Bioresource and Agricultural Engineering Commons^™

Atv Mountable Tree Planting Station, Bradley M. Rogers

BioResource and Agricultural Engineering

No abstract provided.

Design And Evaluation Of An Irrigation Storage Reservoir, James Tomac

BioResource and Agricultural Engineering

No abstract provided.

Modification Of A Draw Bar Type Arena Harrow To Three Point Mounted Type Harrow, Clayton Alan Brown

BioResource and Agricultural Engineering

This senior project will be the design, and construction of a three point hitch to be attached to a draw bar type spike tooth harrow. Currently used by the Cal Poly Rodeo Team to cultivate their arena before performances, and practices.

The attachment will allow the harrow to be pulled in both directions to create different types of soil affects.

Also the fabrications has a minimal budget so the majority of the materials will be scrap material already in position of the rodeo team or donated to the project.

Design, Construction, And Evaluation Of An Rc Vehicle Dynamometer, Christian Marron

BioResource and Agricultural Engineering

No abstract provided.

Installation Plan For An Automatic Fresh Water Ball Valve For The Dairy Unit Flush Tank At California Polytechnic State University, Garret James Rowley

Agricultural Education and Communication

The purpose of this senior project was to plan for the installation of an automatic fresh water valve at the Dairy Unit at California Polytechnic State University. This new valve will replace the existing manual gate valve that repeatedly overfills the tank. The data and research was completed in order to assess the projects feasibility and installation needs. This project outlines the steps needed to be taken in order to install the valve, as well provides a detailed explanation on why this installation is pertinent.

Project Proposal And Development Plan For A New Security Gate At Swanton Pacific Ranch, K. Morgan Perry

Agricultural Education and Communication

The purpose of this project was to develop a prototype gate for Cal Poly’s Swanton Pacific Ranch in Santa Cruz, CA. Swanton Pacific Ranch requested that the author design and build a 21’x5’ single-retractable gate for Swanton Pacific Ranch to help decrease the security issues that have recently arisen at the facility. The design and format of this project are focused towards the desires and goals set forth by Swanton Pacific Ranch and the Operations Manager, Steve Auten in order to obtain a certain outcome. This project provides an outline of what needs to be done in order to produce …

Design, Testing, And Evaluation Of Stands To Facilitate Tractor Clutch Repairs, Nathan Sperling

BioResource and Agricultural Engineering

No abstract provided.

Design, Construction And Analysis Of A Conveyor System For Drying Seasoned Snack Almonds, Nick Civetz

BioResource and Agricultural Engineering

No abstract provided.

Design, Construction, And Evaluation Of A Cotton Module Tarp Roller, Bradon Spain

BioResource and Agricultural Engineering

No abstract provided.

Feasibility Of Water Reuse In Solano County, Dakari Barksdale

BioResource and Agricultural Engineering

No abstract provided.

Design, Fabrication And Analysis Of A Utility Strip For Light Utility Trucks, Ian D. Hare

BioResource and Agricultural Engineering

This senior project discusses the design and fabrication of a utility strip for a light utility truck. The utility strip is desirable for off road enthusiasts with its double use as a dirt bike ramp as well as a traction strip. This report will show the cost of materials as well as labor, and if it is feasible for mass production.

Tests were conducted which indicated that the Utility Strip was able to support the weight of a dirt bike as a ramp, as well as regain traction to a two-wheel drive truck stuck in the sand. This product can …

Design And Construction Of A Feeding System For A Pellet Mill, Jeremy Mahrt

BioResource and Agricultural Engineering

No abstract provided.

Pressure Recorders: Low-Cost, Robust, Low-Battery-Use Field Measurement Techniques For Trending Water Pressure, Stuart Styles, Kerilyn Ambrosini

BioResource and Agricultural Engineering

Water users across California need robust, low-cost water level/pressure sensors with integrated data loggers for a high level of precision and accuracy. The Cal Poly Irrigation Training and Research Center (ITRC) has installed Telog Instruments devices in California and Nevada over the last 12 years to provide a performance review of the devices. The two devices focused on were the Telog Instruments WLS-31 Level Tracker and LPR-31i Line Pressure Recorder. Over the study period, ITRC has collected several sets of data in varying situations. After 11 years of use on a reservoir, the two Telog WLS-31 units had a 1% …

Implementation Of New Irrigation Protocols On Strawberry Transplants On The California Central Coast, Stuart Styles, Kerilyn Ambrosini

BioResource and Agricultural Engineering

For the past five growing seasons, the Cal Poly Irrigation Training and Research Center (ITRC) has conducted research on water use, salinity levels and various other factors related to strawberry transplant establishment. This report summarizes research that can be found online: www.itrc.org/projects.htm.

The project’s goal was to develop an analysis of irrigation practices of the strawberry growers on the central coast of California, primarily during the establishment of transplants. From the analysis, sprinkler use reduction methods were developed. These methods conserve water, save pumping costs, and reduce the runoff that can potentially contaminate local waterways. California growers contributed control and …

Design & Evaluation Of An Rfid Harvest Labor Tracking System, Sam Parnagian

BioResource and Agricultural Engineering

This project was the design and evaluation of a harvest labor tracking system through the use of RFID technology. This test will be performed for Fowler Packing Company with one citrus harvest crew. This system will allow each employee to be paid on an individual basis while also developing payroll in real-time. This project will save Fowler Packing money on a yearly basis by paying each employee for the actual work they do and increase the number of bins harvested per day by incentivizing harvest practices.

Design And Evaluation Of A Drip Irrigation System On Apple Orchards In Julian Ca, Jeffrey Huntley

BioResource and Agricultural Engineering

No abstract provided.

Under-Tree Sprinkler Design In A Walnut/Cherry Orchard, Edward Caminata

BioResource and Agricultural Engineering

The goal of this project is to design a permanent under-tree sprinkler system for a 50 acre walnut and cherry orchard in Linden, CA. This will allow irrigation water to be delivered to the trees more uniformly and decrease the labor requirements needed to irrigate. This design will target a value of 0.92 for the Distribution Uniformity of each set throughout the system.

Design Constuction And Evaluation Of A Vertical Hydroponic Tower, Nicholas A. Heredia

BioResource and Agricultural Engineering

This project encompasses the design, construction, and evaluation of a vertical hydropoinc tower. The tower was designed to cycle nutrient rich water through two hydropoinc systems, drip and nutrient film technique then return the water back to the reservoir. The tower will grow 5 different plant varieties. Evaluations have been done on the elevation, system type, and crop type to determine the most productive.

The tower contained four troughs where plants were grown. Due to the structure of the tower two of the troughs were elevated 20” higher than the other two troughs. The elevation of the plants did not …

The Design, Construction, And Testing Of An In-Furrow Planter For The Planting Of Low Residue Cover Crops, Chandler A. Bennett

BioResource and Agricultural Engineering

This project encompasses the design, construction, and evaluation of an in-furrow planter for the planting of low residue cover crops. The purpose of planting the furrow is for the management of off-site removal of residual pesticides, nutrients, and soil by mitigating water flow. Due to there being no current solution for the mechanized planting of furrows this project was pursued to provide a means for farmers to do so at the most cost effective means. The result of this project is a prototype planter that can be made with basic shop tools, be made with off the shelf parts, and …

Evaluation And Modification Of Solid Set Sprinkler System For Hirashima Berry Farms, Jeffrey Hirashima

BioResource and Agricultural Engineering

This project encompassed the evaluation and recommendations for a solid set sprinkler system. This project will determined the distribution uniformity for an existing solid set sprinkler system located on Hirashima Berry Farms. After the evaluation was complete modifications were suggested to the farmer in order to lower watering costs during pre-irrigation and provide salt leaching. The results from the system evaluation show that the current system distribution uniformity is 0.69. The following recommendations and conditions were assumed; normal pre-irrigation practices, an EC threshold of 2.0 dS/m for strawberries, a leaching requirements of 0.15, and an improved DU to 0.80. With …

Design And Fabrication Of A Sporting Clay Launcher, Zachary Flowers

BioResource and Agricultural Engineering

No abstract provided.

Groundwater Challenges, Charles M. Burt

BioResource and Agricultural Engineering

There are some old lessons that continue to repeat themselves throughout the history of irrigation. For example, it has become a common understanding that accumulated salinity from irrigation spelled the doom of some ancient civilizations in the Middle East. Despite this ancient knowledge, today we still have numerous irrigated basins in which there is no outlet for high-salinity drainage flows.

Likewise, groundwater is something that traditionally has not been well understood, and is often treated as an ever-present back-up plan for irrigation. The “water rights” laws in the western US and elsewhere almost exclusively formalized rules about and concentrated on …

Flow Measurement Options For Canal Turnouts, Kyle Feist, Charles M. Burt

BioResource and Agricultural Engineering

Volumetric record-keeping, billing, and allocations at irrigation district delivery points (turnouts) are the norm, rather than the exception for most California irrigation districts. However, many older districts are just beginning these efforts, and other districts are trying to improve existing hardware and procedures. Volumetric accounting with high accuracy and a reasonable price presents unique engineering challenges for irrigation districts because of the variety of existing structures and configurations at irrigation delivery points. Because it is likely that irrigation districts will attempt to utilize existing devices, or slightly modify them, there is a need for standardized installation and/or calibration. This paper …

Irrigation System Regulating (Buffer) Reservoirs, Charles M. Burt

BioResource and Agricultural Engineering

Regulating reservoirs (also known as "balancing" or "buffer" reservoirs) are very commonly used in western US irrigation district modernization projects with canal systems. Some districts have a dozen or more reservoirs within total service areas of 20,000 – 40,000 ha. This paper presents details of sizing and control of flows into and out of the reservoirs.

Groundwater Nitrate In California: What Should Be Done?, Charles M. Burt

BioResource and Agricultural Engineering

Charle's Burt PowerPoint presentation discusses current issues concerning nitrates in groundwater in California, as well as recommendations made to the State Water Board by the Nitrate Task Force.

Design And Construction Of Five Gallon Anaerobic Digesters, Daniel John Schricker

BioResource and Agricultural Engineering

This project discusses the design, construction, and testing of a laboratory scale anaerobic digestion reactors. It included four digesters and two gas measurement devices. The outside dimensions of the digester were 22 inch tall with a 10.5 inch diameter. They were constructed from schedule 40 PVC pipe, with a wall thickness of 0.5 inches. They were designed to be filled with 20 liters of digester feed stock, at a height of 16 inches from the bottom, leaving 5 inches of head space above the digester feed for biogas accumulation. Two of the reactors were heated with Hydrofarm seedling heating pads …

Design And Construction Of A Portable Cattle Loading Ramp, Gino A. Torlai

BioResource and Agricultural Engineering

This project is to design and construct an affordable and effective portable cattle loading trailer. The trailer should save money by not having to buy a commercial brand and also by being able to utilize the piece of equipment at multiple different ranches.

Design And Construction Of A Portable Gantry Hoist, Sam Hutcheson

BioResource and Agricultural Engineering

This report covers the design of a portable gantry hoist with a custom frame design. The design was based off of the materials that were available and practical for this project to save money. The portable gantry hoist will be rated for a 2 ton capacity. The casters, trolley, and hoist were the only parts purchased.

Thermodynamic Efficiency Evaluation For Distillation Of Ethanol, Joe A. Cavaletto

BioResource and Agricultural Engineering

Energy will always be a consideration when distilling any product. Fog’s End Distillery in Gonzales, CA is a small scale micro distillery for ethanol. For Fog’s End, efficiency is key to staying competitive. In this project the efficiency of energy in vs product out will be calculated. While collecting this data the price/bottle for energy will be determined and used for an assembly cost. To determine the efficiency the fuel usage will be recorded for several distillation trials. The mash contents and product contents will all be measured and calculations will be performed to find the theoretical amount of energy …

Grass Referenced Based Vegetation Coefficients For Estimating Evapostranspiration For A Variery Of Natural Vegetation, Daniel J. Howes, Mariana Pasquet

BioResource and Agricultural Engineering

In arid and semi-arid regions, evapotranspiration from vegetation results in the significant utilization of available water. Accurate estimates of evapotranspiration are required for surface and subsurface hydrologic evaluations as well as irrigation district water balance studies. A significant amount of transferable information exists for irrigated agricultural crops through past and current research in the form of grass or alfalfa reference based crop coefficients (Kc) and basal crop coefficients (Kcb). However, transferable evapotranspiration information on natural vegetation is limited. Much of the work was conducted in the early to mid-1900’s and is presented as actual evapotranspiration from the vegetation at the …