Biomedical Engineering and Bioengineering Commons^™

Determining The Effect Of Locally Delivered Bioactive Modulators On Macrophage Activation At The Implantation Site Of Different Biomaterials In Rats, Kamel Alkhatib

Graduate Theses and Dissertations

Altering the foreign body reaction by targeting macrophages has been of interest in the biomaterials field to improve the integration of longevity of implanted biomedical devices. The objective of this dissertation was to study the effect of locally delivered bioactive modulators on macrophage activation at the implantation site of different biomaterials in rats. Iloprost, a prostacyclin analog, was tested for its ability to direct macrophages to their pro-wound healing phenotype after the implantation of microdialysis probe in the subcutaneous space of male Sprague Dawley rats. This study showed that iloprost can shift macrophage activation states in vivo to the pro-wound …

Development And Characterization Of Aqueous-Based Recombinant Spider Silk Protein Biomaterials With Investigations Into Potential Applications, Thomas I. Harris

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Spider silks are incredible natural materials that possess desirable combinations of strength, elasticity, weight, and robustness. Other properties such as biocompatibility and biodegradability further increase the worth of these materials. The possibility of farming spiders is impractical due to spiders’ natural behaviors. Modern biotechnologies have allowed for recombinant spider silk proteins (rSSps) to be produced without the use of spiders. However, the features responsible for spider silks impressive properties can cause difficulties with producing silk materials. A recently developed water-based and biomimetic solvation method has provided a solution to such difficulties and has also led to novel silk biomaterials. Most …

Decellularized Matrices Effect On The Adaptive Immune Response, Kegan Sowers

Theses and Dissertations

Decellularized extracellular matrices have been a growing area of interest in the biomedical engineering fields of tissue engineering and regenerative medicine.As these materials move toward clinical applications, the immune response to these materials will be a driving force toward their success in clinical approaches. Fully digested decellularized matrix constructs derived from porcine liver, muscle and lung were created to test the adaptive immune response. Hydrogel characterization ensured that the materials had relatively similar stiffness levels to reduce variability, and in vitro studies were conducted. Each individual construct as well as a gelatin control were plated with a co-culture of macrophages …

Engineering Surface Properties To Modulate Inflammation And Stem Cell Recruitment Through Macrophage Activation, Kelly M. Hotchkiss

Theses and Dissertations

Biomaterials are becoming the most commonly used therapeutic method for treatment of lost or damaged tissue in the body. Metallic materials are chosen for high strength orthopaedic and dental applications. Titanium (Ti) implants are highly successful in young, healthy patients with the ability to fully integrate to surrounding tissue. However the main population requiring these corrective treatments will not be healthy or young, therefore further research into material modifications have been started to improve outcomes in compromised patients. The body’s immune system will generate a response to any implanted material, and control the final outcome. Among the first and most …

Removal Of Retained Electrospinning Solvent Prolongs Drug Release From Electrospun Plla Fibers, Anthony R. D'Amato, Nicholas J. Schaub, Jesus M. Cardenas, Andrew S. Fiumara, Paul M. Troiano, Andrea Fischetti, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

A major challenge in developing drug-releasing electro spun nanofibers is obtaining long-term drug release over many weeks with no burst release of drug. Here, we present new methods capable of prolonging the diffusive release of small molecule drugs from electro spun poly-L-lactic acid (PLLA) nanofibers. The methods focus on removal of retained electrospinning solvent through fiber heating, maintaining fibers in a laboratory setting, or a combination of these methods. These post-fabrication methods altered the release characteristics of a model small molecule drug, 6-aminonicotinamide (6AN), from PLLA fibers. Specifically, untreated fibers released 6AN over 9 days, and fibers that underwent a …

Biomaterials For Local, Controlled Drug Delivery To The Injured Spinal Cord, Alexis M. Ziemba, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Affecting approximately 17,000 new people each year, spinal cord injury (SCI) is a devastating injury that leads to permanent paraplegia or tetraplegia. Current pharmacological approaches are limited in their ability to ameliorate this injury pathophysiology, as many are not delivered locally, for a sustained duration, or at the correct injury time point. With this review, we aim to communicate the importance of combinatorial biomaterial and pharmacological approaches that target certain aspects of the dynamically changing pathophysiology of SCI. After reviewing the pathophysiology timeline, we present experimental biomaterial approaches to provide local sustained doses of drug. In this review, we present …

Mannequin Challenge | Biological Engineering, Usu College Of Engineering

College of Engineering News

Who says that learning about the various properties of Biomaterials is boring? Clearly, they haven't taken Dr. Yu Huang's BENG 2330 Properties of Biomaterials course. Not only do these students know how to distinguish the differences between natural and synthetic biomaterials.They know how to have a good time bringing the mannequin challenge into their lab clean up.

Recent Approaches In Designing Bioadhesive Materials Inspired By Mussel Adhesive Protein, Pegah Kord Forooshani, Bruce P. Lee

Department of Biomedical Engineering Publications

Marine mussels secret protein-based adhesives, which enable them to anchor to various surfaces in a saline, intertidal zone. Mussel foot proteins (Mfps) contain a large abundance of a unique, catecholic amino acid, Dopa, in their protein sequences. Catechol offers robust and durable adhe-sion to various substrate surfaces and contributes to the curing of the adhesive plaques. In this article, we review the unique features and the key functionalities of Mfps, catechol chemistry, and strategies for preparing catechol-functionalized poly- mers. Specifically, we reviewed recent findings on the contributions of various features of Mfps on interfacial binding, which include coacervate formation, surface …

Alginate Hydrogels As Three-Dimensional Scaffolds For In Vitro Culture Models Of Growth Plate Cartilage Development And Porcine Embryo Elongation, Taylor D. Laughlin

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

The establishment of in vitro culture models utilizes tissue engineering principles to design functional mimics of in vivo environments in vitro. Advantages for the use of in vitro culture models include ethical alleviation of animal models for therapeutic testing, cost efficiency, and a greater ability to study specific mechanisms via a systematic, ground-up approach to development. In this thesis, alginate hydrogels are utilized in the development of in vitro culture models of porcine embryo elongation and growth plate cartilage development. First, the effect of scaffold and modifications to the scaffold were explored in both projects. In order to modulate …

Enabling Studies To Optimize Biomaterials For The Treatment Of Myocardial Infarction, Eva Adriana Romito

Theses and Dissertations

The canonical mechanism of wound healing is disrupted following a myocardial infarction (MI), manifesting as an unregulated response that negatively impacts left ventricular (LV) function. This mechanism, termed post-MI remodeling, culminates in an outcome that favors progression to a systolic heart failure state and death for the patient. Therapeutic approaches following the occurrence of a MI are designed to modulate the natural remodeling process and mitigate the loss of cardiac function. The mechanics and structure of the healing infarct have been the focus of numerous pre-clinical and clinical investigations, leading to the impending clinical introduction of material injections as a …

Calcium Phosphate As A Key Material For Socially Responsible Tissue Engineering, Vuk Uskoković, Victoria M. Wu

Pharmacy Faculty Articles and Research

Socially responsible technologies are designed while taking into consideration the socioeconomic, geopolitical and environmental limitations of regions in which they will be implemented. In the medical context, this involves making therapeutic platforms more accessible and affordable to patients in poor regions of the world wherein a given disease is endemic. This often necessitates going against the reigning trend of making therapeutic nanoparticles ever more structurally complex and expensive. However, studies aimed at simplifying materials and formulations while maintaining the functionality and therapeutic response of their more complex counterparts seldom provoke a significant interest in the scientific community. In this review …

Elastin Like Polypeptides As Drug Delivery Vehicles In Regenerative Medicine Applications, Alex Leonard

USF Tampa Graduate Theses and Dissertations

Elastin like polypeptides (ELPs) are a class of naturally derived biomaterials that are non-immunogenic, genetically encodable, and biocompatible making them ideal for a variety of biomedical applications, ranging from drug delivery to tissue engineering. Also, ELPs undergo temperature-mediated inverse phase transitioning, which allows them to be purified in a relatively simple manner from bacterial expression hosts. Being able to genetically encode ELPs allows for the incorporation of bioactive peptides and functionalization of ELPs. This work utilizes ELPs for regenerative medicine and drug delivery.

The goal of the first study was to synthesize a biologically active epidermal growth factor-ELP (EGF-ELP) fusion …

Bioactive Poly(Beta-Amino Ester) Biomaterials For Treatment Of Infection And Oxidative Stress, Andrew L. Lakes

Theses and Dissertations--Chemical and Materials Engineering

Polymers have deep roots as drug delivery tools, and are widely used in clinical to private settings. Currently, however, numerous traditional therapies exist which may be improved through use of polymeric biomaterials. Through our work with infectious and oxidative stress disease prevention and treatment, we aimed to develop application driven, enhanced therapies utilizing new classes of polymers synthesized in-house. Applying biodegradable poly(β-amino ester) (PBAE) polymers, covalent-addition of bioactive substrates to these PBAEs avoided certain pitfalls of free-loaded and non-degradable drug delivery systems. Further, through variation of polymer ingredients and conditions, we were able to tune degradation rates, release profiles, cellular …

Harnessing Notch Signaling For Biomaterial Scaffold-Based Bone Regeneration, Helena P. Lysandrou, Chunhui Jiang, Naagarajan Narayanan, Shihuan Kuang, Meng Deng

The Summer Undergraduate Research Fellowship (SURF) Symposium

Bone fracture has recently become prevalent, especially with an increasingly aging population. Current bone grafts procedures, including autografts and allografts, are hindered by multiple factors, such as limited supplies and inconsistent bone healing. Scaffold-based bone tissue engineering emerges as a prospective strategy to aid in bone regeneration through delivery of growth factors such as bone morphogenic proteins (BMPs). However, the use of BMPs suffers from several drawbacks such as protein instability and immunogenicity. Therefore, there exists a great need for the development of novel therapies to promote bone healing. Notch signaling, a pathway critical for cell-fate determination has been shown …

Nano Scale Mechanical Analysis Of Biomaterials Using Atomic Force Microscopy, Diganta Dutta

Mechanical & Aerospace Engineering Theses & Dissertations

The atomic force microscope (AFM) is a probe-based microscope that uses nanoscale and structural imaging where high resolution is desired. AFM has also been used in mechanical, electrical, and thermal engineering applications. This unique technique provides vital local material properties like the modulus of elasticity, hardness, surface potential, Hamaker constant, and the surface charge density from force versus displacement curve. Therefore, AFM was used to measure both the diameter and mechanical properties of the collagen nanostraws in human costal cartilage. Human costal cartilage forms a bridge between the sternum and bony ribs. The chest wall of some humans is deformed …

Analysis Of Neurite Outgrowth On Electrospun Fiber Scaffolds In The Presence Of Blebbistatin And Paclitaxel, A. R. D'Amato, N. J. Schaub, C. D.L. Johnson, J. Cardenas, R. J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

In an attempt to increase the rate of neurite extension from E9 chick embryo dorsal root ganglion (DRG) on electro spun fiber scaffolds we experimented with two drugs that have been used previously to affect neuronal growth. Blebbistatin and paclitaxel were added to DRG cultured on electro spun fibers in an attempt to increase the rate of neurite extension along fibrous scaffolds. Blebbistatin increased the length of neurites extending from the DRG explant in comparison to the drug-free control group. In contrast, paclitaxel completely eliminated all neurite extension from the DRG explant when compared to the control. A third treatment …

Finite Element Analysis Of The Application Of Ultrasound-Generated Acoustic Radiation Force To Biomaterials, Nicole J. Piscopo

Honors Scholar Theses

While most bone fractures can heal simply by being stabilized, others can take a longer time to rejoin or they could fail to merge back together completely. Numerous studies have shown the positive effects that ultrasonic therapy have had on delayed-union and non-union bone fracture repair but little is known as to what specific biological mechanisms are at play. Ultrasound may be a valuable tool for bone tissue regeneration at these fracture sites using a tissue engineering approach, however, more must be understood about its impact on stimulating tissues to heal before this can be a reality. For that reason, …

Surface Modification Of Biodegradable Porous Mg Bone Scaffold Using Polycaprolactone/Bioactive Glass Composite, Mostafa Yazdimamaghani, Mehdi Razavi, Daryoosh Vashaee, Lobat Tayebi

Chemical and Biochemical Engineering Faculty Research & Creative Works

A reduction in the degradation rate of magnesium (Mg) and its alloys is in high demand to enable these materials to be used in orthopedic applications. For this purpose, in this paper, a biocompatible polymeric layer reinforced with a bioactive ceramic made of polycaprolactone (PCL) and bioactive glass (BG) was applied on the surface of Mg scaffolds using dip-coating technique under low vacuum. The results indicated that the PCL-BG coated Mg scaffolds exhibited noticeably enhanced bioactivity compared to the uncoated scaffold. Moreover, the mechanical integrity of the Mg scaffolds was improved using the PCL-BG coating on the surface. The stable …

Polysaccharide-Based Shear Thinning Hydrogels For Three-Dimensional Cell Culture, Vasudha Surampudi

Theses and Dissertations

The recreation of the complicated tissue microenvironment is essential to reduce the gap between in vitro and in vivo research. Polysaccharide-based hydrogels form excellent scaffolds to allow for three-dimensional cell culture owing to the favorable properties such as capability to absorb large amount of water when immersed in biological fluids, ability to form “smart hydrogels” by being shear-thinning and thixotropic, and eliciting minimum immunological response from the host. In this study, the biodegradable shear-thinning polysaccharide, gellan-gum based hydrogel was investigated for the conditions and concentrations in which it can be applied for the adhesion, propagation and assembly of different mammalian …

Development And Degradation Behavior Of Magnesium Scaffolds Coated With Polycaprolactone For Bone Tissue Engineering, Mostafa Yazdimamaghani, Mehdi Razavi, Daryoosh Vashaee, Lobat Tayebi

Chemical and Biochemical Engineering Faculty Research & Creative Works

Rapid degradation of magnesium (Mg) alloys is the major drawback preventing these materials from being applicable as tissue engineering scaffolds. In order to resolve this issue, in this paper, porous Mg scaffolds coated by polycaprolactone (PCL) were synthesized and their material properties and in vitro biodegradation were fully examined. The results indicated that PCL coating can significantly enhance the compressive strength and degradation resistance of Mg scaffolds. We showed that while the uncoated Mg scaffold degrades completely (100% weight loss) after 72 h, the degradation (weight loss) of the Mg scaffolds coated by 3% and 6% PCL is only 36% …

Improvements To Uhmwpe, Brooke Mckelvogue

Journal of Undergraduate Research at Minnesota State University, Mankato

Ultra high molecular weight polyethylene (UHMWPE) is a material used in artificial implants for articular joint replacements. However, these implants have a limited lifespan in which the patient will be pain-free due to the wear of the UHMWPE components. Recently crosslinking, or exposing the material to radiation, has been used to extend the wear resistance of UHMWPE. Crosslinking introduces another set of drawbacks; mainly the reduction of the fracture toughness of UHMWPE and the generation of free radicals, which leave the polymer vulnerable to damage from oxidation. Currently, research is being conducted on other methods to increase the wear resistance …

A Rubric For Electrochemical Testing Of Metallic Biomaterials, Frederick G. De La Fuente

Master's Theses

Corrosion is a major factor for the failure of metallic medical implants. Testing a metal’s suseptability to corrosion prior to implantation is key to a successful implantation. Electrochemical processes were used in this study to evaluate the characteristics of corrosion of both AISI 316 stainless steel and titanium alloy Ti6Al4V, welded and non-welded. Linear, potentiodynamic, and cyclic polarization curves were produced by the PARC 2273 potentiostat showing the corrosion tendencies of the metals in four unique solutions 3.5% NaCl, 0.35% NaCl, phosphate buffered saline solution (PBS), and Butterfield phosphate buffered solution (BPS). The concentration of chloride ions in solutions affected …

Sic For Advanced Biological Applications, Joseph Register

USF Tampa Graduate Theses and Dissertations

Silicon carbide (SiC) has been used for centuries as an industrial abrasive and has been

actively researched since the 1960's as a robust material for power electronic applications.

Despite being the first semiconductor to emit blue light in 1907, it has only recently been

discovered that the material has crucial properties ideal for long-term, implantable biomedical

devices. This is due to the fact that the material offers superior biocompatibility and

hemocompatibility while providing rigid mechanical and chemical stability. In addition, the material

is a wide-bandgap semiconductor that can be used for optoelectronics, light delivery, and optical

sensors, which is the …

Stability Of Silk And Collagen Protein Materials In Space, Xiao Hu, Waseem K. Raja, Bo An, Olena Tokareva, Peggy Cebe, David L. Kaplan

College of Science & Mathematics Departmental Research

Collagen and silk materials, in neat forms and as silica composites, were flown for 18 months on the International Space Station [Materials International Space Station Experiment (MISSE)-6] to assess the impact of space radiation on structure and function. As natural biomaterials, the impact of the space environment on films of these proteins was investigated to understand fundamental changes in structure and function related to the future utility in materials and medicine in space environments. About 15% of the film surfaces were etched by heavy ionizing particles such as atomic oxygen, the major component of the low-Earth orbit space environment. Unexpectedly, …

Scratch Damage Evolution On Metals In Total Joint Replacements, Caleb Eljach

All Theses

The goal of total joint replacement (TJR) is to replace nonfunctioning joint components and relieve pain, improve quality of life, and to improve joint function. Although TJR is a successful procedure, more than 54,000 knee revisions occur each year due to factors, such as wear, loosening, infection, fracture, instability, and patient related factors (Ranawat, 2010). TJRs consist of components typically composed of polyethylene and a metallic counterface (Navarro, 2008). The sliding contact that occurs between the metal and polyethylene components has been well studied and is shown to produce both surface damage and wear of the implant components (Barbour, 1997; …

Implantable Biosensors For Physiologic Status Monitoring During Hemorrhage, Christian Kotanen

All Dissertations

Trauma diagnostics and management are major aims of research for implantable amperometric enzyme biosensor technology. Biosensors are capable of monitoring metabolic variables in a minimally invasive manner and have great potential to augment current wireless vital sign monitoring technologies in order to make a more robust physiologic status monitoring platform. The dual responsive Electrochemical Cell-on-a-Chip Microdisc Electrode Array (ECC MDEA 5037) is a recently developed electrochemical transducer for use in a wireless, implantable biosensor system for the continuous measurement of interstitial glucose and lactate. Hyperglycemia arising from insulin resistance and hyperlactatemia arising from anaerobic metabolism both occur following trauma and …

Fabricating And Characterizing Physical Properties Of Electrospun Polypeptide-Based Nanofibers, Dhan Bahadur Khadka

USF Tampa Graduate Theses and Dissertations

This dissertation has aimed to fabricate polypeptide based biomaterial and characterize physical properties. Electrospinning is used as a tool for the sample fabrication. Project focused on determining the feasibility of electrospinning of certain synthetic polypeptides and certain elastin-like peptides from aqueous feedstocks and to characterize physical properties of polymer aqueous solution, cast film and spun fibers and fiber mats. The research involves peptide design, polymer electrospinning, fibers crosslinking, determining the extent of crosslinking, fibers protease degradation study, fibers stability and self-organization analysis, structure and composition determination by various spectroscopy and microscopy techniques and characterization of mechanical properties of individual suspended …

Investigation Of A New Material For Heart Valve Tissue Engineering, Claire Brougham, Gerard Cooney, Thomas Flanagan, Stefan Jockenhoevel, Fergal O'Brien

Conference Papers

No abstract provided.

Development And Characterization Of Plga And Eptfe Blood Vessel Mimics Using Gene Expression Analysis, Michael Gibbons, Sarah Ur

Biomedical Engineering

Tissue engineered blood vessels (TEBV’s) have the potential to act not only as a replacement for diseased vessels, but also as a testing platform for intravascular devices such as stents. To this end, the goal of this study was to develop protocols for the construction of TEBV’s composed of human vascular cells and either expanded polytetrafluoroethylene (ePTFE) or poly-lactic-co-glycolic acid (PLGA), as well as a protocol for gene expression in those TEBV’s. Initial experiments involved only human umbilical vein endothelial cells (HUVEC’s), but after low cell confluency and spreading in single-sodded vessels a second cell type, human umbilical vein smooth …

Engineering Of Polyamidoamine (Pamam) Dendrimers For Gene And Drug Delivery, Quan Yuan

Theses and Dissertations

Dendrimers are a class of polymers with a highly branched, three-dimensional architecture composed of an initiator core, several interior layers of repeating units and multiple surface groups. They have been recognized as the most versatile compositionally and structurally controlled nanoscale building blocks throughout the fields of engineering, materials science, chemistry, and biology, and they have been widely investigated for drug and gene delivery. Polyamidoamine (PAMAM) dendrimers have inherent properties for gene delivery because of their high buffering capacity, polycationic surface and numerous surface groups for biofunctionlization. This dissertation is organized into four independent sections. The first section investigates a series …