Biomedical Engineering and Bioengineering Commons^™

A Novel Brain Computer Interface Design, Steven Vogan

Senior Honors Theses

A brain computer interface (BCI) is a system which connects neural signals to a computer system. They have been used for controlling systems including robotics, on-screen computer control such as mouse movement, typing, and synthesizing audio signals. Invasive, or implanted, systems are often long-term medical solutions, or used for research where very clear signal is required. Non-invasive systems usually rely on exterior signals gathered through a headset using one or more electrode sensors. These signals are composed of sums of neuron activation potentials from brain activity and can be used to determine particular aspects of brain function. All BCIs rely …

Evalattai: A Holistic Approach To Evaluating Attribution Maps In Robust And Non-Robust Models, Ian E. Nielsen, Ravi Ramachandran, Nidhal Carla Bouaynaya, Hassan M. Fathallah-Shaykh, Ghulam Rasool

Henry M. Rowan College of Engineering Departmental Research

Eyes are one of the main critical organs of the body that provide our brain with the most information about the surrounding environment. Disturbance in the activity of this informational organ, resulting from different ocular diseases, could affect the quality of life, so finding appropriate methods for treating ocular disease has attracted lots of attention. This is especially due to the ineffectiveness of the conventional therapeutic method to deliver drugs into the interior parts of the eye, and the also presence of barriers such as tear film, blood-ocular, and blood-retina barriers. Recently, some novel techniques, such as different types of …

Design Of Asic Based Electrical Impedance Tomography Microendoscopic System For Prostate Cancer Surgical Marginal Assessment, Mohsen Shahghasemi

Dartmouth College Ph.D Dissertations

Prostate cancer is the second most common cancer in the United States. It is typically treated by surgically excising the cancerous section of the prostate. Because there is not always a visible distinction between the healthy and cancerous sections, surgery often leaves some cancerous tissue behind. This is referred to as a positive surgical margin and it requires adjuvant treatment with adverse side effects. Electrical impedance tomography (EIT) is a low-cost low-form-factor method that can be used to assess surgical marginal intraoperatively to ensure that no cancerous tissue is left behind. EIT-based surgical margin assessment works on the principle that …

List Of 121 Papers Citing One Or More Skin Lesion Image Datasets, Neda Alipour

Other resources

No abstract provided.

Characterization And Estimation Of Musculoskeletal Pain Using Machine Learning, Boluwatife Faremi

Master's Theses

Traditional scales utilized for recording pain are known to be highly subjective and biased due to inaccuracies in recollecting actual pain intensities. As a result, machine learning (ML) models that are trained using these scores as ground truth are reported to have low performance for objective pain classification because of the huge disparity between what was felt in moments of pain and the scores recorded afterward.

In the present study, two devices were designed for gathering real-time, continuous in-session subjective pain scores and the recording of the autonomic nervous system (ANS) altered endodermal (EDA) activity. 24 participants were recruited to …

Neurocomputing And Interfacing Digital Tasting System: Research, Design, And Evaluation, Amira J. Zaylaa, Ahmad El Hajj

BAU Journal - Science and Technology

The continuous evolution in computing and interfacing has been extended to develop multi-sensory experiences in many domains such as neurological, auditory, vision, and haptic domains. So far, only a few remarkable system approaches have been approved to be serving the taste sensation digitally. Although taste sensation is linked to the brain, there is a lack of optimal neurocomputing digital taste sensation systems. Our study provides a new neurocomputing method to digitally stimulate the sense of taste by electrical stimulation on the human tongue. We aim to link chemical stimulation and electrical stimulation in order to design an electronic interface for …

Motion-Resistant Pulse Oximetry, Ludvik Alkhoury

Dissertations

The measurement of vital signs ? such as peripheral capillary oxygen saturation (SpO₂) and heart rate (HR) levels ? by a pulse oximeter is studied. The pulse oximeter is a non-invasive device that measures photoplethysmography (PPG) signals and extracts vital signs from them. However, the quality of the PPG signal measured by oximetry sensors is known to deteriorate in the presence of substantial human and sensor movements contributing to the measurement noise. Methods to suppress such noise from PPG signals measured by an oximeter and to calculate the associated vital signs with high accuracy even when the wearer …

Piezoelectric And Conductive Polymer Based Flexible Devices Enabling Cardiovascular Health Sensing And Energy Harvesting, Andrew Closson

Dartmouth College Ph.D Dissertations

Piezoelectric materials show great promise for low-power wearable and implantable sensing, but their rigidity makes it challenging to integrate them with biological tissue. To address this, researchers have started exploring polymer-based functional materials that offer flexibility and are suitable for interfacing with the human body. However, these materials are still in their early stages, and a framework is necessary to illustrate how these materials, in conjunction with novel fabrication techniques and device designs, can enable the development of multi-functional sensing and energy harvesting devices.

This thesis utilizes highly scalable fabrication methods for functional polymers to build and test a flexible …

The Future Is Now In Twisted Coil Polymer Actuators (Tcpa), Ryan Ronquillo

Electronic Theses and Dissertations

This thesis aimed to fabricate and test twisted coiled polymer actuators (TCPA) to understand the mechanical and thermal aspects of this artificial muscle fiber. The purpose of this thesis was to find a linear relationship using the LVDT sensor, fabricating TCPA fibers, and interpreting the data. The project tested whether nylon/polymer could be used as a better artificial muscle fiber.

This research accomplished three goals: (1) designing and fabricating a system capable of creating supercoiled muscle fibers consistently, (2) calibrating the Linear Variable Differential Transformer (LVDT) and Core, and (3) analyzing/interpreting the data of the Twisted Coiled Polymer Actuators (TCPA) …

Rattus Norvegicus As A Biological Detector Of Clandestine Remains And The Use Of Ultrasonic Vocalizations As A Locating Mechanism, Gabrielle M. Johnston

Master's Theses

In investigations, locating missing persons and clandestine remains are imperative. One way that first responder and police agencies can search for the remains is by using cadaver dogs as biological detectors. Cadaver dogs are typically used due to their olfactory sensitivity and ability to detect low concentrations of volatile organic compounds produced by biological remains. Cadaver dogs are typically chosen for their stamina, agility, and olfactory sensitivity. However, what is not taken into account often is the size of the animal and the expense of maintaining and training the animal. Cadaver dogs are typically large breeds that cannot fit in …

Trace Dna Detection Using Diamond Dye: A Recovery Technique To Yield More Dna, Leah Davis

Master's Theses

This study aspires to find a new screening approach to trace DNA recovery techniques to yield a higher quantity of trace DNA from larger items of evidence. It takes the path of visualizing trace DNA on items of evidence with potential DNA so analysts can swab a more localized area rather than attempting to recover trace DNA through the general swabbing technique currently used for trace DNA recovery. The first and second parts consisted of observing trace DNA interaction with Diamond Dye on porous and non-porous surfaces.

The third part involved applying the Diamond Dye solution by spraying it onto …

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

Development Of Medical Device For Volume Status Assessment Using Peripheral Venous Pressure, Audra Beneux

Graduate Theses and Dissertations

The severe side effects of acute dehydration and blood loss may be prevented if assessed and treated quickly. As amplifier technology has improved, small peripheral venous pressure (PVP) signals collected using a transducer on an intravenous catheter can be analyzed to monitor patient volume status. This thesis details the development of an embedded system prototype that quickly and accurately assesses volume status using PVP analysis. The volume prediction algorithm classified 10 seconds of PVP data as “dehydrated” or “resuscitated”. The hardware design consisted of four primary areas: analog signal conditioning, processing, user interaction, and power. After data collection, the signal …

Development Of A Fish Robot Equipped With Novel 3d-Printed Soft Bending Actuators, Steven Steele, Jorge Diaz Rodriguez, Sharun Sripathy, Turaj Ashuri, Saleh Gharaie, Yusun Chang, Amir Ali Amiri Moghadam

Symposium of Student Scholars

This paper reports on design and fabrication of a novel soft fish robot. Application of soft actuators for the fish tail will generates continuum bending motion which resembles the natural motion of the fish. However, most soft actuator mechanisms are complex and have low efficiency. Thus, to address this issue we have developed a 3D printed soft bending actuator which can be actuated with an electromotor. The basic design idea of the soft bending actuator is explained, and iteration of the design showed to create the desired motion for the soft tail. The soft actuator has been successfully integrated with …

Portable Diffuse Reflectance Spectroscopy For Non-Invasive And Quantitative Assessment Of The Parathyroid Glands Viability During Surgery, Mark Romine, Linh Luong, Alex Moazzen, Katie Cho, Paul Lee

Symposium of Student Scholars

Portable Diffuse Reflectance Spectroscopy for Non-invasive and Quantitative Assessment of the Parathyroid Glands Viability During Surgery

Mark Romine, Linh Luong, Alex Moazzen, Katie Cho and Paul Lee

The parathyroid glands (PTGs) are responsible for the regulation of calcium levels in the blood by secreting a parathyroid hormone. This parathyroid hormone then regulates the body’s absorption, storage, and secretion of calcium, which can directly affect the way muscles and nerves operate. PTGs are often at risk of damage, or accidental removal during thyroid surgeries, because it is challenging to identify PTGs and to determine their viability. Current methods of visual inspections …

Wireless, Handheld Diffuse Reflectance Spectroscopy To Quantify Tissue Microvascular Hemodynamics, Linh Luong, Alex Moazzen, Mark Romine, Katie Cho, Paul Lee

Symposium of Student Scholars

Diffuse Reflectance Spectroscopy (DRS) is a non-invasive optical method to characterize tissue optical properties for disease diagnosis and health monitoring. Two optical fibers are often used in a DRS system: one to deliver light to the tissue and the other to gather diffuse reflectance spectra, which provide quantitative details about the structure and composition of the tissue. The conventional DRS system, however, is expensive, bulky, and composed of fragile optical fibers and multiple electrical connections. Here we propose to build a wireless, handheld, and fiber-less diffuse optical spectroscopy system. Unfortunately, the diffusion approximation utilized for data analysis of the conventional …

Counterventions: A Reparative Reflection On Interventionist Hci, Rua Mae Williams, Louanne E. Boyd, Juan E. Gilbert

Engineering Faculty Articles and Research

Research in HCI applied to clinical interventions relies on normative assumptions about which bodies and minds are healthy, valuable, and desirable. To disrupt this normalizing drive in HCI, we define a “counterventional approach” to intervention technology design informed by critical scholarship and community perspectives. This approach is meant to unsettle normative assumptions of intervention as urgent, necessary, and curative. We begin with a historical overview of intervention in HCI and its critics. Then, through reparative readings of past HCI projects in autism intervention, we illustrate the emergent principles of a counterventional approach and how it may manifest research outcomes that …

Beirut Arab University - Faculty Of Engineering - Newsletter Issue 0, Faculty Of Engineering, Beirut Arab University

Engineering Newsletters

No abstract provided.

Computational Design Of Fiber-Optic Probes For Biosensing, Suwarna Karna

Electrical Engineering Theses

This thesis presents a study on the optical characteristics of hollow-core photonic crystal fibers (HC-PCFs) with a band gap cladding structure and their applications in optical fiber sensing. This 800B HC-PCF exhibited excellent optical properties and has a flexible structure, which makes them suitable for a wide range of industrial applications. Finite element simulations and structural optimization designs were conducted using the surface plasmon resonance (SPR) technique to determine the optimal performance parameters of the 800B HC-PCF. The fiber was further modified using the SPR technique to improve its practical detection capabilities. The performance of the modified fiber was observed …

Neurogen: Eeg And Near-Infrared Light Stimulation Control System, Arnold Nieto, Jaylinn Solis, Matthew Tamanaha

Interdisciplinary Design Senior Theses

Light stimulation or transcranial photobiomodulation (tPBM) therapy has been shown to be effective when treating patients suffering neurodegenerative diseases such as Alzheimer’s and Parkinson’s disease. While there is currently no cure, light stimulation can help alleviate symptoms for those patient’s suffering from these diseases. With this in mind, the senior design team from last year began a prototype hybrid electroencephalography (EEG) and tPBM device. They implemented a specific wavelength of 810 nanometer (nm) near-infrared (NIR) light emitting diodes (LEDs), with a 16 channel EEG headset from OpenBCI. The device was intended to serve as a potential research tool, with a …

Development And Implementation Of Telemetry Devices To Identify And Characterize Sources Of Intraocular Pressure Variability In Rats, Christina M. Nicou

USF Tampa Graduate Theses and Dissertations

Eye health depends partially on intraocular pressure (IOP) as abnormal levels can lead to ocular tissue damage. Glaucoma is a neurodegenerative disease that affects nearly 80 million people worldwide [1]. It is associated with elevated IOP, which can lead to irreversible blindness. Relatively little is known about IOP dynamics and the physiological factors that affect it as IOP is typically monitored using tonometry. Tonometry is a common tool used by clinicians and researchers to measure IOP noninvasively. It provides a good estimate of IOP mean but not variance because data collection takes time. Readings can also be influenced by subject …

Remote Medical Diagnosis Via Infrared Thermography And Augmented Reality, Frederick M. Selkey

USF Tampa Graduate Theses and Dissertations

Fast, accurate, and non-invasive diagnostic techniques are required by the medical industry to increase the success of medical treatments and enhance the quality of patient care. Medical IRT has been demonstrated reasonably effective at diagnosing and monitoring several physiological conditions. Diversities in the human body, physical and psychological condition, measurement equipment, and environment all influence the sensitive readings obtained by passive IR measurement devices. New standards for medical IRT and fever screening have been demonstrated effective, but there is limited adherence to the guidelines [36]. Absolute temperature readings require regular calibration checks and can easily be thrown off by noise. …

Efficient Scopeformer: Towards Scalable And Rich Feature Extraction For Intracranial Hemorrhage Detection Using Hybrid Convolution And Vision Transformer Networks, Yassine Barhoumi

Theses and Dissertations

The field of medical imaging has seen significant advancements through the use of artificial intelligence (AI) techniques. The success of deep learning models in this area has led to the need for further research. This study aims to explore the use of various deep learning algorithms and emerging modeling techniques to improve training paradigms in medical imaging. Convolutional neural networks (CNNs) are the go-to architecture for computer vision problems, but they have limitations in mapping long-term dependencies within images. To address these limitations, the study explores the use of techniques such as global average pooling and self-attention mechanisms. Additionally, the …

Molecular And Cellular Level Characterization Of Cytoskeletal Mechanics Using A Quartz Crystal Microbalance, Emily M. Kerivan, Lyle Tobin, Mihir Basil, Dana N. Reinemann

Faculty and Student Publications

A quartz crystal microbalance (QCM) is an instrument that has the ability to measure nanogram-level changes in mass on a quartz sensor and is traditionally used to probe surface interactions and assembly kinetics of synthetic systems. The addition of dissipation monitoring (QCM-D) facilitates the study of viscoelastic systems, such as those relevant to molecular and cellular mechanics. Due to real-time recording of frequency and dissipation changes and single protein-level precision, the QCM-D is effective in interrogating the viscoelastic properties of cell surfaces and in vitro cellular components. However, few studies focus on the application of this instrument to cytoskeletal systems, …

Split And Join: An Efficient Approach For Simulating Stapled Intestinal Anastomosis In Virtual Reality, Di Qi, Suvranu De

Engineering Faculty Articles and Research

Colorectal cancer is a life-threatening disease. It is the second leading cause of cancer-related deaths in the United States. Stapled anastomosis is a rapid treatment for colorectal cancer and other intestinal diseases and has become an integral part of routine surgical practice. However, to the best of our knowledge, there is no existing work simulating intestinal anastomosis that often involves sophisticated soft tissue manipulations such as cutting and stitching. In this paper, for the first time, we propose a novel split and join approach to simulate a side-to-side stapled intestinal anastomosis in virtual reality. We mimic the intestine model using …

An Epileptic Seizure Detection Method From Eeg Signals Based On A Classifier-Driven Feature Reduction Technique, Raymond N. Kamel

Theses and Dissertations

Epileptic seizure detection can improve the quality of life of epileptic patients, allow for more accurate medication, and minimize the risk of sudden unexpected death in epilepsy (SUDEP). This thesis work aims to develop a robust and stable algorithm for epileptic seizure detection through the classification of EEG signals. To achieve this aim, a methodology is proposed to develop a classifier that can differentiate between the healthy (normal), interictal, and ictal states of EEG signals, while maximizing the classification accuracy and minimizing the computational redundancy. The main pillar upon which this methodology is designed is using a problem-specific classifier-driven feature …

Electromagnetic Theory And Applications, Nicholas Madamopoulos, George Kliros

Open Educational Resources

This book intends to provide both the fundamentals of Electromagnetics but also some practical applications of the concepts covered. Having taught electromagnetics for several years, the authors feel that many times the field of electromagnetics comes as “old” and often times students do not appreciate the concepts and their importance in everyday applications. The authors intend to accompany the EM concepts with life applications. Hence, students may see the direct impact of the knowledge they acquire through the study of the field of electromagnetics and better appreciate the field.

High-Sensitivity Vector Bend Sensor Based On A Fiber Directional Coupler Inscribed By A Femtosecond Laser, Ke Tian, Mingyuan Zhang, Chuanzhein Zhao, Huibin Li, Shilong Li, Yuxuan Jiang, Gerald Farrell, Pengfei Wang

Articles

In this Letter, we demonstrate a high-sensitivity vector bend sensor based on a fiber directional coupler. The fiber directional coupler is composed of two parallel waveguides inscribed within a no-core fiber (NCF) by a femtosecond laser. Since the two written waveguides have closely matched refractive indices and geometries, the transmission spectrum of the fiber directional coupler possesses periodic resonant dips. Such a fiber directional coupler exhibits a good bending-dependent spectral shift response due to its asymmetric structure. Experimental results show that bending sensitivities of -97.11 nm/m-1 and 58.22 nm/m-1 are achieved for the 0° and 180° orientations in the curvature …

A Label-Free Fiber Ring Laser Biosensor For Ultrahigh Sensitivity Detection Of Salmonella Typhimurium, Shi Qiu, Bin Liu, Yuankui Leng, Edward Fox, Xian Zhou, Binbin Yan, Xinzhu Sang, Long Long, Xingdao He, Jinhui Yuan, Gerald Farrell, Qiang Wu

Articles

The rapid detection of low concentrations of Salmonella Typhimurium (S. Typhimurium) is an essential preventive measure for food safety and prevention of foodborne illness. The study presented in this paper addresses this critical issue by proposing a single mode-tapered seven core-single mode (STSS) fiber ring laser (FRL) biosensor for S. Typhimurium detection. The experimental results show that the specific detection time of S. Typhimurium is less than 20 min and the wavelength shift can achieve -0.906 nm for an S. Typhimurium solution (10 cells/mL). Furthermore, at a lower concentration of 1 cell/mL applied to the biosensor, a result of -0.183 …

Life Cycle Assessment Of Air Classification As A Sulfur Mitigation Technology In Pine Residue Feedstocks, Ashlee Edmonson

Theses and Dissertations--Biosystems and Agricultural Engineering

Sulfur accumulation during biofuel production is pollutive, toxic to conversion catalysts, and causes the premature breakdown of processing equipment. Air classification is an effective preprocessing technology for ash and sulfur removal from biomass feedstocks. A life cycle assessment (LCA) sought to understand the environmental impacts of implementing air classification as a sulfur-mitigation technique for pine residues. Energy demand and material balance for preprocessing were simulated using SimaPro and the Argonne National Laboratory’s GREET model, specifically focusing on comparing the global warming potential (GWP) of grid electricity versus bioelectricity scenarios. Overall, the grid electricity scenario had a GWP impact over 7 …