Molecular, Cellular, and Tissue Engineering Commons^™

Cardiac Twitch Force Measurement System, Tara Hoffman, Sebastian Carrascal Gómez, Julian Macdonald

Biomedical Engineering

The goal of this project is to develop a low-cost and accurate force measurement system and method of measurement to be used in the testing of grown cardiac tissue samples. The primary stakeholder in this project is Dr. Luke Perreault, a biomedical engineering professor at California Polytechnic State University San Luis Obispo who is studying grown cardiac tissue rings, and any of his student lab personnel. Other stakeholders include other researchers in the tissue engineering field who require a similar form of testing to the methods developed in this project.

This document will introduce the identified problem and background as …

Modeling Structural Support To Facilitate Novel Treatments Of Degenerative Disc Disease, Jose Luis Calderon

Poster Presentations

Over 600 million people worldwide suffered from low back pain in 2020, with projections for 2050 being over 800 million [1]. Annual costs associated with low back pain total over 450 billion dollars in the US alone [2]. This research serves as a proof-of-concept for the use of structural supports to facilitate intervertebral disc healing. This treatment would involve the implementation of these supports along with existing injection treatments to promote regeneration. In both models, along with the combined model, the ability for these supports to alleviate intervertebral disc height loss is shown. This indicates that these supports would serve …

Quantitative Fluorescence Imaging Using A Paired Agent Approach For Improving Surgical Decision Making, Sanjana Pannem

Dartmouth College Ph.D Dissertations

Surgical resection remains to be the cornerstone of treatment for most solid tumors, where the primary objective is to remove all visible and microscopic disease. However, the extent of tumor resection is inherently limited by the surgeon’s ability to distinguish tumor from normal tissue, intraoperatively. As a result, positive surgical margins (PSM), where residual tumor remains after surgery, are a common occurrence and are associated with increased recurrence, need for adjuvant therapies, dismal patient outcomes, and high healthcare costs.

Fluorescence guided surgery (FGS) has emerged as a promising technique to enhance intraoperative visualization of tumors and may help reduce the …

Stentrx, Emma Barna, Minuthi Cooray, Bruce Newlands, Joseph A. Sabetta

Williams Honors College, Honors Research Projects

This project aims to develop a biodegradable, drug-eluting biliary stent for the treatment of biliary cancers. Current metal stents that restore bile flow bit are non-degradable, prone to migration, and unable to deliver drugs locally. The proposed stent will be biocompatible, biodegradable, and capable of controlled drug release to both maintain bile flow and treat tumors. The end goal is to produce a functional prototype that can be deployed via a minimally invasive catheter and maintain bile duct patency for at least three months. The project is expected to be involved in the NEOMED Bench-to-Bedside competition and provisionally patented.

Design And Validation Of A Novel Patterned Microfluidic Culture Platform For Hipsc-Cm Maturation, Anisia Gabriela Țiplea

Dartmouth College Master’s Theses

Adult cardiomyocytes (CMs) are among the most challenging cells to culture in vitro, given their poor adherence to plastic culture wells and poor maturation outside the native extracellular matrix (Narkar et al., 2022). Human induced pluripotent stem cell-derived CMs (hiPSC-CMs) offer a viable alternative to study heart development and disease progression. While not comparable to adult CMs in their maturity (Narkar et al., 2022), they mimic the clinical phenotypes of heart failure and are more feasible to culture. Nevertheless, hiPSC-CMs require specialized culture conditions that cannot be achieved with 2D static culturing, which fail to replicate native tissue environments (X. …

Efficacy Of Mitophagy Inhibition As A Potentiating Agent For Conventional Chemotherapy, Morghan Relich, Shelby Bess

Biomedical Engineering Undergraduate Honors Theses

Cancer is a result of uncontrolled growth and reproduction of cells. Damaged or abnormal cells grow and multiply when they should not and in turn the cells continue to proliferate and metastasize. Malignant cells rely on functional mitochondria for proliferation, metastasis, and survival. These mitochondria maintain a functional mitochondrial network through a quality control mechanism called mitophagy. Mitophagy is a conserved intracellular process to maintain quality control and remove damaged mitochondria.

Previous research has been done to examine the effects of mitophagy in tumor cells, as well as the effects of mitophagy inhibition. One focus of current research has been …

Development Of Translational Microscale Systems To Interrogate How Biophysical And Biochemical Cues Alter The Phenotype Of Hormone Positive Breast Cancer, Braulio Ortega Quesada

All Dissertations

Cancer is a complicated disease and one in every three diagnoses are women with breast cancer. Recent research shows that the progression of cancer depends strongly on interactions with other non-cancerous cells and non-cellular components. Metastasis, the spread of cancer to other parts of the body, is a key step in cancer progression and makes treatment harder, leading to poor response to treatments culminating in death in ~90% of patients. This dissertation focused on creating a series of microdevices as novel pre-clinical models of breast cancer. Two different devices were fabricated to (1) study how exposing cancer cells to the …

In Vitro Microfluidics System For Mechanobiologic Investigations, Michael A. Daanen

Honors Theses

Mechanobiology is an emerging field that aims to study the relationships between mechanical forces and cellular behavior. Such mechanobiological relationships are especially critical in the cardiovascular system, where endothelial cells lining the vasculature align in response to fluid shear stresses from blood flow (Sinha, 2016). Implanted flow devices, diabetes, chronic hypertension, and various other diseases and pathophysiologies alter vessel geometries and flow dynamics. Such alterations impact fluid shear stress and endothelial cell behavior, leading to microcirculatory dysfunction, vessel leakage, and organ failure (Poredos, 2021; Papadaki, 1999; Leitschuh, 1987). To simulate dysfunctional endothelial cell behavior in vitro and evaluate novel therapeutic …

Sdf-1Α Mediates Primary Tumor Escape In Glioblastoma Through Activation Of Mesenchymal Transitions, Charles T. Froman-Glover

The Cardinal Edge

Glioblastoma (GBM), a highly aggressive primary brain tumor originating in glial cells, poses a significant challenge due to its rapid growth and invasive nature within healthy brain tissue.

Current treatments involve surgical resection, chemotherapy, and radiation. These treatments alone are not enough to cure this disease, and a better understanding of the mechanics of the tumor's micro-environment is imperative to furthering the field of cancer research. This research focuses on understanding the tumor microenvironment's impact, specifically investigating the role of stromal cell-derived factor 1 (SDF-1) mechanics on GBM aggressiveness. SDF-1 is known to facilitate disease progression by facilitating chemotaxis toward …

Use Of Electrical Bone Growth Stimulators In High-Risk Patients Following Spinal Fusion, Soumya Malhotra, Khavir Sharieff

HCA-NSU MD Research Day

Title: Use of Electrical Bone Growth Stimulators in High-Risk Patients Following Spinal Fusion Authors: Soumya Malhotra, BA., MS1 & Khavir Sharieff, DO, MBA2 1Class of 2027, Nova Southeastern University Dr. Kiran C. Patel College of Osteopathic Medicine, Fort Lauderdale, FL 2Assistant Professor of Surgery, Nova Southeastern University Dr. Kiran C. Patel College of Osteopathic Medicine, Tampa Bay, FLNova Southeastern University Dr. Kiran C. Patel College of Osteopathic Medicine Objective: This study aimed to elucidate the advantages of EBGSs following high-risk spinal fusions. Background: Pseudarthrosis is a condition where bones fail to fuse after an injury or surgery. It causes significant …

Hypoxic Incubator: Improving Robustness/Reliability And Demonstrating Physiological Efficacy, Damon Dennis Tan

Master's Theses

The Microphysiological Systems Laboratory aims to develop colorectal cancer tumor models under a hypoxic environment to assess model response to pharmaceutical compounds in vitro. To perform relevant studies, researchers have attempted to use different hypoxic inducing strategies such as a nitrogen pod and hypoxic incubator to recreate in vivo physiological responses to hypoxia. However, studies would be interrupted due to incubator functionality failure. To ensure successful and physiologically relevant studies, I improved and verified the robustness and reliability of a hypoxic incubator previously designed and manufactured in the lab. Through the testing and iterating design processes, I engineered and implemented …

Manufacturing Silicone In-House For The Creation Of Customized Neurovascular Blood Vessel Mimics, Jacob Wilbert Perisho

Master's Theses

The Tissue Engineering Lab at California Polytechnic State University San Luis Obispo focuses on creating tissue-engineered Blood Vessel Mimics (BVMs) designed for the preclinical testing of neurovascular devices. These BVMs are composed of silicone models, representing anatomically accurate neurovasculatures, that are sodded with vascular cell types and then cultivated in bioreactors (which maintain physiologic conditions). These silicone models are currently sourced externally from industry partners, so the primary goal of this thesis was to develop the means and methods for the Tissue Engineering Lab to manufacture silicone models in-house.

The first aim of this thesis was to develop and explore …

Development Of An In Vitro 3-Dimensional Co-Culture Human Colorectal Cancer Model In Microfluidic Devices, Abby Jens

Master's Theses

Colorectal cancer is the second most common cause of cancer-related deaths in the United States, with the relative 5-year survival rate for distant stage cancer being only 14%. The most common treatment for colorectal cancer is with chemotherapeutic drugs; however, the discovery of these drugs is costly, time-consuming, and often requires the use of animal models that do not yield results that translate to clinical trials. Due to these shortcomings, researchers seek to develop physiologically relevant in vitro tumor models that more accurately mimic the tumor microenvironment for cheaper and faster high-throughput drug screening. The aim of this research was …

Cellular Level Changes Induced In Cancer Cells Due To Microgravity, Sai Deepika Reddy Yaram

Graduate Theses, Dissertations, and Problem Reports (ETD)

The increase in human activity in space has revealed several kinds of physiological challenges brought on by the absence of Earth's gravitational pull. NASA observed that during spaceflight, astronauts experience a 1-1.5% monthly loss in the mineral density of weight-bearing bones, with rehabilitation efforts on Earth often proving ineffective. This issue extends to muscles, the neuro vestibular system, the cardiovascular system, and vision. Cancer has emerged as a significant cause of mortality among astronauts, with studies up to 2017 showing that 41.3% of natural cause deaths among U.S. astronauts were due to cancer, primarily due to space radiation exposure. Cancer …

Air-Jet Bioprinting Of Stem Cell-Encapsulated Alginate Micro-Droplets For Organoid Biomanufacturing, Mirabella B. Stump

Electronic Theses and Dissertations

Biomanufactured 3D-organoids show promise for modeling and treating various conditions, particularly insulin-dependent diabetes mellitus (type-1 diabetes). Pancreatic islet organoids serve as sustainable sources of insulin-producing β-cells, potentially restoring insulin regulation in patients and providing a long-term solution for diabetes. Hydrogel droplet printing is an emerging technique in regenerative medicine due to its advantageous tunability and biocompatibility; however, challenges of consistency, quality control, and scalability persist. To address these issues, we developed a novel air-jetting based droplet bioprinting system for the generation of monodispersed alginate micro-droplets. The objective of this project was to incorporate human induced pluripotent stem cells (hiPSCs) into …

Tissue-Engineered Models For Investigating Nerve Infiltration In Fibrotic Microenvironments, Nikolas Ala-Kokko

Graduate Theses and Dissertations

Neuron infiltration is involved in a multitude of diseased states and is critical in the regeneration of physiologic conditions. Modeling of innervation in three-dimensional, heterogenous, environments would allow early investigation in the crosstalk of neurons and native cells in normal and pathophysiologic microenvironments to gain an understanding of mechanistic functions. This would allow for greater insight into the role of metabolism, cell adhesion, microenvironmental alternations, cellular crosstalk, and signaling pathways that play a role in the promotion and prevention of neurite growth. In this thesis, with the construction of collagen-based hydrogels as the foundation for cell culture, we investigate cell …

Experimental And Computational Platforms For Studying Systems Mechanobiology, Brendyn Miller

All Dissertations

Mechanical stimulation through physical activity has been shown to play an important role in treating and preventing several non-communicable diseases such as hypertension, lower back pain (LBP), type-2 diabetes mellitus, and several cancers. This is accomplished through the regulation of cellular behavior and tissue remodeling within the body at both the micro- and macro-scale levels. The goal of mechanobiology research is to gain in-depth knowledge and understanding of how cells sense physical forces in conjunction with other biochemical cues and translate those factors into important biological functions that either maintain tissue homeostasis or lead to pathological states. Understanding these processes …

Development Of Air-Jetting System For Bioprinting Of Alginate Micro-Droplets, Nathan Lingenfelter

Electronic Theses and Dissertations

Transplantation of organoids has been demonstrated to be a promising cure to many diseases including Type-1 diabetes. However, achieving consistent and robust derivations of mature organoids from human pluripotent stem cells (hPSCs) is challenging. Cellular mechano-transduction, where mechanical stimuli is sensed and converted to biochemical signaling, has been proposed to overcome this challenge. This pathway relies on encapsulating hPSCs in a small volume of a biomaterial such as alginate, which has been widely used as cell encapsulation materials due to its biocompatibility and selective permeability. In this project, we focused on developing an air-jetting based technique to generate small and …

Novel Microfluidic Devices To Model The Interactions Between Lymphatics And Breast Cancer, Jade Weber

McKelvey School of Engineering Graduate Student Theses & Dissertations

The lymphatic system is responsible for immune circulation and fluid balance in the body. It accomplishes this by draining interstitial fluid from local tissue and transferring it to lymph nodes and back into blood circulation. However, this process is implicated in many pathologies, one of the most dangerous being breast cancer metastasis to the lymph nodes. The largest factor in breast cancer patient mortality is metastasis. Lymphangiogenesis, the growth of new lymphatic vessels, has been thought to play a dynamic role in aiding breast cancer metastasis. Breast cancer tumor cells have been shown to remodel the functionality of local lymph …

In Vitro Bioreactor For Mechanical Control And Characterization Of Tissue Constructs, Samuel Coeyman

All Dissertations

Heart failure (HF) currently affects over 6 million Americans, 50% of whom die within 5 years of their initial diagnosis. A major contributor to the onset of HF is cardiac fibrosis in the myocardium, which arises when fibroblasts (FBs) are activated in response to heightened mechanical stress from overload conditions like hypertension. Activated FBs remodel the extracellular matrix (ECM) and secrete ECM proteins including collagen. FB remodeling has been studied in the past by applying forces and/or deformations to three-dimensional, cell-seeded gels and tissue constructs in vitro. Unfortunately, previous stretching platforms have traditionally not enabled mechanical property assessment to be …

Ultrasound Mediated Tissue Growth In Bioinspired Scaffolds, Marco Fielder

Graduate Theses and Dissertations

Porous scaffolds mechanically stimulated with ultrasound are used for the treatment of bone conditions such as osteoporosis or traumatic bone injury. However, one current issue in these treatment techniques is designing a scaffold structure with a high structural integrity that also does not impede tissue growth. A larger ultrasound wave transmission would also allow more of a scaffold to receive mechanical stimulation from ultrasound. Controlling mesenchymal stem cell seeding of tissue scaffolds also has potential for developing optimal seeding patterns to maximize or control tissue growth in the scaffold based on an individual’s physiology. There is also a need for …

Engineer And Test A Biodegradable Microneedle Patch To Deliver Meloxicam For Managing Pain In Cattle, Katherine Alejandra Miranda Munoz

Graduate Theses and Dissertations

Microneedle patches are a promising source for transdermal diffusion of macromolecules and are designed to painlessly penetrate the skin. In this study, a biodegradable chitosan microneedle patch to deliver meloxicam for managing pain in cattle was tested. The potential of reuse of the polymeric solution to fabricate the patches, optimization of fabrication, morphological analysis of the microneedle patch and analysis of preservation of the chemical composition after sterilization were evaluated. In-vitro analysis consisted of studying in-vitro penetration mechanical properties, compression testing analysis of microneedle patch, and in-vitro drug release analysis. In-vivo studies were performed to analyze the dissolution capability of …

Evaluation Of Cellulose Nanocrystal Inks And Their Structural Characteristics For 3d Bioprinting Of Customized Scaffolds, Patrick William Kuczwara

Graduate Theses and Dissertations

3D bioprinting of biological scaffolds requires control of the physicochemical properties of each unique structures. A promising material for control of properties is hydrogels, which can help create biomimetic scaffolds with controlled spatial arrangement of materials by integrating biological materials directly into layers during the bioprinting process. Nanocellulose offers a unique combination of properties including mechanical, biomimetic, and biocompatibility. These properties offer flexibility over the types, shapes, and applications of their printed hydrogel scaffolds, (i.e., tissue, drug, encapsulation). However, 3D bioprinting of nanocellulose-based hydrogels requires high loading percentages (i.e., >10 wt%) or chemical crosslinkers (i.e., bis(acyl)phosphane oxides (BAPO)). High solid …

Hypoxic Incubation Chamber, Simone Lisette Helfrich, Makenzie Nicole Jones

Biomedical Engineering: Graduate Reports and Projects

This paper describes the design, manufacturing, and testing of a novel controllable hypoxic incubator with fully functional oxygen gas control and temperature control in a humid environment. On the current market, a majority of the few hypoxic incubators use pre-mixed gas that does not offer precise control over gas concentration. The objective for this project was to create a chamber that allows the user to set the O2 concentration to varying set points of % O2 while maintaining the chamber at a constant body temperature, CO2 level, humidity, and sterility. To start the project, multiple concepts were developed for the …

Hypoxic Incubation Chamber, Simone Lisette Helfrich, Makenzie Nicole Jones

Master's Theses

This paper describes the design, manufacturing, and testing of a novel controllable hypoxic incubator with fully functional oxygen gas control and temperature control in a humid environment. On the current market, a majority of the few hypoxic incubators use pre-mixed gas that does not offer precise control over gas concentration. The objective for this project was to create a chamber that allows the user to set the O2 concentration to varying set points of % O2 while maintaining the chamber at a constant body temperature, CO2 level, humidity, and sterility. To start the project, multiple concepts were developed for the …

A Microfluidic Assay For Single Cell Bacterial Adhesion Studies Under Shear Stress, Amanda Trusiak

Electronic Theses and Dissertations

The study of bacterial adhesion to host cells is important in understanding bacterial pathogenesis and developing new therapeutic approaches. Here, we studied bacterial adhesion under shear stress using a novel microfluidic method. Specifically, the adhesion of a uropathogenic E. coli strain (FimHOn, ATCC 700928/CFT073) to mannose-modified substrates was studied under flow conditions. The FimHOn E. coli strain expresses FimH which is a mannose-specific adhesin found on the fimbriae that binds to glycoproteins on the epithelium. We developed a microfluidic method that mimics bacterial adhesion to urothelial cells. First, the microfluidic channels were modified by sequentially adsorbing BSA-mannose and BSA onto …

Sequential Illumination In A Tomographic Microendoscopic Probe For Imaging Tumor Microvasculature, Zachariah Neumeier

Biomedical Engineering Undergraduate Honors Theses

Knowledge of colorectal cancer biology is improving how we approach cancer treatment. Specifically, the tumor microenvironment and abnormal angiogenesis are of particular interest. Optical methods are a prime candidate for research of the tumor microenvironment due to their ability to quantitively assess tissue structure and perfusion in real time. Particularly, the “transport scattering regime” has been identified as a method of obtaining high-resolution images and reflectance spectroscopy data; this light scattering regime has been demonstrated compatible with endoscopic imaging systems. In this study, a proof-of-concept optical imaging system is presented, capable of resolving absorbers within scattering turbid media using a …

The Effects Of Microgravity On Human Endothelial Cells In Relation To Deep Vein Thrombosis, Allie Burgess

Biomedical Engineering Undergraduate Honors Theses

Deep vein thrombosis (DVT) is a condition where blood clots form in one or more of the deep veins of the body, causing leg pain and/or swelling, potentially leading to pulmonary embolism and/or stroke. The incidence of DVT among astronauts serving on the International Space Station has been shown to be greater than that of the general population, calling into question the effects of microgravity on human thrombolytic processes. Additionally, microgravity conditions have been shown to cause muscular atrophy and a decrease in muscle strength and mobility. Because collagen composes a large portion of muscle tissue, this study also assessed …

Modifications Of A Machine To Produce Clinically-Sized Angioplasty Balloons For Bifurcations, Natalie Smith

Biomedical Engineering Undergraduate Honors Theses

Coronary artery disease is the most common form of heart disease and the leading cause of death in the U.S. ("Heart Disease Facts | cdc.gov", 2021). Typically, coronary artery disease is a result of coronary stenosis, constriction of the coronary artery, which can cause heart failure, arrhythmia, or heart attack ("Coronary Artery Disease: Prevention, Treatment and Research", 2021). Angioplasty balloons are a common treatment method for coronary stenosis and work by placing a stent at the lesion site to widen the vessel and promote blood flow. A type of lesion which remains particularly difficult and relatively common to treat is …

Clot Analogs For The Development Of Improved Treatment Methods In Ischemic Stroke, Charles A. Rieth

Biomedical Engineering Undergraduate Honors Theses

According to the CDC, nearly 800,000 individuals experience stroke each year in the United States [1]. Greater than 70% of strokes are of ischemic etiology and involve the occlusion of key arteries in the cardiovascular system [2]. Tissue plasminogen activator (IV-tPA) is the current gold standard for thrombolytic approaches [3]; however, this therapeutic is only effective between 3 and 4.5 hours from the patient’s last know well [4]. As a result, less than 5% of acute ischemic stroke patients receive IV-tPA. In order to increase the viability of AIS treatment as a whole, it is essential that thrombolytic techniques are …