Open Access. Powered by Scholars. Published by Universities.®

Bioresource and Agricultural Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Biosystems and Agricultural Engineering Faculty Publications

Discipline
Keyword
Publication Year

Articles 61 - 90 of 259

Full-Text Articles in Bioresource and Agricultural Engineering

Equilibrium Moisture Content Of Kabuli, Chickpea, Black Sesame, And White Sesame Seeds, Paul R. Armstrong, Elizabeth B. Maghirang, Bhadriraju Subramanyam, Samuel G. Mcneill Jan 2017

Equilibrium Moisture Content Of Kabuli, Chickpea, Black Sesame, And White Sesame Seeds, Paul R. Armstrong, Elizabeth B. Maghirang, Bhadriraju Subramanyam, Samuel G. Mcneill

Biosystems and Agricultural Engineering Faculty Publications

Sesame and chickpea are important crops in Ethiopia because both are major export crops that generate much revenue for both small farmers and the country as a whole. However, there is a lack of information about the fundamental equilibrium moisture content (EMC) relationships among these crops, which would help facilitate better monitoring and storage. Therefore, EMC adsorption and desorption prediction models based on temperature (T) and relative humidity (RH) were developed for the modified Chung-Pfost and modified Henderson models for Kabuli chickpea (KC), black sesame (BS), and white sesame (WS) seeds. The samples for conducting the adsorption and desorption tests …

Go to article

Toward Biochemical Conversion Of Lignocellulose On-Farm: Pretreatment And Hydrolysis Of Corn Stover In Situ, Alicia A. Modenbach, Sue E. Nokes, Michael D. Montross, Barbara L. Knutson Jan 2017

Toward Biochemical Conversion Of Lignocellulose On-Farm: Pretreatment And Hydrolysis Of Corn Stover In Situ, Alicia A. Modenbach, Sue E. Nokes, Michael D. Montross, Barbara L. Knutson

Biosystems and Agricultural Engineering Faculty Publications

High-solids lignocellulosic pretreatment using NaOH followed by high-solids enzymatic hydrolysis was evaluated for an on-farm biochemical conversion process. Increasing the solids loadings for these processes has the potential for increasing glucose concentrations and downstream ethanol production; however, sequential processing at high-solids loading similar to an on-farm cellulose conversion system has not been studied. This research quantified the effects of high-solids pretreatment with NaOH and subsequent high-solids enzymatic hydrolysis on cellulose conversion. As expected, conversion efficiency was reduced; however, the highest glucose concentration (40.2 g L-1), and therefore the highest potential ethanol concentration, resulted from the high-solids combined pretreatment …

Go to article

The Confounding Effects Of Particle Size And Substrate Bulk Density On Phanerochaete Chrysosporium Pretreatment On Panicum Virgatum, Amanda N. Hickman, Sue E. Nokes, William S. Sympson, Mathew J. Ruwaya, Michael D. Montross, Barbara L. Knutson Jul 2016

The Confounding Effects Of Particle Size And Substrate Bulk Density On Phanerochaete Chrysosporium Pretreatment On Panicum Virgatum, Amanda N. Hickman, Sue E. Nokes, William S. Sympson, Mathew J. Ruwaya, Michael D. Montross, Barbara L. Knutson

Biosystems and Agricultural Engineering Faculty Publications

Phanerochaete chrysosporium treatment is less effective as a biological pretreatment on feedstock with larger particle sizes. We hypothesized that the improved effectiveness of the pretreatment when smaller particle sizes are used may be due to the inherently higher bulk density with smaller particle sizes. The effects of substrate bulk density and particle size on the efficacy of P. chrysosporium pretreatment of switchgrass (Panicum virgatum) was tested experimentally. Phanerochaete chrysosporium was grown on senesced switchgrass (2 different particle sizes) with various bulk densities. In all treatments, the fungal-pretreated samples released more glucose during enzymatic saccharification than the control sample. …

Go to article

Physicochemical And Functional Properties Of Extruded Sorghum‐Based Bean Analog, Akinbode A. Adedeji, Michael V. Joseph, Brian Platter, Sajid Alavi Jul 2016

Physicochemical And Functional Properties Of Extruded Sorghum‐Based Bean Analog, Akinbode A. Adedeji, Michael V. Joseph, Brian Platter, Sajid Alavi

Biosystems and Agricultural Engineering Faculty Publications

The objective of this study was to develop and evaluate the physicochemical and functional properties of a bean like product made from cold extrusion of sorghum, soy and wheat flours. Formulated samples comprised of sorghum (25–70%), wheat (0–35%) and soy (30–50%) flours. The degree of gelatinization ranged from 54.1 to 93.6%. Pasting curves showed minimal starch damage with peak and final viscosities in the range of 456.0–1138.5 and 297–584 cP, respectively. Textural properties of the extrudates were significantly impacted by starch content and cooking time. There was significant cooking loss due to poor binding properties of the extrudates. Cooking the …

Go to article

Mobile Device-Based Location Services Accuracy, Hasan Seyyedhasani, Joseph S. Dvorak, Michael P. Sama, Tim S. Stombaugh May 2016

Mobile Device-Based Location Services Accuracy, Hasan Seyyedhasani, Joseph S. Dvorak, Michael P. Sama, Tim S. Stombaugh

Biosystems and Agricultural Engineering Faculty Publications

The objective of this study was to characterize the expected position accuracy when using popular mobile devices for location-based agricultural decision-making activities. This study utilized Android-based Nexus 7 tablets and tested the operation of the three location services available on this system in a 24-h fixed location test and a shorter duration multiple location field test. In the 24-h test, the “network” location system had a measured error of 37.19 m while reporting an accuracy of 55.56 m. The “gps” location system had a measured error of 2.57 m and a reported accuracy of 3.20 m. Multiple tests were conducted …

Go to article

Wet Grain Delivery Advice: A Previously Impossible Extension Challenge Solved Through App Technology, Joseph S. Dvorak, Sam Mcneill, Clint Hardy Apr 2016

Wet Grain Delivery Advice: A Previously Impossible Extension Challenge Solved Through App Technology, Joseph S. Dvorak, Sam Mcneill, Clint Hardy

Biosystems and Agricultural Engineering Faculty Publications

The delivery of wet grain during harvest is a complex and constantly changing problem about which Extension professionals have been unable to offer more than general advice. By capitalizing on important characteristics of mobile devices, a new app enables producers to fully benefit from detailed information universities have generated on grain drying and costs associated with delivery of grain to different locales. Development of such an app demonstrates the power of apps and mobile devices in allowing Extension to deliver previously unattainable services to its clientele.

Go to article

Application Of Recycled Media And Algae-Based Anaerobic Digestate In Scenedesmus Cultivation, Xinyi E, Czarena Crofcheck, Mark Crocker Feb 2016

Application Of Recycled Media And Algae-Based Anaerobic Digestate In Scenedesmus Cultivation, Xinyi E, Czarena Crofcheck, Mark Crocker

Biosystems and Agricultural Engineering Faculty Publications

To make large-algae cultivation systems sustainable, commercial fertilizer inputs should be minimized. One means of achieving this is to maximize the recycle of nutrients used in algae cultivation. In addition to recycling nutrient-containing water from algae harvesting and dewatering, after harvesting algal biomass can be used as a substrate for anaerobic digestion, which can then generate mineralized nutrients to be used for further cultivation. In this study, the effect of recycling media and using mineralized nutrients during Scenedesmus cultivation was investigated. The recycled media proved to be able to support cell growth with nutrient replenishment, and it could be recycled …

Go to article

Long-Term Trend Analysis Of Precipitation And Air Temperature For Kentucky, United States, Somsubhra Chattopadhyay, Dwayne R. Edwards Feb 2016

Long-Term Trend Analysis Of Precipitation And Air Temperature For Kentucky, United States, Somsubhra Chattopadhyay, Dwayne R. Edwards

Biosystems and Agricultural Engineering Faculty Publications

Variation in quantities such as precipitation and temperature is often assessed by detecting and characterizing trends in available meteorological data. The objective of this study was to determine the long-term trends in annual precipitation and mean annual air temperature for the state of Kentucky. Non-parametric statistical tests were applied to homogenized and (as needed) pre-whitened annual series of precipitation and mean air temperature during 1950–2010. Significant trends in annual precipitation were detected (both positive, averaging 4.1 mm/year) for only two of the 60 precipitation-homogenous weather stations (Calloway and Carlisle counties in rural western Kentucky). Only three of the 42 temperature-homogenous …

Go to article

Switchgrass (Panicum Virgatum) Fermentation By Clostridium Thermocellum And Clostridium Saccharoperbutylacetonicum Sequential Culture In A Continuous Flow Reactor, Noelia M. Elia, Sue E. Nokes, Michael D. Flythe Jan 2016

Switchgrass (Panicum Virgatum) Fermentation By Clostridium Thermocellum And Clostridium Saccharoperbutylacetonicum Sequential Culture In A Continuous Flow Reactor, Noelia M. Elia, Sue E. Nokes, Michael D. Flythe

Biosystems and Agricultural Engineering Faculty Publications

The study was conducted to evaluate fermentation by Clostridium thermocellum and C. saccharoperbutylacetonicum in a continuous-flow, high-solids reactor. Liquid medium was continuously flowed through switchgrass (2 mm particle size) at one of three flow rates: 83.33 mL h−1 (2 L d−1), 41.66 mL h−1 (1 L d−1), and 20.833 mL h−1 (0.5 L d−1). The cellulolytic phase was initiated by culturing C. thermocellum (63 °C, 24 h). The temperature was decreased (35) and C. saccharoperbutylacetonicum was inoculated. When metabolism decreased (96 h), the temperature was increased (63 °C; 24 h) …

Go to article

Modeling The Compressibility Behavior Of Hard Red Wheat Varieties, Aaron P. Turner, Michael D. Montross, Samuel G. Mcneill, Michael P. Sama, Mark E. Casada, Josephine M. Boac, Rumela Bhadra, Ronaldo G. Maghirang, Sidney A. Thompson Jan 2016

Modeling The Compressibility Behavior Of Hard Red Wheat Varieties, Aaron P. Turner, Michael D. Montross, Samuel G. Mcneill, Michael P. Sama, Mark E. Casada, Josephine M. Boac, Rumela Bhadra, Ronaldo G. Maghirang, Sidney A. Thompson

Biosystems and Agricultural Engineering Faculty Publications

The bulk density of grain in a storage structure varies vertically and horizontally due to the overburden pressure created by the cumulative weight of the overlying material. As the overburden pressure increases, the stored material compacts. This compaction is believed to be caused by rearrangement of kernels along with higher intergranular stress between particles, leading to kernel deformation. This compaction is of primary concern when estimating the amount of grain in a storage structure. In this comprehensive study, confined uniaxial compression tests were conducted on 27 different samples of hard red winter wheat, at three moisture levels, over the range …

Go to article

Error Analysis Of Stored Grain Inventory Determination, Aaron P. Turner, Michael D. Montross, Joshua J. Jackson, Samuel G. Mcneill, Mark E. Casada, Josephine M. Boac, Rumela Bhadra, Ronaldo G. Maghirang, Sidney A. Thompson Jan 2016

Error Analysis Of Stored Grain Inventory Determination, Aaron P. Turner, Michael D. Montross, Joshua J. Jackson, Samuel G. Mcneill, Mark E. Casada, Josephine M. Boac, Rumela Bhadra, Ronaldo G. Maghirang, Sidney A. Thompson

Biosystems and Agricultural Engineering Faculty Publications

Estimation of the quantity of stored grain is important for crop insurance, financial statements, and inventory control. Traditionally, the height of grain has been measured using weighted tape measures, and the volume is subsequently computed using standard geometric shapes (cylinders and cones) along with visual correction of the grain surface. Field measurements by four trained USDA Farm Service Agency and crop insurance agents on older farm-sized bins (8.2 to 11.0 m, or 27 to 36 ft, in diameter) resulted in standard deviations between 0.02 and 0.30 m for the equivalent height when the grain surface was not level. The largest …

Go to article

Correlating Bulk Density (With Dockage) And Test Weight (Without Dockage) For Wheat Samples, Rumela Bhadra, Mark E. Casada, Josephine M. Boac, Aaron P. Turner, Sidney A. Thompson, Michael D. Montross, Ronaldo G. Maghirang, Samuel G. Mcneill Jan 2016

Correlating Bulk Density (With Dockage) And Test Weight (Without Dockage) For Wheat Samples, Rumela Bhadra, Mark E. Casada, Josephine M. Boac, Aaron P. Turner, Sidney A. Thompson, Michael D. Montross, Ronaldo G. Maghirang, Samuel G. Mcneill

Biosystems and Agricultural Engineering Faculty Publications

In grain bins, the compaction of stored grain is caused by the overbearing pressure of the bulk material in the bin. To predict the amount of grain in the bin, compaction values must be determined based on the average bulk density (BD) of the stored material. However, BD is determined following the Federal Grain Inspection Service (FGIS) guidelines for measuring test weight (TW), which require that dockage be removed prior to measuring wheat TW. Thus, this creates a problem for predicting grain compaction and conducting inventory studies, because the average BD of the grain in a bin for these calculations …

Go to article

As-Applied Estimation Of Volumetric Flow Rate From A Single Sprayer Nozzle Series Using Water-Sensitive Spray Cards, Michael P. Sama, John T. Evans, Aaron P. Turner, Surya Saket Dasika Jan 2016

As-Applied Estimation Of Volumetric Flow Rate From A Single Sprayer Nozzle Series Using Water-Sensitive Spray Cards, Michael P. Sama, John T. Evans, Aaron P. Turner, Surya Saket Dasika

Biosystems and Agricultural Engineering Faculty Publications

The objective of this study was to test the feasibility of using coverage measurements from water-sensitive spray cards to estimate the volumetric flow rate at an individual sprayer nozzle. TeeJet VisiFlow Even Flat Spray Tips were selected due to their uniform distribution of coverage. Spray distribution for each nozzle was validated using a spray patternator table with 2.5 cm sampling widths. A rotary test fixture translated water-sensitive spray cards through the spray dispersion (water at ambient conditions) at a constant angular velocity and a radius of 1.2 m. The test fixture measured volumetric flow and pressure at the nozzle and …

Go to article

A Review Of Non-Destructive Methods For Detection Of Insect Infestation In Fruits And Vegetables, Nader Ekramirad, Akinbode A. Adedeji, Reza Alimardani Jan 2016

A Review Of Non-Destructive Methods For Detection Of Insect Infestation In Fruits And Vegetables, Nader Ekramirad, Akinbode A. Adedeji, Reza Alimardani

Biosystems and Agricultural Engineering Faculty Publications

Insect damage in fruits and vegetables cause major production and economic losses in the agriculture and food industry worldwide. Monitoring of internal quality and detection of insect infestation in fruits and vegetables is critical for sustainable agriculture. Early detection of an infestation in fruits can facilitate the control of insects and the quarantine operations through proper post-harvest management strategies and can improve productivity. The present review recognizes the need for developing a rapid, cost-effective, and reliable insect infestation monitoring system that would lead to advancements in agriculture and food industry. In this paper, an overview of non-destructive detection insect damages …

Go to article

Nozzle Sensor For In-System Chemical Concentration Monitoring, Joseph S. Dvorak, Timothy S. Stombaugh, Yongbo Wan Jan 2016

Nozzle Sensor For In-System Chemical Concentration Monitoring, Joseph S. Dvorak, Timothy S. Stombaugh, Yongbo Wan

Biosystems and Agricultural Engineering Faculty Publications

Chemical concentration is a vital parameter for determining appropriate chemical application. This study describes the design and testing of a sensor that attempted to monitor concentration of chemicals upstream from each nozzle body. The sensor is based on an LED and photodiode pair. Its ability to detect chemical concentration within the main carrier was tested with a 2,4-D formulation, a glyphosate formulation, and a powdered Acid Blue 9 dye. The liquid herbicide formulations of glyphosate and 2,4-D were tested across common application concentrations of 0% to 12.5% by volume. The powdered dye produced a much stronger effect on the sensor …

Go to article

Object Detection For Agricultural And Construction Environments Using An Ultrasonic Sensor, Joseph S. Dvorak, Marvin L. Stone, Kelvin P. Self Jan 2016

Object Detection For Agricultural And Construction Environments Using An Ultrasonic Sensor, Joseph S. Dvorak, Marvin L. Stone, Kelvin P. Self

Biosystems and Agricultural Engineering Faculty Publications

This study tested an ultrasonic sensor‘s ability to detect several objects commonly encountered in outdoor agricultural or construction environments: a water jug, a sheet of oriented strand board (OSB), a metal fence post, a human model, a wooden fence post, a Dracaena plant, a juniper plant, and a dog model. Tests were performed with each target object at distances from 0.01 to 3 m. Five tests were performed with each object at each location, and the sensor‘s ability to detect the object during each test was categorized as "undetected," "intermittent," "incorrect distance," "good." Rigid objects that presented a larger surface …

Go to article

Recalibration Methodology To Compensate For Changing Fluid Properties In An Individual Nozzle Direct Injection System, Joe D. Luck, Scott A. Shearer, Brian D. Luck, Michael P. Sama Jan 2016

Recalibration Methodology To Compensate For Changing Fluid Properties In An Individual Nozzle Direct Injection System, Joe D. Luck, Scott A. Shearer, Brian D. Luck, Michael P. Sama

Biosystems and Agricultural Engineering Faculty Publications

Limited advancement of direct injection pesticide application systems has been made in recent years, which has hindered further commercialization of this technology. One approach to solving the lag and mixing issues typically associated with injection-based systems is high-pressure individual nozzle injection. However, accurate monitoring of the chemical concentrate flow rate can pose a challenge due to the high pressure, low flow, and changing viscosities of the fluid. A methodology was developed for recalibrating high-pressure chemical concentrate injectors to compensate for fluid property variations and evaluate the performance of this technique for operating injectors in an open-loop configuration. Specific objectives were …

Go to article

Monitoring Yogurt Culture Fermentation And Predicting Fermentation Endpoint With Fluorescence Spectroscopy, Timothey P. Mains, Frederick Alan Payne, Michael P. Sama Jan 2016

Monitoring Yogurt Culture Fermentation And Predicting Fermentation Endpoint With Fluorescence Spectroscopy, Timothey P. Mains, Frederick Alan Payne, Michael P. Sama

Biosystems and Agricultural Engineering Faculty Publications

Determination of the endpoint of yogurt culture fermentation is a process parameter that could benefit from automation. The feasibility of using a fluorescence sensor technology based on 280 nm excitation and 350 nm emission to predict the endpoint of yogurt culture fermentation was investigated and compared with the endpoint prediction from a near-infrared (880 nm) light backscatter sensor. Yogurt cultures with three levels of milk solids (8%, 10%, and 12%) and three temperatures (40°C, 43°C, and 46°C) were tested with three replications in a 3 x 3 factorial design (n = 27). Prediction models were developed for each optical measurement …

Go to article

Wetlands And Coastal Systems: Protecting And Restoring Valuable Ecosystems, Carmen T. Agouridis, Kyle R. Douglas-Mankin, Anna C. Linhoss, Aaron R. Mittelstet Jan 2016

Wetlands And Coastal Systems: Protecting And Restoring Valuable Ecosystems, Carmen T. Agouridis, Kyle R. Douglas-Mankin, Anna C. Linhoss, Aaron R. Mittelstet

Biosystems and Agricultural Engineering Faculty Publications

Wetlands and coastal systems are unique, highly productive, and often threatened landscapes that provide a host of services to both humans and the environment. This article introduces a five-article Wetlands and Coastal Systems Special Collection that evolved from a featured session at the 2015 ASABE Annual International Meeting in New Orleans, Louisiana. The Collection provides perspectives on tools and techniques for enhancing the protection and restoration of wetlands and coastal systems with emphasis on vegetation, hydrology, water quality, and planning. Topics span the Florida Everglades (two articles) and Virginia floodplain (one article) wetland systems and include remote sensing (one article) …

Go to article

Hybrid Diesel-Electric Drivetrain For Small Agricultural Field Machines, Joseph Jackson, Joseph S. Dvorak Jan 2016

Hybrid Diesel-Electric Drivetrain For Small Agricultural Field Machines, Joseph Jackson, Joseph S. Dvorak

Biosystems and Agricultural Engineering Faculty Publications

In this project, a series electric drivetrain sized for small agricultural machinery was developed and tested. Electric drives have noted benefits in simplicity, controllability, integration with other electronics such as those that provide autonomous action, and in efficiency over a wide operating range. Their biggest drawback for agricultural use is the limited capacity of electrical energy storage. A series hybrid drivetrain provides a method to overcome these capacity constraints through the use of chemical energy storage. The series hybrid drivetrain in this research was designed using well-established components. It consisted of a diesel-electric generator, a lead acid battery pack, a …

Go to article

Using Wii Technology And Experiential Learning To Teach Newtonian Mechanics To Rural Middle School Students, Joseph S. Dvorak, Tanya C. Franke-Dvorak, Shane Neel Jan 2016

Using Wii Technology And Experiential Learning To Teach Newtonian Mechanics To Rural Middle School Students, Joseph S. Dvorak, Tanya C. Franke-Dvorak, Shane Neel

Biosystems and Agricultural Engineering Faculty Publications

This study looked at the effects of an experiential learning activity using the accelerometer in the Wii Remote to teach basic concepts of Newtonian mechanics, e.g., acceleration, to middle school students in a rural school district. A major prerequisite for students at the mid-level in biosystems engineering programs is that they have a good knowledge of basic science, including physics. Education in these concepts must begin before college, such as at the middle school level. Improvements in science education are vitally necessary to achieve essential learning outcomes for middle school students in the U.S. and to prepare these students for …

Go to article

Effects Of Chemical Amendments To Swine Manure On Runoff Quality, Elizabeth L. Bullock, Dwayne R. Edwards, Phillip A. Moore Jr., Richard S. Gates Jan 2016

Effects Of Chemical Amendments To Swine Manure On Runoff Quality, Elizabeth L. Bullock, Dwayne R. Edwards, Phillip A. Moore Jr., Richard S. Gates

Biosystems and Agricultural Engineering Faculty Publications

Land-applied swine manure can be an environmental concern when runoff losses of manure constituents occur. The use of chemical amendments to mitigate these losses has been investigated for poultry litter, but materials such as swine manure have received less attention in this context, particularly at the plot scale or larger. The objective of this experiment was to evaluate the impacts of aluminum sulfate (alum; Al2(SO4)3), aluminum chloride (AlCl3), and ferric chloride (FeCl3) addition on runoff of selected constituents of land-applied swine manure. Manure was collected from feeder pigs fed a …

Go to article

Methods For Calculating Relative Cross-Track Error For Asabe/Iso Standard 12188-2 From Discrete Measurements, Joseph D. Rounsaville, Joseph S. Dvorak, Timothy S. Stombaugh Jan 2016

Methods For Calculating Relative Cross-Track Error For Asabe/Iso Standard 12188-2 From Discrete Measurements, Joseph D. Rounsaville, Joseph S. Dvorak, Timothy S. Stombaugh

Biosystems and Agricultural Engineering Faculty Publications

ASABE/ISO Standard 12188-2 provides test procedures for positioning and guidance systems in agricultural vehicles during straight and level travel. While the standard provides excellent descriptions of test procedures, it does not provide detail on methods to carry out the calculations necessary to calculate relative cross-track error (XTE), which is the primary error statistic used to judge accuracy. Given the travel speed and sampling constraints provided by the standard, the difference between a method based on nearest points or one based on path interpolation could hypothetically be as large as 25 cm. In this project, the standard was used to estimate …

Go to article

Development And Preliminary Evaluation Of A Spray Deposition Sensing System For Improving Pesticide Application, Melissa A. Kesterson, Joe D. Luck, Michael P. Sama Dec 2015

Development And Preliminary Evaluation Of A Spray Deposition Sensing System For Improving Pesticide Application, Melissa A. Kesterson, Joe D. Luck, Michael P. Sama

Biosystems and Agricultural Engineering Faculty Publications

An electronic, resistance-based sensor array and data acquisition system was developed to measure spray deposition from hydraulic nozzles. The sensor surface consisted of several parallel tin plated copper traces of varying widths with varying gap widths. The system contained an embedded microprocessor to monitor output voltage corresponding to spray deposition every second. In addition, a wireless module was used to transmit the voltage values to a remote laptop. Tests were conducted in two stages to evaluate the performance of the sensor array in an attempt to quantify the spray deposition. Initial tests utilized manual droplet placement on the sensor surface …

Go to article

Scalable Control Architecture For Variable-Rate Turn Compensation, Michael P. Sama, Joe D. Luck, Timothy S. Stombaugh May 2015

Scalable Control Architecture For Variable-Rate Turn Compensation, Michael P. Sama, Joe D. Luck, Timothy S. Stombaugh

Biosystems and Agricultural Engineering Faculty Publications

The objective of this study was to determine if a CAN bus could be used to implement variable-rate turn compensation in a manner that is scalable by encoding application rates for an entire implement into a single data message. A variable-rate turn compensation test fixture was developed that used a CAN bus to communicate application rates to 16 individual nodes using a 2-byte data message (80-bit extended identifier CAN messages). The system assumed that the physical structure of an implement was linear and that the control nodes were equally spaced. Application rates for the outer-most nodes were broadcasted and the …

Go to article

Creating A National Coalition To Address Tractor Overturn Fatalities., Pamela J. Tinc, Paul D. Ayers, John J. May, Mark A. Purschwitz, Julie A. Sorensen Apr 2015

Creating A National Coalition To Address Tractor Overturn Fatalities., Pamela J. Tinc, Paul D. Ayers, John J. May, Mark A. Purschwitz, Julie A. Sorensen

Biosystems and Agricultural Engineering Faculty Publications

Tractor overturns continue to be the leading cause of death on U.S. farms. While rollover protective structures (ROPS) are effective in preventing these fatalities, they are underutilized due to a number of barriers. Past programs in the U.S. and abroad have targeted this area of agricultural safety; however, a national program is not yet in place for U.S. farmers. This study seeks to build a national partnership to address tractor overturn fatalities by increasing the number of tractors with ROPS. A diverse, multisector steering committee has been organized and is working together using Whole System in a Room methods. This …

Go to article

Stored Grain Pack Factors For Wheat: Comparison Of Three Methods To Field Measurements, Josephine M. Boac, Rumela Bhadra, Mark E. Casada, Sidney A. Thompson, Aaron P. Turner, Michael D. Montross, Samuel G. Mcneill, Ronaldo G. Maghirang Jan 2015

Stored Grain Pack Factors For Wheat: Comparison Of Three Methods To Field Measurements, Josephine M. Boac, Rumela Bhadra, Mark E. Casada, Sidney A. Thompson, Aaron P. Turner, Michael D. Montross, Samuel G. Mcneill, Ronaldo G. Maghirang

Biosystems and Agricultural Engineering Faculty Publications

Storing grain in bulk storage units results in grain packing from overbearing pressure, which increases grain bulk density and storage unit capacity. This study compared pack factors of hard red winter (HRW) wheat in vertical storage bins using different methods: the existing packing model (WPACKING), the USDA Risk Management Agency (RMA) method, and the USDA Farm Service Agency Warehouse Licensing and Examination Division (FSA-W) method. Grain bins containing HRW wheat were measured in Kansas, Oklahoma, and Texas. Packing was measured in corrugated steel bins and reinforced concrete bins with diameters ranging from 4.6 to 31.9 m (15.0 to 104.6 ft) …

Go to article

Control System Development And Response Analysis Of An Electronically Actuated Variable-Orifice Nozzle For Agricultural Pesticide Applications, Joe D. Luck, Scott A. Shearer, Michael P. Sama, Santosh K. Pitla Jan 2015

Control System Development And Response Analysis Of An Electronically Actuated Variable-Orifice Nozzle For Agricultural Pesticide Applications, Joe D. Luck, Scott A. Shearer, Michael P. Sama, Santosh K. Pitla

Biosystems and Agricultural Engineering Faculty Publications

The goal of this research project was to further the development of an electromechanically controlled variable-orifice nozzle by creating an electronic control system and then evaluating that system based on step and ramp inputs. The control system was developed in a programming environment that combined an electronic data acquisition system and actuator with pressure and flow sensors. A proportional, variable-gain (based on system pressure) control system was developed to adjust nozzle flow rates to meet target application rates. The constraints were to achieve settling time of less than 1.0 s, overshoot of less than 10% of maximum flow (or minimum …

Go to article

An Optical Sprayer Nozzle Flow Rate Sensor, Joseph S. Dvorak, Luke E. Bryant Jan 2015

An Optical Sprayer Nozzle Flow Rate Sensor, Joseph S. Dvorak, Luke E. Bryant

Biosystems and Agricultural Engineering Faculty Publications

Ensuring proper flow rates from each nozzle on an agricultural sprayer has become even more important as advances continue to be made in precision application technology. In this article, we describe the structure and testing of a sensor technology based on optical cross-correlation to determine the flow rate of individual sprayer nozzles. An advantage of this technology is that it does not require that impellers or other components be placed in the flow, which could cause plugging. The only moving part in the entire system is a solenoid used to inject a tracer dye. The objective of this study was …

Go to article

Flow, Spray Pattern, And Droplet Spectra Characteristics Of An Electronically Actuated Variable-Orifice Nozzle, Joe D. Luck, Santosh K. Pitla, Michael P. Sama, Scott A. Shearer Jan 2015

Flow, Spray Pattern, And Droplet Spectra Characteristics Of An Electronically Actuated Variable-Orifice Nozzle, Joe D. Luck, Santosh K. Pitla, Michael P. Sama, Scott A. Shearer

Biosystems and Agricultural Engineering Faculty Publications

The purpose of this study was to develop and evaluate the flow rate, spray pattern, and droplet spectra characteristics of an actively controlled variable-orifice nozzle at constant carrier pressures. A commercially available variable-orifice nozzle (VariTarget) was modified to allow for direct electromechanical control of the metering stem. The modified system was tested at five carrier pressures ranging from 138 to 414 kPa and five metering stem (and thus orifice) positions. The metering stem position range was chosen because it provided a linear response in flow rate at each carrier pressure. Flow rate testing indicated a turndown ratio of 2.4:1 at …

Go to article

First Prev Next Last