with support from technical services contracts with the California Department of Water Resources (DWR) and the United States Bureau of Reclamation (USBR).

Field Evaluation Of Non-Contact Flow Measurement Device - Bcid, Jack Evans, Stuart Styles

BioResource and Agricultural Engineering

The Irrigation Training and Research Center (ITRC) is currently testing several non-contact volumetric flow meter models under their technical services contracts with the California Department of Water Resources (DWR) and the United States Bureau of Reclamation (USBR). In April 2020, a Sommer RQ-30A non-contact flow meter was installed at Banta Carbona Irrigation Districts (BCID) Main Canal approximately 180 ft downstream of the discharge from Pumping Plant 1. The meter was mounted at midspan along a footbridge that crosses the throat of an ITRC designed subcritical contraction structure (see Figure 1). An existing SonTek Acoustic Doppler Flow Meter (ADFM) was installed …

Performance Of Non-Contact Flow Meters In Irrigation Canals And Surface Drains, Kyle Feist, Jack Evans, Zack Markow, Stuart Styles

BioResource and Agricultural Engineering

Flow measurement is an important component of modern irrigation delivery systems. As irrigation projects are modernized, flow measurement devices are being installed in more non-traditional applications. Some applications feature a combination of characteristics that eliminate traditional flow measurement structures. Furthermore, as regulations obligate more districts to report real time diversions, redundant flow measurement devices using different methods or technologies become necessary to reduce the potential for temporary gaps in diversion data. In these cases, non-contact type flow measurement devices may be of interest. Two non-contact flow meters were installed at different irrigation district canals. Data was collected from the non-contact …

Common Unit Conversions For Irrigation, Dean E. Eisenhauer, Derrel L. Martin, Derek M. Heeren, Glenn J. Hoffman

Open Learning Resources, General/Selected

A fact sheet that includes common unit conversions for irrigation in international system of units (SI) and United States customary system of units (USCS).

Includes units for: length, area, volume, flow, weight and mass, pressure, crop yield, temperature, and the United States public land survey system.

Testing Of Two 10-Inch Insertion Propeller Flow Meters, Stuart Styles, Sierra Layous, Jack Evans

BioResource and Agricultural Engineering

With funding from the US Bureau of Reclamation, California – Great Basin Region (Region 10), the Cal Poly Irrigation Training & Research Center (ITRC) conducted flow measurement accuracy testing on two 10-inch insertion (strap-on saddle) McCrometer Water Specialties propeller flow meters. Both meters were new and recently purchased by Westlands Water District. One of the meters is shown in Figure 1. Testing was performed at the ITRC Water Resources Facility (WRF) using the ITRC volumetric tank as the standard flow rate measurement for all tests. The ITRC volumetric tank was calibrated with the NIST¹-traceable ITRC gravimetric tank using …

Testing Of Two 10-Inch Insertion Magnetic Flow Meters, Stuart Styles, Sierra Layous, Jack Evans

BioResource and Agricultural Engineering

With funding from the US Bureau of Reclamation, California – Great Basin Region (Region 10), the Cal Poly Irrigation Training & Research Center (ITRC) conducted flow measurement accuracy testing on two 10-inch insertion (saddle-mount) McCrometer Mc Mag3000 magnetic flow meters. The meters were two of 360 new meters that were purchased by Westlands Water District. One of the meters is shown in Figure 1. Testing was performed at the ITRC Water Resources Facility (WRF) using the ITRC gravimetric (weigh) tank as the standard flow rate measurement for all tests. The ITRC gravimetric tank has a NIST¹-traceable uncertainty of …

Magnetic Flow Meter Testing, Stuart Styles, Sierra Layous, Jack Evans

BioResource and Agricultural Engineering

With funding from the US Bureau of Reclamation, California – Great Basin Region (Region 10) and the California Department of Water Resources (Agreement No. 4600011908), the California Polytechnic State University, San Luis Obispo Irrigation Training & Research Center (ITRC) conducted testing on 4-inch and 10-inch spool-type magnetic flow meters ( also known as mag meters and electromagnetic flow meters) from six manufacturers (12 meters total). The testing was performed to assess the effects of various hydraulic conditions on meter accuracy.

Testing Of A 10 To 48-Inch Insertion Magnetic Flow Meter, Stuart Styles, Jack Evans, Sierra Layous, Chad Tenbrink

BioResource and Agricultural Engineering

With funding from the US Bureau of Reclamation, California – Great Basin Region (Region 10), the Cal Poly Irrigation Training & Research Center (ITRC) conducted flow measurement testing on one (1×) 10 to 48-inch Seametrics EX21x insertion magnetic meter (“Seametrics”, “test meter”) in April 2020. Figure 1 shows the meter installed at the testing facility. The testing determined the accuracy of the test meter in a straight pipe configuration across a range of typical water velocities (0.5 to 5.8 feet per second). Testing was performed at the ITRC Water Resources Facility (WRF) using calibrated measurements from a 30-inch Krohne Enviromag …

Magnetic Flow Meter Testing And The Effect Of Upstream Chemical Injection On Meter Performance, Stuart Styles, Sierra Layous, Jack Evans

BioResource and Agricultural Engineering

With funding from the US Bureau of Reclamation, California – Great Basin Region (Region 10), the Cal Poly Irrigation Training & Research Center (ITRC) performed testing on magnetic flow meters to examine issues related to upstream chemical injection. Two sets of tests were completed:

• Meter Accuracy Testing – This testing determined the flow measurement accuracy of ten (10×) meters. Previously, all the meters had been installed in irrigation pipelines immediately downstream of chemical injection and showed significant fluctuations in flow measurement readings.

• Upstream Chemical Injection Testing – This testing quantified the variability of flow rate measurements at various …

Testing Of Two 30-Inch Magnetic Flow Meters, Stuart Styles, Jack Evans, Sierra Layous, Chad Tenbrink

BioResource and Agricultural Engineering

With funding from the US Bureau of Reclamation, California – Great Basin Region (Region 10), the Cal Poly Irrigation Training & Research Center (ITRC) conducted flow measurement testing on two (2×) 30inch spool-type magnetic flow meters in March of 2020. Figure 1 shows the meters installed at the testing facility. The testing determined the accuracy for each test meter in a straight pipe configuration across a range of typical water velocities (0.4 to 3.8 feet per second). Testing was performed at the ITRC Water Resources Facility (WRF) using the ITRC volumetric tank as the standard flow rate measurement for all …

Design And Testing Of A Multi-Depth Soil Temperature Sensor Array Intended As A Candidate Irrigation Scheduling Tool, Lillian Glaeser

Biological and Agricultural Engineering Undergraduate Honors Theses

A crucial measure in the advancement of water conservation and sustainable agricultural strategies is increasing efficiencies of irrigation systems. Because of the lack of availability of affordable, durable, and scalable soil moisture monitoring devices, this thesis proposes a low-cost, multi-depth soil temperature sensor array as a candidate for monitoring soil moisture content and guiding farmer’s irrigation scheduling. Propagation of diurnal temperature waves through soil is dependent on the thermal diffusivity of the soil, which can be determined by examining temperature waves at different soil depths. Thermal diffusivity is dependent on several factors, though, in undisturbed soil, water has the largest …

Overview And Uncertainty Analysis For An Irrigation Flow Measurement Facility, Kyle Feist, Zachary Markow, Stuart Styles

BioResource and Agricultural Engineering

Accurate flow measurement is critical for modern water resource management. At the irrigation district level, instantaneous flow rates must be well-measured at key bifurcation points to reliably meet downstream demand in open channel systems while also minimizing diversions. Furthermore, good flow measurement at each delivery point is a pre-requisite for successful volumetric water billing. Accuracy and repeatability are important characteristics of good flow measurement. Maximizing these traits requires periodic calibration to a common standard.

This paper presents an overview of calibration efforts and the engineering background behind an active flow measurement facility at the Irrigation Training and Research Center at …

Flow Rate Equation For Suppressed And Submerged Sluice Gates, Charles M. Burt, Albert J. Clemmens, Kyle Fesit

BioResource and Agricultural Engineering

In irrigation projects, the control and measurement of flow rates at key bifurcation points is essential. Sluice gates at the heads of irrigation canals are used by operators to control the flow into these canals. In US irrigation districts, canal operators often estimate flow rate at the heads of canals by “experience” unless they have a flume downstream. For example, they may open a gate a certain number of turns for a change in flow rate, regardless of upstream and downstream conditions. Theoretical estimates of discharge are often inaccurate in field situations. Problems include varying and uncertain discharge coefficients, entrance …

Using Infrared Radiometry Thermometer For Irrigation Management Of Dry Edible Beans In Western Nebraska, Isabella Presotto Possignolo

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Proper irrigation management requires farmers to determine the right timing and amount to irrigate. Soil water sensors are one of the most popular sensor-based approach used by farmers to decide when and how much to irrigate. However, installation and retrieval of soil water sensors require excavation of soil and can be challenging. Other than soil water sensors, there are plant-based water stress monitoring technologies that are less soil disturbing such as infrared radiometry thermometer (IRT). Using canopy temperature measured from IRT, researchers can calculate thermal-based indices such as crop water stress index (CWSI) for many crops around the world. Yet …