Maintenance Technology Commons^™

Advancing Vtol Tail-Sitter Stability Through Modern Flight Control And System Identification, Tobey Cram, Jacob House, Alexander Theophanis

Discovery Day - Daytona Beach

Title: Advancing VTOL Tail-Sitter Stability Through Modern Flight Control and System Identification   The concept of tail-sitter aircraft can be traced back to Nikola Tesla nearly 100 years ago; however, no aircraft with this novel design materialized until nearly 20 years later during World War II, when efforts were made to reduce reliance on runways. One notable design that emerged during the Cold War was the Convair XFY-1 Pogo. This design failed for reasons common to many others of the time: pilots had extreme difficulty landing while looking over their shoulders, and the technology of the era could not reliably maintain …

Orbital Reliable Printed Circuit Boards, Thomas Maxwell Starnes, Keegan Blake Jordan, Ian Griffith, Grant Monroe Pesqueira, Vishal Navin Patel

Senior Design Project For Engineers

Deep Interstellar Solutions is proposing a device to produce custom, serviceable printed circuit boards (PCBs) in low Earth orbit. This technology uses blank PCBs that are laser-etched and prepared for electrical components, then stored in the module. This method of PCB production allows for rapid repairs or prototyping without the need for subsequent resupply missions. By implementing this technique, future missions will achieve greater autonomy, sustainability, and resource efficiency. The goal of this development is to pioneer the creation of custom circuitry for use in deep-space missions where resupply is neither cost-effective nor timely.

The E-Strip® As A Tool For Predictive Maintenance To Monitor And Control Shot Peening Processes, Walter A. Beach, Scott Glasier

15th International Conference on Shot Peening

The primary objective of this paper is to demonstrate the E-Strip® is capable of providing real-time feedback to the machine controller for making necessary process adjustments due to external forces, such as machine wear. Adjustments may include regulating air pressure and shot flow within pre-defined tolerances dictated by specification. It is anticipated that this integrated approach will significantly reduce variations in intensity levels observed from part to part and lot to lot.

A Feasibility Study Into The Usability And Application Of An Unmanned Aerial Vehicle For Aircraft Inspection And Quality Assurance Inspections, Reece P. Bhave

Journal of Aviation Technology and Engineering

The global aviation industry is often characterized as one of the safest modes of transportation in the modern world. With an abundance of quality assurance inspections and checks to determine operations safety, modern-day commercial aircraft that are utilized for passenger and cargo flights are held to a higher safety standard defined by regulatory bodies, such as the Federal Aviation Administration in the United States of America and the European Union Aviation Safety Agency in the European Union. While these quality standards are maintained via a series of inspections, checks, and preventative maintenance procedures, they are limited to only visual or …

Exploring Strategies And Innovations In Airline Profitability Assessment: The Role Of Artificial Intelligence, Elif Degirmenci

Journal of Global Hospitality and Tourism

The airline industry's profitability assessment remains a complex yet critical aspect of strategic decision-making, spanning from hub profitability to individual flight performance. This paper explores the diverse methodologies and challenges involved in evaluating both line and network profitability, emphasizing the need for innovative approaches in reconciling variable costs associated with aircraft types and route assignments. Traditional methods are juxtaposed with innovative concepts like the Blended Aircraft Cost model, offering insights into enhancing market route profitability. Additionally, advanced methodologies such as horizontal and vertical methods are discussed, alongside the role of artificial intelligence in revolutionizing real-time profitability analysis. Through a comprehensive …

Predictive Maintenance Analysis Of Turbofan Engine Sensor Data, Stanley A. Melkumian

The Journal of Purdue Undergraduate Research

Predictive maintenance in aviation and aerospace applications is among the most explored problems in machine learning (ML) and artificial intelligence (AI), and datasets such as NASA’s C-MAPPS turbofan engine degradation simulation data have proven invaluable, helping researchers explore numerous questions on engine performance, maintenance, and failure. The purpose of this study was to extend the current research on predicting the remaining useful life (RUL) of engines and their risk classification. Starting with simple yet under-investigated nonlinear survival and random forest models, the analysis implemented eXtreme Gradient Boosting (XGBoost) and long short-term memory (LSTM) from TensorFlow’s Keras library. For both regression …

Fundamentals Of Sustainability, Eva Maleviti

Publications

Fundamentals of Sustainable Aviation is the frst textbook to survey the critical feld of sustainability within the aviation industry. Taking a systems thinking approach, it presents the foundational principles of sustainability and methodically applies them to diferent aviation sectors. Opening with the basics of sustainability, emphasising the Sustainable Development Goals, the book then considers the environmental, economic and social dimensions of aviation. The following chapters apply these insights to aviation design, supply chains, operations, maintenance and facilities. The fnal chapter examines the concept of resilience in sustainable aviation. Overall, the textbook shows how future sustainability can be achieved by making …

Developing Systems Engineering And Machine Learning Frameworks For The Improvement Of Aviation Maintenance, Fatine Elakramine

Theses and Dissertations

This dissertation develops systems engineering and machine learning models for aviation maintenance support. With the constant increase in demand for air travel, aviation organizations compete to maintain airworthy aircraft to ensure the safety of passengers. Given the importance of aircraft safety, the aviation sector constantly needs technologies to enhance the maintenance experience, ensure system safety, and limit aircraft downtime. Based on the current literature, the aviation maintenance sector still relies on outdated technologies to maintain aircraft maintenance documentation, including paper-based technical orders. Aviation maintenance documentation contains a mixture of structured and unstructured technical text, mainly inputted by operators, making them …

Conceptual Design Of Fuel Dumping System In Aircraft, Naveen M. Kumar Mr., Ravi A. Kannan Be., Magesh L Be., Praveen T. Kumar Be., Vijay K. Babu Me., Prashanth Radhakrishnan Be.

International Journal of Aviation, Aeronautics, and Aerospace

Airlines release the unburned jet fuel into the atmosphere to reduce the weight of aircraft before landing. Sometimes, aircraft reach a weight more than takeoff weight while departing from the airport. Therefore, the pilot follows the ATC comment to dump fuel into the atmosphere to reduce the aircraft's weight to avoid accidents. Due to fuel dumping, an airline faces fuel consumption, loss, and several diseases affect environmental pollutants, and living things. The total fuel consumption of commercial airlines worldwide in 2021 is 57 billion gallons. If jet fuel routinely hit the ground, it would pollute water and land and damage …

Aircraft Hydraulic Systems - Fundamentals, Nihad E. Daidzic

Aviation Department Publications

Aircraft hydraulic systems are essential non-propulsive power systems. Hydraulic power systems are used to power major functional aircraft systems, such as flight controls (primary and secondary), friction braking, nose gear steering, thrust-reversers, operating heavy cargo doors, etc.

Investigation Into The Effects Of Blade Tip Twist On Noise Reduction For A Naca 0012 Rotor Blade, Uyen T. Sou

McNair Research Journal SJSU

The advancement of the urban air mobility concept is heavily dependent on the public acceptance of the aircraft vehicles used for air taxis. The importance of the perception of noise by humans is crucial to the passing of legislation and proposals working to implement the new transport system. The investigation into how the noise perception can be reduced is vital to the success of the personal air travel industry. The air taxi design has been geared towards the rotorcraft models. Therefore, the investigation into the rotor blade designs is necessary because, similar to helicopters, the main component in noise generation …

Development Of A Multi-Probe Kelvin Scanner Device For Industrially-Relevant Characterization Of Surface-Activated Carbon Fiber Reinforced Thermoplastic Composites, Kirby Simon

McKelvey School of Engineering Graduate Student Theses & Dissertations

Carbon fiber reinforced thermoplastic (CFRTP) composites are becoming increasingly attractive materials in manufacturing due to their lightweight nature, mechanical strength, and corrosion resistance. Surface activation of these materials is usually required during processing to increase the bond strength of assemblies (aerospace and automotive industries) or improve adhesion with implants (biomedical industry). Industrially-relevant, nondestructive quality control methods for assessing the activation state of these materials do not currently exist, however. Applying principles discovered through the use of scanning probe microscopy, a multiple-probe Kelvin scanning (MPKS) device has been developed that can assess the uniformity of the activation state of plasma-treated CFRTP …

Satellite Maintenance: An Opportunity To Minimize The Kessler Effect, Bettina M. Mrusek Dr.

International Journal of Aviation, Aeronautics, and Aerospace

Recently, there has been an emphasis on the growing problem of orbital debris. While the advantages of placing satellites into space are numerous, advances in satellite technology combined with the growth of the industry have resulted with a significant amount of debris in the orbits surrounding our planet. The harshness of the space environment has also contributed to the debris, as evidenced by the number of objects currently in orbit which are not operational. As the amount of debris grows, so too does the likelihood of collisions, ultimately culminating in the Kessler Effect. However, recent advances in propulsion, advanced navigation, …

High Dynamic Range Optical Devices And Applications., Elijah Robert Jensen

Electronic Theses and Dissertations

Much of what we know about fundamental physical law and the universe derives from observations and measurements using optical methods. The passive use of the electromagnetic spectrum can be the best way of studying physical phenomenon in general with minimal disturbance of the system in the process. While for many applications ambient visible light is sufficient, light outside of the visible range may convey more information. The signals of interest are also often a small fraction of the background, and their changes occur on time scales so quickly that they are visually imperceptible. This thesis reports techniques and technologies developed …

Book Review: Fundamentals Of International Aviation, Alan Bender

International Journal of Aviation, Aeronautics, and Aerospace

Not applicable.

The Effects Of Using Noise Reduction Turbofan Engine Nozzle Designs On A Turbojet Engine, Donald Bartlett

Journal of Applied Sciences and Arts

Abstract

Aircraft noise is a complex topic which is projected to increase with the increasing number of aircraft and size of the engines. Turbine-powered aircraft produce sounds that are considered pollutants at certain decibel levels. Turbofan engines are inherently quieter than turbojet engines for a given level of thrust. The purpose of this research is to determine if current turbofan noise reduction nozzles could reduce the amount of noise for turbojet engines at two different thrust levels. Three turbofan engine nozzles were designed and tested on a turbojet engine. Decibel levels of 30 frequencies for each of the nozzles were …

More Electric Systems Architecture Effect On Business Jet Performance, Kelsey M. Mazur

Doctoral Dissertations and Master's Theses

A more-electric systems architecture, using current state of the art components, is proposed for the business jet Dassault Falcon 2000. A model of the existing aircraft, both of its overall flying characteristics and performance and of its detail systems layout, is created using Pacelab APDc and SysArcc programs. The model is validated with respect to the aircraft published data. Then, another model of the same aircraft is created but, this time, it is for the aircraft with the new architecture and their respective performance is compared. In particular, this results in changes in mission range and the overall system's weight. …

Expedient Airfield Runway Repair Using Folded Fiberglass Mat, Christopher Y. Tuan, Willaim C. Dass

Department of Civil and Environmental Engineering: Faculty Publications

For expedient airfield runway repair, the US Air Force has developed a folded fiberglass mat to cover craters repaired with a well-compacted granular base material. The objective of this study was to evaluate the adequacy of using polymer plugs to anchor the mat to a repaired asphalt pavement for heavy aircraft operations. The effort consisted of materials testing, field experiments and analytical modeling. An 89,800-kg (198,000-pound) load cart having the footprint of a single C-5 main gear was pulled on a mat with wheels locked to simulate full braking forces. Anchor bushings were instrumented to measure anchor loads. A simplified …

Experiment And Simulation Of The Acoustic Signature Of Fatigued-Cracked Gears In A Two-Stage Gearbox, Matthew James Ostiguy

Master's Theses

This thesis focuses on the development of a health monitoring system for gearbox transmissions. This was accomplished by developing and understanding a two-stage gearbox computer model that emulates an actual gearbox test rig. The computer model contains actual gearbox geometry, flexible shafts, bearings, gear contact forces, input motor torque, output brake torque, and realistic gearbox imbalance. The gear contact force of each gear stage and the input bearing translational acceleration were the main outputs compared between a healthy gearbox and damaged gearbox computer model. The damage of focus was a fatigue crack on the input pinion gear. A sideband energy …

Uncertainty Assessment Of Aircraft Maintenance Times By Using Evidence Theory And Expert Judgment Elicitation, Huseyin Kudak

Engineering Management & Systems Engineering Theses & Dissertations

The goal of this study is to demonstrate the use of the Dempster-Shafer Theory of evidence as a decision aid to predict aircraft maintenance times during wartime operations using expert judgment elicitation. Increased precision in time estimation enables the jet engine aircraft maintenance facility commander to make more accurate decisions for the Air Force's wartime tactical operations allowing the commander to gain a decisive advantage. A questionnaire was designed to elicit judgments from experts in the Aircraft Maintenance Facility (AMF) to investigate maintenance times of the major failure modes (Ignition, Fuel, and Electrical). Results of the expert judgment elicitation were …

Enhancing Commercial Aircraft Survivability Via Active Venting, Roger L. Veldman

Dissertations

A new technique for enhancing aircraft safety in the event of an on-board explosion was studied. The method under study employs deployable vent panels located on the fuselage which are activated by an array of pressure sensors in the aircraft interior. In the event that an explosion is detected, appropriate vent panels are rapidly released from the aircraft. This approach seeks to provide timely relief of explosive pressures within an aircraft to prevent catastrophic structural failure.

In this study, the approximate time scale of an explosive detonation and the subsequent sensing and electronic processing was determined. Then, the actuation response …

Aircraft Quality Casting Standards, Robert Katz, Robert Bolin , Depositor

Robert Katz Publications

These standards are to be used in connection with the Handbook for Instructions for Aircraft Designers, 8^th Edition …

In the radiography of aircraft castings, markings appearing on the film may be attributed to either the condition of the castings examined, or to some details of the radiographic process entirely unrelated to the quality of the castings, These latter patterns must be recognized and related to the radiographic process so that sound castings will not be unnecessarily rejected. Radiographs must be carefully compared with the surface irregularities of the casting they represent before an attempt is made to …