Automotive Engineering Commons^™

Bayesian Assembly Tool For Intelligent Digital Twin Selection, Shishir Sharma

All Theses

Digital twins can be used for system performance optimization, health monitoring, predictive maintenance, and investigating system anomalies. A ground vehicle digital twin may be assembled using representations of the subsystem models (tires, suspension system, powertrain, etc.) of different fidelity. Lower fidelity Digital Twins have relatively simpler design and physics, hence are generally computationally less expensive, but may not represent the physical system accurately. On the contrary, higher fidelity Digital Twins are generally more precise in their ability to represent the physical system, but due to complexity, are usually computationally more demanding. This thesis describes the application of Bayesian Classification within …

Increasing The Number Of Injections Per Cycle In A Gasoline Compression Ignition Strategy: An Experimental Study, Joshua Murray

All Theses

Gasoline Compression Ignition (GCI) is an advanced compression ignition strategy which utilizes the high octane number of gasoline to improve diesel soot and NOx emissions by enabling partially premixed injections of fuel. GCI work in the literature typically uses single, double, or triple injection strategies, with higher numbers of injections noted for their ability to achieve low MPRRs, improved soot and NOx emissions, and higher efficiency. Thus, this study extends the literature by evaluating quadruple and quintuple injection strategies for continued improvement in engine efficiency and emissions.

The experiments in this work are conducted on a heavy-duty Detroit Diesel DD13 …

Study On The Knock Resistance Offered By Thermally Stratifying Water Injections In A Single Cylinder Spark Ignition Engine, Aditya Datar

All Theses

Stochastic end-gas autoignition in SI engines, commonly called ‘knock’, limits attainable engine efficiencies. Multiple pathways to extend SI engine operation into knock-limited regions have been studied, including direct water injection (DWI). This study employs single-cylinder engine experiments and modeling to investigate the knock resistance offered by compression stroke water injections, which have shown to thermally stratify the cylinder in HCCI. In SI, thermally stratifying injections are expected to forcibly widen the cylinder temperature distribution by preferentially cooling the cylinder periphery. The end-gas is in the cylinder periphery; therefore, a cooler end-gas would result in longer ignition delays, thus providing knock …

Tradespace Exploration For Multiple Collaborative Vehicles, Mrunal Deshmukh

All Theses

Modern military operations demand systems that adapt to uncertain, rapidly changing missions across diverse terrains. Traditional single-platform vehicle design is insufficient for such complexity. This research introduces a hierarchical tradespace exploration framework for designing and evaluating families of heterogeneous ground vehicles under a System-of-Systems (SoS) architecture. The framework treats vehicle design as a co-optimization problem, where a “parent” vehicle (e.g., a Squad Multipurpose Equipment Transport) coordinates specialized “child” vehicles for reconnaissance, amphibious tasks, terrain traversal, and stealth missions. Unlike conventional approaches that optimize vehicles individually, this study emphasizes collaborative performance, resource sharing, and adaptability at the family level. Central to …

Decision Field Theory For Human-Multi-Robot Collaboration: Human-Centric Decision-Making For Multi-Robot Systems, Ryan Mbagna Nanko

All Theses

At first glance, choosing between an apple and an orange appears to be a straightforward matter of personal taste; however, this seemingly simple preference opens a window into the multifaceted world of decision-making, revealing the complex interplay of cognitive processes, psychological, and behavioral-economic principles that guide our choices \cite{bandyopadhyayRoleAffectDecision2013}. By unpacking these nuanced perspectives, we uncover insights that can drive more effective human-robot interaction and collaboration.

Modeling human cognition requires understanding the evolution of choice utility and the influence of emotions. Decision Field Theory (DFT) stands out by capturing the fluctuating nature in human preferences over time, explaining why choices …

Striking A Balance: Market Shock & Responses In Automotive Components Manufacturing, Emma Lane Mcgahey

All Theses

This thesis examines the effects of extreme market shocks on supply chain dynamics within the automotive industry. Through an analysis of demand data from an automotive manufacturer to its component suppliers (January 2018 to May 2024), the study investigates the relationship between market shocks and supply chain responses, providing insights into how auto components inventory management handles downstream responses to market shocks. With supporting public data—from FRED, BLS, and the U.S. Census Bureau resources—we explore two primary relationships: the impact of market shocks on the Average Standard Deviation of Demand (SDO) and the effect of demand variability on expedited pricing …

Experimental Study On The Impact Of Low Thermal Inertia Thermal Barrier Coatings On Ppci-Diffusion Gci Combustion, Kunal Vedpathak

All Theses

The application of thermal barrier coatings (TBCs) has been studied in homogenous charge compression ignition (HCCI), conventional diesel combustion (CDC), and spark ignition (SI). Gasoline compression ignition (GCI) combines the low soot and NOx emissions of HCCI with combustion controllability through fuel stratification. GCI has become an interesting prospect due to the reduction in gasoline consumption due to the electrification and hybridization of the light-duty sector. It can be used as a preferred combustion mode in heavy-duty engines to reduce emissions with minimal modifications. GCI exhibits better combustion efficiency than HCCI. Advances in material technology have combined low thermal conductivity …

Creation And Validation Of A Novel Bayesian Calibration Method With Griddy Gibbs Sampling, Hannah Stewart

All Theses

Computer models of physical systems are widely used in lieu of, or in tandem with, experimental testing. It is critical to verify the accuracy of computer models through the process of calibration. Typical calibration methods are often computationally expensive and therefore cannot be performed in real time. This thesis presents a novel Bayesian calibration method using a Griddy Gibbs sampling algorithm to improve calibration speeds. This method was verified in two applications: a location-dependent dataset in the heat transfer analysis of an engine piston, and time-dependent tire forces in a drum test. The proposed method was directly compared to a …

Safe Navigation Of Quadruped Robots Using Density Functions, Andrew Zheng

All Theses

Safe navigation of mission-critical systems is of utmost importance in many modern autonomous applications. Over the past decades, the approach to the problem has consisted of using probabilistic methods, such as sample-based planners, to generate feasible, safe solutions to the navigation problem. However, these methods use iterative safety checks to guarantee the safety of the system, which can become quite complex. The navigation problem can also be solved in feedback form using potential field methods. Navigation function, a class of potential field methods, is an analytical control design to give almost everywhere convergence properties, but under certain topological constraints and …

Experimental Investigation Of Low Thermal Inertia Thermal Barrier Coatings For Spark Ignition Engines, John Gandolfo

All Theses

The application of thermal barrier coatings (TBCs) in spark ignition (SI) engines has historically been avoided due to the knock penalty associated with higher surface temperatures induced by the ceramic layer. However, advances in low thermal inertia coatings (i.e., temperature swing coatings) that combine low thermal conductivity with low volumetric heat capacity can prevent excessively high surface temperatures during the intake stroke and reduce or avoid knock while improving performance and efficiency. This thesis experimentally evaluates the effectiveness of these low thermal inertia coatings in a single-cylinder research engine representative of modern SI engines.

First, four pistons coated with a …

Life Cycle Energy Assesment Of Advanced Fiber Reinforced Composite Design And Manufacturing Methodologies, Urjit Lad

All Theses

Automotive industry at large is focused on vehicle light-weighting since a 6%-8% increase in fuel efficiency can be achieved with a 10% reduction in vehicle weight [1]. With the growing demand for cost-effective and sustainable light weighting of automobile structures, interest has increased in the application of fiber reinforced plastic (FRP) composites for use in the Body-in-White (BiW), which can account for up to 40% of the total vehicle weight. Traditional FRP composite manufacturing processes like vacuum assisted resin transfer molding, autoclave consolidation or use of automated fiber placement have been successfully used for marine and aerospace applications. However, these …

Virtual Prototyping And Validation For Autonomous Assistive Mobility, Amogh Venkataramana Reddy

All Theses

Physical disability in humans is something that no one has control over. It is catastrophic for people to experience it, and sometimes hinders them from enjoying the essence of life. Though disability is something people have no control over, they do have control on how they can go forward and make life beautiful and meaningful. Wheelchairs have helped people with disabilities in mobility, allowing them to move around with the help of others or sometimes on their own. This research will focus on development of an autonomous assistive mobility robot to help the disabled using virtual prototyping tools for development …

Multiphysics Diesel Aftertreatment System Modeling For Reduced Emissions From Hybrid Electric Heavy-Duty Powertrains, Uday Srivastav

All Theses

Hybridization of heavy-duty on-road vehicles presents an opportunity to significantly reduce internal combustion engine emissions in real-world operation. These gains can be realized through the coordination of the electric drive, engine, and aftertreatment systems. Accurate Multiphysics models of all powertrains sub-systems are required to achieve the goal of reduced emissions. This research aims to develop a model of a highly complex diesel engine aftertreatment system. This study focuses on utilizing transient data for calibration and validation of the aftertreatment system and reducing the run time when compared to real-time experiments. The calibration focuses on two physical phenomena, thermal behavior and …

Integrated Energy-Aware Motion Planning And Charge Scheduling Of Unmanned Aerial Vehicles, Hayleyesus Alemayehu

All Theses

The growing demand for unmanned aerial vehicles (UAVs) is driven by their operational convenience, cost-effectiveness, availability, and adaptability to various scenarios. In energy-constrained environments, optimizing energy consumption and ensuring a continuous power supply for UAVs is crucial for mission success. The objective of this thesis is to address this issue by integrating energy-aware motion planning and charge scheduling for UAVs by utilizing a charger hosted on an unmanned ground vehicle (UGV), whose rendezvous locations and routes are jointly computed to minimize overall energy consumption.

This thesis proposes a hierarchical trajectory and control framework comprising local and global planners for each …

Supporting Us Army Next-Generation Ground Vehicle Simulation Modeling Using An Integrated Ontology Suite, Edward Louis

All Theses

The development of the US Army’s next-generation of ground vehicle systems is supported by simulations that predict vehicle performance and inform engineering design choices in the design and acquisition process. In this paper, we describe the development of an Integrated Ontology Suite to support modeling and simulation of next generation military ground vehicles. The ontology suite is intended to address model reuse challenges and increase the shared understanding of ground vehicle system simulations. It is intended to function in a Model Library structure that stores, documents, assembles, and executes vehicle simulations. The ontology suite consists of four domain ontologies: Vehicle …