Biomedical Engineering and Bioengineering Commons^™

Fill The Void - An Introductory Guide For Learning Medical Imaging, Reid Faith, Peter Gahan, Adam Trusty, Aleksandr Zyskin, Chukwuka Ukekwe, Denise Nchinda, Amanda K. Burbage, Alberto E. Musto

EVMS School of Health Professions Faculty Publications

No standardized, comprehensive approach for radiological image interpretation exists among medical schools in the United States of America. In order to rectify this, we outline a model aimed to help improve how medical imaging can be taught in medical schools. The VOID (Visualization, Orientation/Observation, Identification, Description) guide is a proposed universal, stepwise approach to medical image identification, interpretation, and communication. This structured guideline is aimed at building a foundation for students in early medical education. The VOID was applied to CT (Computed Tomography), MRI (Magnetic Resonance Imaging), and x-ray modalities as integrated sessions for medical students during human anatomy laboratory. …

Implementation And Clinical Utility Of Ultra-Low-Field Portable Magnetic Resonance Imaging For Postprocedural Neurological Evaluation In Ambulatory Neurosurgery: Illustrative Cases, Devan Patel, Vinay Jaikumar, Taysia P. T. Morioka, Laz Rifkin, Kenneth S. Jacoby, Jaims Lim, Anais Andrade, Aimee C. Degaetano, Pui Man Rosalind Lai, Elad I. Levy

EVMS School of Health Professions Faculty Publications

BACKGROUND

Elective endovascular neurosurgical procedures are increasingly performed in ambulatory neurosurgery centers, enabled by advances in catheter technology, safety of conscious sedation, and refined patient selection. Although complication rates are low, rapid evaluation of postprocedural neurological deficits remains critical. Conventional MRI is often impractical in outpatient or procedural settings, whereas ultra-low-field portable MRI (ULF-pMRI) systems (such as Swoop) allow bedside imaging with favorable diagnostic performance.

OBSERVATIONS

Two women in their 60s developed acute neurological deficits at an ambulatory neurosurgery center (ANSC) after diagnostic cerebral angiography in one case and elective internal carotid artery flow diversion in the other. In both …

Automation And Autonomy In The Ivf Laboratory: Concepts And Implications For Embryologists, Jacques Cohen, Gerardo Mendizabal-Ruiz, Giles Anthony Palmer, Giuseppe Silvestri, Mina Alikani

EVMS School of Health Professions Faculty Publications

Automation is regarded as the next phase in the evolution of laboratory IVF. Despite technological advances, most laboratory procedures remain operator-dependent, contributing to variability in performance and outcomes. While automation has improved reproducibility and efficiency in many areas of medicine, its adoption in IVF has been slow. This review examines how automation may be integrated into IVF laboratories through a set of conceptual distinctions. Automation refers to the execution of procedural steps by machine-controlled systems, whereas autonomy describes the degree to which such systems can operate without human intervention. This review distinguishes between static automation, which maintains or monitors the …

Senescent Fibroblasts In Aging And Pulmonary Fibrosis, Sara B. Palega, Aiwei Y. Borengasser, Yan Y. Sanders

Department of Biomedical and Translational Sciences Faculty Publications

Aging is a major risk factor for many chronic lung diseases, including Idiopathic Pulmonary Fibrosis (IPF), a fatal and incurable disease characterized by progressive fibrotic remodeling. Age-associated structural alterations, impaired regenerative capacity, and dysregulated cellular signaling collectively create a pro-fibrotic microenvironment. A central driver of this pathological shift is the accumulation of senescent cells, which undergo irreversible growth arrest and develop a robust pro-inflammatory senescence-associated secretory phenotype (SASP). Emerging evidence identifies senescent lung fibroblasts as critical mediators of IPF pathogenesis. These cells promote excessive extracellular matrix deposition, myofibroblast differentiation, and tissue stiffening, while simultaneously impairing epithelial regeneration. Together, these effects …

Formulation Development Of Topical Inserts Containing Doxycycline And Doxycycline Combined With Tenofovir Alafenamide And Elvitegravir For The Prevention Of Sexually Transmitted Infections, Vivek Agrahari, M. Melissa Peet, Jasmin Monpara, Rijo John, Sriramakamal Jonnalagadda, Pardeep K. Gupta, Meredith R. Clark, Gustavo F. Doncel

CONRAD Publications

Despite advances in oral and injectable HIV prevention options and oral prophylaxis for sexually transmitted infections (STIs) of bacterial origin, there remains a critical need for effective on-demand topical (vaginal and rectal) products for pre- and post-exposure prophylaxis (PrEP and PEP). To fill this gap, we have developed single and first-in-kind multi-active topical inserts for bacterial STIs and HIV/STIs prevention. We have formulated two different inserts, one containing doxycycline (DOX) at 10, 50, and 100 mg doses for bacterial STI prevention, and a multipurpose prevention product (TED insert) that combines DOX (10 mg) with the antiretrovirals tenofovir alafenamide (TAF; 20 …

Privacy-Preserving Federated Learning With Optimized Ensemble Weighting And Knowledge Distillation For Covid-19 Detection From Non-Iid Medical Imaging Data, Richard Annan, Hong Qin, Robert Newman, Madhuri Siddula, Letu Qingge

Computer Science Faculty Publications

Medical imaging enables rapid and accurate diagnosis of COVID-19, with CT scans proving especially effective. However, data privacy concerns limit collaborative model development across hospitals. To address this issue, we introduce a novel federated learning framework. It is referred to as Independent Knowledge Distillation with post-Ensemble Federated Learning (IKDEFL). Differential Privacy (DP) is integrated into the framework to improve privacy guarantees. Three DP mechanisms are evaluated. These include Fixed Gaussian, Gaussian Adaptive, and Tree Adaptive. The evaluation has been conducted on heterogeneous and Non-Independent and Identically Distributed (Non-IID) datasets. These datasets reflect real-world hospital scenarios. Results show that IKDEFL significantly …

Isotropic Shrinkage Of Patterned Vacancies Enables Three-Dimensional Nanoprecise Metastructures For Visible Light Applications, Quansan Yang, Gaojie Yang, Takahiro Nambara, Hiroyuki Kusaka, Yuichiro Kunai, Alex C. Matlock, Corban Swain, Brett Pryor, Yannick Salamin, Daniel Oran, Hasindu Kariyawasam, Ramith Hettiarachchi, Dushan Wadduwage, Marin Soljačić, Peter T. C. Soflaei, Edward S. Boyden

Computer Science Faculty Publications

Three-dimensional metastructures with nanoscale feature sizes exhibit unique properties compared with structures with larger feature sizes, but are difficult to fabricate. Here we introduce implosion carving (ImpCarv), a method for photopatterning vacancies of complex geometry throughout materials, followed by isotropic shrinkage (>10-fold). ImpCarv works by photoactivating sensitizers to generate reactive oxygen species that cleave a swollen hydrogel at defined points, followed by controlled shrinkage via dehydration. ImpCarv creates three-dimensional metastructures where the refractive index of each point throughout a material can be specified with nanoscale precision via material presence or absence. By leveraging refractive index programmability for precise phase …

Untrained Position-Encoded Multilayer Perceptron Network For Structured Illumination Microscopy Reconstruction, Sahil Sharma, Leonidas Zimianitis, Krishnendu Samanta, Balpreet Singh Ahluwalia, Joby Joseph, Dushan N. Wadduwage

Computer Science Faculty Publications

Structured Illumination Microscopy (SIM) enables super-resolution imaging by encoding high-frequency spatial information through patterned light. While traditional Fourier-based reconstruction methods are prone to artifacts under suboptimal conditions, recent deep learning approaches often require large training datasets and lack adaptability across different imaging setups. In this work, we present Position Encoded Multi-Layer Perceptron (PEM) network that leverages implicit neural representations (INRs) and SIM forward-model-driven modeling to reconstruct super-resolved images without any training data. PEM-SIM represents each spatial coordinate as a combination of sinusoidal functions across multiple frequencies, enabling rich encoding of fine spatial detail. A forward model grounded in SIM image …

Adaptive Self-Attention For Enhanced Segmentation Of Adult Gliomas In Multi-Modal Mri, Evan P. Savaria, Jiangwen Sun

Computer Science Faculty Publications

Every year there are an estimated 80,000–90,000 new glioma cases, highlighting the need for reliable imaging-based decision support. Although deep learning has improved tumor sub-region segmentation, many state-of-the-art models fail to fully capture complementary information across T1, T1Gd, T2, and FLAIR MRI modalities and often operate as “black boxes,” limiting physician trust when precise delineation is critical for surgical planning, radiation targeting, and treatment monitoring. To address these limitations, we propose AIMS, an Adaptive Integrated Multi-Modal Segmentation framework that maintains modality-specific feature streams and employs adaptive self-attention within a hierarchical CNN-Transformer architecture to prioritize and fuse multi-modal MRI features. We …

Susceptibility To High-Fidelity Misinformation: An Eye-Tracking Analysis, Yasasi Abeysinghe, Gavindya Jayawardena, Enkelejda Kasneci, Sampath Jayarathna

Computer Science Faculty Publications

With the rise of online misinformation and AI-generated text, understanding human perception of news truthfulness is critical. In this study, we examine visual attention and cognitive processing using eye-tracking measures as individuals read fake and real news articles sharing nearly identical structure and imagery, differing only in subtle textual changes. Using the public FakeNewsPerception dataset, we analyze advanced gaze measures, including scanpaths, AOI transitions, and luminance-corrected pupil measures, beyond basic gaze features, in relation to news truthfulness and perceived believability. Results show that, given the high fidelity of the fake news, readers exhibited comparable visual scanning patterns, attention allocation across …

Memebuddy: Dialog-Style Audio Representations For Engaging Non-Visual Meme Experiences, Chirag Bhansali, Vikas Ashok, Hae-Na Lee

Computer Science Faculty Publications

Image memes are a pervasive form of online communication, widely used to convey humor, opinions, and cultural references. Prior work has explored making memes accessible to blind users, primarily through auto-generated descriptive captions. While these approaches improve comprehensibility and sometimes incorporate prosodic or emotional cues, they often fail to capture the humor, narrative structure, and contextual nuances that make memes engaging. We present MemeBuddy, a system that models memes as dialog, generating structured, multi-turn audio representations using role-based speakers. MemeBuddy reinterprets a meme as a conversation between two speakers, integrating extracted meme text with contextual knowledge implicitly inferred by a …

Injectable Hydrogels For Bone Regeneration: Mechanical Reinforcement Strategies Using Nanoparticles And Nanofibers: Review Paper, Fariba Ganji, Morteza Mirzagoli, Lobat Tayebi

Electrical & Computer Engineering Faculty Publications

Background and Purpose: The growing demand for bone regeneration following severe injuries highlights the importance of scaffolds in bone tissue engineering (BTE). Injectable hydrogels have emerged as promising candidates because their properties closely mimic the native extracellular matrix (ECM). However, their limited mechanical strength and structural instability restrict their practical application. Approach: This review summarizes recent strategies for reinforcing in situ-forming injectable hydrogels to improve their mechanical performance for bone regeneration. Particular emphasis is placed on nanomaterial-based strategies, including the incorporation of nanoparticles and nanofibers, and their ability to enhance the physical properties of polymeric networks. Key Results: Evidence from …

Recent Advances In Bioceramics, Fundamental Properties And Future Perspective In Biomedical Applications ‒ A Review, Ayesha Younas, Muhammad Umar Aslam Khan, Mohd Faizal Binte Abdullah, Lobat Tayebi, Shuanghu Wang, Abdalla Abdal-Hay, Yichi Xu

Electrical & Computer Engineering Faculty Publications

Bioceramics are important biomaterials in biomedical engineering because of their biocompatibility, bioactivity, osteoconductivity, and structural resemblance to actual bone tissue. In recent years, materials science and nanotechnology have enabled the use of bioceramics in bone regeneration, dental restoration, tissue engineering, drug delivery systems, and implantable medical devices. This comprehensive review covers advances in bioceramics, including calcium phosphates, hydroxyapatite (HAp), tricalcium phosphate, bioactive glasses, zirconia, alumina, and multifunctional ceramic nanocomposites. Priority is given to techniques such as additive manufacturing, 3D printing, sol-gel processing, electrospinning, and nanostructuring to improve mechanical strength, porosity, bioactivity, and cell interactions. Recent advances include ion doping, surface …

Application Of A Hyaluronic Acid-Based Lotions Containing Hydroxyapatite Nano-Particles Approach For Treatment Of Initial Dental Caries, Zahra Gharavi, Zahra Namazi, Fatemehsadat Pishbin, Helia Givian, Maryam Torshabi, Farhood Najafi, Parisa Amdjadi

Electrical & Computer Engineering Faculty Publications

This study evaluated the remineralization potential of a ceramic–polyelectrolyte system, based on a novel combination of hydroxyapatite nanoparticles (HAp NPs) and a hyaluronic acid (HY) matrix, for dental enamel, a tissue that remains challenging to repair in clinical dentistry. Nano-Hydroxyapatite (nanoHAp) powder was synthesized and characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), field-emission scanning electron microscopy (FE-SEM), dynamic light scattering (DLS), and zeta potential analysis to confirm their crystalline structure, functional groups, morphology, particle size distribution, and colloidal stability. HY-based suspensions (remineralizing lotions) containing 5, 10, and 12 wt% of the synthesized nanoHAp particles were formulated via a …

3d-Printed Alginate Scaffolds Incorporated With Synergistic Strontium/Magnesium - Doped Bioglass Nanoparticles For Bone Regeneration: An In Vivo Evaluation In Rabbit Cranial Defects, Mehraneh Movahedi Aliabadi, Afsaneh Jahani, Seyed Majdoddin Vahidi Toorchi, Ali Moradi, Mohammad Hossein Ebrahimzadeh, Fatemeh Kalalinia, Farkhonde Sarhaddi, Lobat Tayebi, Nafiseh Jirofti

Electrical & Computer Engineering Faculty Publications

Nonunion fractures remain a major orthopedic challenge, highlighting the need for improved bone tissue engineering (BTE) strategies. This study hypothesized that incorporating Sr/Mg-doped 58S bioglass nanoparticles into 3D-printed alginate (Alg) scaffolds would improve their physicochemical, mechanical, and biological properties and enhance bone regeneration. Structural characterization showed that Sr/Mg-doping reduced bioglass size and produced interconnected porous scaffolds. Under wet conditions, Alg scaffold incorporating 2.5%Sr/Mg-doped 58S bioglass showed the highest Young’s modulus (0.4356 ± 0.0244 MPa), whereas under dry conditions, the Alg scaffold incorporating 5%Sr/Mg-doped 58S bioglass achieved the highest value (0.1945 ± 0.0519 MPa). In vitro studies demonstrated biocompatibility and enhanced …

Wip: Arduino-Based Pbl To Foster Entrepreneurial Mindset, Nathan Q. Holland, Vukica M. Jovanovic

Engineering Technology Faculty Publications

This work-in-progress paper examines a semester-long project-based learning initiative begun in an introductory engineering course during the Fall 2025 semester. The project aims to enhance students' hands-on experience by integrating information literacy, the engineering design process (EDP), and an entrepreneurial mindset (EM) [1]. The objective is to boost student confidence in teamwork, technical problem-solving, and application of skills, preparing them for future courses in their discipline. Students in this introduction to engineering course received an Arduino Uno R3 Controller board kit and additional sensors. They were tasked to develop a device addressing engineering in the medicine challenge of their choosing. …

Modeling Healthcare Data With Logistic Quantile And Uniform-Based Mixture Polynomial Distributions, Mohan D. Pant, Aditya Chakraborty, Jovanna A. Tracz

Epidemiology, Biostatistics, & Environmental Health Faculty Publications

Continuous healthcare data often deviate from normality, which can substantially increase the risk of making invalid inferences, given that many inferential statistical procedures rely on normality assumption. To obviate this issue, we propose a new family of non-normal distributions based on a linear combination of the quantile functions of standard logistic and uniform (0, 1) distributions. This new family of non-normal distributions is studied within three different methods: L-moments, conventional moments, and percentiles. Its performance is compared among the three methods in the context of parameter estimation and data modeling. The results of Monte Carlo simulation and bootstrapping techniques indicate …

Multisystem Predictors Of Dynamic Gait Stability Across Fall Risk In Older Adults, Ashwini Kulkarni, Neda Moghim, Ross Gore, Soumya Banerjee, Christopher K. Rhea, Brittany Samulski

Rehabilitation Sciences Faculty Publications

Gait stability arises from interactions between physiological, cognitive, and psychological systems, yet these domains are often assessed in isolation. This study examined multisystem predictors of anteroposterior margin of stability during walking (MoSAP) in community-dwelling older adults. Of 340 participants, 143 were retained after data quality screening (105 females; age: 70.8 ± 7.8 years). Participants completed the Physiological Profile Assessment (PPA), cognitive testing using Montreal Cognitive Assessment (MoCA), fear-of-falling evaluations using Modified Falls Efficacy Scale (MFES) and a biomechanical gait assessment during preferred and fast speeds. Participants were stratified into four PPA-based fall-risk groups: low, mild, moderate, and high risk. MoSAP …

Flexible Cu Nanostructured Laser-Induced Graphene Electrodes For Highly Sensitive And Non-Invasive Lactate Detection In Saliva, Anju Joshi, Gymama Slaughter

Center for Bioelectronics Publications

A scalable and facile fabrication strategy is presented for developing a flexible, nanostructured, non-enzymatic electrochemical sensor for lactate detection based on copper-modified laser-induced graphene (CuNPs/LIG). A one-step electrodeposition process was employed to uniformly decorate the porous LIG framework with copper nanostructures, offering a cost-effective and reproducible approach for constructing enzyme-free sensing platforms. Scanning electron microscopy and energy-dispersive X-ray spectroscopy confirmed dense Cu nanostructure loading and efficient interfacial integration across the conductive LIG surface. The resulting CuNPs/LIG electrode exhibited excellent electrocatalytic performance, achieving a sensitivity of 8.56 μA µM⁻¹ cm⁻² with a low detection limit of 42.65 …

Recent Advances In Triboelectric Nanogenerators For Biomedical And Cardiovascular Monitoring, Amit Sarode, Jegan Rajendran, Gymama Slaughter

Center for Bioelectronics Publications

Triboelectric nanogenerators (TENGs) have emerged as versatile self-powered platforms for wearable and implantable biomedical sensing, offering an alternative to battery-dependent electronic devices. By converting biomechanical energy from physiological motion into electrical signals, TENGs enable simultaneous energy harvesting and active sensing within flexible, lightweight, and biocompatible architectures. This review summarizes recent advances from 2020 to 2025 in triboelectric nanogenerator (TENG)-based cardiovascular monitoring. The discussion focuses on material systems, device configurations, sensing mechanisms, and applications including pulse detection and cuffless blood pressure estimation. Representative studies are compared to highlight emerging trends in wearable and self-powered sensing technologies. However, differences in experimental conditions, …

Mxene-Enabled Wearable Biosensors: A Design Framework For Autonomous Biosensing, Jegan Rajendran, Gymama Slaughter

Center for Bioelectronics Publications

MXenes, a rapidly expanding family of two-dimensional transition metal carbides and nitrides, have emerged as leading materials for wearable bioelectronics due to their metallic conductivity, termination-rich surfaces, mechanical compliance, and tunable interlayer structures. However, wearable biosensor performance does not arise from conductivity alone, but from coupled interactions among surface termination chemistry, heterointerface engineering, hierarchical architecture, and device integration under dynamic physiological conditions. This review establishes a predictive structure-interface-device framework linking MXene chemistry to system-level performance across electrochemical, mechanical, gas, optical, and energy-storage modalities. We analyze how termination-controlled adsorption governs charge transfer and selectivity, how heterojunction formation modulates carrier density and …

Advances And Challenges In Digitally Connected Point-Of-Care Biosensing, Abdellatif Ait Lahcen, Jegan Rajendran, Gymama Slaughter

Center for Bioelectronics Publications

Point-of-care (POC) biosensors are undergoing a paradigm shift from isolated diagnostic tools to digitally connected, intelligent platforms that enable continuous and decentralized healthcare delivery. This review critically examines recent advances in wearable, implantable, and portable biosensors, highlighting how integration with wireless communication, the Internet of Medical Things (IoMT), and artificial intelligence is transforming their functionality and clinical utility. Particular attention is given to innovations such as smartphone-enabled interfaces, cloud-based analytics, and machine learning-assisted analysis, which collectively enhance sensitivity, specificity, and user accessibility across diverse healthcare settings, from personalized home monitoring and bedside diagnostics to deployment in resource-limited regions. The review …

Linker-Free Gold-Sputtered Tapered Optical Fiber Plasmonic Sensors For High-Sensitivity Refractive Index Detection In Microfluidic Platforms, Erem Ujah, Gymama Slaughter

Center for Bioelectronics Publications

Gold-sputtered tapered optical fiber (Au-TOF) sensors were developed for high-sensitivity refractive-index (RI) detection using aqueous glucose standards spanning 1.33–1.41 RIU (0–50% w/v). The sensors were fabricated using a reproducible workflow combining flame-brushing tapering, plasma surface preparation, and rotational magnetron sputtering, enabling azimuthally uniform gold coatings without the use of thiol or sulfur linker chemistries. Two sputtering durations (24 s and 30 s) were investigated to examine thickness-dependent plasmonic coupling and sensing performance. Optical measurements were conducted using a broadband supercontinuum source and compact spectrometer within a 20 µL microfluidic sensing chamber. Increasing glucose concentration produced a monotonic decrease in transmission …

Electrochemical Hemoglobin Biosensors For Point-Of-Care Diagnostics, Ashwini Dantanarayana, Gymama Slaughter

Center for Bioelectronics Publications

Hemoglobin (Hb) and its glycated variant (HbA1c) are essential clinical biomarkers for diagnosing anemia, acute hemorrhage, and long-term glycemic control. The growing demand for decentralized point-of-care (POC) testing has accelerated the development of rapid, inexpensive, and portable electrochemical sensing platforms. These technologies exploit the intrinsic redox activity of the heme prosthetic group, yet achieving efficient direct electron transfer (DET) remains a fundamental challenge because the electroactive iron center is deeply embedded within the globin structure. This review critically examines recent advances in electrochemical Hb sensing, tracing the evolution of electrode architectures from conventional carbon substrates to nanostructured materials, including graphene, …

Engineering Electrospun Pvdf Nanofibers For Next-Generation Wearable Bioelectronics, Reshmi Banerjee, Gymama Slaughter

Center for Bioelectronics Publications

Electrospun poly(vinylidene fluoride) (PVDF) and P(VDF-TrFE) nanofibers offer a mechanically flexible, high-surface-area platform for wearable bioelectronics, including piezoelectric sensing and self-powered operation. This review establishes a process–structure–property–performance framework for engineering electrospun PVDF- and P(VDF-TrFE)-based wearable systems. Relationships amongst precursor composition, electrospinning parameters, fiber morphology and alignment, crystalline phase formation, dipole orientation, and device-level piezoelectric performance are examined. Electrospinning is compared with other established fabrication methods including solution casting, spin coating, melt processing, phase inversion, and printing in terms of electroactive β-phase fraction, flexibility, scalability, manufacturing complexity, cost, and wearable-device suitability. Device architectures and performance are evaluated across pressure and strain …

On The Scalability Of Anisotropic Mesh Adaptation On Distributed And Shared Memory Architectures For Numerical Approximations, Kevin Mark Garner Jr.

Computer Science Theses & Dissertations

Mesh generation is a critical component in numerical approximations of Partial Differential Equations (PDEs). One such example includes Computational Fluid Dynamics (CFD), as CFD simulations in turn are crucial for applications in many industries, such as personalized healthcare and the design of aerospace vehicles. Generating high quality meshes for large-scale CFD problems presents a significant bottleneck in the CFD workflow. This dissertation proposes “fast,” parallel 3D mesh generation methodologies that are designed to leverage the concurrency offered by emerging High-Performance Computing (HPC) architectures. First, a distributed memory method is presented that integrates a sequential state-of-the-art isotropic, advancing front local reconnection-based …

Novel Percutaneous Repair Of Femoral Pseudoaneurysms Using Perclose Proglide™: A Case Series, Ryan Mancoll, Emily Burnett, Nicholas Bandy, Benjamin Samberg, Thomas Cook, Jacob Hoffman, Christopher Murter, Matthew Rossi, David Dexter, Hosam El Sayed, Animesh Rathore Md

Cardiovascular Research Symposium

BACKGROUND - This case series details the novel use of the Perclose ProGlide closure device to successfully repair three separate cases of iatrogenic femoral pseudoaneurysms (PSAs) without attempting other modalities first. Conventional treatment methods of ultrasound-guided compression, duplex-directed thrombin injection (DDTI), or open surgical repair were contraindicated in these patients due to unique anatomy or advanced comorbidities.

METHODS – Details were gathered via a retrospective chart review.

RESULTS - In the first case, a 73-year-old female had an access site PSA off the superficial femoral artery (SFA) with concomitant arteriovenous fistula (AVF) and advanced cardiac disease. The ProGlide device was …

Effect Of Moderate Decrease In Contractility On Epithelial Cell-Cell Contacts Under External Stretch, Saika Sharmin

Mechanical & Aerospace Engineering Theses & Dissertations

Epithelial tissues are characterized by extensive cell–cell contacts and often subject to stretch during normal function. Cell-cell contact adhesion strength maintains mechanical continuity from cell to cell. Mechanical forces exerted by cells via actomyosin contractility are known to strengthen cell-cell adhesions to a certain extent. While it is known that a large decrease in contractility causes cell-cell contact rupture due to weakened adhesions, it is unclear how a moderate reduction in contractility affects cell-cell junction stability. Here, we studied how a moderate inhibition of non-muscle myosin II (NMII) affects the integrity of epithelial cell-cell contacts, especially when subject to the …

Advanced Analytical Biosensing For Cancer Detection And Neural Diagnostics Using Tapered Optical Fiber (Tof), Protonic, And High Throughput Microplate –Based Technologie, Bayan Hassan Alharbi

Chemistry & Biochemistry Theses & Dissertations

This dissertation investigates the development and application of advanced biosensing technologies to enhance early disease detection, neurological diagnostics, and bioactive compound evaluation. The research spans four key areas. First, it introduces tapered optical fiber (TOF)-based plasmonic biosensors for the non-invasive detection of prostate cancer, demonstrating high sensitivity and specificity compared to conventional diagnostic methods.

Second, it explores the use of fluorescent biosensors to test the Transmembrane Electrostatically Localized Proton (TELP) theory, shedding light on the role of localized protons in neuronal signaling and energy transfer. Third, the work presents a high-throughput, microplate-based biosensing platform for analyzing mitochondrial function under nanosecond …

Towards Improving Computational Modeling Of The Lumbar Spine - Impact Of Material Properties And Laminotomy On Spinal Biomechanics, Isaac K. Kumi

Mechanical & Aerospace Engineering Theses & Dissertations

Spinal ligaments play a crucial role in maintaining the mechanical stability of the lumbar spine. These dense, collagenous tissues not only resist excessive motion but also distribute loads between spinal components to protect neural structures. Traditionally, the mechanical response of ligaments has been modeled using linear elastic assumptions, which treat the tissue as having a constant stiffness regardless of loading history. While this simplifies analysis, it fails to capture the time-dependent behaviors, such as creep, stress relaxation, and hysteresis, that are characteristic of biological tissues.

Viscoelastic modeling may provide a more physiologically accurate representation by incorporating both elastic and viscous …