Management and Operations Commons^™

Noise And Time Pressure Effects On Situation Awareness And Aviation Maintenance Tasks, Syaza R. M. Haris

Doctoral Dissertations and Master's Theses

Aircraft maintenance technicians (AMTs) working in a line maintenance work setting are very susceptible to the deafening occupational noise from the airport vicinity or the maintenance machinery itself. Compared to a base maintenance working period, a line maintenance job requires AMTs to complete a task within a short time frame. The current study's objective is to determine if different noise levels and time pressure influence AMTs' performance and situation awareness (SA). Sixteen Embry-Riddle Aeronautical University students majoring in Aviation Maintenance Science participated in a within-subject experimental design. Each participant's performance, SA level, and perceived workload were measured during maintenance tasks …

Neutralization Of Fuel Tankering Emissions For Environmental Sustainability, Marcos Café, Diogo Coutinho, Daniel Martinelli, Alex Shigihara, Fabricio Sulzbacher

Student Works

The strategy adopted had verified the impacts of Fuel Tankering by the total value assessment in the Brazilian aviation industry in 2019, recommending practical actions to compensate and neutralize damages caused on the environment.

The importance of sustainability has significantly increased over the past years.

The aviation industry has represented an important pillar helping society to meet their present needs, without compromising the environment and future generations.

The present research had as main objective to verify if the Brazilian aviation industry can neutralize the carbon emissions from Fuel Tankering, a practice of refueling more than necessary to gain financial leverage …

Adverse Weather Low-Probality Forecast Effects On Flight Fuel Planning, Fabio Castro, Diogo Umsza, David Louzada, Paulo Ricardo Lanzarini, Manoel Valente

Student Works

This project aimed to improve the efficiency of flight planning of regular airlines regarding the addition of extra fuel due to weather forecasts with low probability occurrence regarding rain and thunderstorm events (30 and 40% chances).

Recommendations:

• Expand the scope/sample of analyzed flights to include other significant strategic airports.

• Involve Operations Control Center, Air Operations Engineering, and Safety Department in future studies in order to create an effective policy for extra fuel supply (on planning and flight execution).

• Include in the study other meteorological phenomena and conditions that involve flights extra fuel supply, such as FOG, MIST, HAZE.

• Expand the …

  ---

  Go to article

Evaluating Human Factors In The Commercial Pilot-Airplane Airman Certification Standards, Alaba Gabriel Idowu

Graduate Student Works

This research aimed to identify risk management elements in the Commercial Pilot-Airplane Airman Certification Standards (ACS), and to evaluate tasks relating to or involving human factors. The investigation examined the risk management elements under each task in the Commercial Pilot-Airplane ACS and classified them under the preconditions for unsafe acts of the Human Factors Analysis Classification System (HFACS). The method of investigation was a qualitative research approach to determine the human factors element prevalent in the Commercial Pilot-Airplane ACS. Three research questions were stated: (1) Which factor under the preconditions for unsafe of HFACS has the highest number of tasks …

Fatigue And Its Management In The Aviation Industry, With Special Reference To Pilots, Rajee Olaganathan, Timothy B. Holt, Jackie Luedtke, Brent D. Bowen

Journal of Aviation Technology and Engineering

Abstract Fatigue is a significant contributing factor that reduces human ability and leads to accidents and threatens the safety of aircraft and human lives. Approximately 70% of fatal accidents that occur in commercial aviation operations are due to human factors. More specifically, crew fatigue contributes to nearly 15 to 20% of the accidents (Akerstedt, 2000). These accidents and incidents are associated with pilot fatigue because of the long duty periods, disruption of circadian rhythms, and inadequate sleep that are common among both commercial and military pilots. Though fatigue is seen in all the disciplines associated with the aviation industry, this …

Comparison Of Airline Co-Branded Credit Card Programs Via Frequent Flyer Money Saver Analysis For Full-Service U.S. Carriers, Bora Suavi Unsal

Doctoral Dissertations and Master's Theses

Although airline alliances work fairly effectively for paid flight segments, passengers who want to redeem frequent flyer miles often encounter difficulties. Sometimes airlines demand an extensive amount of air miles to book requests for award seats to not only their partner airline customers but also their own customers. Furthermore, while the airline co-branded credit card award mile earnings and redemption rates fluctuate significantly between different airlines, passengers are not well informed about which airline co-branded credit card requires the minimum amount of credit card expenditure to fly with an award ticket to their desired travel destination.

A more useful and …

Human Fatigue Predictions In Complex Aviation Crew Operational Impact Conditions, Suresh Rangan

Doctoral Dissertations

In this last decade, several regulatory frameworks across the world in all modes of transportation had brought fatigue and its risk management in operations to the forefront. Of all transportation modes air travel has been the safest means of transportation. Still as part of continuous improvement efforts, regulators are insisting the operators to adopt strong fatigue science and its foundational principles to reinforce safety risk assessment and management. Fatigue risk management is a data driven system that finds a realistic balance between safety and productivity in an organization. This work discusses the effects of mathematical modeling of fatigue and its …

Air Navigation And Covid-19: Atm Efficiency In Pandemic Crisis, Fabio Lourenco Carneiro Barbosa

Graduate Student Works

The coronavirus crisis effects on aviation in 2020 are currently well-documented. Nonetheless, the widely registered low traffic due to the crisis does not necessarily lead to increased air navigation efficiency. Thus, the present work, developed to fulfill the program outcomes for the Master of Science in Aeronautics, Air Traffic Management (ATM) specialization, aimed to investigate what was the impact of the COVID-19 crisis on air navigation efficiency in Brazil. This research question was addressed through a quantitative, nonexperimental, observational approach with two parallel branches, designed to answer two sub-questions. For the first, regarding what was the impact of the crisis …

An Investigation Of Runway Risks Using A Systems Approach, Mehnaz Hassan

Theses and Dissertations

The purpose of this study was to explore and determine if Causal Analysis Based on System Theory ( could divulge differing underlying causes in the Taxiway overflight incident of Air Canada Flight 759 at San Fran cisco International Airport, as compared to traditional investigation methods used by the National Transportation Safety Board ( Investigations tend to focus on trying to establish the probable cause of an accident or incident, and as a result, the systemic components tend to be overlooked which leads to the common underlying causes of the event left unsolved. Adopting a systems approach to assessing runway risks …

Advancing Christ: Understanding How Foreign Cultures Respond To Missionary Aviation, Aidan Van Pelt

Senior Honors Theses

After World War II, missionary aviation became a profound influence on the world of missions. The impacts of missionary aviation culture on the spread of the Gospel in foreign locations will be investigated to better understand how it influences Christianity. The effect of expediting the travel-time to remote locations is apparent, but missionary pilots have several other influences as well, such as, community development, education and discipling locals. These various cultural aspects will be explored by first defining the culture, discussing the history of missiological responses and the origin of missionary aviation, and then examining the effects of missionary aviation …

The Effects Of Carry-On Baggage On Aircraft Evacuation Efficiency, Sang-A Lee

Doctoral Dissertations and Master's Theses

The most frequent obstacle of an aircraft evacuation is the passengers carrying baggage while evacuating. Passengers who insist on taking their carry-on baggage during an emergency evacuation not only slow down the evacuation process but also act as a significant risk to the safety of other passengers. This study investigated the factors that affect passengers’ behavioral intention to evacuate with carry-on baggage and the effects of evacuating with carry-on baggage on the total evacuation time. Overall, two studies were conducted to provide an outline of the factors that affect and affected by carry-on baggage.

Study 1 used an agent-based model, …

Development Of A Safety Performance Decision-Making Tool For Flight Training Organization, Marisa D. Aguiar

Doctoral Dissertations and Master's Theses

Title 14 of the Code of Federal Regulations (CFR) Part 141 flight training organizations are actively pursuing ways to increase operational safety by introducing advanced risk assessment and decision-making techniques. The purpose of the dissertation was to create and validate a safety performance decision-making tool to transform a reactive safety model into a predictive, safety performance decision-making tool, specific to large, collegiate Title 14 CFR Part 141 flight training organizations, to increase safety and aid in operational decision-making. The validated safety decision-making tool uses what-if scenarios to assess how changes to the controllable input variables impact the overall level of …

Cost Optimization Modeling For Airport Capacity Expansion Problems In Metropolitan Areas, Woo-Jin Choi

Doctoral Dissertations and Master's Theses

The purpose of this research was to develop a cost optimization model to identify an optimal solution to expand airport capacity in metropolitan areas in consideration of demand uncertainties. The study first analyzed four airport capacity expansion cases from different regions of the world to identify possible solutions to expand airport capacity and key cost functions which are highly related to airport capacity problems. Using mixedinteger nonlinear programming (MINLP), a deterministic optimization model was developed with the inclusion of six cost functions: capital cost, operation cost, delay cost, noise cost, operation readiness, and airport transfer (ORAT) cost, and passenger access …

A Simulation Modeling The Effects Of Maintenance Personnel On Aircraft Sortie Generation, Benjamin D. Huffman

Theses and Dissertations

Commanders and wargamers lack adequate tools to quickly determine the number of mission-capable (MC) aircraft and number of achievable sorties to support wargames and exercises. Even less understood is the impact of available maintenance personnel on sortie generation. The Expected-Number-of-In-Game-Mission-capable Aircraft (ENIGMA) simulation was recently developed to calculate the number of MC aircraft and number of sorties own accounting for the number and type of aircraft, scheduled sorties, mean-time-between-failure (MTBF), and mean-time-to-repair (MTTR). ENIGMA is extended by replacing the MTTR input with functions derived from actual numbers and types of maintenance personnel available. Functions in the form of response surface …

Resilient Maintenance Infrastructure: Dynamic Repair Network Designs To Effectively Manage Supply Chain Disruptions, David W. Wallace Iii

Theses and Dissertations

Supply chains are facing numerous changes contributing to their increase in complexity and vulnerability to disruptions. Subsequently, decision-makers lack a transparent, generalizable tool to quantify supply chain resilience and assess additional resilience investments. This research facilitates a more profound understanding of the intricacies and interrelation of supply chain nodes and constructs. It integrates the Area under the Curve (AUC) metric to quantify performance or any organizational measure of competitive advantage amid a disruption. Due to its structural resemblance to various organizational platforms, the subset United States Air Force (USAF) F-16 engine repair and supply network is modeled employing discrete-event simulation. …

An Investigation Of Factors That Influence Passengers’ Intentions To Use Biometric Technologies At Airports, Kabir Olaseni Kasim

Doctoral Dissertations and Master's Theses

Biometric technologies use the characteristics and measurements from humans to establish or verify their identity. Within an airport setting, biometric technologies can be used to hasten passenger processes such as airport check-in, baggage drop-off or pick-up, and aircraft boarding, thus enhancing the overall passenger experience.

This research investigated the factors that influence passengers’ intentions to choose the use of biometrics over other methods of identification. The current study utilized a quantitative research method via an online survey of 689 persons from Amazon ® Mechanical Turk ® (MTurk) and employed structural equation modeling (SEM) techniques for data analysis. The study utilized …

Inter-Dom Integrated Terminals - The Impact On Airlines Efficiency And Safety, Cassio Greo Campos, Gustavo Faria, Lucas Jusus, Nathália Bião, Rogério Quintela

Student Works

This report performed research to assess the possibility of implementing hybrid passenger terminals. The benefits would be the integrating domestic and international passengers in the same restricted area. The initial hypothesis of this study was to focus on optimization that could bring advantages in terms of efficiency, customer service, and operational safety.

The goal of this project was not to bring in-depth data on the topic, but to expose readers to the main players in the industry and understand the variables that impact the topic. Thus, although there are different perspectives on the integration of terminals, it was possible to …

Remote Pilot Situational Awareness With Augmented Reality Glasses: An Observational Field Study, Jeffery Coleman, David Thirtyacre

International Journal of Aviation, Aeronautics, and Aerospace

With the use of small unmanned aerial systems (sUAS) proliferating throughout industry and public safety, it is imperative to ensure safety of flight. The Federal Aviation Administration (FAA) published regulations for commercial use of sUAS in 2016 and included the requirement to maintain visual line-of-sight with the aircraft at all times. However, due to the nature of the sUAS ground control stations (GCS), remote pilots time-share between observing the aircraft and interacting with the display on the GCS. Time-sharing between the aircraft and GCS can be seen as similar to the cross-check a pilot uses when flying a manned aircraft. …

Quantum Safety Metrics Framework For Commercial Unmanned Aircraft Operators, Tracy L. Lamb, Nathan A. Phillips, Trong Van Nguyen

International Journal of Aviation, Aeronautics, and Aerospace

Commercial unmanned aircraft systems continue to increase in applications and diversity; however, mishaps and accidents erode safety, investment return, and efficiency. Most unmanned aircraft accidents are preceded by leading indicators; the ability to forecast and quantify these may provide increased safety and profitability. This mixed-method research study used a non-experimental parallel convergence approach with multiple instruments, multiple-case study n = 22, and one exemplar case design to develop a quantum safety metric program. This study used a combination of previously validated methods as development instruments, including; the HFACS, STAMP, 'Sierra Scale,' and Accident Prevention Effort equations. The study extended the …

Support To Design For Air Traffic Management: An Approach With Agent-Based Modelling And Evolutionary Search, Gabriella Gigante, Roberto Palumbo, Domenico Pascarella, Alessandro Pellegrini, Gabriella Duca, Miquel Angel Piera, Juan José Ramos

International Journal of Aviation, Aeronautics, and Aerospace

This paper presents a methodology to manage the support to design in ATM operations. We propose a workflow for the design of ATM solutions in a performance-based setting. The methodology includes the evaluation of the impact on human behaviour and exploits a combination of different paradigms, such as Agent-Based Modelling and Simulation, and Agent-Based Evolutionary Search. We prove the soundness of the methodology by carrying out a real case study, which is the transition from Direct Routing to Free Routing in the Italian airspace. The validation results exhibit limited errors for the assessment of the performance metrics under evaluation. Furthermore, …

Predictability Improvement Of Scheduled Flights Departure Time Variation Using Supervised Machine Learning, Deepudev Sahadevan, Palanisamy Ponnusamy Dr, Manjunath K. Nelli Mr, Varun P. Gopi Dr

International Journal of Aviation, Aeronautics, and Aerospace

The departure time uncertainty exacerbates the inaccuracy of arrival time estimation and demand for arrival slots, particularly for movements to capacity constrained airports. The Estimated Take-Off Time (ETOT) or Estimated Departure Time(ETD) for each individual flight is currently derived from Air Traffic Flow Management System (ATFMS), which are solely determined based on individual flight plan Estimated Off Block Time(EOBT) or subsequent delays updated by Airline. Even if normal weather conditions prevail, aircraft departure times will differ from ETOTs determined by the ATFMS due to a number of factors such as congestion, early/delayed inbound flight (linked flights), reactionary delays and air …

Implementing Artificial Intelligence And Machine Learning Into Advanced Qualification Programs, Jennifer R. Herr

Journal of Aviation/Aerospace Education & Research

Since its start, the Advanced Qualification Program (AQP) has encouraged new and innovative strategies for training airline crewmembers. The foundation of AQP is to train crew the way they fly and to find new and innovative ways to increase safety through training. By using data collected through the AQP process, training methods can be refined and improved. New technologies, such as artificial intelligence (AI) and machine learning can make data analysis and training more effective and efficient. This paper will explore these concepts and how AI and machine learning could be implemented in the AQP process to make training more …

Leveraging Aircraft Transponder Signals For Measuring Aircraft Fleet Mix At Non-Towered Airports, Chuyang Yang, John Mott, Darcy M. Bullock

International Journal of Aviation, Aeronautics, and Aerospace

The general aviation sector has contributed significantly to the overall growth of the aviation industry. Fleet mix and operations information is important for the analysis of both the safety and the environmental and economic impact of general aviation activity. Factual data on the impact of environment and safety is particularly important, given the scarcity of airport improvement funds and the strong stakeholder engagement that often occurs when airport investments are evaluated. The research presented herein evaluates Mode S short and extended squitter data collected from three general aviation airports over a one-month period. This article demonstrates that by utilizing the …

Helicopter Shaft Heating Parameters For Polyamide-11 Coating, Selim Kevran Ph.D, Uğur Ati̇ci̇

International Journal of Aviation, Aeronautics, and Aerospace

In this study, the heating parameters required for polyamide-11 (P11) coating of the helicopter shaft were investigated. The torsion value created by the force applied to the middle of the helicopter's shaft is measured. Heating before coating affects the torsion value of the shaft. A new heating mechanism has been designed to cover the shaft surface without changing the torsion value of the shaft. Thus, the coating surface is left inside the furnace and the torsion measurement area outside of the furnace. Taguchi method was used to determine heating parameters such as furnace type, initial temperature and heating time. The …