Biomaterials Commons^™

De Novo Protein Binding To Zinc Oxide Through Biomineralization Pathways, Jean-Mark A. Francis

Theses and Dissertations

De novo proteins are structurally distinct from proteins found in nature and thus capable of having their amino acid sequence modified to accomplish tasks such as increasing protein-nanoparticle binding without unfolding or decomposing. Zinc Oxide nanoparticles are functionally distinct from their bulk counterparts and are widely used as semiconductors in a variety of fields such as medicine and agriculture. With demand for these nanoparticles increasing, environmentally sustainable methods of Zinc Oxide nanoparticle synthesis are being investigated as an eco-friendly alternative to currently utilized but environmentally hazardous chemical and physical techniques. This research investigates the binding characteristics between Zinc Oxide nanoparticles …

Coumarin/Nitrogen-Bearing Heterocyclic Hybridloaded Electrospun Pmma/Pvp Nanofibrous Scaffolds For Accelerating Topical Wound Healing Rates: Synthesis And In Vitro Bio-Evaluation, Samar A. Salim, Mohamed Ali, Tasneem Abed, El Badawy Kamoun

Nanotechnology Research Centre

Coumarin-nitrogen heterocyclic compounds (e.g. quinoline, acridine, and phthalazine) were synthesized by facile reactions and elucidated by FTIR, 1H, and 13C-NMR analyses, which showed consistency with the expected structures. Coumarin-quinoline (drug A)- and coumarin-acridine (drug B)-loaded electrospun PMMA/PVP nanofibrous scaffolds were fabricated using electrospinning techniques. Results showed a successful PMMA/PVP blend, which formed the matrix that was used as the main scaffold for drug loading/release. The drugs (A and B) were encapsulated within the matrix as verified by IR and SEM results. Bio-evaluation through cytotoxicity and anticancer screening was conducted using the MTT assay against lung fibroblast (Wi-38), colon carcinoma (Caco-2), …

Influence Of Fused Deposition Modeling Process Parameters On The Constitutive Model Of Hyperelastic Thermoplastic Polyurethane, Lucas Gallup, Mohamed Trabia, Brendan O'Toole, Youssef Fahmy

Mechanical Engineering Faculty Research

Thermoplastic polyurethanes (TPUs) are suited for fused deposition modeling (FDM) of parts that require high levels of flexibility and strength. Predicting the deformation of TPU parts produced using FDM may be difficult, especially under large deformations, as their constitutive models depend on the printing process parameters. The lack of understanding led to the absence of constitutive models for TPU parts produced using FDM. This work aims to identify accurate hyperelastic constitutive models. Six groups of uniaxial tensile specimens were produced using FDM. These groups were made with variations in two process parameters, which were infill geometry and extrusion nozzle temperature. …

Targeted Drug Delivery: Investigating Protein Corona Behavior, Atharva Markale

Theses

Due to high specificity and less toxicity, nanoparticles have become promising for targeted drug delivery against cancer, although they face challenges when they enter the bloodstream, making their behavior unpredictable. The deposition of proteins on nanoparticles, the protein corona, changes their biosignature, affecting their circulation, drug release potency, targeting ability, and immunogenicity. The continuous exchange of protein layers on a nanoscale is complex to analyze.

Nanoparticle tracking analysis (NTA) is a method to characterize nanoparticles in blood plasma by combining principles of light scattering microscopy and Brownian motion. In this work, time-dependent experiments with plasma were conducted to analyze the …

Engineering Mussel Foot Protein 5 (Mfp5) For Enhanced Adhesive Performance In Tendon And Bone Repair, Ziyue Zhu

McKelvey School of Engineering Graduate Student Theses & Dissertations

This study explores the development of Mussel Foot Protein 5 (MFP5) bioadhesives to improve tendon-to-tendon and tendon-to-bone adhesive outcomes. MFP5, known for its underwater adhesive properties, was synthesized using recombinant techniques and optimized through coacervation and cross-linking. Adhesion tests demonstrated the superior performance of the optimized MFP5 adhesive on the tendon and bone samples. Improved protein concentration testing and purification methods enhanced MFP5 yield and consistency. Future research will focus on further standardization, exploring alternative purification methods, and evaluating the adhesive's performance in animal models. This study lays a foundation for developing robust MFP5-based bioadhesives, potentially revolutionizing surgical repair techniques …

Development Of Glutathione-Responsive Disulfide-Containing Poly(Beta-Amino Esters) With Varied Hydrophilicity And Acrylate Functionality, Anastasiia Aronova

Theses and Dissertations--Chemical and Materials Engineering

Smart biomaterials are becoming promising for therapeutic deliveries due to their ability to respond to changes in the environment. Redox-responsive hydrogels are a promising type of smart polymer that can swell and degrade according to cellular oxidative stress levels. Glutathione, abundant in cells, is crucial in redox-responsive biomaterials, serving as a key reactive molecule. This study explored the degradation kinetics of glutathione-responsive poly(β-amino ester) (PBAE) polymers created through a single-step Michael addition. We examined how disulfide content influences the degradation kinetics of these PBAE networks. Additionally, we investigated how the hydrophilicity and functionality of acrylate affect the degradation of disulfide-containing …

Air-Jet Bioprinting Of Stem Cell-Encapsulated Alginate Micro-Droplets For Organoid Biomanufacturing, Mirabella B. Stump

Electronic Theses and Dissertations

Biomanufactured 3D-organoids show promise for modeling and treating various conditions, particularly insulin-dependent diabetes mellitus (type-1 diabetes). Pancreatic islet organoids serve as sustainable sources of insulin-producing β-cells, potentially restoring insulin regulation in patients and providing a long-term solution for diabetes. Hydrogel droplet printing is an emerging technique in regenerative medicine due to its advantageous tunability and biocompatibility; however, challenges of consistency, quality control, and scalability persist. To address these issues, we developed a novel air-jetting based droplet bioprinting system for the generation of monodispersed alginate micro-droplets. The objective of this project was to incorporate human induced pluripotent stem cells (hiPSCs) into …

The Biological Activity Of Dual-Responsive Glycopolymers For Intracellular Codelivery Of Antigen And Lipophilic Adjuvant, Micaela Shields

Honors Theses

Subunit vaccines present themselves as an attractive alternative to traditional approaches to vaccines, which utilizes whole organisms to trigger an immune response. While these traditional approaches have proven themselves reliable within the history of vaccinations, they generally deliver subpar robust cellular-mediated immunity and pose many safety risks. Composed of proteins and /or peptides, subunit vaccines are safer and more precise alternatives to traditional approaches. However, the pharmacokinetic properties of the macromolecules that make up these vaccines hinder the subunit vaccine’s level of immunogenicity [d1] Examples of this hindrance include but are not limited to aggregation at the injection site and …

Comparing Firocoxib And Meloxicam In The Application Of Microneedle Patch For Transdermal Drug Delivery, Ruohan Li

Chemical Engineering Undergraduate Honors Theses

This thesis compares the performance of meloxicam and firocoxib in the aspects of its physical characteristic, chemical compositions, and in-vitro performances for transdermal pain management microneedle patches on farm animals. The microneedle patches are composed of polyvinyl alcohol (PVA), type I collagen (COL), and chitosan (CHI) as base material that carries NSAIDs to achieve therapeutic purposes. Scanning electron microscopy (SEM) was utilized to observe the morphological and physical characteristics of the microneedle patches. Both meloxicam and firocoxib microneedle patches were successfully prepared using the methodology, with organized microneedle distribution and sizing. And Fourier transform infrared spectroscopy (FTIR) confirmed the chemical …

Polymeric Biomaterials Approaches For Engineering The In Vitro Cellular Microenvironment For Mscs, Mahsa Letter-Mahsa Haseli

Graduate Theses and Dissertations

Cell therapy is a technology that relies on replacing diseased or dysfunctional cells with healthy functioning ones. One of the cells used for such advanced therapies are stem cells, owing to their ability to differentiate into specific cells required for repairing damaged or defective tissues or cells. The majority of cell-based products are intended to transiently persist in the patient, secreting factors which then allow the patient’s body to heal; in these products, the cells are subsequently eliminated from the body. Furthermore, unique manufacturing platforms, in addition to novel commercialization strategies, will be required to create a successful, sustainable cell …

Leveraging Cell-Substrate Adhesion And Cell Migratory Properties In Skeletal Muscle Constructs And Cancer Metastasis Assays, Lauren E. Mehanna

Theses and Dissertations--Chemical and Materials Engineering

Volumetric muscle loss (VML) remains one of the few skeletal muscle injuries without a reliable and repeatable treatment. In large volume muscle injuries, muscle fibers as well as the surrounding connective tissue are damaged, preventing therapeutic muscle stem cells, called myogenic progenitor cells (MPCs), from reaching the injury site and initiating repair. There is a clinical need to rapidly fabricate in vitro muscle tissue constructs that mimic the native tissue organization, with aligned myotubes, for insertion and integration at the patient’s injury site. In this dissertation, we utilize the MPC’s natural propensity to close gaps across an injury site to …

Development Of Enzyme-Responsive Polymersomes As A Drug Delivery System For Gm1 Gangliosidosis, Bipin Chakravarthy Paruchuri

All Dissertations

GM1 gangliosidosis is a lysosomal storage disorder caused by deficiency of β-galactosidase (βgal) and subsequent accumulation of GM1 ganglioside in lysosomes. The rare nature of this disorder presents challenges with prognosis and treatment. Enzyme replacement therapy (ERT) can effectively treat systemic deficiencies, but the intravenously administered enzyme cannot cross the blood-brain barrier (BBB) to treat the central nervous system. A delivery system to encapsulate and deliver the enzyme can facilitate enzyme transport across the BBB with suitable surface modifications. One of the pathological aspects of GM1-affected cells is the upregulation of the lysosomal enzyme hexosaminidase A (HexA). In this dissertation, …

Drug-Facilitated Sexual Assault At The University Of Arkansas, Barrett Weidman

Chemical Engineering Undergraduate Honors Theses

This work was written to fulfill two main purposes. First, to help survivors of Drug-Facilitated Sexual Assault (DFSA) process their experience by compiling the toxicological, pharmacological, and distribution of the three most used date-rape drugs. Second, to gauge the knowledge and interest of University of Arkansas students regarding drug impairments, sexual assault education, and bystander intervention training. A survey was conducted for the latter and revealed that 91.6% of students believe the University’s existing sexual assault prevention education and bystander intervention training have room for improvement. Also, 37.1% of students who have received this education report that the programming does …

Extraction Of Melanin From Black Knot Fungus: Optimization And Applications, Amara Davis

Williams Honors College, Honors Research Projects

The goal of this research project was to optimize the extraction of melanin from black knot fungus and to analyze possible applications of the extracted melanin. An extraction method that was previously created was examined for possible improvements. Improvements that were studied include the elimination of steps in the extraction process while obtaining the same quality of product, examining options for machinery that could be used to increase production rate when moved to a production plant setting, and optimize the concentrations of the raw materials that are used in the extraction for possible reduction of cost without compromising yield or …

Development Of Light Actuated Chemical Delivery Platform On A 2-D Array Of Micropore Structure, Hojjat Rostami Azmand, Hojjat Rostami Azmand

Dissertations and Theses

Localized chemical delivery plays an essential role in the fundamental information transfers within biological systems. Thus, the ability to mimic the natural chemical signal modulation would provide significant contributions to understand the functional signaling pathway of biological cells and develop new prosthetic devices for neurological disorders. In this paper, we demonstrate a light-controlled hydrogel platform that can be used for localized chemical delivery in a high spatial resolution. By utilizing the photothermal behavior of graphene-hydrogel composites confined within micron-sized fluidic channels, patterned light illumination creates the parallel and independent actuation of chemical release in a group of fluidic ports. The …

Detection Of Nucleotides In Hydrated Ssdna Via 2-D H-Bn Nanopore With Ionic-Liquid/Salt-Water Interface, Jungsoo Lee

Multidisciplinary Studies Theses and Dissertations

Accomplishing slow translocation speed with high sensitivity has been the greatest mission for solid-state nanopore (SSN) to electrically detect nucleobases in single-stranded DNA (ssDNA). In this study, a method to detect nucleobases in ssDNA using a SSN is introduced by considerably slowing down the translocation speed and effectively increasing its sensitivity. The ultra-thin titanium dioxide (TiO₂) coated hexagonal boron nitride (h-BN) nanopore was fabricated, along with an ionic-liquid [bmim][PF₆]/2.0 M KCl aqueous (cis/trans) interfacial system, to increase both the spatial and the temporal resolutions. As the ssDNA molecules entered the nanopore, a …

The Use Of Nanoparticles And Electrospun Fibers For Intravaginal Delivery To Treat Viral And Bacterial Infections And Electrophysiological Measurements Of Synthetic Chloride Channels., Farnaz Minooei

Electronic Theses and Dissertations

Female reproductive viral and bacterial infections affect millions of women worldwide. Given the diversity and magnitude of these unmet reproductive health challenges, topical administration of antiretrovirals (ARVs) and antibiotics have emerged as promising approaches to maintain and restore reproductive health. However, currently available intravaginal dosage forms often suffer from low user adherence and the need for frequent, daily administration to achieve therapeutic effect. To address these challenges, the broad goal of this research was to focus on the development of new localized nanoparticle (NP) and electrospun fiber dosage forms to prolong the delivery and enhance the efficacy of active agents …

Incorporation Of Lignin In Natural And Synthetic Biomaterials To Alter Mechanical And Biochemical Properties For Enhanced Wound Healing, Jorge Alfonso Belgodere

LSU Doctoral Dissertations

It is estimated that chronic, non-healing wounds affect more than 6.5 million Americans annually, with an estimated healthcare cost beyond $14 billion. Here, we attempted to create composites of natural (collagen type I or gelatin-methacrylate) or synthetic (poly(ethylene glycol) polymers incorporating a natural plant component, lignin, to combat the costs and limitations current wound healing methods face. Three-dimensional matrices of collagen type I (Col I) are widely used in tissue engineering applications for its abundance in many tissues, bioactivity with many cell types, and excellent biocompatibility. Inspired by the structural role of lignin in plant tissue, we found that sodium …

A Microfluidic Paper-Based Analytical Device For Early Diagnosis And Prognosis Of Acute Myocardial Infarction, Lim Wei Yin

Student Works (2020-2029)

Acute myocardial infarction (AMI), also termed as heart attack, is often clinically screened by blood test through the measurement of cardiac biomarkers (i.e., troponin (T or I), creatine kinase (CK−MB) and myoglobin) and electrocardiography (ECG) changes which are presented to the hospital. However, the early diagnosis of AMI is challenging because the detection of biomarkers such as troponin (T or I) and CK−MB are only reliable at the intermediate and later stages (> 6 hours after chest pain onset), during myocardial injury and myocardial infarction. On the other hand, myoglobin often been used as early biomarker which is detectable within …

Bioengineering Extracellular Matrix Scaffolds For Volumetric Muscle Loss, Kevin Roberts

Graduate Theses and Dissertations

Volumetric muscle loss overwhelms skeletal muscle’s ordinarily capable regenerative machinery, resulting in fibrosis and severe functional deficits which have defied clinical repair strategies. My work spans the design and preclinical evaluation of implants intended to drive the cell community of injured muscle toward a regenerative state, as well as the development of an understanding of the molecular responses of this cell community to biomaterial interventions. I demonstrate a new class of biomaterial by leveraging the productive capacity of sacrificial hollow fiber membrane cell culture; I show specifically that unique threads of whole extracellular matrix can be isolated by solvent degradation …

The Endocytotic Fate Of A Mesoporous Silica Nanoparticle Supported Lipid Bylayer Crispr Delivery Vehicle, Angelea Maestas-Olguin

2019 Award Winners

No abstract provided.

Modification Of Lipid Microenvironments On Solid Support Structures For Use In Transmembrane Protein Assays, William J. Houlihan

Dissertations and Theses

Gamma-Secretase (γ-secretase) is a transmembrane protease of increasing interest, which has been shown to have significant connections to both cancer and Alzheimer’s disease. γ-secretase cleaves both Notch-1, a transmembrane signaling protein, and Amyloid precursor protein (APP), a transmembrane protein whose cleavage may result in the formation of β-amyloid plaques in the brain. Notch-1 and APP are widely studied proteins that have substantial impacts on the development and proliferation of cancer and Alzheimer’s disease, respectively. Notch-1 partakes in the signaling of apoptosis in damaged and mutated cells, thus its cleavage by γ-secretase within the plasma membrane has ramifications on cell growth …

Cell Surface Coatings For Mammalian Cell-Based Therapeutic Delivery, Pei-Jung Wu

Theses and Dissertations--Chemical and Materials Engineering

The cell plasma membrane is an interactive interface playing an important role in regulating cell-to-cell, cell-to-tissue contact, and cell-to-environment responses. This environment-responsive phospholipid layer consisting of multiple dynamically balanced macromolecules, such as membrane proteins, carbohydrate and lipids, is regarded as a promising platform for various surface engineering strategies. Through different chemical modification routes, we are able to incorporate various artificial materials into the cell surface for biomedical applications in small molecule and cellular therapeutics.

In this dissertation, we establish two different cell coating techniques for applications of cell-mediated drug delivery and the localization of cell-based therapies to specific tissues. The …

Distribution And Localization Of Novel Iodine Nanoparticles In The Human Glioma 1242 Growing In The Brains Of Mice, Benjamin Billings

Honors Scholar Theses

Observing and designing the in vivo distribution and localization of therapeutic nanoparticles is an essential aspect of developing and understanding novel nanoparticle- based medical treatments. This study investigates novel PEGylated Iodine-based nanoparticles (INPs), an alternate composition to the more widely researched gold nanoparticles (AuNPs), which may help avoid adverse effects associated with AuNPs, such as potential toxicity and skin discoloration, when used in similar applications. Determining the localization of the novel INPs within murine brains containing human glioma U-1242MG cells is critical in assisting the development of radiation dose enhancement therapy for this aggressive cancer. Radiation dose enhancement utilizes the …

Development Of Entubulation Strategies For Treating Central Nervous System Injuries, Ivy Brosch

Williams Honors College, Honors Research Projects

According to the McKnight Brain Institute, at least 10,000 people annually in the USA suffer from a central nervous system (CNS) injury. These injuries can cause serve disabilities including paralysis. Due to the complexity of the spinal cord, it is common that potential CNS treatments are first applied to an optic nerve crush (ONC) model in rats. Two proposed treatments were employed; one where nerve growth factor (NGF) was immobilized to a chitosan substrate to stimulate axonal regeneration, and the other using pentadecafluorooctanoyl chloride modified methacrylamide chitosan (MAC(Ali15)F) hydrogel to enhance local oxygenation. The two different treatments were formed into …

Molded Features In Pdms For Fabricating Bacterial Cellulose For Various Geometries, Mitchell Habegger

Williams Honors College, Honors Research Projects

The purpose of producing features on bacterial cellulose (BC) is to facilitate the elongation and alignment for cells, in this case Normal Human Dermal Fibroblast (NHDF) cells. The elongated cells have applications in wound healing, tissue engineering, disease diagnostics, and many other fields. Experiments were run to test the effectiveness of transferring features to BC sheets from features induced by fracturing on polydimethylsiloxane (PDMS) and those duplicated from molds with existing features. The features were duplicated to BC sheets by either air drying or Guided Assembly-Based Biolithography (GAB). The research results showed that fracture inducing on PDMS produced very small …

Molecular Modeling Of Antibody-Antigen Binding Near Solid Surfaces, Derek Bush, Thomas Knotts

Biomedical Engineering Western Regional Conference

Antibody microarrays are biosensors that have the potential to revolutionize molecular detection in medicine, scientific research, and national defense. However, current microarrays are not widely used due to problems including poor reproducibility and signal quality, unbalanced antibody performance, and cross-reactivity. Prior work in the area focused mainly on the stability of the antibody alone and not its affinity for its antigen. This presentation shows results of using molecular simulation to determine how different types of surfaces affect antigen binding to surface-tethered antibodies. The results offer an unprecedented, molecular-level view into these protein-protein-surface interactions and how to drive binding to occur.

Sugar Versus Lipid For Sustainable Biofuels, Yaşar Demirel

Yaşar Demirel Publications

Introduction

First‐generation biofuels, namely, ethanol and biodiesel, have led to far reaching impact on the peoples’ life world‐wide.[1] However, they inter-fere with the food supply chain and may not be sustainable although some of the biomass are converted to biofuels after those biomasses have met the human needs. Still, the first‐generation–based biofuels have proved that sugar and lipid platforms can be an answer to energy security and global warming concerns without the need for new infrastructure for feedstock delivery as well as for biomass‐to‐biofuel conversion tech-nologies. At the same time, we are discovering and assessing the long‐term environmental im-plications on …

Fabrication Of Flexible, Biofunctional Architectures From Silk Proteins, Ramendra K. Pal

Theses and Dissertations

Advances in the biomedical field require functional materials and processes that can lead to devices that are biocompatible, and biodegradable while maintaining high performance and mechanical conformability. In this context, a current shift in focus is towards natural polymers as not only the structural but also functional components of such devices. This poses material-specific functionalization and fabrication related questions in the design and fabrication of such systems. Silk protein biopolymers from the silkworm show tremendous promise in this regard due to intrinsic properties: mechanical performance, optical transparency, biocompatibility, biodegradability, processability, and the ability to entrap and stabilize biomolecules. The unique …

Characterization Of Molecular Communication Based On Cell Metabolism Through Mutual Information And Flux Balance Analysis, Zahmeeth Sayed Sakkaff

School of Computing: Dissertations, Theses, and Student Research

Synthetic biology is providing novel tools to engineer cells and access the basis of their molecular information processing, including their communication channels based on chemical reactions and molecule exchange. Molecular communication is a discipline in communication engineering that studies these types of communications and ways to exploit them for novel purposes, such as the development of ubiquitous and heterogeneous communication networks to interconnect biological cells with nano and biotechnology-enabled devices, i.e., the Internet of Bio-Nano Things. One major problem in realizing these goals stands in the development of reliable techniques to control the engineered cells and their behavior from the …