Biomedical Engineering and Bioengineering Commons^™

Igf-I Releasing Plga Scaffolds For Growth Plate Regeneration, Sharath Kumar Chinnakavanam Sundararaj

University of Kentucky Master's Theses

Growth plate is a highly organized cartilaginous tissue found at the end of long bones and is responsible for longitudinal growth of the bones. Growth plate fracture leads to retarded growth and unequal limb length, which might have a lifelong effect on a person’s physical stature. This research is a tissue engineering approach for the treatment of growth plate injury. Insulin-like growth factor I (IGF-I), which can stimulate cartilage formation, was encapsulated within PLGA microspheres that were then used to form porous scaffolds. The release profile of the IGF-I from the PLGA scaffold showed a biphasic release pattern. In vitro …

Preparation And Characterization Of Electrospun Poly(D, L-Lactide-Co-Glycolide) Scaffolds For Vascular Tissue Engineering And The Advancement Of An In Vitro Blood Vessel Mimic, Tiffany Richelle Pena

Master's Theses

PREPARATION AND CHARACTERIZATION OF ELECTROSPUN POLY(D,L-LACTIDE-CO-GLYCOLIDE) SCAFFFOLDS FOR VASCULAR TISSUE ENGINEERING AND THE ADVANCEMENT OF AN IN VITRO BLOOD VESSEL MIMIC

Tiffany Richelle Peña

Currently, an estimated 1 in every 3 adult Americans are affected by one or more cardiovascular complications. The most common complication is coronary artery disease, specifically atherosclerosis. Outcomes of balloon angioplasty treatments have been significantly improved with the addition of drug eluting stents to the process. Although both bare metal and drug eluting stents have greatly increased the effectiveness of angioplasty and decreased the occurrence of restenosis, several complications still exist. For this reason, the stent …

A Pulsatile Bioreactor For Conditioning Tissue Engineered Heart Valves, Leslie Sierad

All Theses

Tissue engineered constructs with autologous adult stem cells capable of self-repair and growth are highly desired replacements for diseased heart valves. However, the current approaches have inadequate mechanical properties to withstand in vivo implantation. Therefore, our group hypothesized that an in vitro environment of physiological intra-cardiac pressures and flow will stimulate stem cells to differentiate and remodel valvular scaffold constructs before implantation.
The group developed a pneumatic-driven conditioning system (Aim I) consisting of a three-chambered heart valve bioreactor, a pressurized compliance tank, a reservoir tank, one-way valves, pressure-retaining valves, and pressure transducers. The system can be sterilized using conventional autoclaving …

Applied Electrokinetics For Tissue Engineering Applications, Stephanie R. Tully-Dartez

Doctoral Dissertations

Tissue engineering could provide an alternative source of transplant tissue regardless of donor supply and with reduced risk of immune rejection. Engineered tissue requires three critical components for successful development: the cells, growth factors, and the scaffold on which they will initially grow. The scaffold acts as a temporary extracellular matrix (ECM) allowing cell attachment and acclimation to the environment prior to synthesis and construction of the cell's native ECM. Prior to cell seeding, the scaffold must be characterized to determine whether or not the pore geometry is conducive to cell implantation. Electrochemical impedance spectroscopy (EIS) provides a unique and …

Imaging Of Tyramine-Substituted Hydrogels For Tissue Replacement, Ediuska V. Laurens

ETD Archive

Novel tyramine-based hyaluronan (HA) and collagen hydrogels have been developed in which cross-linking is accomplished via peroxidase-mediated dityramine linkages allowing direct cross-linking in vivo. These TB hydrogels possess advantageous physical properties, which include excellent biocompatibility and the ability to mimic the biological, structural and mechanical properties of normal, healthy tissues, including cartilage, and thus provide for synthetic, implantable biomaterials suitable for a wide range of tissue types. The efficacy of these TB-hydrogels has been previously tested in a number of clinically relevant animal models, which have evaluated their applicability for the repair/replacement of various tissues, including cartilage. Nevertheless, there exists …

Cortical Bone Tissue Engineering;Scaffold Design And Cell Selection, Demin Wen

ETD Archive

Cortical bone tissue engineering provides a promising approach to generate graft materials needed to treat the large sized bone defects. The underling premise of tissue engineering is to mimic the in vivo microenvironment as best as possible in vitro culture system. To select an appropriate scaffold material used in this model system, mechanical and hydraulic permeability properties of 316L porous stainless steel and polymethylmethacrylate (PMMA) were studied, as well as their biocompatibility in short and long term cell culture. Results showed that scaffolds made of both stainless steel and PMMA: (1) could be manufactured to have similar permeability as that …

Design And Optimization Of A Blood Vessel Mimic Bioreactor System For The Evaluation Of Intravascular Devices In Simple And Complex Vessel Geometries, Sara M. Leifer

Master's Theses

Coronary artery disease affects millions of people and the ability to detect and treat the disease is advancing at a rapid rate. As a result, the development of intravascular technologies is the focus of many medical device manufacturers. Specifically, coronary stent implantation is being performed in an increasing number of patients and a number of new stent designs have been introduced to the market, resulting in the need for improved preclinical testing methods. An in vitro tissue engineered “blood vessel mimic” (BVM) system has previously been established and its feasibility for the initial testing of newly emerging intravascular technology has …

Development Of A Cell Depositing System Using Inkjet Technology, Jason Robert Ozaeta

Master's Theses

In the past decade, advances in tissue engineering have allowed researchers to fabricate simple tissues. However, the process of creating these native tissues is a time consuming and inefficient process. A scaffold must first be fabricated then exposed to a sea of cells in the hopes of seeding. Furthermore, even though cells may have attached, more time must be spent in order to allow the cells to migrate to their ideal locations. To deal with this problem, researchers have investigated whether rapid prototyping principals could be adapted to facilitate the cell seeding process by placing cells in their respective locations …

Design Of An Electrospun Type Ii Collagen Scaffold For Articular Cartilage Tissue Engineering, Catherine Pemble Barnes

Theses and Dissertations

Traumatic defects in articular cartilage can lead to joint disease and disability including osteoarthritis. Because cartilage is unable to regenerate when injured, the field of tissue engineering holds promise in restoring functional tissue. In this research, type II collagen was electrospun, cross-linked, and tested as scaffolds for supporting chondrocyte growth. The mechanical, biochemical, and histological characteristics of the engineered tissue were assessed as a function of the electrospinning solution concentration (i.e. scaffold fiber diameter and pore properties) and as a function of the time in culture (evaluated at 2, 4, and 6 weeks). Fiber diameter had a linear relationship with …

Development Of A Cellular Fiber Spinning Technology For Regenerative Medicine, Willie Jones

All Theses

In order to prove that our textile hollow fiber spinning apparatus was adequate for cellular encapsulation, we confirmed the viability and metabolic activity of green fluorescent protein (GFP) labeled bovine mammary epithelial cells (MAC-Ts) that were encapsulated in either the wall or lumen of alginate fibers. After a 21 day in vitro macroscopic evaluation, no decrease in fluorescence was observed; and it was determined that MAC-Ts encapsulated under both methods produced lactic acid and consumed glucose. Histomorphological analyses revealed that the diameter of the MAC-Ts increased under both encapsulation scenarios, with little to no evidence of cell cluster propagation. Based …

Determination Of The Mechanical Properties Of Electrospun Gelatin Based On Polymer Concentration And Fiber Alignment, Leander Taylor Iii

Theses and Dissertations

The process of electrospinning has given the field of tissue engineering insight into many aspects of tissue engineered scaffolds, including how factors such as fiber diameter and porosity are affected by polymer concentration. However, the affects of fiber alignment upon the material properties of electrospun scaffolds remains unclear. The purpose of this study is to determine how the material properties of electrospun gelatin scaffolds are affected by changes in fiber alignment and starting gelatin concentration. Gelatin scaffolds, with starting concentrations of 80, 100, and 130mg/m1, were electrospun onto a target mandrel rotating at various speeds. Samples of each scaffold were …

Scaffold Permeability As A Means To Determine Fiber Diameter And Pore Size Of Electrospun Fibrinogen, Scott Allen Sell

Theses and Dissertations

The purpose of this study was to construct a flowmeter that could accurately measure the hydraulic permeability of electrospun fibrinogen scaffolds, providing insight into the transport properties of electrospun scaffolds while making the measurement of their topographical features (fiber and pore size) more accurate. Three different concentrations of fibrinogen were used (100, 120, and 150mg/ml) to create scaffolds with three different fiber diameters and pore sizes. The fiber diameters and pore sizes of the electrospun scaffolds were analyzed through scanning electron microscopy and image analysis software. The permeability of each scaffold was measured and used to calculate permeability-based fiber diameters …

Fabrication Of Nanofiber Scaffolds By Electrospinning And It's Potential For Tissue Engineering, Shobana Shanmugasundaram

Theses

Electrospinning is a fabrication process that uses an electric field to control the deposition of polymer fibers on to a target substrate. This electrospinning strategy can be used to fabricate fibrous polymer mats composed of fiber diameters ranging from several microns down to tens of nanometers. This study assesses the potential of electrospinning, as an alternative scaffold fabrication technique for tissue engineering applications. In this study, electrospinning is adapted to produce tissue-engineering scaffolds of two different size ranges composed of non-woven poly-L-lactide (PLLA) nanofibers and as a first study, the potential use of these scaffolds as tissue engineering scaffolds was …

Controlled Release Systems For Dna Delivery, Angela K. Pannier, Lonnie D Shea

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Adapting controlled release technologies to the delivery of DNA has the potential to overcome extracellular barriers that limit gene therapy. Controlled release systems can enhance gene delivery and increase the extent and duration of transgene expression relative to more traditional delivery methods (e.g., injection). These systems typically deliver vectors locally, which can avoid distribution to distant tissues, decrease toxicity to nontarget cells, and reduce the immune response to the vector. Delivery vehicles for controlled release are fabricated from natural and synthetic polymers, which function either by releasing the vector into the local tissue environment or by maintaining the vector at …

Tissue Engineering: At The Interface Between Engineering, Biology And Medicine, Brenda Ogle, Priti Gairola, Jodi Balik, Daniel L. Mooradian

Journal of the Minnesota Academy of Science

No abstract provided.

In Vitro Characterization Of Transforming Growth Factor-Ss1-Loaded Composites Of Biodegradable Polymer And Mesenchymal Cells, S. B. Nicoll, A. E. Denker, R. S. Tuan

Cells and Materials

A porous, biodegradable polymer composite was fabricated from poly(L-lactic acid) (PLLA) using a solvent- casting particulate-leaching technique, and loaded with recombinant human transforming growth factor ß-1 (TGF-ß1). Tissue culture polystyrene (TCPS) and PLLA disks loaded with bovine serum albumin (BSA) served as controls. Polymer specimens were seeded at high cell density with C3H10T1/2 cells, a mouse embryonic cell line capable of differentiating into various connective tissue cell types. The polymer matrices degraded slowly in physiological saline over four weeks, with a sustained yet sporadic release of active TGF-ß1; a more controlled release of TGF-ß1 was observed in serum-containing culture medium …