Biomedical Engineering and Bioengineering Commons^™

Breast Cancer/Stromal Cells Coculture On Polyelectrolyte Films Emulates Tumor Stages And Mirna Profiles Of Clinical Samples, Amita Daverey, Karleen M. Brown, Srivatsan Kidambi

Department of Chemical and Biomolecular Engineering: Faculty Publications

In this study, we demonstrate a method for controlling breast cancer cells adhesion on polyelectrolyte multilayer (PEM) films without the aid of adhesive proteins/ ligands to study the role of tumor and stromal cell interaction on cancer biology. Numerous studies have explored engineering coculture of tumor and stromal cells predominantly using transwell coculture of stromal cells cultured onto coverslips that were subsequently added to tumor cell cultures. However, these systems imposed an artificial boundary that precluded cell−cell interactions. To our knowledge, this is the first demonstration of patterned coculture of tumor cells and stromal cells that captures the temporal changes …

Multiphysics Modeling To Enhance Understanding Of Microwave Heating Of Food In Domestic Ovens, Jiajia Chen

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Nonuniform heating is the biggest issue in the microwave heating of prepared meals. Multiphysics based models are promising tools to improve microwave heating uniformity by properly designing the food product. However, limited availability of accurate temperature-dependent material properties, inadequate model prediction accuracy, and high computational power and complexity in model development are three gaps that greatly limited the application of these models in the food industry.

To fill in the gaps, firstly, we developed a multitemperature calibration protocol to measure temperature-dependent dielectric properties (dielectric constant and loss factor). The temperature-dependent dielectric and thermal (thermal conductivity and specific heat capacity) properties …

Vcare: A Personal Emergency Response System To Promote Safe And Independent Living Among Elders Staying By Themselves In Community Or Residential Settings, Priyankar Bhattacharjee

Department of Computer Electronics and Engineering: Dissertations, Theses, and Student Research

‘Population aging’ is a growing concern for most of us living in the twenty first century, primarily because many of us in the next few years will have a senior person to care for - spending money towards their healthcare expenditures AND/OR having to balance a full-time job with the responsibility of care-giving, travelling from another city to be with this elderly citizen who might be our parent, grand-parent or even community elders. As informal care-givers, if somehow we were able to monitor the day-to-day activities of our elderly dependents, and be alerted when wrong happens to them that would …

Modeling The Contributions Of Hand Loads To Cervical Spine Compressive Forces, Mohamed R.S. Amar

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

The purpose for this study is threefold. All involve single handed lifting tasks where the height of the lifted object, the distance of the lifted object from the body, and the angle of the lift relative to the body were varied. First, examine the activity of each of the shared musculature of selected shared muscles between the shoulder and cervical spine. Second, attempt to empirically model the activations of the shared muscles. Third, to understand the relationship between the active and antagonistic contraction. Finally, to establish a biomechanical model to estimate the compressive forces on the cervical spine.

Ten subjects …

Mitochondrial Dysfunction And Loss Of Glutamate Uptake In Primary Astrocytes Exposed To Titanium Dioxide Nanoparticles, Christina L. Wilson

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

The proper function of astrocytes is critical for brain health as they are the most abundant cells in the brain which monitor ion homeostasis, recycle neurotransmitters and respond to tissue damage therefore disruption in astrocyte function can result in overall detrimental effects and has been linked with neurodegenerative diseases. Titanium Dioxide (TiO₂) nanoparticles are currently the second most produced engineered nanomaterial in the world with vast usage in consumer products leading to recurrent human exposure. Animal studies indicate significant nanoparticle accumulation in the brain while cellular toxicity studies demonstrate negative effects on neuronal cell viability and function. However, …

Department Of Biological Systems Engineering Newsletter, Spring 2015

BSE Department Magazine

No abstract provided.

Greenhouse Gas Emissions Inventory Of The Centalized Renewable Energy System (Cres) At Nebraska Innovation Campus, Matan Gill, Adam Liska

Adam Liska Papers

The Centralized Renewable Energy System (CRES) at Nebraska Innovation Campus (NIC) is a heat-exchanger system that utilizes reclaimed, non-drinkable water from the nearby water treatment plant to heat and cool a projected 1.675 million square feet of office and lab space. A greenhouse gas emissions inventory was estimated for the CRES operating at full build-out of the campus in 2035, compared to conventional office space, being a control system with standard chiller and boiler configuration. The control system is estimated to emit 30,787 metric tons of carbon dioxide-equivalent per year (Mg CO₂e yr-1), whereas heating and cooling Nebraska …

Thermosensitive Gel Containing Cellulose Acetate Phthalate-Efavirenz Combination Nanoparticles For Prevention Of Hiv-1 Infection, Abhijit A. Date, Annemarie Shibata, Emily Mcmullen, Krista La Bruzzo, Patrick Bruck, Michael Belshan, You Zhou, Christopher J. Destache

Nebraska Center for Biotechnology: Faculty and Staff Publications

The objective of this investigation was to develop and evaluate a nano-microbicide containing a combination of cellulose acetate phthalate (HIV-1 entry inhibitor) and efavirenz (anti-HIV agent) for HIV prophylaxis. Cellulose acetate phthalate-efavirenz combination nanoparticles (CAP-EFV-NPs) were fabricated by the nanoprecipitation method and were characterized for particle size, zeta potential and encapsulation efficiency of efavirenz. CAP-EFV-NPs were incorporated into a thermosensitive gel (CAP-EFV-NP-Gel). CAP-EFV-NPs, CAP-EFV-NP-Gel and efavirenz solution were evaluated for cytotoxicity to HeLa cells and for in vitro short-term (1-day) and long-term (3-day) prophylaxis against HIV-1 infection in TZM-bl cells. CAP-EFV-NPs had size < 100 nm, negative surface charge and encapsulation efficiency of efavirenz was > 98%. CAP-EFV-NPs and CAP-EFV-NP-Gel were significantly less …

Technoeconomics And Sustainability Of Renewable Methanol And Ammonia Productions Using Wind Power-Based Hydrogen, Michael J. Matzen, Mahdi H. Alhajji, Yaşar Demirel

Yaşar Demirel Publications

This study analyzes and compares the economics and sustainability aspects of two hydrogenation processes for producing renewable methanol and ammonia by using wind-power based electrolytic hydrogen. Carbon dioxide from an ethanol plant is used for producing methanol, while the nitrogen is supplied by an Air Separation Unit (ASU) for producing ammonia. The capacities are 99.96 mt/day methanol and 1202.55 mt/day anhydrous ammonia. The methanol plant requires 138.37 mt CO₂/day and 19.08 mt H₂/day. The ammonia is synthesized by using 217.72 mt H₂/day and 1009.15 mt N₂/day. The production costs and the carbon …

Blast-Induced Mild Traumatic Brain Injury Through Ear Canal: A Finite Element Study, Praveen Akula, Yi Hua, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

Purpose The role of ear canal in transmitting blast waves to the brain is not clear. The goal of this work is to characterize the influence of ear canal on blast-induced mild traumatic brain injury through a computational approach.

Methods A three-dimensional human head model with single-side ear canal details was reconstructed from computed tomography images. The ear canal was positioned either facing the incident blast wave or facing away from the blast wave.

Results The blast wave-head interaction has demonstrated that the overpressure within the ear canal was substantially amplified when the ear directly faced the blast wave. When …

Characterization Of Closed Head Impact Injury In Rat, Yi Hua, Praveen Akula, Matthew Kelso, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

The closed head impact (CHI) rat models are commonly used for studying the traumatic brain injury. The impact parameters vary considerably among different laboratories, making the comparison of research findings difficult. In this work, numerical CHI experiments were conducted to investigate the sensitivities of intracranial responses to various impact parameters (e.g., impact depth, velocity, and position; impactor diameter, material, and shape). A three-dimensional finite element rat head model with anatomical details was subjected to impact loadings. Results revealed that impact depth and impactor shape were the two leading factors affecting intracranial responses.The influence of impactor diameter was region-specific and an …

Long-Acting Antituberculous Therapeutic Nanoparticles Target Macrophage Endosomes, Benson J. Edagwa, Dongwei Guo, Pavan Puligujja, Han Chen, Joellyn Mcmillan, Xinming Liu, Howard Gendelman, Prabagaran Narayanasamy

Nebraska Center for Biotechnology: Faculty and Staff Publications

Eradication of Mycobacterium tuberculosis (MTB) infection requires daily administration of combinations of rifampin (RIF), isoniazid [isonicotinylhydrazine (INH)], pyrazinamide, and ethambutol, among other drug therapies. To facilitate and optimize MTB therapeutic selections, a mononuclear phagocyte (MP; monocyte, macrophage, and dendritic cell)-targeted drug delivery strategy was developed. Long-acting nanoformulations of RIF and an INH derivative, pentenyl- INH (INHP), were prepared, and their physicochemical properties were evaluated. This included the evaluation of MP particle uptake and retention, cell viability, and antimicrobial efficacy. Drug levels reached 6 μg/106 cells in human monocyte-derived macrophages (MDMs) for nanoparticle treatments compared with 0.1 μg/106 cells for native …

A Highly Adaptive And Cost Effective Second Generation Incubator (Sgi) Towards Educational, Research And Clinical Processes, Yassir H. Al-Sayagh

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Today´s rising demand for more reliable and affordable alternatives to organ transplant has led to a growing market for in vitro tissue culture systems. The main objective of tissue engineering as a whole is to employ human tissue equivalents for commercial use. The state-of-the-art processes for producing these so called tissue models are still very expensive, difficult to produce and time-consuming.

To engineer tissues, in vitro, a three-dimensional support structure commonly termed scaffold is needed. Stem cells are then added to the scaffold. In order for tissue to materialize, the scaffold and the cells must be incubated (cultured) at a …

Low Molecular Weight Glucosamine/L-Lactide Copolymers As Potential Carriers For The Development Of A Sustained Rifampicin Release System: Mycobacterium Smegmatis As A Tuberculosis Model, Jorge Ragusa

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Tuberculosis, a highly contagious disease, ranks as the second leading cause of death from an infectious disease, and remains a major global health problem. In 2013, 9 million new cases were diagnosed and 1.5 million people died worldwide from tuberculosis. This dissertation aims at developing a new, ultrafine particle-based efficient antibiotic delivery system for the treatment of tuberculosis. The carrier material to make the rifampicin (RIF)-loaded particles is a low molecular weight star-shaped polymer produced from glucosamine (molecular core building unit) and L-lactide (GluN-LLA). Stable particles with a very high 50% drug loading capacity were made via electrohydrodynamic atomization. Prolonged …

Department Of Biological Systems Engineering Newsletter, Fall 2014

BSE Department Magazine

No abstract provided.

Applications Of Novel Mri Technologies In Tissue Engineering And Disease Diagnosis, Vahid Khalilzad-Sharghi

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Magnetic resonance imaging (MRI) and magnetic resonance elastography (MRE) are increasingly under investigation to explore their potential role in establishing effective evaluation methods for the procedure of tissue regeneration carried out in vitro, in vivo, and in disease diagnosis. To this end, there is a continuous pursuit of novel tools both in vitro and in vivo. For instance, there is a great need for the development and evaluation of an MR-compatible incubation system that enables simultaneous monitoring and culturing of cell and tissue constructs using MRI techniques. Such an imagingcompatible incubation system eliminates exposing the culture to the risks of …

Implementation And Validation Of Aortic Remodeling In Hypertensive Rats, Shijia Zhao, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

A computational framework was implemented and validated to better understand the hypertensive artery remodeling in both geometric dimensions and material properties. Integrating the stress-modulated remodeling equations into commercial finite element codes allows a better control and visualization of local mechanical parameters. Both arterial thickening and stiffening effects were captured and visualized. An adaptive material remodeling strategy combined with the element birth and death techniques for the geometrical growth were implemented. The numerically predicted remodeling results in terms of the wall thickness, inner diameter, and the ratio of elastin to collagen content of the artery were compared with and fine-tuned by …

An Experimental Study Of The Implementation Of A Fluid Diode Inside A Sano Shunt, Patrick Austin Lane

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Fluid diodes are fluidic devices that enhance fluid flow in a particular direction while inhibiting it in the opposite direction without the use of moving parts. This is accomplished through the use of nozzle shaped geometry on one side of the diode, and cusp shaped geometry on the opposing side. Fluid meets very little resistance as is travels though the nozzle side of the diode. The cusps on the other side of the diode reduce the effective flow area, thereby inhibiting flow. The objective of this study is to determine the effectiveness of a fluid diode installed in a reconstructed …

Virus-Host Mucosal Interactions During Early Siv Rectal Transmission, Wuxun Lu, Fangrui Ma, Alexander Churbanov, Yanmin Wan, Yue Li, Guobin Kang, Zhe Yuan, Dong Wang, Chi Zhang, Jianqing Xu, Mark Lewis, Qingsheng Li

Nebraska Center for Biotechnology: Faculty and Staff Publications

To deepen our understanding of early rectal transmission of HIV-1, we studied virus-host interactions in the rectal mucosa using simian immunodeficiency virus (SIV)-Indian rhesus macaque model and mRNA deep sequencing. We found that rectal mucosa actively responded to SIV as early as 3 days post-rectal inoculation (dpi) and mobilized more robust responses at 6 and 10 dpi. Our results suggests that the failure of the host to contain virus replication at the portal of entry is attributable to both a high-level expression of lymphocyte chemoattractant, proinflammatory and immune activation genes, which can recruit and activate viral susceptible target cells into …

Implementation And Validation Of Aortic Remodeling In Hypertensive Rats, Shijia Zhao, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

A computational framework was implemented and validated to better understand the hypertensive artery remodeling in both geometric dimensions and material properties. Integrating the stress-modulated remodeling equations into commercial finite element codes allows a better control and visualization of local mechanical parameters. Both arterial thickening and stiffening effects were captured and visualized. An adaptive material remodeling strategy combined with the element birth and death techniques for the geometrical growth were implemented. The numerically predicted remodeling results in terms of the wall thickness, inner diameter, and the ratio of elastin to collagen content of the artery were compared with and fine-tuned by …

Design And Development Of A Miniature In Vivo Surgical Robot With Distributed Motor Control For Laparoendoscopic Single-Site Surgery, Eric J. Markvicka

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Paradigm shifts in invasiveness, recovery time, cosmesis, and cost have been seen within the field of general surgery through major advances in surgical technology. Some of the most advanced types of general surgery now include Minimally Invasive Surgery (MIS), LaparoEndoscopic Single-Site (LESS) surgery, and Natural Orifice Translumenal Endoscopic Surgery (NOTES). One of the newest and rapidly developing catalysts is robotic platforms. Such platforms have improved ergonomics and control, increased workspace and dexterity, and have surpassed the efficacy of many non-robotic platforms such as traditional laparoscopic surgical tools. This thesis presents the design and development of a four-degree-of-freedom (4- DOF) miniature …

Fluid Powered Miniature In Vivo Robots For Minimally Invasive Surgery (Mis), Abolfazl Pourghodrat

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Minimizing the invasiveness of surgery is believed to improve patient outcomes. Bleeding, infection, and pain are major concerns in surgery afflicting patients for decades. Minimally invasive techniques have come into play to reduce these concerns and smooth the evolution of abdominal surgery to a scarless process where nearly all surgeries can be performed without a skin incision. Technology continually advances the frontier of development of novel surgical devices to implement less invasive surgical techniques.

Fusion of robotics and Minimally Invasive Surgery (MIS) has created new opportunities to develop diagnostic and therapeutic tools. Surgical robotics is advancing from externally actuated systems …

Experimental And Numerical Investigation Of The Mechanism Of Blast Wave Transmission Through A Surrogate Head, Yi Hua, Praveen Akula, Linxia Gu, Jeff Berg, Carl A. Nelson

Department of Mechanical and Materials Engineering: Faculty Publications

This work is to develop an experiment-validated numerical model to elucidate the wave transmission mechanisms through a surrogate head under blast loading. Repeated shock tube tests were conducted on a surrogate head, i.e., water-filled polycarbonate shell. Surface strain on the skull simulant and pressure inside the brain simulant were recorded at multiple locations. A numerical model was developed to capture the shock wave propagation within the shock tube and the fluid-structure interaction between the shock wave and the surrogate head. The obtained numerical results were compared with the experimental measurements. The experiment-validated numerical model was then used to further understand …

Preliminary Test Of A Real-Time, Interactive Silent Speech Interface Based On Electromagnetic Articulograph, Jun Wang, Ashok Samal, Jordan R. Green

School of Computing: Conference and Workshop Papers

A silent speech interface (SSI) maps articulatory movement data to speech output. Although still in experimental stages, silent speech interfaces hold significant potential for facilitating oral communication in persons after laryngectomy or with other severe voice impairments. Despite the recent efforts on silent speech recognition algorithm development using offline data analysis, online test of SSIs have rarely been conducted. In this paper, we present a preliminary, online test of a real-time, interactive SSI based on electromagnetic motion tracking. The SSI played back synthesized speech sounds in response to the user’s tongue and lip movements. Three English talkers participated in this …

Developing Defined And Scalable 3d Culture Systems For Culturing Human Pluripotent Stem Cells At High Densities, Yuguo Lei, Daeun Jeong, Jifang Xiao, David V. Schaffer

Department of Chemical and Biomolecular Engineering: Faculty Publications

Human pluripotent stem cells (hPSCs)—including embryonic stem cells (hESCs) and induced pluripotent stem cells (hiPSCs)—are very promising candidates for cell therapies, tissue engineering, high throughput pharmacology screens, and toxicity testing. These applications require large numbers of high quality cells; however, scalable production of human pluripotent stem cells and their derivatives at a high density and under well-defined conditions has been a challenge. We recently reported a simple, efficient, fully defined, scalable, and good manufacturing practice (GMP) compatible 3D culture system based on a thermoreversible hydrogel for hPSC expansion and differentiation. Here, we describe additional design rationale and characterization of this …

Fluid Flow-Induced Mesenchymal Stem Cell Migration: Role Of Fak And Rock Mechanosensors, Brandon D. Riehl

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The study of mesenchymal stem cell (MSC) migration under mechanical stimulation conditions with investigation of the underlying molecular mechanism could lead to a better understanding and outcomes in stem cell-based regenerative medicine. MSCs having multipotent regenerative capability exist in niches in the bone marrow, muscle, vasculature, and in other tissues throughout the body, and their migration through tissues and vasculature for the repair of damaged tissue is a key process of cell and tissue homeostasis, remodeling, and regeneration. While cell migration in response to cytokines and other chemo-attractants is relatively well understood, little is revealed in regard to the effect …

Application Of Limited Mixing In The Hele–Shaw Geometry In Fabrication Of Janus Hydrogels, Md Mahmudur Rahman

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

It is widely accepted that cells behave differently responding to the stiffness of their extracellular matrix (ECM). Such observations were made by culturing cells on hydrogel substrates of tunable stiffness. However, it was recently proposed that cells may sense how strongly they are tethered to ECM, not the local stiffness of ECM. To investigate both hypotheses, we developed a method to fabricate Janus polyacrylamide (PAAM) gels. We squeeze two drops of different concentrations in the Hele-Shaw geometry to generate radial Stokes flow. When the drops coalesce, limited mixing occurs at the interface due to the narrow confinement, and diffusion normal …

Characterization Of Extraction Methods To Recover Phenolic-Rich Antioxidants From Blue Green Algae (Spirulina) Using Response Surface Approaches, Ahmad Salamatullah

Department of Food Science and Technology: Dissertations, Theses, and Student Research

Blue green algae (spirulina) is a dietary system that is widely consumed as a whole food or as a supplement in many Asian countries where populations are mostly unaffected by many of the diseases currently afflicting western societies, such as cancer, heart disease and arthiritis. Indeed, spirulina is a rich source of antioxidants with the phenolic compounds playing a significant role. As components of a complex dietary system, phenolic compounds can act alone or through synergistic mechanisms to impart a greater biologic effect than can be elicited by a sum of the individual parts. Therefore, an understanding of the antioxidative …

Department Of Biological Systems Engineering Newsletter, April 2014

BSE Department Magazine

No abstract provided.

Head Impact Exposure In Male And Female Collegiate Ice Hockey Players, Bethany J. Wilcox, Jonathan G. Beckwith, Richard M. Greenwald, Jeffrey J. Chu, Thomas W. Mcallister, Laura A. Flashman, Arthur C. Maerlender, Ann-Christine Duhaime, Joseph J. Crisco

Department of Psychology: Faculty Publications

The purpose of this study was to quantify head impact exposure (frequency, location and magnitude of head impacts) for individual male and female collegiate ice hockey players and to investigate differences in exposure by sex, player position, session type, and team. Ninety-nine (41 male, 58 female) players were enrolled and 37,411 impacts were recorded over three seasons. Frequency of impacts varied significantly by sex (males: 287 per season, females: 170, p < 0.001) and helmet impact location (p < 0.001) but not by player position (p = 0.088). Head impact frequency also varied by session type; both male and female players sustained more impacts in games than in practices (p < 0.001), however the magnitude of impacts did not differ between session types. There was no difference in 95th percentile peak linear acceleration between sexes (males: 41.6 g, females: 40.8 g), but 95th percentile peak rotational acceleration and HITsp (a composite severity measure) were greater for males than females (4424, 3409 rad/s2, and 25.6, 22.3, respectively). Impacts to the back of the helmet resulted in the greatest 95th percentile peak linear accelerations for males (45.2 g) and females (50.4 g), while impacts to the side and back of the head were associated with the greatest 95th percentile peak rotational accelerations (males: 4719, 4256 rad/sec², females: 3567, 3784 rad/sec², respectively). It has been proposed that reducing an individual’s head impact exposure is a practical approach for reducing the risk of …