Bioresource and Agricultural Engineering Commons^™

Temporal Evaluation Of Corn Respiration Rates Using Pressure Sensors, Gagandeep Singh Ubhi

Graduate Theses and Dissertations

High respiration rate of a grain indicates faster degradation of its dry matter. Proper grain management requires chronological and precise measurements of carbon dioxide evolved from grain respiration during the postharvest storage duration. Therefore the main goal of this research was to develop a new technique that evaluates temporal corn respiration rate using pressure sensors. It was based on measuring pressure drop associated with the grain respiration in a closed container and using it to calculate the grain respiration rates.

Dry corn (Zea Mays L.) was procured from a local farmer and stored at 4ºC. Corn rewetting technique was applied …

High Throughput In Vivo Analysis Of Plant Leaf Chemical Properties Using Hyperspectral Imaging, Piyush Pandey, Yufeng Ge, Vincent Stoerger, James C. Schnable

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

The possibility of predicting plant leaf chemical properties using hyperspectral images was studied. Sixty maize and 60 soybean plants were used, and two experiments were conducted: one with water limitation and the second with nutrient limitation, with the purpose of creating wide ranges of these chemical properties in plant leaf tissues. A hyperspectral imaging system with a spectral range from 550 to 1700 nm was used to acquire plant images in a high throughput fashion (plants placed on an automated conveyor belt). Leaf chemical properties were measured in the laboratory. Partial least squares regression was implemented on spectral data to …

Field-Observed Angles Of Repose For Stored Grain In The United States, Rumela Bhadra, Mark E. Casada, Sidney A. Thompson, Josephine M. Boac, Ronaldo G. Maghirang, Michael D. Montross, Aaron P. Turner, Samuel G. Mcneill

Biosystems and Agricultural Engineering Faculty Publications

Bulk grain angle of repose (AoR) is a key parameter for inventorying grain, predicting flow characteristics, and designing bins and grain handling systems. The AoR is defined for two cases, piling (dynamic) or emptying (static), and usually varies with grain type. The objective of this study was to measure piling angles of repose for corn, sorghum, barley, soybeans, oats, and hard red winter (HRW) wheat in steel and concrete bins in the United States. Angles were measured in 182 bins and 7 outdoor piles. The piling AoR for corn ranged from 15.7° to 30.2° (median of 20.4° and standard deviation …

A Method For Reflectance Index Wavelength Selection From Moisture-Controlled Soil And Crop Residue Samples, Ali Hamidisepehr, Michael P. Sama, Aaron P. Turner, Ole O. Wendroth

Biosystems and Agricultural Engineering Faculty Publications

Reflectance indices are a method for reducing the dimensionality of spectral measurements used to quantify material properties. Choosing the optimal wavelengths for developing an index based on a given material and property of interest is made difficult by the large number of wavelengths typically available to choose from and the lack of homogeneity when remotely sensing agricultural materials. This study aimed to determine the feasibility of using a low-cost method for sensing the moisture content of background materials in traditional crop remote sensing. Moisture-controlled soil and wheat stalk residue samples were measured at varying heights using a reflectance probe connected …

Equilibrium Moisture Content Of Kabuli, Chickpea, Black Sesame, And White Sesame Seeds, Paul R. Armstrong, Elizabeth B. Maghirang, Bhadriraju Subramanyam, Samuel G. Mcneill

Biosystems and Agricultural Engineering Faculty Publications

Sesame and chickpea are important crops in Ethiopia because both are major export crops that generate much revenue for both small farmers and the country as a whole. However, there is a lack of information about the fundamental equilibrium moisture content (EMC) relationships among these crops, which would help facilitate better monitoring and storage. Therefore, EMC adsorption and desorption prediction models based on temperature (T) and relative humidity (RH) were developed for the modified Chung-Pfost and modified Henderson models for Kabuli chickpea (KC), black sesame (BS), and white sesame (WS) seeds. The samples for conducting the adsorption and desorption tests …

Characterization Of Ground Nozzles For Pesticide Applications, Ryan Henry

Department of Agronomy and Horticulture: Dissertations, Theses, and Student Research

Pesticide applications are a common component of crop production systems in the United States (US). For row crop systems (e.g. corn, soybean, or wheat), pesticides are applied by ground, aerial, or chemigation methods. The exact method of pesticide delivery is not universally regulated/ prescribed in the US, and the equipment and application technique are largely defined by the individual applicator. A wide variety of choices and decisions must be made by applicators to result in a successful pesticide application. Examples of these choices include proper active ingredient(s), carrier volume and equipment (e.g. nozzle type, spacing, and operating pressure) selection while …

Increasing Maize Tolerance To Drought And Flood With Seed Coating Treatments, Jacob E. Bennett, Achint Sanghi, R. P. Kingsly Ambrose

The Summer Undergraduate Research Fellowship (SURF) Symposium

The lack of irrigation in regions prone to drought, and flooding due to high rainfall or lack of drainage affects seed viability and the subsequent germination and crop establishment. Seed treatment in the form of coatings shows promise as an effective method to preserve the viability of corn (Zea mays) seeds in drought and flood conditions. Chemical formulations may help improve the seed corn vigor under these stressed conditions. This study examined the efficacy of β-aminobutyric acid [BABA] and N-isopropylacrylamide [NIPA] in inducing drought resistance, as well as the ability of lanolin and linseed oil to provide flood …

Crop Selection, Cost Analysis, And Irrigation System Design For The Replanting Of A Nut Orchard, Maximilian Bricker

BioResource and Agricultural Engineering

This report was made to help the landowner of Bricker Farms make decisions regarding the replanting of his orchard. The decisions that need to be made in this process include: which crop to plant, how to plant it, and how to improve the distribution uniformity of irrigation water on the orchard. The report does not give definitive final decisions, but presents viable options that the landowner can utilize when deciding. In addition to the options that are presented, the report offers suggestions to the landowner so that the replanting process is done properly in a timely and economically-friendly manner.

Assessment Of An Industrial Type Radiant Heating System For Drying Rough Rice, Anne Adhiambo Okeyo

Graduate Theses and Dissertations

Rough rice is normally harvested at moisture contents (MCs) higher than that for safe storage. The objective for this study was to investigate the effectiveness of scaled-up infrared (IR) heating followed by tempering steps to dry freshly-harvested rough rice. An industrial type, pilot scale, IR drying equipment, designed to convey rough rice on a vibrating conveyor belt was used in this study. The heating zone of the equipment had catalytic IR emitters powered by natural gas. Freshly-harvested rough rice of long-grain pureline (cv. Cheniere), long-grain hybrid (cv. 6XP 756) and medium-grain (cv. CL 271) cultivars at initial moisture contents (IMCs) …

Correlating Bulk Density (With Dockage) And Test Weight (Without Dockage) For Wheat Samples, Rumela Bhadra, Mark E. Casada, Josephine M. Boac, Aaron P. Turner, Sidney A. Thompson, Michael D. Montross, Ronaldo G. Maghirang, Samuel G. Mcneill

Biosystems and Agricultural Engineering Faculty Publications

In grain bins, the compaction of stored grain is caused by the overbearing pressure of the bulk material in the bin. To predict the amount of grain in the bin, compaction values must be determined based on the average bulk density (BD) of the stored material. However, BD is determined following the Federal Grain Inspection Service (FGIS) guidelines for measuring test weight (TW), which require that dockage be removed prior to measuring wheat TW. Thus, this creates a problem for predicting grain compaction and conducting inventory studies, because the average BD of the grain in a bin for these calculations …

Long-Term Tillage System Impacts On Soil Erodibility, Julianne R. Chechanover, Dennis C. Flanagan

The Summer Undergraduate Research Fellowship (SURF) Symposium

Conservation tillage practices, such as no-till agriculture, have the potential of reducing the erodibility of a soil compared to conventional agricultural practices. This research sought to determine whether long-term agricultural practices affect the baseline erodibility properties of a soil. Two soils from Throckmorton-Purdue Agricultural Center in Tippecanoe County, Indiana were used during this experiment. One soil was treated with a long-term conventional tillage (fall chisel, spring disk) system and the other soil was treated with a long-term no-till system. The soils’ interrill erodibility, and rill erodibility and critical hydraulic shear stress were measured under a rainfall simulator using soil boxes …

Computer Vision System For Grading Mangos In Bangladesh, Md Abdul Momin, Md Towfiqur Rahman, Mst Sabrina Sultana, Igathinathane Cannayen

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Mango (Mangifera indica) is one of the most common, important, and popular fruits among fruits produced in Bangladesh. In Bangladesh, mango was cultivated in about 0.078 million acres with an annual production of 0.8 million tonne. However, the technologies used in post-harvest processing (e.g., grading, sorting, etc.) of mango are mostly traditional involving human labors; and the methods are far from satisfactory, in terms of accuracy and throughput. In order to grade mango according to size, we developed a machine vision system with image processing capabilities that can measure sizes of mango fruits from the images. In this system images …

Stored Grain Pack Factors For Wheat: Comparison Of Three Methods To Field Measurements, Josephine M. Boac, Rumela Bhadra, Mark E. Casada, Sidney A. Thompson, Aaron P. Turner, Michael D. Montross, Samuel G. Mcneill, Ronaldo G. Maghirang

Biosystems and Agricultural Engineering Faculty Publications

Storing grain in bulk storage units results in grain packing from overbearing pressure, which increases grain bulk density and storage unit capacity. This study compared pack factors of hard red winter (HRW) wheat in vertical storage bins using different methods: the existing packing model (WPACKING), the USDA Risk Management Agency (RMA) method, and the USDA Farm Service Agency Warehouse Licensing and Examination Division (FSA-W) method. Grain bins containing HRW wheat were measured in Kansas, Oklahoma, and Texas. Packing was measured in corrugated steel bins and reinforced concrete bins with diameters ranging from 4.6 to 31.9 m (15.0 to 104.6 ft) …

Pack Factor Measurements For Corn In Grain Storage Bins, Rumela Bhadra, Aaron P. Turner, Mark E. Casada, Michael D. Montross, Sidney A. Thompson, Josephine M. Boac, Samuel G. Mcneill, Ronaldo G. Maghirang

Biosystems and Agricultural Engineering Faculty Publications

Shelled yellow corn is commonly stored in concrete or corrugated steel bins. Granular materials compact under their own weight, primarily due to particle rearrangement, leading to an increase in bulk density and a change in volume when stored. Reliable grain pack factors are needed to estimate storage capacities and to accurately monitor grain inventories. A science-based model (WPACKING) of pack factors is available that uses the differential form of Janssen's equation and takes into account the variation in density caused by pressure variation with height and moisture content of the grain and accounts for the effects of grain type, test …

Potential For Optical Sensor-Based Nitrogen Fertilization In Grain Sorghum (Sorghum Bicolor L. Moench) In Arkansas, Kamil H. Rosales Rodriguez

Graduate Theses and Dissertations

Ground-based active-optical (GBAO) crop sensors have become an effective tool to improve nitrogen (N) use efficiency and to predict yield early in the growing season, particularly for grass crops. Commercially available canopy sensors calculate the normalized difference vegetative index (NDVI) by emitting light in the red and near infrared range of the electromagnetic spectrum. The NDVI is used to evaluate vigor status and to estimate yield potential. However, few studies have been conducted to compare the performance of commercially available sensors. Therefore, a study was conducted using the most common crop canopy sensors: i) N-Tech's GreenSeeker^TM (GS), ii) Holland …

Infiltration And Runoff Parameters For Tilled And No-Till Row Crops, Andrew J. Volkmer

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Infiltration and runoff are hydrologic processes that effect the amount of water available to plants, for groundwater recharge, and for stream flow. No-till planting (NT) is a management practice used to reduce soil erosion, increase water infiltration, and reduce soil water evaporation, and can have great impact on infiltration and runoff. An investigation was conducted to determine the impact of NT on infiltration and runoff when compared to tilled conditions.

Runoff and precipitation data was gathered from sites at Fillmore County, NE, Phelps County, NE, the USDA-ARS North Appalachian Experimental Watersheds (NAEW) near Coshocton, OH, and the Lennoxville Research Station …

Variedades De Sorgos Bmr: Una Alternativa Para Producir Forraje, Instituto Nacional De Innovación Y Transferencia En Tecnología Agropecuaria (Inta-Costa Rica), Roberto Tinoco Mora

INTSORMIL Scientific Publications

Nervadura de color café en variedad de sorgo BMR.

Durante el año 2010, el Instituto Nacional de Innovación y Transferencia en Tecnología Agropecuaria (INTA-Costa Rica), conjuntamente con el Programa Colaborativo y de Apoyo a la Investigación del Sorgo, el Mijo y otros Granos (INTSORMIL, CRSP) ubicado en El Salvador. elaboraron un proyecto de investigación para evaluar la adaptación, producción y valor nutritivo de una colección de 15 variedades de sorgo (Sorghum bicolor) para alimentación animal. Las variedades disponían del gen recesivo denominado BMR, siglas en inglés de "Brown mid rib" que significan "vena café" (Figura 1).

Este gen tiene la …

Laboratory Performance Of A Mass Flow Sensor For Dry Edible Bean Harvesters, Rodrigo S. Zandonadi, Timothy S. Stombaugh, Scott A. Shearer, Daniel M. Queiroz, Michael P. Sama

Biosystems and Agricultural Engineering Faculty Publications

Due to the importance of yield monitoring, researchers have been developing systems for crops such as tomatoes, forage, sugar cane, citrus, and coffee. A yield monitoring system for pull type dry edible beans harvester has not yet been developed. The goal of this project was to design and test a drive torque measurement device on a clean grain bucket elevator of a dry bean harvester, and evaluate its potential to be used as a mass flow sensor. Tests were conducted in the Yield Monitor Test Facility (YMTF) of University of Kentucky following the recommendation of ASABE Standard S578 (2007) The …

Estimating Water Application Efficiency For Drip Irrigation Emitter Patterns On Banana, Alisson Jadavi Pereira Da Silva, Eugênio Ferreira Coelho, Jarbas Honorio De Miranda, Stephen Ray Workman

Biosystems and Agricultural Engineering Faculty Publications

The objective of this work was to evaluate root and water distribution in irrigated banana (Musa sp.), in order to determine the water application efficiency for different drip irrigation emitter patterns. Three drip emitter patterns were studied: two 4-L h^-1 emitters per plant (T1), four 4-L h^-1 emitters per plant (T2), and five 4-L h^-1 emitters per plant (T3). The emitters were placed in a lateral line. In the treatment T3, the emitters formed a continuous strip. The cultivated area used was planted with banana cultivar BRS Tropical, with a 3-m spacing between rows and a …

Packing Factors Of Feed Products In Storage Structures, Samuel G. Mcneill, Michael D. Montross, Sidney A. Thompson, I. Joseph Ross, Thomas C. Bridges

Biosystems and Agricultural Engineering Faculty Publications

Experiments were conducted to measure the changes in bulk density of cracked corn, corn meal, soybean meal, cotton seed meal, and distillers dried grain (without solubles) when subjected to simulated overburden pressures. All materials were tested at two moisture content levels (approximately 8% and 12% w.b.) and seven pressures between 0 and 69 kPa (0 and 10 psi). A mathematical model was fitted to the data to predict the bulk density of each feed ingredient as a function of pressure and moisture content. These relationships were inserted into a previously developed computer model to predict ingredient packing within conventional storage …

Corn Stover Availability And Collection Efficiency Using Typical Hay Equipment, Robert M. Prewitt, Michael D. Montross, Scott A. Shearer, Timothy S. Stombaugh, Stephen F. Higgins, Samuel G. Mcneill, Shahab Sokhansanj

Biosystems and Agricultural Engineering Faculty Publications

Corn stover has been identified as a potential feedstock for the production of fermentable sugars and thermochemical processes. The availability and efficiency of typical hay equipment for collecting corn stover has not been well quantified. Corn stover was collected for two years on a central Kentucky farm near Louisville. Six different harvesting treatments, using traditional hay equipment, were used to harvest corn stover. A rotary mower, rotary scythe (flail-type mower with windrow-forming shields), parallel bar rake, and a round baler were utilized. The average stover moisture content prior to grain harvest was above 40%, and field drying was required before …

Spatial Variation Of Protein, Oil, And Starch In Corn, Samuel G. Mcneill, Michael D. Montross, Scott A. Shearer

Biosystems and Agricultural Engineering Faculty Publications

Significant spatial yield variations are known to exist in cornfields with different soil types, topsoil depth, and other variables. Similarly, variations might also be found among the highly valued chemical components (oil, protein, and starch) in corn kernels due to local differences in soil type, fertility, acidity/pH, organic matter, etc. This study quantified the spatial variability of protein, oil, and starch content of corn from two conventional cornfields and two high-oil cornfields. Whole ears were harvested by hand from 20 to 40 randomly selected locations within each field. A differential global positioning system (DGPS) receiver recorded the location of each …

Permeability Of Corn, Soybeans, And Soft Red And White Winter Wheat As Affected By Bulk Density, Michael D. Montross, Samuel G. Mcneill

Biosystems and Agricultural Engineering Faculty Publications

Darcy’s law is a function of viscosity, permeability, and velocity and can be used to predict the airflow resistance in granular materials at low air velocities. Permeability also governs the magnitude of natural convection currents during periods of non-aerated grain storage. The permeability of corn, soybeans, soft white winter wheat, and soft red winter wheat were measured as a function of bulk density and moisture content. Air was passed through a column of grain and the flow rate and pressure drop measured. Bulk density and kernel density were also measured to determine the porosity of grain in the test column. …

Airflow Resistance Of Seeds At Different Bulk Densities Using Ergun's Equation, Marek Molenda, Michael D. Montross, Samuel G. Mcneill, Jozef Horabik

Biosystems and Agricultural Engineering Faculty Publications

Airflow resistance of grains and oilseeds has been extensively studied. Traditionally the data has been presented using Shedd’s curves. However, this assumes that airflow resistance is independent of grain depth. Grain undergoes compaction during storage that changes the bulk density, porosity, and therefore the airflow resistance. Ergun’s equation is a function of particle size and porosity of the granular material. Airflow resistance by Ergun’s equation was used to predict the pressure drop across a column of corn, soft white winter wheat, soft red winter wheat, and soybeans at three moisture content levels and two bulk densities. The maximum root mean …

Crop Yield Response To Precision Deep Tillage, Larry G. Wells, Timothy S. Stombaugh, Scott A. Shearer

Biosystems and Agricultural Engineering Faculty Publications

Experimental precision deep tillage was applied at three sites in central Kentucky with relatively well-drained silt loam soils in no-till crop production. Fields were divided into 0.4 ha (1 ac) grid cells using DGPS mapping. Assessment of soil compaction by machinery traffic was made using multiple soil cone penetrometer measurements and expressed as cone index (CI). Corn, wheat, and soybean yields were depressed in grid cells with CI_avg ≥ 1.5 MPa (218 psi) prior to application of tillage treatments at sites 1 and 3, whereas at site 2, where most of the highest average CI values ranged from 1.44 …

Aeration Strategies And Fan Cost Comparisons For Wheat In Mid-South Production Regions, Thomas C. Bridges, Michael D. Montross, Samuel G. Mcneill

Biosystems and Agricultural Engineering Faculty Publications

Numerous factors influence the sizing of aeration fans for summer-harvested crops. Thirty years of weather data for Lexington, Kentucky, were analyzed and the cost of aeration was compared for two axial fans (afan1, afan2) and one centrifugal fan (cfan1). Aeration costs were defined as the sum of the following components: the cost of owning the fan, the cost of electricity for operating the fan, a cost for wheat shrinkage during aeration, and a cost for dry matter loss (DML). The fans were selected to deliver airflow rates of approximately one, two, and three times the recommended aeration rate of 0.11 …

A Reduced–Cost Mechanized System For Handling And Curing Mechanically–Harvested Burley Tobacco, Greg A. Camenisch, Larry G. Wells, Timothy D. Smith, George A. Duncan

Biosystems and Agricultural Engineering Faculty Publications

An experimental system was tested in which mechanically harvested burley tobacco plants placed onto steel slotted receivers were retrieved from a field, transported to a field curing structure, and placed onto the structure for air curing by a single worker. The system consisted of a tractor–towed, trailer mechanism that engaged and hoisted loads of approximately 360 burley plants of approximately 1 Mg mass. Ten slotted steel rails, 3.05 m long, holding 36 notched plants were placed onto parallel wooden beams suspended at a height of 2.13 m by wooden posts set in the ground. Burley tobacco was cured in this …

Reconditioning Corn And Soybeans To Optimal Processing Moisture Contents, Michael D. Montross, Dirk E. Maier

Biosystems and Agricultural Engineering Faculty Publications

Experimental trials were carried out to evaluate the technical feasibility of reconditioning overly dry corn and soybeans to optimal market and processing moisture contents. Data obtained from experimental trials were used to validate an aeration simulation model. This model was used to evaluate the feasibility of reconditioning soybeans and corn. Reconditioning of grain was feasible at low airflow rates (0.11 m³ min^–1 t^–1) over a six-month period when an automatic aeration controller was used. Using downflow aeration and monthly unloading of the bin allowed for the greatest net economic gain. Predicted reconditioning in Des Moines, Iowa, …

Simulated Performance Of Conventional High-Temperature Drying, Dryeration, And Combination Drying Of Shelled Corn With Automatic Conditioning, Michael D. Montross, Dirk E. Maier

Biosystems and Agricultural Engineering Faculty Publications

Combination drying, based on computer simulation, was evaluated as an alternative drying technique to traditional high-temperature drying and dryeration. Simulation models of high-temperature crossflow drying and in-bin drying and conditioning were used to evaluate the performance of conventional crossflow drying and full-heat crossflow drying followed by dryeration or natural-air drying for Indianapolis, Indiana, and Des Moines, Iowa. Energy costs from propane, electricity, moisture shrink below the market moisture content, and dry matter loss were estimated to find the total average drying cost over 29 years. Dryeration and combination drying reduced the total drying cost by approximately 10% compared to conventional …

Evaporation Reduction Potential In An Undisturbed Soil Irrigated With Surface Drip And Sand Tube Irrigation, Masoud Meshkat, Richard C. Warner, Stephen R. Workman

Biosystems and Agricultural Engineering Faculty Publications

The efficiency of drip irrigation is highly dependent on evaporation losses occurring from the constantly saturated soil beneath emitters. Advent of subsurface drip irrigation is in part an approach to curb this inefficiency. An irrigation method, Sand Tube Irrigation (STI), is proposed to increase the efficiency of “Normal” surface applied drip Irrigation (NI method) on permanent tree crops without the need for burying the irrigation tubing. The sand tube consists of removing a soil core beneath the emitter and filling the void with coarse sand. A weighing lysimeter was constructed in the laboratory and instrumented to directly measure temporal evaporation …