Automotive Engineering Commons^™

Engineering Multifunctional Silicon Nanostructures From Biorenewable Cellulose Nanocrystals, Nancy Chen

All Dissertations

The imperative search for alternative materials to address the pressing demand for advance energy storage is underscored by the escalating environmental predicaments. Lithium-ion batteries (LIBs) with graphite anodes have become the benchmark in energy storage; however, they are approaching a saturation point in terms of energy density. Silicon emerges as a promising contender to supplant graphite, owing to its profuse availability, cost-effectiveness, and impressive specific capacity of 4200 mAh g^-1. By integrating silicon anodes, LIBs stand to undergo a radical transformation, markedly diminishing in weight and size, thus heralding a novel wave of compact, lightweight energy storage systems. …

Multi-Scale Modeling Of Selective Laser Sintering: From Manufacturing Process And Microstructure To Mechanical Performance In Semi-Crystalline Thermoplastics, Cameron Zadeh

All Dissertations

Selective laser sintering is an additive manufacturing process that opens many design possibilities but is limited in its reliability and reproducibility. Numerical simulations validated by experimental data yield insights into the process and resulting part properties, allowing users to make more informed decisions. In this dissertation, a model for the process and microstructure is developed and validated, followed by a coupling to mechanical models to predict part performance. Further developments include a new addition of a reaction kinetics model to the process model to describe the interplay between thermal degradation and melt pool properties, and an exploration of the parameter …

Real-Time Degradation Abatement Framework For Energy Storage System In Automotive Application Using Data-Driven Approaches, Laxman Timilsina

All Dissertations

The increasing popularity of electric vehicles (EVs) is driven by their compatibility with sustainable energy goals. However, the decline in the performance of energy storage systems, such as batteries, due to their degradation puts EVs and hybrid electric vehicles (HEVs) at a disadvantage compared to traditional internal combustion engine (ICE) vehicles. The batteries used in these vehicles have limited life. The degradation of the battery is accelerated by the operating conditions of the vehicle, which further reduces its life and increases the reliability and economic concerns for the vehicle’s operation. The aging mechanism inside a battery cannot be eliminated but …

Dynamic Impact Testing And Numerical Analysis Of Non-Proprietary Astm F2656-20 M50 Anti-Ram Barrier Components, Weston Kelley

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

In a post-9/11 world, hostile actors are using vehicles as weapons to inflict civilian casualties. Pedestrians, vulnerable road users, military personnel, and police may be targeted using a vehicle as a weapon. The United States Department of Defense (DoD) also utilizes Entry Control Facilities (ECFs) which are carefully designed transportation corridors to manage how threat vehicles are able to access military facilities. In 2004, DoD started to upgrade all ECFs using both passive and active barriers. Many anti-ram vehicle barriers were evaluated according to the criteria established in ASTM F2656, but to date few options are available which are (1) …

Aerodynamic Design And Analysis Of A Modified 2006 Mazda Miata, William N. Recher

Honors College Theses

Aerodynamic forces developed by automobiles have destabilizing effects at high speed. These forces tend to skew toward a vehicle’s rear which can present safety concerns, especially for rear-wheel-drive automobiles like the Mazda Miata. To address oversteer and high-speed instability, a vehicle’s design can be tailored to bring about aerodynamic balance and improve traction. LiDAR was used to bring the physical automobile into the digital space. Then, a splitter and diffuser were added to reduce the magnitude of the destabilizing forces. Next, the size and shape of the rear-wing required to balance the vehicle was calculated using a combination of parameters …

Exploration Of Characteristic Curve In Fox Float 3 Shock Dampers To Expedite Shock Damp Tuning., Joshua R. Moore

Honors College Theses

The shock absorber is an integral part of a vehicle suspension system and has a strong influence on its performance, especially in the case of motorsports. It is important to study the force versus velocity relationship, commonly known as the characteristic curve of the shock absorber both during compression and rebound. Vendor-supplied characteristics often reflect the behavior of the shock absorber in a particular setting. However, during the installation, the settings inside the shock absorber are adjusted to increase the human comfort level and performance of the vehicle. This may change the characteristic curve of the shock. The available data …

Drivertech Vehicle Monitoring System, Sarah Aldhafeeri, Fillip Cannard, Kaitlyn Ledon, Shea Spellman

Posters - 2024

DriverTech provides critical data to shipping companies about their fleets of vehicles and drivers. This is done through their vehicle monitoring system. Unfortunately, Windows 10 is reaching end of life, and DriverTech is looking for a new software solution.

Modeling The Impact Of Connected And Automated Vehicles On Driving Behaviors And Safety: A Driving Simulator Study, Abdalziz Alruwaili

Civil & Environmental Engineering Theses & Dissertations

Connected vehicles (CVs), equipped with advanced sensors, can communicate safety messages to drivers. Automated vehicles (AVs), designed with the ability to automate safety critical control functions, will redefine the traditional role of drivers. This dissertation aims to investigate the impact of connected and automated vehicles (CAVs) on driving behaviors and safety outcomes using data from driving simulator experiments. More specifically, the research objectives include:

1. Modeling the impacts of CVs on driving aggressiveness and situational awareness in highway crash scenarios.

2. Modeling the impacts of CV technologies on driving behaviors and safety outcomes in highway crash scenarios under diverse weather …

Autonomous Roadside Mower Testing And Evaluation In Digital Twin Environments, Michael Mardikes, Ethan Brown, Timothy Wiegman, Nathan Sprague, Shreyas Supe, J. T. Evans

Graduate Industrial Research Symposium

Modern day roadside mowing operations in Indiana are performed by contractors operating tractors that pull flex-wing mowers. These mowing operations span over 11,000 miles of road across the state and create serious risk for human operators. Autonomous mowers can provide a safer alternative, but a replacement system must demonstrate an acceptable level of trust before large-scale deployment. A high-fidelity digital-twin environment can facilitate the capability to rapidly test and evaluate platforms in their desired application, while enabling zero real-world risk, a wide range of test variables, and repeatability of a test setup. The simulation environment must be at a level …

Finite Element Analysis Of Thermal-Mechanical Instabilities In Nonmetallic Friction Composite Material, Joseph-Shaahu Shaahu

Electronic Theses and Dissertations

Thermal-mechanical instability (TMI) has been a research topic of interest as it focuses a lot on transportation systems. Thermal-mechanical instability was first noticed in railway and experimentally studied with a pin-to-pin or pin-to-surface setup of sliding contact. The topic has been extended into brakes and clutches which are two of the most common sliding systems most susceptible to thermal buckling and thermoelastic instability (TEI), where thermal buckling and thermoelastic instability are two sub-categories of thermal-mechanical instability. Thermal-mechanical instability is an ongoing research to better understand the phenomenon and the limits at which such instability occurs. This work delved into the …

Exhaust Manifold Pressure As Engine Tuning Parameter, Kieran Truth Cunningham, Adam Sullivan Mathews, Connor Richard Smullen

Mechanical Engineering

In this project, the exhaust manifold absolute pressure (EMAP) of a 1986 Toyota Corolla was analyzed across a variety of load cases and was compared with the mass air flow (MAF) of the intake, simultaneously. Correlations were found in the trends of EMAP and MAF sensor readings that may prove helpful in tuning engines that have difficulty in accommodating a MAF sensor. These correlations were found in areas of the powerband where aftermarket tuned engines typically have poor airflow sensing. An equation was developed to spoof MAF input using EMAP and other engine operating parameters.

Electric Vehicles Contribute To China's Energy Security And Carbon Peaking And Carbon Neutrality, Jianfeng Guo, Xuemei Zhang, Qi Cao, Fu Gu

Bulletin of Chinese Academy of Sciences (Chinese Version)

The current international situation is complicated and unstable, and China is in the midst of an important economic transition as it deals with the twin concerns of energy security and carbon peaking and carbon neutrality (referred to as dual carbon goals). Although the dual carbon goals aim a strong emphasis on energy security, certain emission reduction strategies will place restrictions on energy security that is directly connected, such as energy supply and grid load, making it challenging to simultaneously fulfill the optimization goal. China now has the task of figuring out how to rationalize and optimize the coordinated promotion of …

Investigating The Effects Of Alcohol Consumption On Manual And Automated Driving: A Systematic Review, Miaomiao Dong, Yuni Lee, Jackie Cha, Gaojian Huang

Mineta Transportation Institute

There are direct correlations between drunk driving and car-related injuries, disabilities, and death. Autonomous vehicles (AVs) may provide useful driver support systems to prevent or reduce road accidents. However, AVs are not yet fully automated and require human drivers to take over the vehicle at times. Therefore, understanding how alcohol affects driving performance in both manual and automated driving is important because manual drives may offer insights into the takeover process in AVs. A systematic review of 53 articles from eight databases was conducted. Findings were categorized based on the human information processing model, which can be extended to the …

Enhancing Bridge Resilience And Overheight Vehicle Mitigation Through Innovative Sacrificial Cushion Systems, Aly Mousaad Aly, Marc Hoffmann

Faculty Publications

Transportation departments have made significant strides in addressing the challenges posed by the increasing weights of trucks on bridges. While there is a growing awareness of overheight vehicle collisions with bridges, implementing effective countermeasures remains limited. The susceptibility of bridges to damage from such collisions is on the rise, further exacerbated by unpredictable lateral impact forces. This study employs nonlinear impact analysis to assess the response of an unprotected vehicle-girder model, yielding realistic deformation outcomes comparable to observed impacts on the US-61 bridge. Predictions for a truck traveling at 112.65 km/h indicate deformations of 0.229 m, 0.161 m, and 0.271 …

Accelerating The Transition - Understanding And Addressing Barriers To Consumer Adoption Of Tesla Electric Vehicles., Jyothin Micheal

Business ETD Collections

This research investigates the key influences on adoption of electric vehicles (EVs): focusing on consumer perceptions, advances in technology and government incentives characteristics through Tesla. The study looks at the challenges to EV acceptance, such as charging infrastructure, cost and range anxiety through both qualitative and quantitative means along with potential motivators for adoption such as environmental benefits, financial incentives, technology advances. Consumer awareness, government policies and brand influence are identified having a High effect on EV adoption whereas work-place incentives have an Intermediate effect with high priority to Next. Key challenges are limited charging infrastructure and high upfront costs, …

Dynamics Of Separated Flows In Diffusers With Vortex Generators, Sandeep Eldho James

Mechanical and Aerospace Engineering Dissertations - Archive

Flow through curved diffusers is complicated due to the possibility of flow separation and secondary flows. Vortex generators (VGs) are a class of passive flow separation control devices used to improve the flow quality in curved diffusers by suppressing flow separation. However, the literature review demands an in-depth investigation on the physical mechanisms related to flow separation control. Thus, this study aims to improve the understanding of the underlying flow physics associated with VG-induced flow separation control in confined flows. The chosen geometry for this study is a well-documented asymmetric diffuser which exhibits a mild flow separation.

The theoretical formulation …

Undergraduate Research On 5g Propagation Analysis In Naval Ship Environment, Otilia Popescu, Dimitrie Popescu, Murat Kuzlu

Engineering Management & Systems Engineering Faculty Publications

Wireless communication systems have experienced rapid advancements over the last decade, with 5G systems becoming the regular standards and 6G systems being under development. However, the naval ship environment still requires more study due to the special indoor characteristics of the spaces below the deck, where the metal structures strongly impact the propagation characteristics, being prone to signal degradation, dead spots, and unreliable connectivity. This paper presents the research work conducted by a team of undergraduate students from Electrical and Computer Engineering (ECE) and Electrical Engineering Technology (EET) majors. The work was a partnership between Old Dominion University engineering programs …

Kinodynamic Motion Planning For A System With Squid Dynamics, Logan E. Beaver, Cong Wei, Wei-Kuo Yen

Mechanical & Aerospace Engineering Faculty Publications

This paper introduces a path planning algorithm for a system with squid dynamics in a cluttered environment. We capture the complex interactions of fin, arms, and body patterning by analyzing experimental data collected from observing squid motion. We extract nine motion primitives to build the control sequence for a time-optimal trajectory. This task is formulated as a mixed-integer program, and we generate the minimum-time trajectory using a sample-based approach. Numerical simulations illustrate the efficacy of this strategy and motivate ongoing and future efforts to exploration of squid motion features, improvement of the modeling, and experimental demonstrations of the motion planning …

Enhancement Of The Performance And Emission Attributes For The Diesel Engine Using Diesel-Waste Cooking Oil Biodiesel And Graphene Oxide Nanofluid Blends Through Response Surface Methodology, Medhat Elkelawy Prof. Dr. Eng., E A El Shenawy, Hagar Alm-Eldin Bastawissi, Mahmoud M. Shams

Mansoura Engineering Journal

This study examined how diesel fuel and waste-cooked oil (WCO) biodiesel blends added by various concentrations of graphene oxide (GO) nanoparticles can effect on the performance and emission characteristics of constant-speed, four-stroke, single-cylinder, water-cooled diesel engines. The GO nanoparticles concentrations are 50,100 and 150 ppm dispersed in different diesel-WCO biodiesel blends are pure diesel fuel (B0), 20% WCO biodiesel and 76% diesel fuel (B20), and 40% WCO biodiesel and 56% diesel fuel (B40). In addition 4% toluene in all blends which used as a surfactant. The diesel engine fueled with these blends and operated at various engine loads are 2, …

Development And Evaluation Of Blind Spot Detection Safety System Based On 2d-Lidar Technology As An Optimization For Adas Systems, Timothy J. Sutton

Honors College Theses

Distracted driving poses a significant safety hazard and will only exacerbate as the number of modern-day distractions increases. To mitigate this problem, Advanced Driver Assistance Systems (ADAS) features, such as blind spot detection, have been pivotal for the safer operation of vehicles. Towards the same objective, the goal of this research is to utilize 2D LiDAR sensors to create a blind spot detection system that will detect objects and surfaces that are outside of the driver’s field of view. A comparative analysis was conducted by developing a 2D LiDAR-based system utilizing NVIDIA Jetson Orion Nano and Python alongside an ultrasonic-based …

V2i-Based Adaptive Collision Avoidance For Safety And Traffic Efficiency, Vaishnavi Balambeed

Dissertations, Master's Theses and Master's Reports

To leverage the growing communication and connectivity among modern vehicles, Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I) systems are increasingly being used to implement active safety applications. However, current research often overlooks the impact of algorithms such as collision avoidance on traffic flow efficiency. This work investigates the adaptation of a collision avoidance algorithm implemented in V2I to incorporate a variable time headway and spacing control strategy. The proposed approach aims to maintain higher average speeds among vehicles, lower individual vehicle’s waiting, and travel times in the vicinity of the infrastructural unit while simultaneously avoiding collisions; thereby enhancing both safety and traffic …

Modeling Coupled Driving Behavior During Lane Change: A Multi-Agent Transformer Reinforcement Learning Approach, Hongyu Guo, Mehdi Keyvan-Ekbatani, Kun Xie

Civil & Environmental Engineering Faculty Publications

In a lane change (LC) scenario, the lane change vehicle interacts with surrounding vehicles. The interactions not only affect their driving behaviors but also influence the traffic flow. This study aims to model the coupled behavior of the lane changer and the follower in the target lane during LC. Large-scale real-world connected vehicle (CV) data from the Safety Pilot Model Deployment (SPMD) program are used to extract LCs and study vehicle interactions. A multi-agent Transformer-based deep deterministic policy gradient (MA-TDDPG) method is proposed to model the coupled behaviors during LC. The multi-agent framework can handle the multiple agents’ behaviors with …

Bv2trs Appraiser Model: Enforcing Bharat Version2 In Tree Soft Modelling For Appraising E-Mobility Hurdles, Mona Mohamed, Florentin Smarandache, Michael Gr. Voskoglou

Branch Mathematics and Statistics Faculty and Staff Publications

Electric vehicles (EVs) are being introduced to lessen greenhouse gas (GHG) emissions, air pollution, and reliance on fossil fuels. As a result of the government's aggressive promotion of EVs and rising environmental consciousness, EVs are quickly rising to the top of the low-carbon transportation market. Several viewpoints suggested that shifting to electric vehicles has been seen as a potential way to achieve sustainable mobility. Nevertheless, many studies discussed the obstacles and hurdles that obstruct the embracing of various electric-mobility (E-mobility) as EVs and electric-scooters (E-scooters) as eco-friendly means. Herein, we discussed these hurdles and determined them through surveys for prior …

Development Of A Solidworks Api, Andrew Magyar

Williams Honors College, Honors Research Projects

With the current advancements in CAD software, and precision of modern motors, we believe that a new way to communicate from hardware to software is possible. This report details the steps we have taken to attempt just that. The essential idea behind this is that modern controls for robotics are not as user friendly as they can be. The general action taken is to create an API for SolidWorks that connects it to the other necessary controller software and makes it so that a robot, and its exact current position, can be changed simply and intuitively from SolidWorks. Furthermore, the …

Adjustable Load On Cvt Driven Project, Elijah Saxton, Colin Mcconnell, Trent Bolek, Caleb Malboeuf, Alexander Rawson

Williams Honors College, Honors Research Projects

SAE Baja, also known as Baja SAE (Society of Automotive Engineers Baja), is a series of collegiate design competitions organized by the Society of Automotive Engineers (SAE). These competitions challenge teams of students to design, build, and race off-road vehicles that can withstand rough terrain and perform in various dynamic events. The objective of this Senior Design Project is to design, manufacture, and test an adjustable driven Continuous Variable Transmission (CVT) pulley to adjust the preload on the spring. This will allow easier adjustment on the CVT preload at smaller increments. This design could be used for future Zips Baja …

Schaeffler E-Axle Value Engineering, Andrew Powers

Williams Honors College, Honors Research Projects

This project aims to design a manufacturable E-Axle end housing that improves system performance while reducing cost. The project is focused on utilizing Schaeffler's manufacturing competencies to achieve a simple assembly with a significant reduction in cost per part, while using existing machines or processes within the company. The design development process will follow the conceptual design stage through Finite Element Analysis and classical engineering calculations. Cross-functional design reviews will be conducted to ensure that agreement can be reached on the manufacturing feasibility of the design. Concepts will be entered in a decision analysis sheet to identify the best one …

Extending Trailer, Alex Grove

Williams Honors College, Honors Research Projects

The goal of this research project is to revolutionize the convenience in towable transportation. This innovative design aims to enhance the versatility of pull-behind trailers by incorporating an extendable feature, allowing users to effortlessly adjust the length according to their specific needs. Whether navigating tight spaces or accommodating extra cargo, our trailer adapts to diverse situations, providing unmatched flexibility. In addition to its adjustable length, the trailer is engineered to be compactable, addressing the storage constraints often faced by users with limited space. The collapsible design ensures easy storage without compromising on functionality, making it an ideal solution for individuals …

Electrification Of A Heavy-Duty Off-Road Material Handler: Energy Savings And Emission Reductions, Bryant Goodenough

Dissertations, Master's Theses and Master's Reports

Federal regulations are driving the adoption of electrification technologies to reduce carbon dioxide equivalent (CO₂e) emissions, a metric that quantifies the global warming potential of various greenhouse gases in terms of carbon dioxide (CO₂). Although no specific CO₂ regulations exist for heavy-duty off-road machines, future reductions are likely, given stricter emissions standards for on-road vehicles. The heavy-duty off-road sector offers significant fuel-saving potential, as its focus has traditionally been on reliability and performance rather than fuel efficiency. This dissertation examines fuel and CO₂e savings opportunities on a heavy-duty off-road material handler, the Pettibone …

Investigation Of Operational Parameter Differences Between The Standard Ron Test Method And Knock-Limited Modern Spark-Ignition Engine Operation, Alexander Hoth

Dissertations, Master's Theses and Master's Reports

Octane numbers (ONs) are used worldwide to rate the knock propensity of gasoline-like fuels for spark-ignition engines, making ONs the leading indicator of fuel quality for commercial distribution. The ONs were established 90 years ago and have only received minor changes compared to significant advancements in modern engine operation and fuel composition. This has resulted in discrepancies between knock-limited modern engine operation and standard ON ratings. This dissertation used a standard CFR octane rating engine at Argonne National Laboratory that was instrumented with modern combustion research tools to investigate key differences between the Research Octane Number (RON) rating conditions and …

Application Of Fusion Based Deep Learning Models To Improve Millimeter Wave Beamforming, Abishek Subramanian

Dissertations, Master's Theses and Master's Reports

This study addresses the challenge of selecting millimeter Wave (mmWave) beamforming pairs for vehicle-to-infrastructure (V2I) communication, to mitigate latency in highly dynamic vehicular environments. We investigate the use of out-of-band sensor data as side information to model mmWave ray tracing paths and predicting a subset of top-K optimal beamforming pairs for efficient and low-latency searches. Unimodal-Fusion Deep Learning (F-DL) networks was applied to enhance mmWave beamforming process. We started by first investigating the centralized architecture, and then explored a novel distributed architecture through federated learning to minimize resource and latency overheads. The distributed architecture incorporates two biased client selection strategies: …