Biomedical Engineering and Bioengineering Commons^™

3d Printing With Photopolymerizable Polyester Resins For Resorbable Medical Device Applications, Mathew Murphy Stanford

All Dissertations

In the past decade, the healthcare industry has seen a significant increase in the use of additive manufacturing (AM or “3D printing”) with subsequent improvement in clinical outcomes.As an exceptional AM technology, vat-photopolymerization (VP), often called stereolithography, can create complex structures and has thus been adopted for a range of biomedical applications including surgical guides, temporary implants, and resorbable tissue scaffolds.However, limitations remain in the availability of photopolymerizable resin materials with appropriate mechanical performance, biodegradability, and biocompatibility for application to resorbable medical devices.

The objective of this work was to employ novel photopolymerizable polyester-based macromers in the development of resorbable …

A Comparative Biomechanical Investigation Of Porcine Neonatal And Adult Left Ventricular Tissues, Timothy R. Eastep

Bioengineering Theses - Archive

A current trend in cardiac muscle regeneration and repair is to recreate the biophysical and biomechanical environment of the neonatal hearts, which has been shown to promote cardiac regeneration. This translational need requires thorough understanding of the biomechanical properties of the neonatal hearts. In this study, we aim to (i) characterize the dynamic viscoelastic properties of the neonatal porcine left ventricular (LV) muscle and compare with the adult tissue behavior using a rheometer; (ii) perform histological assessment to identify the cellular and extracellular (ECM) microstructures that contribute to the observed biomechanical differences, and (iii) develop a light sheet imaging protocol …

Exploring The Effects Of Microarchitecture On Astrocyte Behavior And Vascular Remodeling In Spinal Cord Injury, Devin Gerber

Biomedical Engineering Undergraduate Honors Theses

Spinal cord injury (SCI) is a common condition and is characterized by traumatic and progressive damage that results in limited neuron regeneration and thus a restricted recovery. In SCI, the vasculature is also severely damaged, which exacerbates inflammation at the injury site. Specifically, insufficient angiogenesis occurs at the site of injury due to the fibrotic pathological microenvironment1 . SCI also leads to the formation of a fluid-filled cavity and thus gliosis and fibrosis, forming a dense glial and fibrotic scar around the cavity. The microenvironment at the injury site plays a significant role in astrocyte behavior, promoting the transformation of …

Rattus Norvegicus As A Biological Detector Of Clandestine Remains And The Use Of Ultrasonic Vocalizations As A Locating Mechanism, Gabrielle M. Johnston

Master's Theses

In investigations, locating missing persons and clandestine remains are imperative. One way that first responder and police agencies can search for the remains is by using cadaver dogs as biological detectors. Cadaver dogs are typically used due to their olfactory sensitivity and ability to detect low concentrations of volatile organic compounds produced by biological remains. Cadaver dogs are typically chosen for their stamina, agility, and olfactory sensitivity. However, what is not taken into account often is the size of the animal and the expense of maintaining and training the animal. Cadaver dogs are typically large breeds that cannot fit in …

Trace Dna Detection Using Diamond Dye: A Recovery Technique To Yield More Dna, Leah Davis

Master's Theses

This study aspires to find a new screening approach to trace DNA recovery techniques to yield a higher quantity of trace DNA from larger items of evidence. It takes the path of visualizing trace DNA on items of evidence with potential DNA so analysts can swab a more localized area rather than attempting to recover trace DNA through the general swabbing technique currently used for trace DNA recovery. The first and second parts consisted of observing trace DNA interaction with Diamond Dye on porous and non-porous surfaces.

The third part involved applying the Diamond Dye solution by spraying it onto …

A Comparison Of Optical Measurement Methods For The Growth Of S. Cerevisiae, Jackson Black

Chemical Engineering Undergraduate Honors Theses

Genetic engineering of living organisms provides the opportunity to express and harvest different proteins from cell surfaces. Yeast (S. cerevisiae) is one such organism and is capable of being grown on an industrial scale. Cellular concentration is an important parameter to monitor while fermentation processes are underway, in order to control the environment inside the growth medium and maximize yields. Spectrophotometry is a conventional method for measuring concentration, but is limited by a narrow absorbance range, and the need for on-site periodic sampling. A continuous method of measurement, as provided by Bug Labs BE2100 non-invasive biomass monitor, would …

Light Sheet Microscopy Incubation Design And Control Scheme, Venkatanathan Kidambi

Honors Scholar Theses

The focus of the following paper is the development of a light sheet or selective plane illumination microscopy (LSM / SPIM) platform to support long duration three dimensional imaging of various cells and tissues. This paper describes the complete design and fabrication process behind the prototype, including a definition of light sheet microscopy and its differences from confocal microscopy, as well as existing open source selective plane microscopy literature and designs. The complete engineering design process as applied to the microscope design is described in detail. Specifically, this paper will focus on the development of an incubation chamber for light …

Laser Inscribed Graphene Aptasensor For Detection Of Apple Stem Pitting Virus, Yifan Tang

All Theses

Apple stem pitting virus (ASPV) is a latent RNA virus that could cause significant loss to apple production; early-stage field diagnosis could reduce the economic loss caused by ASPV infection. Biosensor is a promising user-friendly detection tool that could transduce biological or chemical interactions into electric signals. Among various types of biosensors, aptasensor, which use aptamers as recognition elements show potential as a high throughput, in-field test. The goal of this thesis is to develop an electrochemical aptasensor testing system for ASPV detection. The quality control study of laser inscribed graphene (LIG) based working electrode of the biosensor was conducted …

Scan2drawing: Use Of Deep Learning For As-Built Model Landscape Architecture, Sisi Han, Yuhan Jiang, Yilei Huang, Mingzhu Wang, Yong Bai, Andrea Spool-White

Biomedical Engineering Faculty Research and Publications

This paper presents an innovative and fully automatic solution of generating as-built computer-aided design (CAD) drawings for landscape architecture (LA) with three dimensional (3D) reality data scanned via drone, camera, and LiDAR. To start with the full pipeline, 2D feature images of ortho-image and elevation-map are converted from the reality data. A deep learning-based light convolutional encoder–decoder was developed, and compared with U-Net (a binary segmentation model), for image pixelwise segmentation to realize automatic site surface classification, object detection, and ground control point identification. Then, the proposed elevation clustering and segmentation algorithms can automatically extract contours for each instance from …

Cortical Effects Of Wrist Tendon Vibration During An Arm Tracking Task In Chronic Stroke Survivors: An Eeg Study, Dylan B. Snyder, Scott A. Beardsley, Allison S. Hyngstrom, Brian D. Schmit

Biomedical Engineering Faculty Research and Publications

The purpose of this study was to characterize changes in cortical activity and connectivity in stroke survivors when vibration is applied to the wrist flexor tendons during a visuomotor tracking task. Data were collected from 10 chronic stroke participants and 10 neurologically-intact controls while tracking a target through a figure-8 pattern in the horizontal plane. Electroencephalography (EEG) was used to measure cortical activity (beta band desynchronization) and connectivity (beta band task-based coherence) with movement kinematics and performance error also being recorded during the task. All participants came into our lab on two separate days and performed three blocks (16 trials …

Effect Of Human Decellularized Skeletal Muscle On Recovery From Volumetric Muscle Loss Injury, Jacob Schluns

Graduate Theses and Dissertations

Volumetric muscle loss (VML) overwhelms muscle’s robust capacity for regeneration. A key event in the etiology of VML injury is the bulk loss of structural cues provided by the underlying extracellular matrix (ECM). While muscle is a highly structured tissue, with cell and ECM alignment in the direction of contractile force production, the impact of scaffold alignment on recovery remains unclear. Bulk human decellularized skeletal muscle (DSM) tissues were sectioned into 10 x 1-2 mm fibers. VML defects were repaired using multi-fiber implants consisting of approximately 8 fibers per defect arranged into two layers. Fibers were oriented 1) to the …

Mitral Valve Imaging And Biomechanics: A Workflow Towards Computational Modeling And Validation, Sam Stephens

Graduate Theses and Dissertations

The mitral valve serves a critical role in healthy cardiac function by ensuring the unidirectional flow of oxygenated blood from the left atrium into the left ventricle. It experiences the highest pressures found within the heart and its closure is the result of a complex interaction of several different structures that, furthermore, are unique to each individual. Despite the valve’s vital role however, the specific function of these constituent structures is not fully understood. This, confounded by its asymmetric, personalized nature, make surgical interventions for the mitral valve far less effective than for its neighboring aortic valve. Efforts to overcome …

Automated Segmentation Of Autofluorescence Lifetime Images Using A Convolutional Neural Network, Nicole Hooten

Biomedical Engineering Undergraduate Honors Theses

Chronic wounds affect nearly 1 out of every 50 people in the United States, decreasing quality of life and putting people with potential comorbidities at high risk for obtaining an infection. Wound healing progress in clinical settings is measured by tracking wound size and there are currently no non-invasive, quantitative measurement techniques. Previous studies have proposed nicotinamide adenine dinucleotide (NADH) autofluorescence lifetime (FLIM) imaging of the wound edge as a method to quantify the wound healing process by connecting the role of NADH in cellular metabolism to wound healing stage. However, evaluation of FLIM images is heavily subjective, as a …

Preparing Homogenous Composites Of Collagen And Cellulose Nanocrystals For Tissue Engineering Research, Zachary Stanley

Biological and Agricultural Engineering Undergraduate Honors Theses

Advancements in medicine and our understanding of stem cells have led to a greater emphasis on further developing research focused on tissue engineering. This research has led to the rise of both two-dimensional and three-dimensional scaffolds that can be utilized to repair bone, skin, vascular, and potentially even nervous tissue. One of the prominent compounds used in modern scaffolds is collagen-based hydrogels due to their low antigenicity and ability to provide structure to cells. There is potential to further improve upon this three-dimensional scaffold by incorporating cellulose nanocrystals (CNCs) into a composite hydrogel with collagen. The addition would increase the …

A Proof Of Concept For Detection Of Palato-Lingual Contact Without Intraoral Electrodes In A Human Participant, Amitava Biswas

Master's Theses

The author of this thesis conceived and investigated an unexpected electrical signal that may not be noticed during regular electroglottography (EGG) when electrodes are conventionally placed on the anterior surface of the throat. It appears that there is a measurable electrical signal from the EGG equipment when electrodes are placed over the frontal cheek (belly of zygomatic muscle), and the tongue is elevated to contact the hard palate, or the tongue is lowered to break the contact. Therefore, this phenomenon is designated as unconventional electroglottography (UEGG, Dr. Steven Cloud, private communication, July 17, 2022).

Two distinctive patterns of waveforms were …

The Influence Of Myoblast Implantation On Arteriogenesis In Mice With Diet-Induced Obesity, Rayana Gutierrez

Biomedical Engineering

Peripheral arterial occlusive disease (PAOD) is characterized by atherosclerosis, which is the buildup of plaque, consisting largely of cholesterol, in the arterial walls. This plaque accumulation eventually blocks blood flow to the limbs, causing symptoms such as intermittent claudication and tissue death in cases of critical limb ischemia. The body compensates for the reduced perfusion by enlarging pre-existing bypass arteries, known as collaterals, in a process called arteriogenesis. However, in many cases, collateral networks constructed through arteriogenesis fail to enlarge sufficiently or function effectively in patients. Therefore, the development of a therapeutic intervention specifically targeting this process would offer a …

Structure-Property-Processing Analysis Of Graphene Bioscaffolds For Viability And Differentiation Of C2c12 Cells, Lynn Karriem

Boise State University Theses and Dissertations

We investigated the structure – property – processing correlation of graphene bioscaffolds produced using three different methods. Bioscaffolds were prepared by chemical vapor deposition (CVD), sublimation of Silicon Carbide (SiC), and printed solvent assisted exfoliated graphene ink. To gain insight into the roughness and topography of graphene, AFM was performed on each bioscaffold. Raman spectroscopy mapping demonstrated differences in the I_2D/I_G ratio for each scaffold. Young’s modulus was determined by nanoindentation and indicated that epitaxial graphene had the highest average stiffness, followed by CVD, with printed graphene demonstrating the lowest average stiffness. To investigate the biocompatibility of …

Correlation Of Intracellular Metabolites With Optical Metabolic Imaging In Polarized Macrophages As Indicators Of Metabolic Reprogramming, Abby Claire Denison, Shelby Bess

Biomedical Engineering Undergraduate Honors Theses

Macrophages are a type of immune cell that are characterized by their ability to differentiate into various active phenotypes based on environmental stimuli. They can generally be classified as one of two extremes: inflammatory/M1 or wound-healing/M2. Macrophage populations in vivo, however, are rarely homogenous, and since macrophages play vital roles in the immune response, particularly in the context of the tumor microenvironment (TME), it’s important to be able to investigate and understand heterogenous macrophage populations to develop more effective treatments. Recently, autofluorescence imaging such as multiphoton microscopy and fluorescence lifetime imaging microscopy (FLIM) of metabolic cofactors NADH and FAD have …

Comprehensive Long- And Short- Read Sequencing Approaches To Screen The Mutational Landscape After Therapeutic Crispr-Editing For Duchenne Muscular Dystrophy, Mary Jia, Made Harumi Padmaswari, Landon Burcham, Shilpi Agrawal, Alexis Ivy, Abbey Bryan, Christopher E. Nelson

Biomedical Engineering Undergraduate Honors Theses

Duchenne muscular dystrophy (DMD) is an X-linked muscle wasting disease caused by mutations in the Dmd gene resulting in non-functional dystrophin. Adeno-associated virus (AAV)-mediated delivery of classical CRISPR systems resulting in double-stranded breaks (DSBs) has yielded promise as a curative DMD therapeutic. However, the consequences of AAV-CRISPR require more thorough characterization. PCR-enriched short-read amplicon sequencing at cut sites is the most common method of sequencing CRISPR editing, but PCR bias results in unreliable quantification of on-target edits. We analyze orthogonal long- and short-read sequencing approaches to screen the outcomes of CRISPR technologies at the DNA and RNA-level for DMD. We …

A Wheelchair-Bed Transfer Device For Patients With Limited Mobility, Malachie Nichols

Biomedical Engineering Undergraduate Honors Theses

As the population ages, eldercare becomes more important than ever, yet many caregivers lack the resources they need to safely do their jobs. For those who take care of a disabled loved-one at home or work as home health aides, basic tasks can be frustrating and even dangerous. The high physical demands of moving and lifting patients make injuries common among home health care workers. Musculoskeletal injuries to the back, shoulders, wrists, and hands are especially common. The use of transfer devices such as Hoyer lifts, slide boards, and gait belts help to make moving patients easier and safer, but …

Nanosecond Pulsed Electric Field Modulates Electron Transport And Mitochondrial Structure And Function, Lucas Nelson Potter

Biomedical Engineering Theses & Dissertations

Pulsed power treatment has been used to induce regulated cell death (RCD) in cells or ablate tumors in animals. A subset of pulsed power as electroporation with high voltage and pulse duration of milliseconds is used for biomedical treatment to induce pores in the plasma membrane of cells. Nanosecond Pulsed Electric Fields (nsPEFs)– an extension of electroporation, uses waveforms with pulse durations on the order of 10-900 nanoseconds. nsPEF treatment has demonstrated intracellular effects for potential biomedical applications. In this work, nsPEF treatment is used to demonstrate changes that affect viability, plasma membrane permeability ROS (Reactive Oxygen Species) in the …

Validation Of Meta Motion Imu Sensors Through Measurement Of Knee Angles During Gait, Kerri Caruso

Biomedical Engineering Theses & Dissertations

The implementation of inertial measurement units (IMU) in the biomechanical field has become increasingly popular due to their robustness, simplicity, accuracy, and the ability to move research out of a lab and into the real world. In this study, the MetaMotion IMU sensors are assessed for validity against a dynamometer and the Vicon motion capture system. Both systems have proven their measuring accuracies in the biomechanics world and are used as the truth source for this validation study. In the first part of this study, the sensors are assessed for various common sensor errors. Individual sensor components of the IMU, …

Cardiac Ablation And Stimulation With Nanosecond Pulsed Electric Fields (Nspefs), Federica Serra

Biomedical Engineering Theses & Dissertations

Surgical ablation of cardiac tissue is the definitive treatment for the most common arrhythmia, atrial fibrillation. In current medical practice, myocardial tissue is often ablated by the application of radiofrequency (RF) currents which are delivered through an electrode to create lesions that block the electrical pathways that sustain reentrant arrhythmias and restore the normal heart rhythm. An alternative to RF is cryoablation, during which the endocardial or epicardial tissue is brought in contact with a cryoprobe. Both RF ablation and cryoablation have significant limitations. In RF ablation, tissue is heated in order to ablate it, but it is an open …

Study Of The Stability Of Heparin/Collagen Layer-By-Layer Coatings, Hector M. Apodaca Reyes

Chemical Engineering Undergraduate Honors Theses

Pairing heparin with collagen-based medical implants has opened a whole new area of research for enhancing the desired effect of current implants. In fact, heparin (HEP) and collagen (COL) layer-by-layer (LbL) coatings have shown impressive results in forming polyelectrolyte multilayers. It has been already seen on skin grafts, nerve guide conduits (NGCs), and drug delivery devices yielding promising results. Due to being a simple, cost-efficient, and versatile option to fabricate thin biomimetic films, this self-assembly technique is one of the most effective methods to immobilize extracellular matrix (collagen and heparin) onto medical devices and implants. Even though previous studies have …

Characterizing And Quantifying Shear-Induced Hemolysis In A Hollow Fiber Membrane System, Siddhi Bhat

Chemical Engineering Undergraduate Honors Theses

Clinical studies have shown that patients undergoing renal replacement therapy are more susceptible to developing hemolysis, or the rupturing of red blood cells. Rapid hemolysis can cause symptoms such as anorexia, vomiting, and even death in severe cases. The aim of this study is to identify how shear stress within a hollow fiber membrane impacts the level of hemolysis that occurs. This allows for the optimization of the ultrafiltration membranes that are typically used for hemofiltration treatments. The variables being studied are the radii of hollow fibers, number of fibers, and volumetric flow rate of blood being circulated. Here, we …

Comparing Firocoxib And Meloxicam In The Application Of Microneedle Patch For Transdermal Drug Delivery, Ruohan Li

Chemical Engineering Undergraduate Honors Theses

This thesis compares the performance of meloxicam and firocoxib in the aspects of its physical characteristic, chemical compositions, and in-vitro performances for transdermal pain management microneedle patches on farm animals. The microneedle patches are composed of polyvinyl alcohol (PVA), type I collagen (COL), and chitosan (CHI) as base material that carries NSAIDs to achieve therapeutic purposes. Scanning electron microscopy (SEM) was utilized to observe the morphological and physical characteristics of the microneedle patches. Both meloxicam and firocoxib microneedle patches were successfully prepared using the methodology, with organized microneedle distribution and sizing. And Fourier transform infrared spectroscopy (FTIR) confirmed the chemical …

Interrogating Autism From A Multidimensional Perspective: An Integrative Framework., Mohamed T. Ali

Electronic Theses and Dissertations

Autism Spectrum Disorder (ASD) is a condition characterized by social and behavioral impairments, affecting approximately 1 in every 44 children in the United States. Common symptoms include difficulties in communication, interpersonal interactions, and behavior. While symptoms can manifest as early as infancy, obtaining an accurate diagnosis may require multiple visits to a pediatric specialist due to the subjective nature of the assessment, which may yield varying scores from different specialists. Despite growing evidence of the role of differences in brain development and/or environmental and/or genetic factors in autism development, the exact pathology of this disorder has yet to be fully …

Tumor Targeting Gold Nanoparticles For Delivery Of Rna And Dna Oligonucleotide Therapies For Glioblastoma., Nicholas Allen

Electronic Theses and Dissertations

Glioblastoma (GBM) brain tumors are highly aggressive gliomas due to genetic and cellular heterogeneity. Current GBM treatment consists of surgical resection of the tumor combined with radio- or chemo-therapies. While these treatments have increased the life expectancy for GBM patients up to 20 months, they have had little effect on the 5-year survival rate. The complex cellular and genetic composition of the tumor makes current treatments less effective long term. One approach to developing more effective GBM treatments is to customize nanoparticle-based drug delivery systems that can directly target the aberrant gene expression patterns within a particular GBM tumor. Delivery …

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

Polymeric Biomaterials Approaches For Engineering The In Vitro Cellular Microenvironment For Mscs, Mahsa Letter-Mahsa Haseli

Graduate Theses and Dissertations

Cell therapy is a technology that relies on replacing diseased or dysfunctional cells with healthy functioning ones. One of the cells used for such advanced therapies are stem cells, owing to their ability to differentiate into specific cells required for repairing damaged or defective tissues or cells. The majority of cell-based products are intended to transiently persist in the patient, secreting factors which then allow the patient’s body to heal; in these products, the cells are subsequently eliminated from the body. Furthermore, unique manufacturing platforms, in addition to novel commercialization strategies, will be required to create a successful, sustainable cell …