Biomedical Engineering and Bioengineering Commons^™

Evaluating Visual Dependence In Postural Stability Using Smartphone And Stroboscopic Glasses, Brent A. Harper, Michael Shiraishi, Rahul Soangra

Physical Therapy Faculty Articles and Research

This study explores the efficacy of integrating stroboscopic glasses with smartphone-based applications to evaluate postural control, offering a cost-effective alternative to traditional forceplate technology. Athletes, particularly those with visual and visuo-oculomotor enhancements due to sports, often suffer from injuries that necessitate reliance on visual inputs for balance—conditions that can be simulated and studied using visual perturbation methods such as stroboscopic glasses. These glasses intermittently occlude vision, mimicking visual impairments that are crucial in assessing dependency on visual information for postural stability. Participants performed these tasks under three visual conditions: full vision, partial vision occlusion via stroboscopic glasses, and no vision …

Smart Cushion Device For Elderly Aging In Place, Anna Dion, Nate Colley, Leonardo Bravo

Biomedical Engineering

Our task at hand is to develop a consumer-focused solution for improving elder care to provide additional peace of mind for seniors and caregivers using technology to extend independent living. We intend to create a device that will improve the quality of life of elderly individuals living alone by encouraging periodical movement throughout the day, along with monitoring pressure distribution and alerting when pressure concentration is potentially harmful. It will also alert users to the presence of moisture which can arise from spills or incontinence. The key stakeholders of this project include elderly adults over the age of 65 who …

Prosthetic Forearm Controller, Claire Tylutki, Kevin Lopatka, Sofia Zaletel, Hardit Singh

Electrical Engineering

The EMG controlled prosthetic arm project represents a significant advancement in upper limb prosthetics, leveraging cutting-edge technology to address critical user needs. With over two million individuals in the United States living with limb loss, a substantial portion being upper limb amputees, the demand for accessible and functional prosthetic solutions is pressing. This project focuses largely on refining prosthetic limb control through the integration of electromyography (EMG) signal processing and control. Using surface electrodes, this project employs non-invasive means of data collection combined with modern digital signal processing methods to implement faster and more accurate control. The control system also …

2-Channel Eeg Neurofeedback System, Tim Erwin, Donna Nikjou, Sebastian Turkewitz

Electrical Engineering

This work describes the design of an EEG-based neurofeedback system which provides users with real-time feedback on their level of focus or relaxation. By analyzing the spectral content of the brain activity measured via scalp electrodes, focus and relaxation levels can be quantified. Based on these measurements, live feedback in the form of moving bar graphs is provided to users, allowing them to gain awareness of their mental-state and more efficiently learn how to consciously relax or focus. This project covers the design of the system, including amplification and filtering stages, digitization, and signal processing. The system interfaces with a …

Computational Microscopy For Biomedical Imaging With Deep Learning Assisted Image Analysis, Yuwei Liu

Dissertations

Microscopy plays a crucial role across various scientific fields by enabling structural and functional imaging with microscopic resolution. In biomedicine, microscopy contributes to basic research and clinical diagnosis. Conventionally, optical microscopy derives its contrast from the amplitude of the optical wave and provides visualization of the physical structure of the sample qualitatively. To understand the function at the cellular or tissue level, there is a need to characterize the sample quantitatively and explore contrast mechanisms other than light intensity. Image enhancement or reconstruction from microscopic imaging systems is known as computational microscopy, and it involves the application of computational techniques …

Robust Ai-Driven Segmentation Of Glioblastoma T1c And Flair Mri Series And The Low Variability Of The Mrimath© Smart Manual Contouring Platform, Yassine Barhoumi, Abdul Hamid Fattah, Nidhal Carla Bouaynaya, Fanny Moron, Jinsuh Kim, Hassan M. Fathallah-Shaykh, Rouba A. Chahine, Houman Sotoudeh

Henry M. Rowan College of Engineering Departmental Research

Patients diagnosed with glioblastoma multiforme (GBM) continue to face a dire prognosis. Developing accurate and efficient contouring methods is crucial, as they can significantly advance both clinical practice and research. This study evaluates the AI models developed by MRIMath© for GBM T1c and fluid attenuation inversion recovery (FLAIR) images by comparing their contours to those of three neuro-radiologists using a smart manual contouring platform. The mean overall Sørensen–Dice Similarity Coefficient metric score (DSC) for the post-contrast T1 (T1c) AI was 95%, with a 95% confidence interval (CI) of 93% to 96%, closely aligning with the radiologists’ scores. For true positive …

Regular Algorythms For Synthesis Of Optimal Control Systems For Dynamic Objects, Igamberdiyev Husan, Uktam Farkhodovich Mamirov, Xankeldiyeva Zebiniso

Technical science and innovation

The article presents algorithms for the synthesis of an optimal control system for dynamic objects. As a model, we consider a differential equation of a continuous one-dimensional system in the form of a state space, which has the properties of controllability and observability. The paper shows the need to use an observation device in order to assess how the properties of the controlled system change with the slightest change in the parameters of the control object, to assess the sensitivity of the system to these changes. When finding a solution to the equation formulated to find the parameters of the …

Studying The Production Of Nanocelluloses, Shohzodbek Abduvahobovich Rashidov, Elmurod Abduqodirovich Egamberdiev, Sadritdin Maxamatdinovich Turabdjanov

Technical science and innovation

Nanoscience is a broad field that includes nanophysics and nanochemistry. Nanotechnologies are aimed at obtaining nanoparticles with new properties and creating materials and devices based on them. This is one of the modern trends in the development of science in the 21st century.

Based on the study of information about nano-sized materials, the mechanisms of their production and changes in their properties, we will consider the technology for producing nanocellulose from organic substances, i.e. from cellulose. The article describes a technology that examines devices for producing nanocellulose and the principles of their operation, as well as a combined method of …

Comparative Analysis Of Cutting Forces In Axial-Compliant And Rigid Chamfering Tools, Sultonmurod Bekpulatovich Normatov, Oybek Tuyboyov, Azimjon Axror O'G'Li Pardayev, Alisher G‘Ayratjon Ogli Boratov, Shohjahon Tuxtasin Ogli Abdullayev

Technical science and innovation

This study delves into the analysis of cutting forces in axial-compliant systems, focusing specifically on the comparison between axially spring-compensated 90° conical tools and rigid chamfering tools. The research incorporates a predictive model for chamfer size calculation in the axially spring-compensated tools, verified through experimental tests on representative parts. The study aims to control chamfer size within tolerances by adjusting process conditions and optimizing processing efficiency. By exploring the fundamentals of the chamfering process, this research offers insights into breaking sharp edges on components with positional errors and shape deformations, with a particular emphasis on aero-engine casings. The integration of …

Database And Machine Learning Model For Classifying Autism Spectrum Disorder From Smartphone Based Electroretinography, Rory Harris

Honors Scholar Theses

Autism Spectrum Disorder (ASD) is a neurodevelopmental disorder that negatively affects a patient’s cognitive and communication aptitude and, therefore, can severely impact that patient’s quality of life. Because of this, early diagnosis is paramount. In recent studies, electroretinography (ERG), which is a measure of the retina’s electrical response to a brief flash of light into the eye, has shown promise in detecting ASD. Access to these scans can provide early diagnosis, improving well-being. Current ERG devices are very expensive due to their on board processing capabilities. This paper aims to create an ERG device using a smartphone as the main …

Characterizing The Molecular And Cellular Changes Of Senescent Cells Induced By Diverse Stressors In 2d And 3d Microenvironments, Apoorva Chauhan

UNLV Theses, Dissertations, Professional Papers, and Capstones

Aging is a risk factor for myriad diseases and is often associated with the accumulation of senescent cells. Cellular senescence, a process of irreversible cell cycle arrest, is associated with various changes in cellular morphology and function. While senescence will occur naturally in a time-dependent manner, it can be prematurely induced by various extrinsic and intrinsic factors. Most senescence studies model cell behavior in two-dimensional (2D) microenvironments; however, these models are not physiologically relevant. In this study, the effects of naturally occurring reactive oxygen species (ROS) hydrogen peroxide (H2O2) and commonly used chemotherapy drugs, doxorubicin and palbociclib, on cellular senescence …

Hand Movement Analysis For Surgical Suturing Skill Assessment, Amir Mehdi Shayan

All Theses

To enhance patient safety, surgical education is increasingly incorporating simulation for formative skills assessment and training. However, many standardized assessment tools rely on human raters for performance assessment, which is resource-intensive and subjective. Simulators that provide automated and objective metrics from sensor data can address this limitation. This thesis presents an instrumented bench suturing simulator, patterned after the Clock Face (CF) radial suturing model from the Fundamentals of Vascular Surgery (FVS), for automated and objective assessment of open suturing skills by particularly focusing on biomechanical analysis of hand movements. For this research, 97 participants (35 attending surgeons and fellows, 32 …

Spectrophotometric Device For Early Malaria Detection, Adrian Wasylewski, Christopher Faber, Victor Lin

Honors Thesis

Malaria remains a significant global health challenge, with millions of cases reported annually, particularly in resource-limited regions. Timely and accurate diagnosis is crucial for effective treatment and disease management. Unfortunately, there are still significant challenges in existing testing procedures, which are often expensive, inaccurate, or impractical for mass testing. While spectrophotometry has been proposed as a detection tool for other tropical diseases such as dengue fever, no prototype has been made for any disease, including malaria. This report addresses this gap by presenting a spectrophotometric-based malaria detection tool that achieves high sensitivity at a low cost. The inclusion of a …

Reducing Glass Loss During Transportation And Storage, Abdulaziz Muzafarovich Qurbanov, Mirzaabdullayev Jaxongir Baxtiyorovich

Technical science and innovation

The article discusses the processes of transportation and storage of sheet glass in the production of protective glass for cars. The experience of organizing the transportation and storage of glass in developed countries of the world was analyzed in order to study the problems of losses of raw materials during the transportation and storage of laminated glass, as well as to develop and approve a regulatory and technical document. in this field. The supplies of various brands of polished laminated glass used in the production of protective glass for cars to Avtooina LLC from different addresses, from different manufacturers were …

Low Impedance, Durable, Self-Adhesive Hydrogel Epidermal Electrodes For Electrophysiology Recording, Naiyan Wu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Traditional electrodes used for electrophysiology recording, characterized by their hard, dry, and inanimate nature, are fundamentally mismatched with the soft, moist, and bioactive characteristics of biological tissues, leading to suboptimal skin-electrode interfaces. Hydrogel materials, mirroring the high water content and biocompatibility of biological tissues, emerge as promising candidates for epidermal electronic materials due to their adjustable physicochemical properties. However, challenges such as inadequate electrical conductivity, elevated skin impedance, unreliable adhesion in moist conditions, and performance decline from dehydration have significantly restricted the efficacy and applicability of hydrogel-based electrodes. In this thesis, we report a high-performance hydrogel epidermal electrode patch for …

Advancing Brain Tumor Segmentation With Spectral–Spatial Graph Neural Networks, Sina Mohammadi, Mohamed Allali

Engineering Faculty Articles and Research

In the field of brain tumor segmentation, accurately capturing the complexities of tumor sub-regions poses significant challenges. Traditional segmentation methods usually fail to accurately segment tumor subregions. This research introduces a novel solution employing Graph Neural Networks (GNNs), enriched with spectral and spatial insight. In the supervoxel creation phase, we explored methods like VCCS, SLIC, Watershed, Meanshift, and Felzenszwalb–Huttenlocher, evaluating their performance based on homogeneity, moment of inertia, and uniformity in shape and size. After creating supervoxels, we represented 3D MRI images as a graph structure. In this study, we combined Spatial and Spectral GNNs to capture both local and …

Ferroresonance In Three-Phase Electrical Networks, Shavkat Ernstovich Begmatov

Technical science and innovation

Possible modes of ferroresonance in three-phase electric networks and analysis of substitution schemes where ferroresonance voltage increase is observed are considered. The most complete magnetization curve of the transformer core and the analysis of the generalized equivalent substitution scheme are presented, as a result of which more accurate formulas for determining the values of equivalent parameters of the electrical network and voltage transformer in ferroresonance mode are obtained. Factor of ferroresonance voltage increase is introduced, which determines ratio between amplitude values of transformer phase voltage and mains voltage. The method of determination of boundary conditions of steady ferroresonance voltage increase …

Main Prospects Of Natural Gas Purification Technologies From Acidic Compounds, Oybek Yusupdjanovich Aripdjanov, Diyora Zokhid Qizi Khayrullaeva, Jonibek Avazek Ogli Abdumuminov

Technical science and innovation

The article discusses the main prospects for the technology of purifying natural gas from acidic components and the problems of ensuring the purity of oil and gas products in accordance with state standards. An increase in the degree of purification from H₂S, CO₂, elemental sulfur, carbonyl sulfide, ethyl mercaptans (thiols), methyl mercaptan, carbon disulfide, sulfides, disulfides (dithioethers), thiophene, sulfoxides and sulfones is considered. Also, the physicochemical properties of the absorbent for the purification of sulfur compounds (generated during natural gas processing) are studied. Based on the study of various absorbents (ethanolamine (EA), methylethanolamine (MEA), diethanolamine (DEA), …

Modelling Of Heat Transfer In An Air Solar Collector, Shakhnoza Abduvaxitovna Sultanova, Jasur Esirgapovich Safarov, A.A. Mambetsheripova

Technical science and innovation

This study is the prediction, depending on time and different geographical and climatic situations, of different operating parameters: solar radiation, ambient and outlet coolant temperature, heat exchange coefficients and losses. All these determine, in the absence of measurements, the efficiency of the system modelled with existing models with respect to these parameters. These models are usually compared with experimental results. Before modelling, it is necessary to investigate the different heat transfer and exchange regimes that exist between the different elements of this system in order to eventually have a system of equations governing this exchange. The modelling principle is to …

Quantitative Assessment And Characterization Of Tool Wear Phenomena In Advanced Manufacturing Processes, Oybek Valijonovich Tuyboyov

Technical science and innovation

This paper explores the quantitative assessment and characterization of tool wear phenomena in advanced manufacturing processes, employing a multifaceted approach encompassing traditional measurements, image processing, machine learning, and predictive modeling. The study emphasizes the intricate dynamics of tool wear and its direct impact on cutting tool performance, addressing challenges in real-time monitoring and optimization of machining operations. Traditional methods like VBmax measurement are juxtaposed with advanced techniques such as the improved conditional generative adversarial net with a high-quality optimization algorithm (CGAN-HQOA), efficient channel attention destruction and construction learning (ECADCL), and shape descriptors based on contour, moments, orientations, and texture. Artificial …

Selective Oxidation Of Iron In Chalcopyrite For Enhanced Copper Recovery, Khojiakbar Shuxrat O'G'Li Sultonov, Shokhrukh Toshpulatovich Khojiev, Gulnoza Berdiyor Qizi Beknazarova, Malika Sayfullayevna Saidova

Technical science and innovation

This study explores the thermodynamic feasibility of selectively oxidizing iron contained in chalcopyrite mineral while preventing the oxidation of copper sulphide, with the ultimate goal of enhancing the copper concentration in the sulphide concentrate. A redox reaction in the solid phases between chalcopyrite and copper (I) oxide was constructed and subjected to thermodynamic analysis. The research identifies a crucial temperature range of 498-598 K (225-325 °C) as the most favourable for the redox reaction. The equilibrium constants at the selected optimal temperatures, 1.152 for chalcopyrite and 1.137 for copper (I) oxide, indicate that the redox reaction adheres to the expected …

Solving Water Resources Problems - Water Saving In The Republic Of Uzbekistan, Rustam Muxammatdjanovich Raximov

Technical science and innovation

In this article we will talk about the problems of water resources in the Republic of Uzbekistan. The problem of drinking water supply, solutions to provide drinking water to the population of Uzbekistan. The largest consumers of fresh water in Uzbekistan are farmers. Due to outdated infrastructure, 40% of water is wasted. Rising food prices and the risk of spreading disease are the first signs of water shortages that we may experience in the coming еars. Uzbekcosmos told how to solve the problem. Water is an invaluable resource used not only in the home, but also in the production and …

Theory Of Development And Improvement Of The Mathematical Model Of The Methodology Of Public Control In The Management Of Occupational Safety And Industrial Risks, Aliakbar Khamidullaevich Rasulev, Sunnatilla Suleymanovich Suleymanov, Nodira Bakhadirzhanovna Gaibnazarova

Technical science and innovation

The article develops and analyzes a mathematical model based on a logical flowchart of the methodology of public control in the management of occupational safety and industrial risks and probability theory, according to the model, the results of compliance with the requirements of social cooperation on occupational safety lead to a sharp increase in the probability of reliability, management efficiency becomes higher. Analysis of the mathematical model of the developed logical flowchart based on probability theory has shown that when the parties cooperate to monitor the results of compliance with labor protection requirements, they lead to a sharp increase in …

Implementing A Solar Photovoltaic Station In Watering Systems Utilizing Complex Software, Akbarxon Sarvar O'G'Li Uroqov, Faxriddin Jaylovovich Nosirov, G'Olibjon Pardayevich Arzikulov, Zarina Amriddin Qizi Sayfutdinova

Technical science and innovation

This article explores the benefits of transitioning from traditional agricultural irrigation systems to more cost-effective alternatives powered by renewable energy sources. By integrating solar photovoltaic technology into irrigation processes, significant reductions in resource wastage, estimated at 45-50%, are achievable through the implementation of drip irrigation techniques. This results in enhanced agricultural productivity. Moreover, the utilization of solar panels in green zones mitigates surface temperature increases, contributing to a 2-5% boost in electricity production. Currently, irrigation facilities primarily rely on the main energy grid. However, transitioning to renewable energy sources decreases reliance on non-renewable fuels, reduces greenhouse gas emissions, and fosters …

Research Of The Influence Of Dust On Photovoltaic Modules, Anvarjon Mirolimov, Xalmurat Iliev

Technical science and innovation

The influence of dust concentrations on the current-voltage characteristics (voltampere characteristics) of photovoltaic modules (PVM) based on crystalline silicon in laboratory conditions. It was investigated how an uncleaned panel affects the output power. The tests were carried out in the city of Tashkent on the territory of the “National Research Institute of Renewable Energy Sources”. The objects were located co-plurally as specified in GOST R 60904-1 Photoelectric devices. Part 1. Measurement of current-voltage characteristics. Measurements of a cleaned photovoltaic module with a maximum power of 330 W and not a cleaned one of 236 W were obtained. Based on the …

Use Of Mathematical Skills For Technical Condition Assessment Of Power Autotransformers, Dilafruz Rustamjon Qizi Abdullabekova, Nurali Berdiyorovich Pirmatov

Technical science and innovation

In this paper, we review innovative approaches to assess the technical condition of autotransformers using mathematical methods. The main purpose of these methods is to increase the efficiency of diagnostics and prevent possible failures in power systems. The developed mathematical expression is based on complex data analysis, application of statistical methods and machine learning technologies. This makes it possible to achieve more accurate and earlier detection of potential problems. As a result of these innovative approaches, the possibilities for early detection and prevention of faults are significantly increased. This is important for ensuring the smooth operation of power systems and …

A Study On The Influence Of Cutting Parameters On Surface Roughness And Visualization Through Contour Plots And 3d Surface Profiles, Zayniddin Nosirovich Muxiddinov

Technical science and innovation

This research investigates the intricate relationship between cutting parameterscutting speed, feed rate, and depth of cut and surface roughness in machining processes. Surface roughness is a key determinant of machined surface quality, and optimizing cutting parameters is crucial for achieving superior finishes. Employing advanced visualization techniques, including contour plots and 3D surface profiles, the study offers a comprehensive exploration of surface topography dynamics. Statistical analyses and regression modeling enhance the quantitative understanding of how cutting parameters interact to shape surface roughness. The research affirms the significant influence of cutting speed, feed rate, and depth of cut, providing practical insights for …

Towards A Wearable Device For Measuring Impedance Plethysmography Of The Radial Artery, Pritom Chowdhury

Dartmouth College Master’s Theses

Recent advancements in bioimpedance technology have demonstrated significant promise in the application of cardiac health monitoring. This research explores the design and development of a forearm-based wearable bioimpedance device for non-invasive measurement of heart rate and respiratory rate at an accuracy level comparable to medical-grade monitors. It utilizes a tetrapolar electrode configuration to analyze bioimpedance changes in the radial artery due to blood flow.

An ongoing aspect of this work involves the preliminary development of an embedded framework intended to integrate signal generation, acquisition, and processing within the device to achieve compact and efficient system design, anticipated to contribute to …

Toward Electrical Impedance Sensing Surgical Drill For Tissue Boundary Detection, Harshavardhan Devaraj

Dartmouth College Ph.D Dissertations

Dental implantation is an increasingly common procedure used to treat missing teeth. However, surgical drilling to place the implant poses a high risk of injury to critical anatomy, such as inferior alveolar nerve injury or maxillary sinus perforation. A real-time surgical feedback system sensing proximity of these critical anatomy could reduce injury risks. This dissertation investigates the development of such a system that incorporates an electrical impedance sensor into the tip of a surgical drill.

A simulation framework based on finite element method (FEM) was developed to optimize the sensor as it approached a high impedance boundary. The accuracy of …

Resolving The Nanoscale Structure Of Β-Sheet Peptide Self-Assemblies Using Single-Molecule Orientation–Localization Microscopy, Weiyan Zhou, Conor L. O'Neill, Tianben Ding, Oumeng Zhang, Jai S. Rudra, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

Synthetic peptides that self-assemble into cross-β fibrils are versatile building blocks for engineered biomaterials due to their modularity and biocompatibility, but their structural and morphological similarities to amyloid species have been a long-standing concern for their translation. Further, their polymorphs are difficult to characterize using spectroscopic and imaging techniques that rely on ensemble averaging to achieve high resolution. Here, we utilize Nile red (NR), an amyloidophilic fluorogenic probe, and single-molecule orientation-localization microscopy (SMOLM) to characterize fibrils formed by the designed amphipathic enantiomers KFE8^L and KFE8^D and the pathological amyloid-beta peptide Aβ42. Importantly, NR SMOLM reveals the helical (bilayer) …