Automotive Engineering Commons^™

Investigation Of The Impact Of The Shape Of The Wings On Formula E Racing Car Performance: Enhancements For Optimal Aerodynamics, Ednie Marthe Adlaikah Jozil

Honors Undergraduate Theses

The aerodynamic performance of a Formula E chassis significantly dictates its overall race efficiency, directly impacting crucial parameters such as battery range and thermal management. This thesis investigates the external aerodynamics of the baseline Gen 2 Formula E car and evaluates the performance gains of two novel aerodynamic packages: a "Fully Modified" configuration and a "Flat Rear Wing" design. Computational Fluid Dynamics (CFD) simulations were conducted to analyze drag coefficients (Cd), downforce generation, and vehicle wake structures at race-relevant free-stream velocities (e.g., 37 m/s and 89 m/s). To ensure numerical robustness, the computational setup was validated using a smooth sphere …

Machine Learning And Multi-Scale Optimization For Control And Energy Management In Connected And Automated Vehicle Propulsion Systems, Joshua D. Orlando

Dissertations, Master's Theses and Master's Reports

This dissertation presents a multi-scale optimization framework leveraging machine learning (ML) to enhance energy efficiency in connected and automated vehicle (CAV) propulsion systems. As transportation transitions toward hybridization and automation, the integration of vehicle-to-everything (V2X) connectivity and advanced control algorithms offers unprecedented opportunities for energy reduction. This research addresses three critical scales of vehicle energy management: multiple vehicle-level coordination, component-level powertrain dynamics, and real-time vehicle parameter estimation.

First, the research investigates the energy consumption characteristics of heterogeneous propulsion systems—ranging from internal combustion engines to battery electric vehicles across light- and heavy-duty sectors—on arterial roadways. Utilizing Particle Swarm Optimization (PSO) and …

End-To-End Development And Experimental Validation Of A 1/10-Scale Autonomous Vehicle, Rikkin Pankaj Panchal

Electrical Engineering Theses

Autonomous vehicle development demands vast resources, making scaled down platforms a critical alternative for solving core algorithmic challenges. The primary contribution of this thesis is the end to end development and validation of a complete real time autonomous driving pipeline deployed on a one tenth scale vehicle. To streamline platform development, an AI assisted annotation framework automates dataset generation, significantly reducing manual labor while improving training data quality. The system perception stack features a reinforcement learning guided online multi camera calibration framework that enables adaptive surround view stitching without the need for offline recalibration. This is paired with robust lane …

Iuse: A Gamified Virtual Learning Platform For Connected Vehicle Applications To Enhance Undergraduate Transportation Education, Tianyu Shen, Di Yang, Kai Sun, Hong Yang, Kun Xie, Mansoureh Jeihani

Civil & Environmental Engineering Faculty Publications

Emerging transportation technologies are rapidly reshaping transportation systems and industry practice. However, most transportation undergraduate curricula still emphasize foundational topics such as geometric design, travel demand forecasting, pavements, and soil properties, typically delivered through lecture-centric instruction. While these subjects remain essential to the discipline, they do not fully reflect the pace of technological change or provide sufficient opportunities for experiential learning with modern tools and data. This gap limits students’ exposure to CV concepts and their ability to translate theory into practice.

Focusing on a key emerging technology, connected vehicles (CVs), this paper bridges the above gap by introducing a …

Digital Twin Technologies For Battery Systems: Advancements, Applications, And Future Directions, Seyed Saeed Madani, Yasmin Shabeer, Michael Fowler, Satyam Panchal, Carlos Ziebert, Hicham Chaoui, François Allard

Electrical & Computer Engineering Faculty Publications

The relationships among deep learning, edge computing, artificial intelligence (AI), and the most recent advancements in digital twin (DT) technology for battery energy storage systems are discussed in this paper. The study highlights the need for improved cloud-edge coordination, AI model development, and stronger cybersecurity features by demonstrating real-world applications of digital twin technology in electric vehicles (EVs), aircraft, and grid storage. It also described DT-based structures for fault detection, real-time monitoring, and optimization through standardization and battery management system (BMS) fusion. Because DT-based solutions for distributed energy resources (DERs) offer improved energy management systems, various studies have been conducted …

Gem-Can: A Real-World Dataset Of Can-Bus Attack Scenarios On An Autonomous Vehicle For Intrusion-Detection Research, Mahsa Tavasoli, Abdolhossein Sarrafzadeh, Ali Karimoddini, Tienake Phuapaiboon, Milad Khaleghi, Daniel Tobias

Electrical & Computer Engineering Faculty Publications

This paper presents GEM-CAN, a labelled Controller Area Network (CAN) dataset captured from an autonomous GEM e6 platform under both normal operation and controlled cyber-attack conditions.

The dataset contains ∼143 K frames comprising (i) ∼ nominal autonomous operation (∼100k messages), (ii) DoS floods using arbitration ID 0 × 00000000 (∼41 K messages), and (iii) data-tampering injections that reuse legitimate IDs for brake and steering-lock (∼1.3 K messages). Each record includes timestamp, arbitration ID (11/29-bit), DLC, eight payload bytes, and a Normal/Attack label. A companion metadata file enumerates attack windows, PCAN bus-load traces, bitrate, and test conditions. Data were collected with …

Interpretable Battery Soh Prediction: A Comparative Interpretability Framework For Multi-Architecture Ml Models, Shafiyee Islam, Gon Namkoong

Electrical & Computer Engineering Faculty Publications

This work introduces a unified interpretability-efficiency framework for lithium-ion battery state of health (SOH) prediction using hybrid deep learning architectures. We comparatively analyze four hybrid models: CNN LSTM MultiHead, CNN Feature Extractor LSTM, DNN LSTM, and DNN BiLSTM to disentangle how network topology, feature composition, and computational design influence both predictive fidelity and physical interpretability. By integrating Monte Carlo Shapley (MC Shapley), background occlusion SHAP (BoSHAP), and ablation analysis, we quantify the contribution and robustness of five electrochemical feature groups: time, capacity, voltage, dQ/dV and peaks of dQ/dV from NASA battery dataset. The results reveal a consistent dominance of differential …

Statewide Corridor Evacuation Response And Re-Entry Behaviors In Florida During Hurricane Irma, Xin Wang, Yuan Zhu, Hong Yang, Kun Xie

Electrical & Computer Engineering Faculty Publications

Hurricane Irma stands as one of the most destructive tropical storms to make landfall in the United States, particularly impacting the State of Florida, where it prompted the largest evacuation in history with approximately 7 million residents. The profound consequences of mass evacuation underscore the critical need to understand travel behaviors during hurricane evacuation and the recovery process. This research analyzes statewide evacuation and re-entry patterns, leveraging diverse datasets, including TTMS data from main corridors and GIS data. A statewide corridor-based empirical analysis framework is constructed to characterize evacuation and re-entry response patterns using sensor-based traffic observations. The results show …

Communication-Aware Energy Optimization For Electric Vehicles With Adaptive Cruise Control, Shahriar Shahram

Graduate Studies Theses and Dissertations 2026

This dissertation develops information-driven methods to reduce traction energy in battery electric vehicles during adaptive and cooperative cruise control. Physics-grounded energetics are embedded in a predictive controller that accounts for intermittent V2V preview, sensing noise, packet loss, and powertrain limits. To ensure deployability, the nonconvex traction–power map is replaced by locally convex surrogates so each step solves a small, strictly convex QP in real time (average ≈ 70 ms/step on a desktop CPU: 8 cores/16 threads, 4.2–5.0 GHz), leaving margin at typical sampling rates (Ts =0.05–0.10 s; N=15–25).

Across standardized drive cycles from NREL DriveCAT—including FTP–75 (light duty), NREL Class …

Lean Service System Optimization In U.S. Automotive Maintenance Centers: A Time Study And Simulation-Based Approach To Reducing Service Cycle Time And Increasing Efficiency, Rakibul Hasan Sarker

All Graduate Theses, Dissertations, and Other Capstone Projects

The primary objective of this study is to measure the current service time at a U.S. automobile service center, with the aim of reducing waste and optimizing service operations through time study and simulation modeling. Inefficiencies in those service centers increase service time and labor costs, reduce service quality, and reduce workshop productivity, thereby increasing customer waiting time. In this study, real-world shop floor data were collected from a single service center, namely Jiffy Lube. Over the course of ten working days, 205 vehicle data points were acquired. Service time, bay time, and overall process time were computed and examined …

Optimizing Maintenance Routes For Highway Infrastructure Using Leader-Follower Autonomous Vehicles, Qing Tang, Chenxi Chen, Xianbiao Hu, Yuxin Ding, Tianjia Yang

Civil & Environmental Engineering Faculty Publications

The Autonomous Truck Mounted Attenuator (ATMA), a leader–follower style connected and automated vehicle system, enhances safety during transportation infrastructure maintenance in work zones. However, the significantly lower speed of ATMA, compared to regular vehicles, causes moving bottlenecks that reduce roadway capacity and prolong queuing, leading to further delays. Different ATMA routes lead to varying patterns of time-dependent capacity drop, affecting the user equilibrium traffic assignment and resulting in differing system costs. This study aims to optimize ATMA routing within a network to minimize the system cost associated with its slow-moving operation. To this end, a queuing-based traffic assignment approach is …

Machine Learning-Based Lifetime Prediction Of Lithium Batteries: A Comparative Assessment For Electric Vehicle Applications, Abdelilah Hammou, Raffaele Petrone, Demba Diallo, Boubekeur Tala-Ighil, Philippe Makany Boussiengue, Hicham Chaoui, Hamid Gualous

Electrical & Computer Engineering Faculty Publications

This paper evaluates and compares four data-driven methods (Gaussian Process Regression (GPR), echo state network (ESN), gated recurrent unit (GRU), and long short-term memory (LSTM)) for lithium-ion capacity prognostics adapted to electric vehicle conditions. This comparison aims to find the most efficient prognosis method considering two constraints: the limitation of computational power and the unavailability of on-board capacity measurement that requires full charge and discharge conditions. The machine learning models are trained using capacity values estimated under vehicle conditions. The ageing data is collected from cycling tests of two battery chemistries, Lithium Fer Phosphate (LFP) and Nickel Manganese Cobalt (NMC), …

The Efficacy Of Hybrid Manufacturing For High Stress Automotive Components, Logan Trimmer

Harrisburg University Other Works

The goal of this research was to establish the viability of using hybrid manufacturing for automotive applications. By verifying that high-stress components can be created, it can be assumed that any other lower stress part could be made to match the strength requirements. A limiting factor of adoption for hybrid manufacturing is how new the technology is. Studies on time and cost were performed allowing for comparisons with traditional manufacturing technologies (casting, forging, milling) used in automotive applications. This research utilized a Haas Automation UMC750 5-axis CNC mill with a Meltio laser wire direct energy deposition attachment. Fusion 360 was …

A Comparative Analysis Of Explainable Ai (Xai) Techniques For Transparent And Reliable Image Classification, Sovon Chakraborty, Shakib Mahmud Dipto, Kevin R. Pilkiewicz, Michael L. Mayo, Pratip Rana

Computer Science Faculty Publications

Evaluating the trustworthiness of black-box machine learning models remains a significant methodological challenge. Their lack of transparency and interpretability limits applicability, because stakeholders often seek transparency before trusting the results of black-box machine learning models. Explainable AI (XAI) methods provide for human-understandable justifications and informed decision-making of these black-box architectures. Therefore, it is imperative to select the proper XAI model tailored to specific tasks. In this research, we focus on examining four XAI techniques: PEEK, LRP, GRAD-CAM, and LIME to understand how they perform against each other for image classification tasks. We evaluate the performance, robustness, generalizability, noise stability, and …