Open Access. Powered by Scholars. Published by Universities.®

Bioresource and Agricultural Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Biosystems and Agricultural Engineering Faculty Publications

Discipline
Keyword
Publication Year

Articles 121 - 150 of 259

Full-Text Articles in Bioresource and Agricultural Engineering

Local Head Loss Of Non-Coaxial Emitters Inserted In Polyethylene Pipe, Osvaldo Rettore Neto, Jarbas Honorio De Miranda, José Antonio Frizzone, Stephen R. Workman May 2009

Local Head Loss Of Non-Coaxial Emitters Inserted In Polyethylene Pipe, Osvaldo Rettore Neto, Jarbas Honorio De Miranda, José Antonio Frizzone, Stephen R. Workman

Biosystems and Agricultural Engineering Faculty Publications

The design of a lateral line for drip irrigation requires accurate evaluation of head losses in not only the pipe but in the emitters as well. A procedure was developed to determine localized head losses within the emitters by the formulation of a mathematical model that accounts for the obstruction caused by the insertion point. These localized losses can be significant when compared with the total head losses within the system due to the large number of emitters typically installed along the lateral line. An experiment was carried out by altering flow characteristics to create Reynolds numbers (R) from 7,480 …

Go to article

Effects Of Growth Media Ph And Reaction Water Activity On The Conversion Of Acetophenone To (S)-1-Phenylethanol By Saccharomyces Cerevisiae Immobilized On Celite 635 And In Calcium Alginate, Nicholas P. Coleman, Czarena Crofcheck, Sue E. Nokes, Barbara L. Knutson Mar 2009

Effects Of Growth Media Ph And Reaction Water Activity On The Conversion Of Acetophenone To (S)-1-Phenylethanol By Saccharomyces Cerevisiae Immobilized On Celite 635 And In Calcium Alginate, Nicholas P. Coleman, Czarena Crofcheck, Sue E. Nokes, Barbara L. Knutson

Biosystems and Agricultural Engineering Faculty Publications

Biologically catalyzed reactions often produce enantiomers of the product; however, only one configuration is desired. Reaction conditions are known to affect enantiomer ratios and reaction kinetics, but little is known regarding the effect of processing conditions on whole-cell biocatalysis. Saccharomyces cerevisiae cells were grown in batch on glucose at pH = 4, 5, and 7, and then immobilized on Celite beads or in calcium alginate beads and used as the biocatalyst for the conversion of acetophenone in hexane to (S)-1-phenylethanol at water activities of 0.37, 0.61, and 0.80. S. cerevisiae was used as a model microorganism for the whole-cell catalyzed …

Go to article

Asymmetry Of Model Bin Wall Loads And Lateral Pressure Induced From Two- And Three-Dimensional Obstructions Attached To The Wall, Marek Molenda, Michael D. Montross, Sidney A. Thompson, Jozef Horabik Jan 2009

Asymmetry Of Model Bin Wall Loads And Lateral Pressure Induced From Two- And Three-Dimensional Obstructions Attached To The Wall, Marek Molenda, Michael D. Montross, Sidney A. Thompson, Jozef Horabik

Biosystems and Agricultural Engineering Faculty Publications

An obstruction attached to the wall of a bin produced by cohesive, moldy grain has been reported as a source of failure in steel bins. A study was conducted to estimate the effect of two-dimensional (plane) and three-dimensional (block) obstructions attached to the corrugated wall in a flat-floor model bin where the lateral wall pressure and vertical wall loads were measured. The model bin was 1.83 m in diameter, 5.75 m high, and filled with soft red winter wheat to a depth of 5.0 m (height-to-diameter ratio h/d of 2.75). The plane obstruction had the form of an annulus segment …

Go to article

Retrofitting Tractors With Rollover Protective Structures: Perspective Of Equipment Dealers, Shalome M. Tonelli, Kelley J. Donham, Kerry Leedom-Larson, Wayne Sanderson, Mark A. Purschwitz Jan 2009

Retrofitting Tractors With Rollover Protective Structures: Perspective Of Equipment Dealers, Shalome M. Tonelli, Kelley J. Donham, Kerry Leedom-Larson, Wayne Sanderson, Mark A. Purschwitz

Biosystems and Agricultural Engineering Faculty Publications

This study was one of a cluster of studies that originated via requests for proposals from the NIOSH National Agricultural Tractor Safety Initiative. The present study design consisted of several steps: (1) formation of an advisory group, (2) development and testing of a standard paper self-responding survey instrument, (3) sample selection of farm equipment dealers, (4) administration of the survey, (5) assessment and analysis of the survey, and (6) in-person response panel of dealers (n = 80) to review results of the questionnaire for further definition and sharpening of the recommendations from the survey. A key finding is that most …

Go to article

Integration Of An Extended Octagonal Ring Transducer And Soil Coulterometer For Identifying Soil Compaction, Santosh K. Pitla, Larry G. Wells, Scott A. Shearer Jan 2009

Integration Of An Extended Octagonal Ring Transducer And Soil Coulterometer For Identifying Soil Compaction, Santosh K. Pitla, Larry G. Wells, Scott A. Shearer

Biosystems and Agricultural Engineering Faculty Publications

The soil coulterometer is an "on-the-go" electro-mechanical system which collects impedance force data at multiple depths using an oscillating coulter. During the initial testing (summer 2006), only vertical soil impedance force data was collected using a pressure sensor. To improve the performance of the coulterometer, an extended octagonal ring transducer was integrated into the system to collect both the horizontal and vertical impedance forces given by the soil. In the summer of 2007, data was collected using the revised sensor from a typical central Kentucky field setting in a 0.8-ha (2-acre) plot. Four passes were made with the coulterometer. Seventy …

Go to article

Packing Factors Of Feed Products In Storage Structures, Samuel G. Mcneill, Michael D. Montross, Sidney A. Thompson, I. Joseph Ross, Thomas C. Bridges Jan 2008

Packing Factors Of Feed Products In Storage Structures, Samuel G. Mcneill, Michael D. Montross, Sidney A. Thompson, I. Joseph Ross, Thomas C. Bridges

Biosystems and Agricultural Engineering Faculty Publications

Experiments were conducted to measure the changes in bulk density of cracked corn, corn meal, soybean meal, cotton seed meal, and distillers dried grain (without solubles) when subjected to simulated overburden pressures. All materials were tested at two moisture content levels (approximately 8% and 12% w.b.) and seven pressures between 0 and 69 kPa (0 and 10 psi). A mathematical model was fitted to the data to predict the bulk density of each feed ingredient as a function of pressure and moisture content. These relationships were inserted into a previously developed computer model to predict ingredient packing within conventional storage …

Go to article

Airflow Resistance Of Wheat Bedding As Influenced By The Filling Method, J. Łukaszuk, M. Molenda, J. Horabik, B. Szot, Michael D. Montross Jan 2008

Airflow Resistance Of Wheat Bedding As Influenced By The Filling Method, J. Łukaszuk, M. Molenda, J. Horabik, B. Szot, Michael D. Montross

Biosystems and Agricultural Engineering Faculty Publications

A study was conducted to estimate the degree of variability of the airflow resistance in wheat caused by the filling method, compaction of the sample, and airflow direction. Two types of grain chambers were used: a cylindrical column 0.95 m high and 0.196 m in diameter, and a cubical box of 0.35 m side. All factors examined were found to influence considerably the airflow resistance. Gravitational axial filling of the grain column from three heights (0.0, 0.95 and 1.8 m) resulted in the pressure drops of 1.0, 1.3, and 1.5 kPa at the airflow velocity of 0.3 m/s. Consolidation of …

Go to article

Corn Stover Availability And Collection Efficiency Using Typical Hay Equipment, Robert M. Prewitt, Michael D. Montross, Scott A. Shearer, Timothy S. Stombaugh, Stephen F. Higgins, Samuel G. Mcneill, Shahab Sokhansanj May 2007

Corn Stover Availability And Collection Efficiency Using Typical Hay Equipment, Robert M. Prewitt, Michael D. Montross, Scott A. Shearer, Timothy S. Stombaugh, Stephen F. Higgins, Samuel G. Mcneill, Shahab Sokhansanj

Biosystems and Agricultural Engineering Faculty Publications

Corn stover has been identified as a potential feedstock for the production of fermentable sugars and thermochemical processes. The availability and efficiency of typical hay equipment for collecting corn stover has not been well quantified. Corn stover was collected for two years on a central Kentucky farm near Louisville. Six different harvesting treatments, using traditional hay equipment, were used to harvest corn stover. A rotary mower, rotary scythe (flail-type mower with windrow-forming shields), parallel bar rake, and a round baler were utilized. The average stover moisture content prior to grain harvest was above 40%, and field drying was required before …

Go to article

Characterization Of Dairy Milk House Waste Water In Kentucky, Anshu Singh, Czarena L. Crofcheck, Gail M. Brion Mar 2007

Characterization Of Dairy Milk House Waste Water In Kentucky, Anshu Singh, Czarena L. Crofcheck, Gail M. Brion

Biosystems and Agricultural Engineering Faculty Publications

This study focuses on characterization of milk house waste water from eight different farms in Kentucky. The farms were separated into three groups based on the number of cows: small (20-30), medium (30-60), and large (over 60 cows). Samples were collected once a month from four farms and twice a month from the remainder. Samples were analyzed for chemical, biochemical, and microbiological characteristics. Results indicated a large and significant variation in the chemical and microbiological characteristics between the farms. Farm size had a significant effect on the nutrient content of the waste water. Though samples exhibited seasonal variation, there was …

Go to article

Economic Analysis Of Cellulase Production Methods For Bio-Ethanol, Jun Zhuang, Mary A. Marchant, Sue E. Nokes, Herbert J. Strobel Jan 2007

Economic Analysis Of Cellulase Production Methods For Bio-Ethanol, Jun Zhuang, Mary A. Marchant, Sue E. Nokes, Herbert J. Strobel

Biosystems and Agricultural Engineering Faculty Publications

The cost of cellulase enzymes has limited the feasibility of producing ethanol from fibrous biomass. Traditional submerged fermentation (SmF) was compared to an alternative method of producing cellulase, solid state cultivation (SSC). Results from an economic analysis indicated that the unit costs for cellulase enzyme production were $15.67 (The prices are all 2004 prices in this article, except otherwise stated. We deflated newer prices to 2004 prices using a deflation factor 0.9 per year and inflated older prices to 2004 prices using an inflation factor 1.1.) per kilogram ($/kg) and $40.36/kg, for the SSC and SmF methods, respectively, while the …

Go to article

Development And Testing Of A Low-Cost Condensation Detection System, Michael D. Montross, George A. Duncan, Richard S. Gates Jul 2006

Development And Testing Of A Low-Cost Condensation Detection System, Michael D. Montross, George A. Duncan, Richard S. Gates

Biosystems and Agricultural Engineering Faculty Publications

A condensation sensing and control system was designed to detect condensation using a commercially available leaf wetness sensor (LWS). The leaf wetness sensor was a variable resistance grid-type that responded to moisture on the surface. A circuit was developed to compare the LWS voltage output to a user specified reference voltage, and operate a relay for possible switching of a humidity control device (for example a fan and/or heater). The condensation detection system operation was validated in an environmental chamber in the laboratory using a heat exchanger and water bath. Condensate was immediately detected when the plate was cooled below …

Go to article

Evaluation Of Fourier Transform Infrared Spectroscopy Measurements Of Glucose And Xylose In Biomass Hydrolyzate, Czarena L. Crofcheck, Michael D. Montross May 2006

Evaluation Of Fourier Transform Infrared Spectroscopy Measurements Of Glucose And Xylose In Biomass Hydrolyzate, Czarena L. Crofcheck, Michael D. Montross

Biosystems and Agricultural Engineering Faculty Publications

Measurement of sugars using traditional spectroscopic (UV/Vis) assays or high performance liquid chromatography (HPLC) can be time consuming and expensive. Alternative methods for measuring sugars after enzymatic hydrolysis of biomass would be convenient for screening potential biomass feedstocks and pretreatment methods. Fourier transform infrared spectroscopy (FTIR) has been utilized for measuring composition of various aqueous solutions and is evaluated here as an alternative to UV/Vis and HPLC assays. Solutions of glucose and xylose with concentrations between 0 and 1.5% w/v (total sugar content between 0 and 3.0% w/v) were used to build calibration curves for all three methods. A validation …

Go to article

Vertical Loads Due To Wheat On Obstructions Located On The Floor Of A Model Bin, Marek Molenda, Michael D. Montross, Sidney A. Thompson, Jozef Horabik Jan 2006

Vertical Loads Due To Wheat On Obstructions Located On The Floor Of A Model Bin, Marek Molenda, Michael D. Montross, Sidney A. Thompson, Jozef Horabik

Biosystems and Agricultural Engineering Faculty Publications

Tests were conducted in a model grain bin to evaluate the vertical loads acting on differently shaped obstructions embedded in wheat during filling, detention, and discharge. The bin had corrugated galvanized steel walls with a 1.83 m diameter and a flat bottom. All tests were conducted in a bin that was centrically loaded and unloaded. Three differently shaped obstructions (disc, cone, and cylinder) were tested; each had a circular base equivalent to 6% of the bin floor area. The obstructions were supported in the bin using a three-legged support structure. Each leg of the support structure rested on a load …

Go to article

Air Exchange Rate In A Horse Trailer During Road Transport, Joseph L. Purswell, Richard S. Gates, Laurie M. Lawrence, Jamey D. Jacob, Timothy S. Stombaugh, Robert J. Coleman Jan 2006

Air Exchange Rate In A Horse Trailer During Road Transport, Joseph L. Purswell, Richard S. Gates, Laurie M. Lawrence, Jamey D. Jacob, Timothy S. Stombaugh, Robert J. Coleman

Biosystems and Agricultural Engineering Faculty Publications

Horses traveling by road commonly experience heat stress conditions and poor air quality, which may be caused by insufficient ventilation; however, there are few estimates of air exchange in a horse trailer during transport. Air exchange rate was measured at ten locations within a four-horse trailer (internal volume 18.5 m3) using tracer gas decay measurement to assess the adequacy of ventilation. Three vehicle speeds (13, 48, and 97 km h-1) and three window configurations (all windows and roof vents closed, all windows open, all windows open and roof vents open forward) were tested with and without …

Go to article

Distribution Pattern Variability Of Granular Vrt Applicators, John P. Fulton, Scott A. Shearer, Stephen F. Higgins, Dennis Wayne Hancock, Timothy S. Stombaugh Nov 2005

Distribution Pattern Variability Of Granular Vrt Applicators, John P. Fulton, Scott A. Shearer, Stephen F. Higgins, Dennis Wayne Hancock, Timothy S. Stombaugh

Biosystems and Agricultural Engineering Faculty Publications

Granular applicators equipped with variable-rate technology (VRT) have gained popularity in recent years as a result of increased interest in variable-rate application. The purpose of this investigation was to characterize distribution patterns at varying rates for different granular applicators. Uniform-rate (UR) tests were conducted to assess the accuracy of variable-rate application from four granular applicators: two spinner-disc spreaders (A and B), and two pneumatic applicators (C and D). Pattern results indicated a consistent triangular pattern for spinner spreader B and consistent patterns for the pneumatic applicators (C and D). However, applicator D produced pattern variations at the center and right …

Go to article

Rate Response Assessment From Various Granular Vrt Applicators, John P. Fulton, Scott A. Shearer, Stephen F. Higgins, Matthew J. Darr, Timothy S. Stombaugh Nov 2005

Rate Response Assessment From Various Granular Vrt Applicators, John P. Fulton, Scott A. Shearer, Stephen F. Higgins, Matthew J. Darr, Timothy S. Stombaugh

Biosystems and Agricultural Engineering Faculty Publications

Variable-rate technology (VRT) adds complexity to application equipment, thereby confounding the assessment of applicator performance. The intent of this investigation was to assess the rate response of various VRT granular applicators: two spinner spreaders (A and B), and two pneumatic applicators (C and D). Variable-rate (VR) tests were conducted to quantify the rate response characteristics (delay and transition times) for the applicators. A sigmoidal function was used to model the rate response for five of the six tests. Applicator A exhibited a linear response during decreasing rate changes. Results indicated that only applicator B demonstrated consistent delay and transition times, …

Go to article

Spatial Variation Of Protein, Oil, And Starch In Corn, Samuel G. Mcneill, Michael D. Montross, Scott A. Shearer Jul 2005

Spatial Variation Of Protein, Oil, And Starch In Corn, Samuel G. Mcneill, Michael D. Montross, Scott A. Shearer

Biosystems and Agricultural Engineering Faculty Publications

Significant spatial yield variations are known to exist in cornfields with different soil types, topsoil depth, and other variables. Similarly, variations might also be found among the highly valued chemical components (oil, protein, and starch) in corn kernels due to local differences in soil type, fertility, acidity/pH, organic matter, etc. This study quantified the spatial variability of protein, oil, and starch content of corn from two conventional cornfields and two high-oil cornfields. Whole ears were harvested by hand from 20 to 40 randomly selected locations within each field. A differential global positioning system (DGPS) receiver recorded the location of each …

Go to article

Permeability Of Corn, Soybeans, And Soft Red And White Winter Wheat As Affected By Bulk Density, Michael D. Montross, Samuel G. Mcneill May 2005

Permeability Of Corn, Soybeans, And Soft Red And White Winter Wheat As Affected By Bulk Density, Michael D. Montross, Samuel G. Mcneill

Biosystems and Agricultural Engineering Faculty Publications

Darcy’s law is a function of viscosity, permeability, and velocity and can be used to predict the airflow resistance in granular materials at low air velocities. Permeability also governs the magnitude of natural convection currents during periods of non-aerated grain storage. The permeability of corn, soybeans, soft white winter wheat, and soft red winter wheat were measured as a function of bulk density and moisture content. Air was passed through a column of grain and the flow rate and pressure drop measured. Bulk density and kernel density were also measured to determine the porosity of grain in the test column. …

Go to article

Airflow Resistance Of Seeds At Different Bulk Densities Using Ergun's Equation, Marek Molenda, Michael D. Montross, Samuel G. Mcneill, Jozef Horabik May 2005

Airflow Resistance Of Seeds At Different Bulk Densities Using Ergun's Equation, Marek Molenda, Michael D. Montross, Samuel G. Mcneill, Jozef Horabik

Biosystems and Agricultural Engineering Faculty Publications

Airflow resistance of grains and oilseeds has been extensively studied. Traditionally the data has been presented using Shedd’s curves. However, this assumes that airflow resistance is independent of grain depth. Grain undergoes compaction during storage that changes the bulk density, porosity, and therefore the airflow resistance. Ergun’s equation is a function of particle size and porosity of the granular material. Airflow resistance by Ergun’s equation was used to predict the pressure drop across a column of corn, soft white winter wheat, soft red winter wheat, and soybeans at three moisture content levels and two bulk densities. The maximum root mean …

Go to article

Crop Yield Response To Precision Deep Tillage, Larry G. Wells, Timothy S. Stombaugh, Scott A. Shearer May 2005

Crop Yield Response To Precision Deep Tillage, Larry G. Wells, Timothy S. Stombaugh, Scott A. Shearer

Biosystems and Agricultural Engineering Faculty Publications

Experimental precision deep tillage was applied at three sites in central Kentucky with relatively well-drained silt loam soils in no-till crop production. Fields were divided into 0.4 ha (1 ac) grid cells using DGPS mapping. Assessment of soil compaction by machinery traffic was made using multiple soil cone penetrometer measurements and expressed as cone index (CI). Corn, wheat, and soybean yields were depressed in grid cells with CIavg ≥ 1.5 MPa (218 psi) prior to application of tillage treatments at sites 1 and 3, whereas at site 2, where most of the highest average CI values ranged from 1.44 …

Go to article

Effect Of Fat And Casein Particles In Milk On The Scattering Of Elliptically Polarized Light, Czarena L. Crofcheck, Jeremie Wade, Janakiraman N. Swamy, Mustafa M. Aslan, M. Pinar Mengüç May 2005

Effect Of Fat And Casein Particles In Milk On The Scattering Of Elliptically Polarized Light, Czarena L. Crofcheck, Jeremie Wade, Janakiraman N. Swamy, Mustafa M. Aslan, M. Pinar Mengüç

Biosystems and Agricultural Engineering Faculty Publications

In this article, we present an experimental approach to determine the milk fat content using scattered light intensity profiles. The elements of the scattering (Mueller) matrix have been shown to provide valuable information about variation of the optical properties of scattering particles. The scattering behavior of fat and casein in terms of the scattering matrix elements was experimentally determined for milk with varying fat levels ranging from 0.05 wt% (skim) to 3.20 wt% (whole). Three of the scattering Mueller matrix elements, specifically S11, S12/S11, and S33/S11, were found to be …

Go to article

Controller Area Network Based Distributed Control For Autonomous Vehicles, Matthew J. Darr, Timothy S. Stombaugh, Scott A. Shearer Mar 2005

Controller Area Network Based Distributed Control For Autonomous Vehicles, Matthew J. Darr, Timothy S. Stombaugh, Scott A. Shearer

Biosystems and Agricultural Engineering Faculty Publications

The goal of this project was to evaluate the potential of a controller area network (CAN bus) to be used as the communication network for a distributed control system on an autonomous agricultural vehicle. The prototype system utilized microcontroller-driven nodes to act as control points along a CAN bus. Messages were transferred to the steering, transmission, and hitch control nodes via a task computer. The task computer utilized global positioning system data to generate appropriate control commands. Laboratory and field testing demonstrated that each of the control nodes could function simultaneously over the CAN bus. Results showed that the task …

Go to article

Evaluation Of A Mechanical System For Reconstructing Soil On Surface Mined Land, John P. Fulton, Larry G. Wells Jan 2005

Evaluation Of A Mechanical System For Reconstructing Soil On Surface Mined Land, John P. Fulton, Larry G. Wells

Biosystems and Agricultural Engineering Faculty Publications

The existence of excessive soil compaction has hindered the surface mining industry from returning land to pre−mining productivity after reclamation, especially on prime farmland soils. Heavy earthmoving equipment used during reclamation tends to generate root−limiting bulk densities that adversely affect plant growth thereby decreasing yields. Therefore, the purpose of this study was to evaluate a mechanism, called the ‘Soil Regenerator,’ which reconstructs soil media at minimum bulk density during surface mine reclamation. The prototype soil forming mechanism was mounted on the front of a conventional bulldozer. Soil was placed in long narrow windrows by a scraper or bulldozer. As the …

Go to article

Aeration Strategies And Fan Cost Comparisons For Wheat In Mid-South Production Regions, Thomas C. Bridges, Michael D. Montross, Samuel G. Mcneill Jan 2005

Aeration Strategies And Fan Cost Comparisons For Wheat In Mid-South Production Regions, Thomas C. Bridges, Michael D. Montross, Samuel G. Mcneill

Biosystems and Agricultural Engineering Faculty Publications

Numerous factors influence the sizing of aeration fans for summer-harvested crops. Thirty years of weather data for Lexington, Kentucky, were analyzed and the cost of aeration was compared for two axial fans (afan1, afan2) and one centrifugal fan (cfan1). Aeration costs were defined as the sum of the following components: the cost of owning the fan, the cost of electricity for operating the fan, a cost for wheat shrinkage during aeration, and a cost for dry matter loss (DML). The fans were selected to deliver airflow rates of approximately one, two, and three times the recommended aeration rate of 0.11 …

Go to article

Streambank Erosion Associated With Grazing Practices In The Humid Region, Carmen T. Agouridis, Dwayne R. Edwards, Stephen R. Workman, José R. Bicudo, Benjamin K. Koostra, Eric S. Vanzant, Joseph L. Taraba Jan 2005

Streambank Erosion Associated With Grazing Practices In The Humid Region, Carmen T. Agouridis, Dwayne R. Edwards, Stephen R. Workman, José R. Bicudo, Benjamin K. Koostra, Eric S. Vanzant, Joseph L. Taraba

Biosystems and Agricultural Engineering Faculty Publications

The effects of cattle grazing on stream stability have been well documented for the western portion of the U.S., but are lacking for the east. Stream and riparian damage resulting from grazing can include alterations in watershed hydrology, changes to stream morphology, soil compaction and erosion, destruction of vegetation, and water quality impairments. However, few studies have examined the successes of best management practices (BMPs) for mitigating these effects. The objective of this project was to assess the ability of two common BMPs to reduce streambank erosion along a central Kentucky stream. The project site consisted of two replications of …

Go to article

Vertical Wall Loads In A Model Grain Bin With Non-Axial Internal Inserts, Marek Molenda, Michael D. Montross, Jozef Horabik, Sidney A. Thompson Sep 2004

Vertical Wall Loads In A Model Grain Bin With Non-Axial Internal Inserts, Marek Molenda, Michael D. Montross, Jozef Horabik, Sidney A. Thompson

Biosystems and Agricultural Engineering Faculty Publications

A study was conducted to estimate the degree of load asymmetry in a bin with non-axial internal inserts. Internal inserts in the form of an annulus segment were attached to the wall, and their influence on vertical wall loads during centric filling and discharge in a model bin were measured. Wall and floor loads were measured in a corrugated-wall model grain bin with a diameter of 2.44 m and a height of 7.3 m filled with soft red winter wheat to a depth of 6.7 m (height-to-diameter ratio of 2.75). Tests were conducted with inserts that extended circumferentially 30°, 60°, …

Go to article

Seasonal Aeration Rates For The Eastern United States Based On Long-Term Weather Patterns, Michael D. Montross, Samuel G. Mcneill, Thomas C. Bridges Sep 2004

Seasonal Aeration Rates For The Eastern United States Based On Long-Term Weather Patterns, Michael D. Montross, Samuel G. Mcneill, Thomas C. Bridges

Biosystems and Agricultural Engineering Faculty Publications

Most aeration fans are sized to produce a minimum airflow rate of 0.1 m3/min/t (0.1 cfm/bu) in on-farm grain storage structures. At this airflow rate a significant amount of time is required to move a cooling front completely through a bin. The desired grain temperature and prevailing weather conditions will have a significant effect on required fan size. Thirty years of weather data were analyzed for the eastern United States to determine the amount of time available in temperature windows between 0 to 15.C and 0 to 17.C. Contour maps were generated with ArcMap 8.3 for the percentage …

Go to article

Suitability Of A Gps Collar For Grazing Studies, Carmen T. Agouridis, Timothy S. Stombaugh, Stephen R. Workman, Benjamin K. Koostra, Dwayne R. Edwards, Eric S. Vanzant Jul 2004

Suitability Of A Gps Collar For Grazing Studies, Carmen T. Agouridis, Timothy S. Stombaugh, Stephen R. Workman, Benjamin K. Koostra, Dwayne R. Edwards, Eric S. Vanzant

Biosystems and Agricultural Engineering Faculty Publications

The traditional means of tracking animal location in a field is by visual observation. Not only is this method labor intensive, it is also prone to error as the observer can alter cattle movement, observation periods are often too short to obtain confidence in general daily behavior patterns, and observer fatigue becomes an issue. In the 1990s, the University of Kentucky began using GPS collars on cattle to track their position with the goal of incorporating this information into cattle management practices. One of the key unanswered questions regarding the GPS collars is the accuracy of the position data recorded …

Go to article

Effect Of Moisture Content And Broken Kernels On The Bulk Density And Packing Of Corn, Samuel G. Mcneill, Sidney A. Thompson, Michael D. Montross Jul 2004

Effect Of Moisture Content And Broken Kernels On The Bulk Density And Packing Of Corn, Samuel G. Mcneill, Sidney A. Thompson, Michael D. Montross

Biosystems and Agricultural Engineering Faculty Publications

Shelled yellow dent corn samples were conditioned to three moisture content levels (12%, 15%, and 18% w.b.) and mixed with a prescribed amount of broken corn particles of known size (geometric mean diameter of 1.0, 1.4, 2.0, 2.8, and 4.0 mm) and concentration (2.5%, 5.0%, and 7.5% by weight) levels. The initial bulk density and grain compaction under simulated overburden pressure tests were determined for each sample. Uniaxial compression tests were performed for seven vertical pressure levels (3.4, 6.9, 14, 28, 55, 110, and 165 kPa) with a minimum of three replications each. Tests were performed at two locations with …

Go to article

The Influence Of Environmental Temperature And Substrate Initial Moisture Content On Aspergillus Niger Growth And Phytase Production In Solid−State Cultivation, Seaborn B. Carter, Sue E. Nokes, Czarena L. Crofcheck May 2004

The Influence Of Environmental Temperature And Substrate Initial Moisture Content On Aspergillus Niger Growth And Phytase Production In Solid−State Cultivation, Seaborn B. Carter, Sue E. Nokes, Czarena L. Crofcheck

Biosystems and Agricultural Engineering Faculty Publications

Aspergillus niger is being used commercially for phytase production utilizing solid-state cultivation; however, no studies have been published that investigated the optimal environmental temperature and initial substrate water content to maximize fungal growth and/or phytase production. Solid-state cultivations of Aspergillus niger on wheat bran and soybean meal were conducted at three temperatures (25°C, 30°C, and 35°C) and three initial moisture contents (50%, 55%, and 60% wet basis) in a split-plot full-factorial experimental design. Fermentations were conducted for 0, 24, 48, 72, and 120 h. The containers were sampled destructively and assayed for phytase activity and glucosamine concentration as an estimate …

Go to article

First Prev Next Last