Management and Operations Commons^™

Design And Implementation Of A Synchronized Data Acquisition System For An Ihlp Cessna 182 Testbed, Celso Ferreira De Moura, Mariano Chavez Rangel

Discovery Day - Daytona Beach

This work presents the design and implementation of a fully integrated data acquisition system for a full scale Integrated High Lift Propulsion testbed based on a Cessna 182Q, with emphasis on hardware integration, sensor reliability, and time synchronization. A centralized architecture was developed in LabVIEW to acquire, process, and store data from both analog and digital sensors, including air data systems, inertial measurement units, control positions, and propulsion instrumentation. Analog sensors were carefully calibrated to ensure accurate conversion to engineering units, while digital sensors were incorporated into a unified framework to maintain consistency across all measurements. All ADC, GPS, INS, …

A Feasibility Study Into The Usability And Application Of An Unmanned Aerial Vehicle For Aircraft Inspection And Quality Assurance Inspections, Reece P. Bhave

Journal of Aviation Technology and Engineering

The global aviation industry is often characterized as one of the safest modes of transportation in the modern world. With an abundance of quality assurance inspections and checks to determine operations safety, modern-day commercial aircraft that are utilized for passenger and cargo flights are held to a higher safety standard defined by regulatory bodies, such as the Federal Aviation Administration in the United States of America and the European Union Aviation Safety Agency in the European Union. While these quality standards are maintained via a series of inspections, checks, and preventative maintenance procedures, they are limited to only visual or …

An Msbe–Driven Advanced Air Mobility Post–Disaster Response System, Olabode A. Olanipekun

Graduate Theses and Dissertations (2019 - present)

In this work, an overarching conceptual design model towards the realization of a proposed Advanced Air Mobility Post–Disaster Response System (AAMPDR system) was explored through the focal lenses of systems thinking (ST), socio–technical systems (STS) and model–based systems engineering (MBSE) paradigms. Initially aimed at providing intervention for casualties and aerial support to emergency rescue workers on the ground in the event of a hurricane disaster around the Gulf shore of the Mobile bay area, Mobile city, AL., the scope of this research subsequently expanded to include a global outlook. Thereafter, culminating in the development of a generalized AAMPDR system model …

Going Airborne: Kent State's Pioneering Leap Into Integrated Advanced Air Mobility, Jason T. Lorenzon

National Training Aircraft Symposium (NTAS)

This proposal centers on the development of a Concept of Operations in Advanced Air Mobility (AAM). Kent State University's College of Aeronautics and Engineering is poised to pioneer the integration of drones and electric Vertical Takeoff and Landing (eVTOL) systems, bridging the gap between its campus and airport by transporting students and faculty the 3NM distance from campus to the airport and back by a UAV. Beyond a standard research initiative, this proposal signifies a groundbreaking effort to reshape the landscape of educational aeronautics and Advanced Air Mobility and Urban Air Mobility. Our overarching goal is to transcend conventional boundaries …

Utilizing The System Engineering Trade Study Analysis Method To Analyze Patient Aeromedical Evacuation, Sara Shaghaghi, Jeremy M. Slagley, Michael E. Miller, Gaiven Varshney

Faculty Publications

The US Air Force has gone through many aeromedical patient isolation transport system designs. The first designs were developed in response to the Ebola outbreak in 2014 and, more recently, the COVID-19 pandemic. The trade study analysis part of the system engineering design method was used to analyze the historic and current aeromedical patient contamination control transport systems. A trade study is a process that evaluates alternatives based upon various “-ilities”, such as reconfigurability, flexibility, durability, cost, and more, and performs a systematic analysis to aid designers in producing a ‘good’ design alternative given the large set of possible solutions. …

Quantum Safety Metrics Framework For Commercial Unmanned Aircraft Operators, Tracy L. Lamb, Nathan A. Phillips, Trong Van Nguyen

International Journal of Aviation, Aeronautics, and Aerospace

Commercial unmanned aircraft systems continue to increase in applications and diversity; however, mishaps and accidents erode safety, investment return, and efficiency. Most unmanned aircraft accidents are preceded by leading indicators; the ability to forecast and quantify these may provide increased safety and profitability. This mixed-method research study used a non-experimental parallel convergence approach with multiple instruments, multiple-case study n = 22, and one exemplar case design to develop a quantum safety metric program. This study used a combination of previously validated methods as development instruments, including; the HFACS, STAMP, 'Sierra Scale,' and Accident Prevention Effort equations. The study extended the …

Conceptual Design Of A South Pole Carrier Pigeon Uav, Kendrick M. Dlima

Master's Theses

Currently, the South Pole has a large data problem. It is estimated that 1.2 TB of data is being produced every day, but less than 500 GB of that data is being uploaded via aging satellites to researchers in other parts of the world. This requires those at the South Pole to analyze the data and carefully select the parts to send, possibly missing out on vital scientific information. The South Pole Carrier Pigeon will look to bridge this data gap.

The Carrier Pigeon will be a small unmanned aerial vehicle that will carry a 30 TB solid-state hard drive …

Incidence Of An Astronaut Not Sealing The Pressure Garment Visor On Reentry, Cameron M. Smith, Trent Tresch

Journal of Human Performance in Extreme Environments

Audiovisual records of a Project Mercury pilot’s activities during an orbital flight indicate that his visor was left open during reentry and descent to the sea surface, phases of flight during which cabin pressure loss was to be mitigated by suit pressurization; however, the suit could not have been pressurized with the visor open. Thus, for a presently unknown reason, a critical safety step—sealing the visor and making a pressure suit integrity test before reentry—was overlooked in this flight. Later, Space Shuttle flights were carried out with visors unsealed for much of the launch and landing phases, with the false …

Effects Of A Hand Luggage Guiding System On Airplane Boarding Time And Passenger Experience, Mirte Vendel, Sagar Dangal, Jessica Coppens, Suzanne Hiemstra-Van Mastrigt, Peter Vink

International Journal of Aviation, Aeronautics, and Aerospace

This research investigates whether a hand luggage guiding system in overhead bins decreases boarding time and improves boarding experience during aircraft boarding process. A guiding system was developed which allocates and displays the passengers luggage space in the overhead bin. The allocated space is guided by a light strip in front of the display that blinks when a passenger comes close to their allocated luggage space. This system was tested in a Boeing 737 test fuselage. Compared to regular boarding, a boarding time reduction of 16 to 23 seconds was estimated using the hand luggage guiding system in groups of …

Global Aviation System: Towards Sustainable Development, Marina P. Bonser Dr.

International Journal of Aviation, Aeronautics, and Aerospace

Aviation around the world has integrated into a global system. As the integration process continues, more aspects and levels of it need to be lead towards the sustainable development of the whole system via advancing strategic management, global communication proficiency, and technological expertise. It becomes essential to enrich global language (English) proficiency with cross-cultural communication competence not only for communication in the air but also for airport security, passenger and cargo services, aircraft and equipage engineering, building, and maintenance. Nowadays lower levels of management need more advanced strategic thinking and problem solving skills, and higher levels of management need global …

Determination Of Takeoff And Landing Distances Using An Ipad Performance Application For The Diamond Da40, Tyler A. Babb, Christina Hiers

International Journal of Aviation, Aeronautics, and Aerospace

All pilots are required to calculate aircraft performance parameters prior to flight. This includes takeoff and landing distances. Traditionally, pilots in training have planned for takeoff and landing performance using paper charts provided by the manufacturer. However, professional pilots use devices such as Flight Management Systems (FMS), Electronic Flight Bag (EFB) applications, or on-board performance computers (OPC) to make such calculations. During primary flight training, student pilots could make performance calculations with proper software, similar to the method they will typically use at the professional level. Recently an iPad application was released which can calculate numerous performance parameters for specific …

Determining Logistics Ground Support Manpower Requirements For A Reusable Military Launch Vehicle, Sydney C. Michalski

Theses and Dissertations

Successful space-based technologies like satellite imagery and GPS have increased military demand for a rapid-response launch capability. AF Space Command's Operationally Responsive Spacelift program was developed to ensure that the AF has the capability to launch a payload into orbit within hours of a tasking notification, and requires development of a new space launch vehicle. The Reusable Military Launch Vehicle (RMLV) is currently in the design phase. The AF Research Laboratory sponsored development of the MILEPOST simulation model in order to assess the turnaround time, and thus responsiveness, of various design alternatives. The focus of this thesis is to improve …

Reusable Space Vehicle Ground Operations Baseline Conceptual Model, Dennis R. Maynard, Patricia Pettit

Theses and Dissertations

Modeling efforts for future space operation vehicles at the United States Air Force Research Labs Air Vehicles Directorate have been focused towards the in-flight mission. To better serve the research and development effort, a simulation of the ground operations is required allowing for trade-offs within turnaround operations and between the components that drive those procedures. However, before a simulation can be developed a conceptual model must be generated to guide the model building process. This research provides a baseline conceptual model for reusable space vehicles based on the space shuttle as the only operational vehicle of its kind. The model …