Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 13 of 13

Full-Text Articles in Molecular, Cellular, and Tissue Engineering

The Development Of A Novel Cartilage Analog Scaffold For Chondral Regeneration, Vishal Thomas Aug 2024

The Development Of A Novel Cartilage Analog Scaffold For Chondral Regeneration, Vishal Thomas

All Dissertations

Focal Chondral Defects (FCDs) are cartilage injuries that affect about 900,000 Americans every year. Left untreated, these may lead to osteoarthritis and eventually necessitate painful knee replacements. Current treatment options are limited in terms of durability, cost, and availability of grafts. Tissue engineering, using natural scaffolds, are a highly attractive alternative promising cost efficiency, abundance, and long-term benefits. However, their low mechanical strength and dense matrices are impediments that could lead to sub-optimal repair.

In this work, a natural biomaterial, the bovine nucleus pulposus (bNP), derived from intervertebral disc tissue, was identified as a candidate scaffold for cartilage regeneration. Mechanical …


Investigation Of The Effect Of Preparation Parameters On The Structural And Mechanical Properties Of Gelatin/Elastin/Sodium Hyaluronate Scaffolds Fabricated By The Combined Foaming And Freeze-Drying Techniques, Mansour Qamash, S. Misagh Imani, Meisam Omidi, Ciara Glancy, Lobat Tayebi Jan 2024

Investigation Of The Effect Of Preparation Parameters On The Structural And Mechanical Properties Of Gelatin/Elastin/Sodium Hyaluronate Scaffolds Fabricated By The Combined Foaming And Freeze-Drying Techniques, Mansour Qamash, S. Misagh Imani, Meisam Omidi, Ciara Glancy, Lobat Tayebi

Electrical & Computer Engineering Faculty Publications

This paper aimed to evaluate the effects of different preparation parameters, including agitation speed, agitation time, and chilling temperature, on the structural and mechanical properties of a novel gelatin/elastin/sodium hyaluronate tissue engineering scaffold, recently developed by our research group. Fabricated using a combination of foaming and freeze-drying techniques, the scaffolds were assessed to understand how these parameters influence their morphology, internal microstructure, porosity, mechanical properties, and degradation behavior. The fabrication process used in this study involved preparing a homogeneous aqueous solution containing 8% gelatin, 2% elastin, and 0.5% sodium hyaluronate (w/v), which was then subjected to mechanical agitation at speeds …


Effect Of Human Decellularized Skeletal Muscle On Recovery From Volumetric Muscle Loss Injury, Jacob Schluns May 2023

Effect Of Human Decellularized Skeletal Muscle On Recovery From Volumetric Muscle Loss Injury, Jacob Schluns

Graduate Theses and Dissertations

Volumetric muscle loss (VML) overwhelms muscle’s robust capacity for regeneration. A key event in the etiology of VML injury is the bulk loss of structural cues provided by the underlying extracellular matrix (ECM). While muscle is a highly structured tissue, with cell and ECM alignment in the direction of contractile force production, the impact of scaffold alignment on recovery remains unclear. Bulk human decellularized skeletal muscle (DSM) tissues were sectioned into 10 x 1-2 mm fibers. VML defects were repaired using multi-fiber implants consisting of approximately 8 fibers per defect arranged into two layers. Fibers were oriented 1) to the …


Synthesis And Performance Testing Of Ecm Fiber Scaffolds, Cassandra Reed Jul 2021

Synthesis And Performance Testing Of Ecm Fiber Scaffolds, Cassandra Reed

Graduate Theses and Dissertations

The progression of regenerative medicine has advanced the treatment of multiple illnesses and injuries throughout the years. A good example of the benefits of this research is the work that has gone into volumetric muscle loss (VML), where more than 20% of the muscle is loss. Skeletal muscle makes up 40% of the human body so a loss of that size greatly diminishes the strength, the flexibility, physiology, and quality of life of the injured individual. For that reason, various techniques are used to counteract the loss of structure and innate cellular signaling in order to circumvent that from happening. …


Quantifying Mafenide Release From 3d Printed Phenylalanine-Coumarin Copolyester Scaffolds, Jacob Seeh Jan 2021

Quantifying Mafenide Release From 3d Printed Phenylalanine-Coumarin Copolyester Scaffolds, Jacob Seeh

Williams Honors College, Honors Research Projects

This project addressed burn wound healing through controlled release of the antibacterial drug mafenide encapsulated by a copolyster into 3D printed scaffolds. Scaffolds were printed at 25oC and 0.77-1 bar in a cross-hatch pattern with uniform thickness, distance between parallel layers, and diameter then photo-crosslinked. The number of scaffolds available for testing was limited by the amount of polymer that could be synthesized. A high-performance liquid chromatography method was developed specifically for this experiment and used to determine daily release of mafenide from the scaffold into a 2-mL phosphate buffer solution. During the first 24 hours a large …


Bioengineering Extracellular Matrix Scaffolds For Volumetric Muscle Loss, Kevin Roberts Aug 2019

Bioengineering Extracellular Matrix Scaffolds For Volumetric Muscle Loss, Kevin Roberts

Graduate Theses and Dissertations

Volumetric muscle loss overwhelms skeletal muscle’s ordinarily capable regenerative machinery, resulting in fibrosis and severe functional deficits which have defied clinical repair strategies. My work spans the design and preclinical evaluation of implants intended to drive the cell community of injured muscle toward a regenerative state, as well as the development of an understanding of the molecular responses of this cell community to biomaterial interventions. I demonstrate a new class of biomaterial by leveraging the productive capacity of sacrificial hollow fiber membrane cell culture; I show specifically that unique threads of whole extracellular matrix can be isolated by solvent degradation …


Pressure Cylinder Controlled Release Valve, Alexa Dominique Balbuena Mar 2019

Pressure Cylinder Controlled Release Valve, Alexa Dominique Balbuena

Biomedical Engineering

This project aims to integrate an automatic gas release system in a pre-existing scaffold fabrication process for tissue engineering applications.

To form the proper scaffold structure, the fabrication process is heavily influenced by the change in its surrounding pressure. The current production involves a pressure transducer and electric valve that is managed manually to create a suitable pressure environment for the scaffold. This method, although functional, proves to be ineffective when creating several batches; the user needs to constantly monitor the developing pressure profile and alter voltage parameters accordingly to create a linear gas release under a predetermined slope.

To …


Using Crosslinked Hyaluronic Acid (Ha) And Collagen Scaffolds With Sustained Brain-Derived Neurotrophic Factor (Bdnf) Release For Post-Sci Nerve Regeneration, Panth Doshi Jan 2018

Using Crosslinked Hyaluronic Acid (Ha) And Collagen Scaffolds With Sustained Brain-Derived Neurotrophic Factor (Bdnf) Release For Post-Sci Nerve Regeneration, Panth Doshi

Undergraduate Research Posters

Traumatic events resulting in spinal cord injuries (SCIs) often leave people paralyzed or with partial loss of motor function. The physical disabilities arising from traumatic events prevent people from functioning at the same level as pre-injury. My work aims to identify a plausible method to overcome the inhibitory post-SCI environment and to regenerate nervous tissue in order to restore neural function and, subsequently, motor function. I identified components of a new, hypothetical nerve scaffold based on the immune response after SCIs and the efficacy of currently used scaffolds for nerve regeneration. Hyaluronic acid (HA) polymer scaffolds and collagen-based scaffolds are …


When 1 + 1 > 2: Nanostructured Composites For Hard Tissue Engineering Applications, Vuk Uskoković Dec 2015

When 1 + 1 > 2: Nanostructured Composites For Hard Tissue Engineering Applications, Vuk Uskoković

Pharmacy Faculty Articles and Research

Multicomponent, synergistic and multifunctional nanostructures have taken over the spotlight in the realm of biomedical nanotechnologies. The most prospective materials for bone regeneration today are almost exclusively composites comprising two or more components that compensate for the shortcomings of each one of them alone. This is quite natural in view of the fact that all hard tissues in the human body, except perhaps the tooth enamel, are composite nanostructures. This review article highlights some of the most prospective breakthroughs made in this research direction, with the hard tissues in main focus being those comprising bone, tooth cementum, dentin and enamel. …


Construction Of 3d Biomimetic Tissue Niches For Directing Pancreatic Lineage Differentiation Of Human Embryonic Stem Cells, Weiwei Wang Aug 2014

Construction Of 3d Biomimetic Tissue Niches For Directing Pancreatic Lineage Differentiation Of Human Embryonic Stem Cells, Weiwei Wang

Graduate Theses and Dissertations

The potential of human embryonic stem cells (hESCs) to differentiate into insulin producing beta cells offers great hope for cell-based therapy for diabetes treatment. However, in vitro pancreatic differentiation of hESCs remains challenging. In the past decade, most protocols for differentiating pancreatic cells have been focused on the use of signaling molecule cocktails on 2D substrates. Studies on embryonic development biology strongly suggest that extracellular matrix (ECM) plays a critical role on hESCs behavior. In this work, we first established a 3D collagen scaffold culture system for hESCs differentiating into definitive endoderm (DE), which is the first and most important …


Design Of Experimentation To Systematically Determine The Interaction Between Electrospinning Variables And To Optimize The Fiber Diameter Of Electrospun Poly (D, L-Lactide-Co-Glycolide) Scaffolds For Tissue Engineered Constructs, Yvette S. Castillo Jun 2012

Design Of Experimentation To Systematically Determine The Interaction Between Electrospinning Variables And To Optimize The Fiber Diameter Of Electrospun Poly (D, L-Lactide-Co-Glycolide) Scaffolds For Tissue Engineered Constructs, Yvette S. Castillo

Master's Theses

Cardiac disease causes approximately a third of the deaths in the United States. Furthermore, most of these deaths are due to a condition termed atherosclerosis, which is a buildup of plaque in the coronary arteries, leading to occlusion of normal blood flow to the cardiac muscle. Among the methods to treat the condition, stents are devices that are used to restore normal blood flow in the atherosclerotic arteries. Before advancement can be made to these devices and changes can be tested in live models, a reliable testing method that mimics the environment of the native blood vessel is needed. Dr. …


A Novel In-House Design Of A Bioreactor For The Modeling Of An In Vitro Blood Brain Barrier Model, Ian Mahaffey Jan 2012

A Novel In-House Design Of A Bioreactor For The Modeling Of An In Vitro Blood Brain Barrier Model, Ian Mahaffey

Biomedical Engineering

The blood brain barrier is the protector of the central nervous system and a physical barrier that functions to regulate the substances that can pass in and out of the brain; it is the function and integrity of this system that keeps the homeostasis of the central nervous system. Yet this shield against foreign invaders in the blood also prevents drugs designed for treatment of various ailments of the central nervous system from reaching their target in the brain. Developing drugs that can pass through this barrier, and understanding it’s function has become an area of increasing interest. Many researchers …


Preparation And Characterization Of Electrospun Poly(D, L-Lactide-Co-Glycolide) Scaffolds For Vascular Tissue Engineering And The Advancement Of An In Vitro Blood Vessel Mimic, Tiffany Richelle Pena Jun 2009

Preparation And Characterization Of Electrospun Poly(D, L-Lactide-Co-Glycolide) Scaffolds For Vascular Tissue Engineering And The Advancement Of An In Vitro Blood Vessel Mimic, Tiffany Richelle Pena

Master's Theses

PREPARATION AND CHARACTERIZATION OF ELECTROSPUN POLY(D,L-LACTIDE-CO-GLYCOLIDE) SCAFFFOLDS FOR VASCULAR TISSUE ENGINEERING AND THE ADVANCEMENT OF AN IN VITRO BLOOD VESSEL MIMIC

Tiffany Richelle Peña

Currently, an estimated 1 in every 3 adult Americans are affected by one or more cardiovascular complications. The most common complication is coronary artery disease, specifically atherosclerosis. Outcomes of balloon angioplasty treatments have been significantly improved with the addition of drug eluting stents to the process. Although both bare metal and drug eluting stents have greatly increased the effectiveness of angioplasty and decreased the occurrence of restenosis, several complications still exist. For this reason, the stent …