Biological Engineering Commons^™

Composite Filler Characterization By Scanning Electron Microscopy, Image Analysis And Thermogravimetry, J. Vaidyanathan, T. K. Vaidyanathan

Cells and Materials

The morphological and compositional characterization of the filler particles in selected dental composites has been accomplished by a combination of backscattered electron imaging, digital imaging , energy dispersive X-ray analysis and thermogravimetry. Backscattered electron images provide excellent composition contrast between the filler and the matrix in this analysis . Qualitative energy dispersive spectroscopy was used to classify the filler composition in the composites studied. The digital imaging technique of feature analysis was utilized to quantitatively characterize the particle morphological parameters and their distributions. Several parameters were determined of which the particle area, breadth, height and Waddel diameter are emphasized. Particle …

Adhesion Of Staphylococci To Breast Prosthesis Biomaterials: An Electron Microscopic Evaluation, T. A. Fassel, J. E. Van Over, C. C. Hauser, C. E. Edmiston, J. R. Sanger

Cells and Materials

Gram-positive coagulase-negative staphylococci have been implicated in breast prosthesis infection. Staphylococcus au re us, Staphylococcus epidermidis, and Staphylococcus hominis strains were examined for adhesion and proliferation morphology to polyurethane foam and smooth silicone rubber prosthetic biomaterials. Ruthenium red, alcian blue and ruthenium red-lysine in en bloc procedures were applied to optimally visualize the polysaccharide slime. Ruthenium red processing resulted in observation of additional outer material close to the cell wall, more than seen in the absence of cationic reagent. Alcian blue preserved fibrous or netlike strands or meshworks of material. Ruthenium red-lysine preserved considerable amounts of slime covering the cocci …

A Comparative Study Of Bovine Pericardium Mineralization: A Basic And Practical Approach, Branko B. Tomazic, Chakwan Siew, Walter E. Brown

Cells and Materials

The biomineralization of bovine pericardium (BP) heart valve bioprostheses was investigated by simulation of the process under in vitro and in vivo conditions. The nature and composition of calcific deposits that formed in human heart valve bioprostheses were compared with the mineral formed on BP discs immersed in a calcifying medium or subcutaneously implanted into Sprague-Dawley rats. The early stage of experimental biomineralization in vitro took place on the surface only, while in vivo deposition appeared to be intrinsic, as documented by histological cross sections. The chemical composition of the initial mineral phase formed under in vitro conditions had a …

The Articular Cartilage Of The Rabbit Knee: A Scanning Electron Microscopy Study, Daniel Levanon, Haim Stein

Cells and Materials

The surface morphology of eight sectors in the rabbit knee articular cartilage was studied using scanning electron microscopy. Cartilage surfaces showed wide variation in the shape, dimensions , and density of gaps and acellular processes. Patellas and load-bearing condyles revealed a relatively higher density of processes than did load-free condyles. Surface processes and gaps were abundant. They might represent a condensation product(s) of hyaluronic acid/protein complex that accrues during cycles of loading/weight bearing.

Preservation Of The Cell-Biomaterial Interface At The Ultrastructural Level, J. M. Schakenraad, J. A. Oosterbaan, E. H. Blaauw

Cells and Materials

Studying the tissue-biomaterial interface at the ultrastructural level is not without problems. Dissolution of the biomaterial in one of the dehydration or embedding media causes holes and shatter during sectioning or dislodgement of the biomaterial. The fine tuning of the hardness of both biomaterial and embedding medium, as well as the introduction of butyl-2,3- epoxypropylether as an intermediate between the dehydration series and the Epon resin , improving the impregnation , will solve many of the problems mentioned. With this improved technique good results were obtained with materials ranging from teflon, poly(Lactic acid) and polyurethanes to tissue culture polystyrene. No …

Adhesion And Spreading Of Human Fibroblasts On Superhydrophobic Fep-Teflon, H. J. Busscher, I. Stokroos, J. G. Golverdingen, J. M. Shakenraad

Cells and Materials

Adhesion and spreading of human fibroblasts was studied on hydrophobized and hydrophilized FEPTeflon, and compared with adhesion and spreading on untreated FEP-Teflon and Tissue culture polystyrene (TCPS). Superhydrophobic FEP-Teflon was prepared by ion etching followed by oxygen glow-discharge. Hydrophilic PEP-Teflon was prepared by ion etching only. Water contact angles of the modified surfaces were 140- 1500 and 5-10° for the hydrophobic and the hydrophilic variant, respectively. (Untreated FEP-Teflon: 109°). Spreading of human skin fibroblasts significantly increased on hydrophilic FEP-Teflon (257 μm2 per cell), whereas a significant decrease was observed on superhydrophobic FEP-Teflon (158 μm2 per cell), as compared to untreated …

Surface Modification Of Polymers To Permit Endothelial Cell Growth, C. James Kirkpatrick, Detlef Mueller-Schulte, Marc Roye, Guenter Hollweg, Claudia Gossen, Horst Richter, Christian Mittermayer

Cells and Materials

The interaction between endothelial cells (EC) and polymers has become relevant to medicine as a result of attempts to improve the biocompatibility of vascular prostheses. In man, endothelialization is minimal, so that vascular surgeons have attempted to pre-seed vascular grafts with autologous EC. The poor results of EC seeding of commonly used materials for vascular grafts, such as expanded polytetrafluoroethylene (ePTFE) or woven polyester (Dacron) has led to attempts to modify the surface of these and other polymers. Three principal modification techniques have been employed : 1. adsorption of bioactive molecules from applied solutions. Examples are fibronectin, collagen types I …

Dusts Produced During Cutting Of Modern Splinting Bandages, R. Wytch, D. W. Gregory, R. Clayton, D. Wardlaw

Cells and Materials

Previous work carried out by the authors (Wytch et al ., 1988a) has shown that airborne dust generated during removal of orthopaedic casts with a power saw could represent a respiratory hazard. Further work has been carried out on all types of splinting bandage currently available in the United Kingdom to assess the potential dust hazard when sawing these materials. It has been shown that although plaster of Paris bandage produces significant concentrations of airborne dust, most of the polyurethane-impregnated fabric bandages generate extremely low levels of dust and in the case of the non-glass fabrics, the level is insignificant. …

A Simple Method For Ultrastructural Evaluation Of Fragile Collagenous Biomaterials, Arthur J. Wasserman, Yasushi P. Kato, Frederick H. Silver

Cells and Materials

No abstract provided.

Peripheral Nerve Regeneration Within Tubular Prosthesis: Effects Of Laminin And Collagen Matrices On Cellular Ingrowth, Ivar J. Kljavin, Roger D. Madison

Cells and Materials

Bridging a severed peripheral nerve with a tubular conduit, "entubulation repair" , allows manipulation of the microenvironment encountered by regenerating axons. In the present study, we placed the ends of severed mouse sciatic nerves into nonpermeable Tygon tubes to bridge a 4 mm nerve gap. The tube lumen was filled with either a collagen or laminin matrix. The matrices formed a stable 3-D structure connecting both proximal and distal stumps, and provided a scaffolding for the regenerating axons and their supporting cells. We examined with scanning electron microscopy (SEM), transmission electron microscopy (TEM) and light microscopy, the initial events of …

Ultrastructural Study Of Bone Formation On Synthetic Hydroxyapatite In Osteoblast Cultures, J. M. Sautier, J. R. Nefussi, N. Forest

Cells and Materials

Collagenase isolated rat calvaria cells forming a mineralized matrix in vitro were cultured in the presence of synthetic hydroxyapatite. Interactions between bone cells and hydroxyapatite biomaterial were followed by transmission electron microscopy. The appearance of a granular, collagen free, electron-dense layer at the periphery of the material was noted initially. Progressively, an amorphous, granular material formed and extended between the hydroxyapatite aggregates. Osteoblastic cells then synthesized an osteoid matrix which mineralized on the first formed granular collagen free layer, following a classical pattern of calcification . Demineralization of ultrathin sections confirmed the presence of this interface between the material and …

Interactions Of Bacteria And Amoebae With Ocular Biomaterials, Thomas John

Cells and Materials

The use of biomaterials in periocular and intraocular sites has resulted in some ocular inflammations and infections which can result in vision-threatening ocular disease. This review addresses bacterial interactions with, and adherence to ocular biomaterials such as soft contact lenses, surgical suture materials, and intraocular lenses. In addition, adherence of Acanthamoeba to soft contact lenses is described, and the role of these lenses in the development of Acanthamoeba keratitis is discussed.

Evaluation Of The Images Of Specular Microscopy Of The Cells On Implanted Intraocular Lenses In Vivo, Kiyoshi Okada, Keiko Takahashi, Hiroaki Sagawa, Kuniomi Abe

Cells and Materials

Specular microscopy , an optical method to study the anterior segment of the eye, was applied to observe the cells on implanted intraocular lenses in vivo. The images from specular microscopy were evaluated by comparing the morphology of the same cells on intraocular lenses implanted in rabbit eyes by specular microscopy , light microscopy and scanning electron microscopy (SEM). The time lapse study in living human eyes and the optical evaluation of jts interference images were performed to elucidate its image formation.

The same giant cells, as observed in vivo by specular microscopy, proved to be multinucleated cells. It …

Stereoscopic Analysis Of Trabecular Bone Orientation In Proximal Human Tibias, K. N. Bachus, M. K. Harman, R. D. Bloebaum

Cells and Materials

The three-dimensional orientation of trabeculae is a key factor in determining the load carrying capabilities of cancellous bone. Previous biomechanical studies have shown that proximal tibias resected parallel to the articulating surface are stronger and stiffer than the contralateral tibias resected perpendicular to the long axis of the bone. However, morphologic evidence was not provided to help explain the mechanical differences.

To determine the orientation of the trabeculae in the medial condyle for both parallel cut and perpendicular cut specimens, a scanning electron microscope and stereoscopic techniques were used. Data showed that tibias cut parallel to the articular surface had …